Predicting heavy metals' adsorption edges and adsorption isotherms on MnO2 with the parameters determined from Langmuir kinetics

Although surface complexation models have been widely used to describe the adsorption of heavy metals, few studies have verified the feasibility of modeling the adsorption kinetics, edge, and isotherm data with one pH-independent parameter. A close inspection of the derivation process of Langmuir isothermrevealed that the equilibriumconstant derived from the Langmuir kinetic model, K_S-kinetic, is theoretically equivalent to the adsorption constant in Langmuir isotherm, K_S-Langmuir. The modified Langmuir kinetic model (MLK model) and modified Langmuir isothermmodel (MLImodel) incorporating pH factor were developed. The MLKmodel was employed to simulate the adsorption kinetics of Cu(II), Co(II), Cd(II), Zn(II) and Ni(II) on MnO₂ at pH 3.2 or 3.3 to get the values of K_S-kinetic. The adsorption edges of heavy metals could be modeled with the modified metal partitioning model (MMP model), and the values of K_S-Langmuirwere obtained. The values of K_S-kinetic and K_S-Langmuir are very close to each other, validating that the constants obtained by these two methods are basically the same. The MMP model with K_S-kinetic constants could predict the adsorption edges of heavy metals on MnO₂ very well at different adsorbent/adsorbate concentrations. Moreover, the adsorption isotherms of heavy metals on MnO₂ at various pH levels could be predicted reasonably well by the MLI model with the K_S-kinetic constants.     

Removal of tetracycline from aqueous solution by a Fe3O4 incorporated PAN electrospun nanofiber mat

Pollution of antibiotics, a type of emerging contaminant, has become an issue of concern,due to their overuse in human and veterinary application, persistence in environment and great potential risk to human and animal health even at trace level. In this work, a novel adsorbent, Fe3O4 incorporated polyacrylonitrile nanofiber mat(Fe-NFM), was successfully fabricated via electrospinning and solvothermal method, targeting to remove tetracycline(TC), a typical class of antibiotics, from aqueous solution. Field emission scanning electron microscopy and X-ray diffraction spectroscopy were used to characterize the surface morphology and crystal structure of the Fe-NFM, and demonstrated that Fe-NFM was composed of continuous, randomly distributed uniform nanofibers with surface coating of Fe3O4 nanoparticles. A series of adsorption experiments were carried out to evaluate the removal efficiency of TC by the Fe-NFM. The pseudo-second-order kinetics model fitted better with the experimental data. The highest adsorption capacity was observed at initial solution p H 4 while relative high adsorption performance was obtained from initial solution p H 4 to 10. The adsorption of TC on Fe-NFM was a combination effect of both electrostatic interaction and complexation between TC and Fe-NFM. Freundlich isotherm model could better describe the adsorption isotherm. The maximum adsorption capacity calculated from Langmuir isotherm model was 315.31 mg/g. Compared to conventional nanoparticle adsorbents which have difficulties in downstream separation, the novel nanofiber mat can be simply installed as a modular compartment and easily separated from the aqueous medium, promising its huge potential in drinking and wastewater treatment for micro-pollutant removal.     

Efficient adsorption of Mn(Ⅱ) by layered double hydroxides intercalated with diethylenetriaminepentaacetic acid and the mechanistic study

In this study, greatly enhanced Mn(II) adsorption was achieved by as-synthesized diethylenetriaminepentaacetate acid intercalated Mg/Al layered double hydroxides(LDHsDTPA). The adsorption capacity of LDHs-DTPA was 83.5 mg/g, which is much higher than that of LDHs-EDTA(44.4 mg/g), LDHs-Oxalate(21.6 mg/g) and LDHs(28.8 mg/g). The adsorption data of aqueous Mn(II) using LDHs-DTPA could be well described by the pseudosecond order kinetics and Langmuir isotherm model. Thermodynamics study results also showed that the adsorption process of Mn(II) by LDHs-DTPA was exothermic as indicated by the negative ΔH value. Furthermore, based on the structural, morphological and thermostable features, as well as FT-IR and XPS characterizations of LDHs-DTPA and the pristine LDHs, the adsorption mechanism of Mn(II) was proposed. The carboxyl groups of DTPA were proposed to be the main binding sites for Mn(II), and the hydroxyl groups of LDHs also played a minor role in the adsorption process. Among the three common regeneration reagents, 0.1 mol/L Na_2CO_3 was the best for reusing LDHs-DTPA in Mn(II)adsorption. Besides, the Mn(II) adsorption performance could be hindered in the presence of typical inorganic ions, especially cations. Further specific modifications of LDHs-DTPA are suggested to get more selective adsorption of Mn(II) in practical applications.     

Thermodynamics and kinetics of cadmium adsorption onto oxidized granular activated carbon

Cadmium sorption behavior of granular activated carbon oxidized with nitric acid was systematically studied by sets of the equilibrium and time-based experiments under various conditions.The cadmium adsorption capacity of oxidized granular activated carbon enlarged with an increase in pH,and reduced with an increase in ionic strength.Experimental data were evaluated to find out kinetic characteristics.Adsorption processes were found to follow pseudo-second order rate equation.Adsorption isotherms correlate well with the Langmuir isotherm model and the maximum sorption capacity of cadmium evaluated is 51.02μmol/g.Thermodynamic parameters were calculated based on Van't Hoff equation.Equilibrium constant Kd was evaluated from Freundlich isotherm model constants,Langmnir isotherm model constants,and isotherms,respectively.The average change of standard adsorption heatΔH~0 was -25.29 kJ/mol.NegativeΔH~0 andΔG~0 values indicate the adsorption process for cadmium onto the studied activated carbon is exothermic and spontaneous.The standard entropyΔS~0 was also negative,which suggests a decrease in the freedom of the system.     

Phosphate removal from domestic wastewater using thermally modified steel slag

This study was performed to investigate the removal of phosphate from domestic wastewater using a modified steel slag as the adsorbent. The adsorption effects of alkalinity, salt, water,and thermal modification were investigated. The results showed that thermal activation at 800℃ for 1 hr was the optimum operation to improve the adsorption capacity. The adsorption process of the thermally modified slag was well described by the Elovich kinetic model and the Langmuir isotherm model. The maximum adsorption capacity calculated from the Langmuir model reached 13.62 mg/g. Scanning electron microscopy indicated that the surface of the modified slag was cracked and that the texture became loose after heating. The surface area and pore volume did not change after thermal modification. In the treatment of domestic wastewater, the modified slag bed(35.5 kg) removed phosphate effectively and operated for 158 days until the effluent P rose above the limit concentration of 0.5 mg/L. The phosphate fractionation method, which is often applied in soil research, was used to analyze the phosphate adsorption behavior in the slag bed. The analysis revealed that the total contents of various Ca–P forms accounted for 81.4%–91.1%, i.e., Ca10–P 50.6%–65.1%, Ca8–P 17.8%–25.0%,and Ca2–P 4.66%–9.20%. The forms of Al–P, Fe–P, and O–P accounted for only 8.9%–18.6%. The formation of Ca10–P precipitates was considered to be the main mechanism of phosphate removal in the thermally modified slag bed.     

A fully bio-sourced adsorbent of heavy metals in water fabricated by immobilization of quinine on cellulose paper

The fabrication of a fully bio-sourced adsorbent of Cd(Ⅱ)by covalent immobilization of quinine on cellulose paper is described.The double bond of commercially available quinine was converted to a terminal alkyne function which was reacted with cellulose paper,chemically modified with azide functions,through a 1,3-dipolar cycloaddition,leading to Cell-Quin.The adsorption efficiency of Cell-Quin was investigated to determine the optimal pH,contact time and dose of adsorbent,ultimately leading to high levels of removal.The mechanism of adsorption of Cell-Quin was deeply rationalized through kinetic experiments and isotherm modeling.We also showed that Cell-Quin could adsorb other heavy metals such as Cu(Ⅱ),Pb(Ⅱ),Ni(Ⅱ)and Zn(Ⅱ).     

Adsorption of heavy metal ions from aqueous solution by carboxylated cellulose nanocrystals

A novel nanoadsorbent for the removal of heavy metal ions is reported.Cotton was first hydrolyzed to obtain cellulose nanocrystals(CNCs).CNCs were then chemically modified with succinic anhydride to obtain SCNCs.The sodic nanoadsorbent(NaSCNCs) was further prepared by treatment of SCNCs with saturated NaHCO 3 aqueous solution.Batch experiments were carried out with SCNCs and NaSCNCs for the removal of Pb 2+ and Cd 2+.The effects of contact time,pH,initial adsorption concentration,coexisting ions and the regeneration performance were investigated.Kinetic studies showed that the adsorption equilibrium time of Pb 2+ and Cd 2+ was reached within 150 min on SCNCs and 5 min on NaSCNCs.The adsorption capacities of Pb 2+ and Cd 2+ on SCNCs and NaSCNCs increased with increasing pH.The adsorption isotherm was well fitted by the Langmuir model.The maximum adsorption capacities of SCNCs and NaSCNCs for Pb 2+ and Cd 2+ were 367.6 mg/g,259.7 mg/g and 465.1 mg/g,344.8 mg/g,respectively.SCNCs and NaSCNCs showed high selectivity and interference resistance from coexisting ions for the adsorption of Pb 2+.NaSCNCs could be efficiently regenerated with a mild saturated NaCl solution with no loss of capacity after two recycles.The adsorption mechanisms of SCNCs and NaSCNCs were discussed.     

The effect of interaction between Bacillus subtilis DBM and soil minerals on Cu(Ⅱ) and Pb(Ⅱ) adsorption

The effects of interaction between Bacillus subtilis DBM and soil minerals on Cu(Ⅱ)and Pb(Ⅱ)adsorption were investigated.After combination with DBM,the Cu(Ⅱ)and Pb(Ⅱ)adsorption capacities of kaolinite and goethite improved compared with the application of the minerals independently.The modeling results of potentiometric titration data proved that the site concentrations of kaolinite and goethite increased by 80%and 30%,respectively after combination with DBM.However,the involvement of functional groups in the DBM/mineral combinations resulted in lower concentrations of observed sites than the theoretical values and led to the enhancement of desorption rates by NH_4NO_3 and EDTA-Na_2.The DBM-mineral complexes might also help to prevent heavy metals from entering DBM cells to improve the survivability of DBM in heavy metal-contaminated environments.During the combination process,the extracellular proteins of DBM provided more binding sites for the minerals to absorb Cu(Ⅱ)and Pb(Ⅱ).In particular,an especially stable complexation site was formed between goethite and phosphodiester bonds from EPS to enhance the Pb(Ⅱ)adsorption capacity.So,we can conclude that the DBM–mineral complexes could improve the Cu(Ⅱ)and Pb(Ⅱ)adsorption capacities of minerals and protect DBM in heavy metal-contaminated environments.     

Removal of tetracycline from aqueous solution by a Fe3O4 incorporated PAN electrospun nanofiber mat

Pollution of antibiotics, a type of emerging contaminant, has become an issue of concern, due to their overuse in human and veterinary application, persistence in environment and great potential risk to human and animal health even at trace level. In this work, a novel adsorbent, Fe₃O₄ incorporated polyacrylonitrile nanofiber mat (Fe-NFM), was successfully fabricated via electrospinning and solvothermal method, targeting to remove tetracycline (TC), a typical class of antibiotics, from aqueous solution. Field emission scanning electron microscopy and X-ray diffraction spectroscopy were used to characterize the surface morphology and crystal structure of the Fe-NFM, and demonstrated that Fe-NFM was composed of continuous, randomly distributed uniform nanofibers with surface coating of Fe₃O₄ nanoparticles. A series of adsorption experiments were carried out to evaluate the removal efficiency of TC by the Fe-NFM. The pseudo-second-order kinetics model fitted better with the experimental data. The highest adsorption capacity was observed at initial solution pH 4 while relative high adsorption performance was obtained from initial solution pH 4 to 10. The adsorption of TC on Fe-NFM was a combination effect of both electrostatic interaction and complexation between TC and Fe-NFM. Freundlich isotherm model could better describe the adsorption isotherm. The maximum adsorption capacity calculated from Langmuir isotherm model was 315.31 mg/g. Compared to conventional nanoparticle adsorbents which have difficulties in downstream separation, the novel nanofiber mat can be simply installed as a modular compartment and easily separated from the aqueous medium, promising its huge potential in drinking and wastewater treatment for micro-pollutant removal.     

Removal of Pb(II) from aqueous solution by hydrous manganese dioxide: Adsorption behavior and mechanism

Hydrous manganese dioxide (HMO) synthesized by redox of potassium permanganate and hydrogen peroxide was used as an adsorbent for Pb(Ⅱ) removal.The specific surface area,pore volume and BJH pore diameter of the HMO were 79.31m2/g,0.07cm3/g and 3.38 nm,respectively.The adsorption equilibrium at 298K could be well described by the Langmuir isotherm equation with q max value of 352.55mg/g.The negative values of G and the positive values of H and S indicated the adsorption process was spontaneous and endothermic.The pseudo second-order equation could best fit the adsorption data.The value of the calculated activation energy for Pb(Ⅱ) adsorption onto the HMO was 38.23 kJ/mol.The uptake of Pb(Ⅱ) by HMO was correlated with increasing surface hydroxyl group content and the main adsorbed speciation was PbOH+.The final chemical state of Pb(Ⅱ) on the surface of HMO was similar to PbO.HMO was a promising candidate for Pb(Ⅱ) removal from aqueous solution.     

Selective adsorption of silver ions from aqueous solution using polystyrene-supported trimercaptotriazine resin

Trimercaptotriazine-functionalized polystyrene chelating resin was prepared and employed for the adsorption of Ag(I) from aqueous solution. The adsorbent was characterized according to the following techniques: Fourier transform infrared spectroscopy, elemental analysis, scanning electron microscopy and the Brunauer-Emmet-Teller method. The effects of initial Ag(I) concentration, contact time, solution pH and coexisting ions on the adsorption capacity of Ag(I) were systematically investigated. The maximum adsorption capacity of Ag(I) was up to 187.1 mg/g resin at pH 0.0 and room temperature. The kinetic experiments indicated that the adsorption rate of Ag(I) onto the chelating resin was quite fast in the first 60 min and reached adsorption equilibrium after 360 min. The adsorption process can be well described by the pseudo second-order kinetic model and the equilibrium adsorption isotherm was closely fitted by the Langmuir model. Moreover, the chelating resin could selectively adsorb more Ag(I) ions than other heavy metal ions including: Cu(II), Zn(II), Ni(II), Pb(II) and Cr(III) during competitive adsorption in the binary metal species systems, which indicated that it was a highly selective adsorbent of Ag(I) from aqueous solution.     

Synthesis of linear low-density polyethylene-g-poly(acrylic acid)-co-starch/organo-montmorillonite hydrogel composite as an adsorbent for removal of Pb(Ⅱ) from aqueous solutions

The purpose of this work is to remove Pb(II) from the aqueous solution using a type of hydrogel composite. A hydrogel composite consisting of waste linear low density polyethylene, acrylic acid, starch, and organo-montmorillonite was prepared through emulsion polymerization method. Fourier transform infrared spectroscopy(FTIR), Solid carbon nuclear magnetic resonance spectroscopy(CNMR)), silicon-29 nuclear magnetic resonance spectroscopy(Si NMR)), and X-ray diffraction spectroscope((XRD) were applied to characterize the hydrogel composite. The hydrogel composite was then employed as an adsorbent for the removal of Pb(II) from the aqueous solution. The Pb(II)-loaded hydrogel composite was characterized using Fourier transform infrared spectroscopy(FTIR)),scanning electron microscopy(SEM)), and X-ray photoelectron spectroscopy((XPS)). From XPS results, it was found that the carboxyl and hydroxyl groups of the hydrogel composite participated in the removal of Pb(II). Kinetic studies indicated that the adsorption of Pb(II)followed the pseudo-second-order equation. It was also found that the Langmuir model described the adsorption isotherm better than the Freundlich isotherm. The maximum removal capacity of the hydrogel composite for Pb(II) ions was 430 mg/g. Thus, the waste linear low-density polyethylene-g-poly(acrylic acid)-co-starch/organo-montmorillonite hydrogel composite could be a promising Pb(II) adsorbent.     

Removal of heavy metals from aqueous solution by sawdust adsorption

The adsorption of lead, cadmium and nicel from aqueous solution by sawdust of walnut was investigated. The effect of contact time, initial metal ion concentration and temperature on metal ions removal has been studied. The equilibrium time was found to be of the order of 60 min. Kinetics fit pseudo first-order, second-order and intraparticle diffusion models, hence adsorption rate constants were calculated. The adsorption data of metal ions at temperatures of 25, 45 and 60~C have been described by the Freundlich and Langmuir isotherm models. The thermodynamic parameters such as energy, entropy and enthalpy changes for the adsorption of heavy metal ions have also been computed and discussed. Ion exchange is probably one of the major adsorption mechanisms for binding divalent metal ions to the walnut sawdust. The selectivity order of the adsorbent is Pb（I1）~Cd（II）〉Ni（I1）. From these results, it can be concluded that the sawdust of walnut could be a good adsorbent for the metal ions from aqueous solutions.     

Comparison study of phosphorus adsorption on different waste solids: Fly ash, red mud and ferric–alum water treatment residues

The adsorption of phosphorus(P) onto three industrial solid wastes(fly ash, red mud and ferric–alum water treatment residual(FAR)) and their modified materials was studied systematically via batch experiments. Compared with two natural adsorbents(zeolite and diatomite), three solid wastes possessed a higher adsorption capacity for P because of the higher Fe, Al and Ca contents. After modification(i.e., the fly ash and red mud modified by FeCl_3 and FARs modified by HCl), the adsorption capacity increased, especially for the modified red mud, where more Fe bonded P was observed. The P adsorption kinetics can be satisfactorily fitted using the pseudo-second-order model. The Langmuir model can describe well the P adsorption on all of the samples in our study. p H and dissolved organic matter(DOM) are two important factors for P adsorption. Under neutral conditions, the maximum adsorption amount on the modified materials was observed. With the deviation from pH 7, the adsorption amount decreased, which resulted from the change of P species in water and surface charges of the adsorbents. The DOM in water can promote P adsorption, which may be due to the promotion effects of humic-Fe(Al) complexes and the pH buffer function exceeds the depression of competitive adsorption.     

Removal of cadmium using MnO2 loaded D301 resin

MnO2 loaded weak basic anion exchange resin D301 （Anion exchange resin, macroreticular weak basic styrene） as adsorbent has been prepared and applied to the removal of cadmium. The adsorption characteristics have been investigated with respect to effect of pH, equilibrium isotherms, removal kinetic data, and interference of the coexisting ions. The results indicated that the Cd^2＋ could be efficiently removed using MnO2 loaded D301 resin in the pH range of 3-8 from aqueous solutions with the co-existence of high concentration of alkali and alkaline-earth metals ions. The saturate adsorption capacity of the Cd^2＋ was 77.88 mg/g. The adsorption process followed the pseudo first-order kinetics. The equilibrium data obtained in this study accorded excellently with the Langmuir adsorption isotherm.     

Comparison of Pb and Cd adsorption to the surface coatings and surficial sediments collected in Xianghai Wetland

Surface coatings and surficial sediments were obtained in four natural waters in Xianghai Wetland in China to study the role of surface coatings and surficial sediments in controlling the transporting and cycling of heavy metals in aquatic environments. Pb and Cd adsorption to the surface coatings and surficial sediments were measured under controlled laboratory conditions(mineral salts solution with defined speciation, ionic strength 0.0.5 mol/L, 25℃ and pH 6.0 for surface coatings: and 0.00.5 mol/L CaCl2 solution, 25℃ and pH 6.0 for surficial sediments). The Langmuir adsorption isotherm was applied to estimate equilibrium coefficients of Pb and Cd adsorption to the surface coatings and surficial sediments, and the component analyses of surface coatings and surficial sediments were also carried out.Correlation analyses between the maximum adsorption of Pb and Cd (Гmax) and the components in the surface coatings and surficial sediments suggested that there was a statistically significant trend for Pb and Cd adsorption(Гmax) to the surface coatings to increase with increasing in contents of Fe and Mn oxides in the surface coatings and surficial sediments. And the metal adsorption abilities of surface coatings were much stronger than those of surficial sediments, highlighting that in the same water, i.e. at the same pH and initial metal concentrations, the metals(such as lead and cadmium) in supernatant were feasible to be adsorbed by surface coatings than surficial sediments. The more importance of surface coatings than surficial sediments for adsorbing and cycling of heavy metals in aquatic environments was evidenced.     

Alkynyl carbon materials as novel and efficient sorbents for the adsorption of mercury(Ⅱ) from wastewater

For the first time, a series of alkynyl carbon materials(ACMs) were prepared via the mechanochemical reaction of CaC_2 with six polyhalogenated precursors, namely CCl_4,C_2Cl_6, C_2Cl_4, C_6Cl_6, C_6Br_6, and C_(14)H_4Br_(10)(ACM-1, ACM-2, ACM-3, ACM-4, ACM-5, and ACM-6,respectively) and used for the adsorptive removal of mercury from aqueous solutions.Based on preliminary investigations, the adsorption of mercury on ACM-5 was studied in depth. Specifically, the effect of p H on mercury adsorptivity, adsorption kinetics,thermodynamics, isotherms, and recyclability was studied. The adsorptivity of mercury on ACMs was found to be closely related to the hydrocarbon precursor, specific surface area of sorbent, and the alkynyl content. ACM-5 showed the best performance and is among the best raw carbonaceous sorbents reported so far, with a Langmuir saturated adsorption capacity of 191.9 mg g~(-1). The promising mercury adsorption performance mainly arises from the strong Lewis soft acid–soft base interactions between the alkynyl groups and mercury ions. The adsorption isotherms could be satisfactorily correlated with the Langmuir equation. The results show that the ACMs can be used as efficient sorbents for the removal of mercury and may also be useful for the adsorption of other heavy metals.     

Effect of Na+ impregnated activated carbon on the adsorption of NH4+-N from aqueous solution

Two kinds of activated carbons modified by Na+ impregnation after pre-treatments involving oxidation by nitric acid or acidification by hydrochloric acid (denoted as AC/N-Na and AC/HCl-Na, respectively), were used as adsorbents to remove NH4+-N. The surface features of samples were investigated by BET, SEM, XRD and FT-IR. The adsorption experiments were conducted in equilibrium and kinetic conditions. Influencing factors such as initial solution pH and initial concentration were investigated. A possible mechanism was proposed. Results showed that optimal NH4+-N removal efficiency was achieved at a neutral pH condition for the modified ACs. The Langmuir isotherm adsorption equation provided a better fit than other models for the equilibrium study. The adsorption kinetics followed both the pseudo second-order kinetics model and intra-particle kinetic model. Chemical surface analysis indicated that Na+ ions form ionic bonds with available surface functional groups created by pre-treatment, especially oxidation by nitric acid, thus increasing the removal efficiency of the modified ACs for NH4+-N. Na+-impregnated ACs had a higher removal capability in removing NH4+-N than unmodified AC, possibly resulting from higher numbers of surface functional groups and better intra-particle diffusion. The good fit of Langmuir isotherm adsorption to the data indicated the presence of monolayer NH4+-N adsorption on the active homogenous sites within the adsorbents. The applicability of pseudo second-order and intra-particle kinetic models revealed the complex nature of the adsorption mechanism. The intra-particle diffusion model revealed that the adsorption process consisted not only of surface adsorption but also intra-particle diffusion.     

Cadmium sorption by sodium and thiourea-modified zeolite-rich tuffs

In the present investigation, two zeolite-rich tuffs from Guaymas and El Cajon(State of Sonora), which were conditioned with a sodium chloride solution and subsequently modified with a thiourea solution, were chosen to evaluate the removal of Cd from aqueous systems. The zeolitic materials were characterized by scanning electron microscopy and X-ray diffraction. The surface area was also determined. The experiments were performed in a batch system, and the influences of p H, contact time between phases, and the concentration of Cd in the solution on the adsorption by sodium or thiourea-modified zeolite-rich tuff were investigated. It was found that the efficiency of Cd ion removal from aqueous solutions is influenced by the p H of the aqueous systems. The Cd adsorption kinetic data were well fitted to a pseudo-second-order model in all cases. The Langmuir and Langmuir–Freundlich isotherms adequately described the Cd sorption behavior by the zeolite from El Cajon pretreated with Na Cl and the zeolite from Guaymas modified with thiourea, respectively.     

Activated carbon adsorption of quinolone antibiotics in water: Performance, mechanism, and modeling

The extensive use of antibiotics has led to their presence in the aquatic environment, and introduces potential impacts on human and ecological health. The capability of powdered activated carbon(PAC) to remove six frequently used quinolone(QN) antibiotics during water treatment was evaluated to improve drinking water safety. The kinetics of QN adsorption by PAC was best described by a pseudo second-order equation, and the adsorption capacity was well described by the Freundlich isotherm equation. Isotherms measured at different p H showed that hydrophobic interaction, electrostatic interaction,and π–π dispersion force were the main mechanisms for adsorption of QNs by PAC. A p H-dependent isotherm model based on the Freundlich equation was developed to predict the adsorption capacity of QNs by PAC at different p H values. This model had excellent prediction capabilities under different laboratory scenarios. Small relative standard derivations(RSDs), i.e., 0.59%–0.92% for ciprofloxacin and 0.09%–3.89% for enrofloxacin,were observed for equilibrium concentrations above the 0.3 mg/L level. The RSDs increased to 11.9% for ciprofloxacin and 32.1% for enrofloxacin at μg/L equilibrium levels, which is still acceptable. This model could be applied to predict the adsorption of other chemicals having different ionized forms.