Silica glass modified with flavonoid derivatives for preconcentration of some toxic metal ions in water samples and their determination with ICP-MS

Quercetin (3,3^′,4^′,5,7-pentahydroxyflavone) chemically bonded through pyran rearrangement on modified controlled pore silica glass (QCPSG) with a capacity 0.213 mmol/g was used for solid phase extraction of some toxic metal and metalloid ions. The newly designed QCPSG quantitatively sorbs As(V), Cd(II), Hg(II), and Pb(II) at the pH range 7.5–8.5 after 10 min of stirring. HCl (1 mol L^???1) instantaneously elutes all the metal ions. The sorption capacity of the ion collector is 0.42, 0.46, 0.53, and 0.49 mmol g^???1 for As(V), Cd(II), Hg(II), and Pb(II), respectively, whereas the preconcentration factor is 200. The effect of NaCl, Na₂SO₄, NaF, NaBr, Na₃PO₄, and other interfering salts on the sorption of metal ions (50 μg L^???1) was reported. Analytical detection limits of As(V), Cd(II), Hg(II), and Pb(II) were 4.18, 2.44, 15.86, and 25.00 pg mL^???1, respectively. QCPSG was used in the separation of the investigated metal ions from some natural water samples collected from diverse origins followed by determination by inductively coupled plasma–mass spectrometry. The data were compared with those obtained by the standard methods of determination using atomic absorption (hydride generation, HGAAS and after solvent extraction with ammonium pyrolidine dithiocarbamate/methyl isobutyl ketone). The suggested solid phase extraction method was found accurate with no random error.     

Solid phase extraction of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions with 1-(2-thiazolylazo)-2-naphthol loaded Amberlite XAD-1180

A new method for separation and preconcentration of trace amounts of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions in various matrices was proposed. The method is based on the adsorption and chelation of the metal ions on a column containing Amberlite XAD-1180 resin impregnated with 1-(2-thiazolylazo)-2-naphthol (TAN) reagent prior to their determination by flame atomic absorption spectrometry (FAAS). The effect of pH, type, concentration and volume of eluent, sample volume, flow rates of sample and elution solutions, and interfering ions have been investigated. The optimum pH for simultaneous retention of all the metal ions was 9. Eluent for quantitative elution was 20 ml of 2 mol l(-1) HNO(3). The optimum sample and eluent flow rates were found as 4 ml min(-1), and also sample volume was 500 ml, except for Mn (87% recovery). The sorption capacity of the resin was found to be 0.77, 0.41, 0.57, and 0.30 mg g(-1) for Cu(II), Ni(II), Cd(II), and Mn(II), respectively. The preconcentration factor of the method was 200 for Cu(II), 150 for Pb(II), 100 for Cd(II) and Ni(II), and 50 for Mn(II). The recovery values for all of the metal ions were > or = 95% and relative standard deviations (RSDs) were < or = 5.1%. The detection limit values were in the range of 0.03 and 1.19 microg l(-1). The accuracy of the method was confirmed by analysing the certified reference materials (TMDA 54.4 fortified lake water and GBW 07605 tea samples) and the recovery studies. This procedure was applied to the determination of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) in waste water and lake water samples.     

Cloud point extraction–atomic absorption spectrometry for pre-concentration and determination of cadmium in cigarette samples

A new complexing agent, 2-((2-((1H-benzo[d]imidazole-2yl)methoxy)phenoxy)methyl)-1H-benzo[d]imidazole (BIMPI), was used in cloud point extraction and applied for selective pre-concentration of trace amounts of cadmium in cigarette samples. Cadmium was complexed with BIMPI in a buffer solution (pH?=?10) using Triton X-114 as surfactant and quantitatively extracted into a small volume of the surfactant-rich phase after centrifugation. Under optimized conditions (pH?=?10.0, 0.8?×?10^?4?mol?L^?1 BIMPI and 0.08 % (w/v) Triton X-114), calibration graph was linear in the range of 34.0–1,670.0 μg?L^?1. The proposed method was applied to the determination of Cd in various cigarette (tobacco) samples which gave satisfactory results.     

Solid phase extraction of Cd,Pb, Ni,Cu, and Zn in environmental samples on multiwalled carbon nanotubes

A simple and sensitive solid phase extraction (SPE) method on multiwalled carbon nanotubes (MWCNTs) is presented for the determination of cadmium, lead, nickel, copper, and zinc at trace levels combined with flame atomic absorption spectrometry. The effects of parameters like pH, sample volume, sample and eluent flow rates, eluent concentration, and volume and type of eluent on the recovery of trace elements was examined. The metals retained on the nanotube at pH 6.5 as α-benzoin oxime complexes were eluted by 10 mL 2 M HNO₃ in acetone. The influence of matrix ions on the developed method was also evaluated. The preconcentration factor of the method was found to be 50. The detection limits for Cd(II), Pb(II), Ni(II), Cu(II), and Zn(II) were found as 1.7, 5.5, 6.0, 2.3, and 2.4 μg L^?1, respectively. To test the accuracy of the method, the method was applied to TMDA-70 fortified lake water and Spinach 1570A standard reference materials. Addition recovery studies were applied to tap water and cracked wheat samples, and determination of the analyte elements was carried out in some food samples with good results.     

Effects of pH and low molecular weight organic acids on competitive adsorption and desorption of cadmium and lead in paddy soils

The bioavailability and ultimate fate of heavy metals in the environment are controlled by adsorption-desorption process. Batch equilibrium experiments were performed to assess the effects of pH and low molecular weight organic acids (LMWOAs) on competitive adsorption and desorption of cadmium and lead in paddy soils from China. The results indicated that both soils exhibited greater sorption capacity for lead (Pb) (1.37-1.61-fold) than cadmium (Cd) as estimated by the maximum sorption parameter (Q) from the Langmuir equation. The Langmuir bonding energy coefficient (b) and distribution coefficient (K (d)) were greater for Pb than for Cd, furthermore, b (binary) and K (d) (single) were greater than b (single) and K (d binary), indicating that competition for sorption sites promote the retention of both metals on more specific sorption sites. Both Cd and Pb desorption as a function of solution pH was characteristic of "S" pattern. The presence of LMWOAs inhibited Cd or Pb desorption at the low concentrations (≤0.1 mmol L(-1)) but promoted Cd and Pb desorption at higher concentrations (≥0.5 mmol L(-1) for citric acid and ≥1 mmol L(-1) for malic and oxalic acid). The two paddy soils had a greater d (Cd) than d (Pb) in the presence of LMWOAs, indicating that Cd desorption was more affected by the presence of LMWOAs in binary metal system.     

Novel solid-phase extractor based on functionalization of multi-walled carbon nano tubes with 5-aminosalicylic acid for preconcentration of Pb(II) in water samples prior to determination by ICP-OES

New solid-phase extractor (MWCNTs-5-ASA) was synthesized via covalent immobilization of 5-aminsalicylic acid onto multi-walled carbon nanotubes (MWCNs). The success of the functionalization process was confirmed using Fourier transform infrared spectroscopy, scanning electron microscope, and surface coverage determination. Batch experiments were conducted as a function of pH to explore MWCNTs-5-ASA efficiency to extract several metal ions viz., Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II). It was found that Pb(II) exhibits the highest extraction percentage with maximum adsorption capacity 32.75 mg g^?1. Its binding performance was well fitted with Langmuir sorption isotherm. On the other hand, the selective separation and preconcentration of trace Pb(II) under dynamic conditions prior to determination by inductively coupled plasma-optical emission spectrometry was investigated under different parameters. These included the rate of flow and volume of sample solution, in addition to the type of the eluate, its volume and concentration. The effect of a variety of foreign ions on the recovery percentage was also evaluated. Trace Pb(II) ions present in 500 mL aqueous solution adjusted to pH 4.0 were retained on 50 mg of MWCNTs-5-ASA and completely eluted using 4.0 mL of 2 M HNO₃. The limit of detection and the precision of the method were 0.25 ng mL^?1 and 2.8 %, respectively (N?=?5). This methodology has been applied for the determination of Pb(II) in water samples with good results.     

Correlation between soil characteristics and lead and cadmium content in the aboveground biomass of Virginia tobacco

The study was conducted on alluvial-meadow, maroon-forest soils and vertisols with Virginia tobacco. The total content of lead and cadmium is measured through decomposition by HF, HClO₄, and HNO₃ acids. A solution of 0.005 M diethylentriaminepentaacetic acid + 0.1 M triethanolamine, pH 7.3 was used for extraction of the elements’ mobile forms from soils. The preparation of plant samples was made by means of dry ashing and dissolution in 3 M HCl. An atomic absorption spectrometer “Spektra AA 220” of the Australian company Varian was used for determination of Pb and Cd content in the soil and plant samples. Certified reference materials (three soils and tobacco leaves) were also analyzed for the verification of the accuracy of Pb and Cd determination. A correlation/regression analysis was conducted between pH, humus content, total and mobile forms of lead and cadmium in the soil, and the concentration of these elements in the aboveground biomass of Virginia tobacco. It was established that there are no statistically significant dependencies determined between soil pH and lead concentration in the plant organs of Virginia tobacco. Regressional dependencies of great significance were determined between the humus content, total and mobile lead and cadmium in the soil, and the element concentration in the leaves of the three harvesting zones.     

Surfactant-mediated complex formation for determination of traces amounts of zinc, cadmium, and lead with 4-(2-thiazolylazo) resorcinol and chemometric methods

The partial least squares modeling is a powerful multivariate statistical tool applied to the spectrophotometric simultaneous determination of the divalent ions of zinc, cadmium, and lead based on the formation of their complexes with 4-(2-thiazolylazo) resorcinol in surfactant media. The linear concentration range for zinc, cadmium, and lead were 0.10-1.31, 0.148-1.92, and 0.148-3.70 mg L(?-1), respectively. The experimental calibration set was composed of 36 sample solutions using a mixture design for three component mixtures. The absorption spectra were recorded from 380 through 650 nm. The effect of pH on the sensitivity in determination of zinc, cadmium, and lead was studied in order to choose the optimum pH (pH = 8) for determination. The root-mean-square errors of predictions for zinc, cadmium, and lead were 0.0466, 0.0282, and 0.050, respectively. The proposed method was successfully applied for the determination of zinc, cadmium, and lead in water samples.     

Determination of Pb(II), Zn(II), Cd(II), and Co(II) ions by flame atomic absorption spectrometry in food and water samples after preconcentration by coprecipitation with Mo(VI)-diethyldithiocarbamate

A new, simple, and rapid separation and preconcentration procedure, for determination of Pb(II), Cd(II), Zn(II), and Co(II) ions in environmental real samples, has been developed. The method is based on the combination of coprecipitation of analyte ions by the aid of the Mo(VI)–diethyldithiocarbamate–(Mo(VI)-DDTC) precipitate and flame atomic absorption spectrometric determinations. The effects of experimental conditions like pH of the aqueous solution, amounts of DDTC and Mo(VI), standing time, centrifugation rate and time, sample volume, etc. and also the influences of some foreign ions were investigated in detail on the quantitative recoveries of the analyte ions. The preconcentration factors were found to be 150 for Pb(II), Zn(II) and Co(II), and 200 for Cd(II) ions. The detection limits were in the range of 0.1–2.2 μg L^?1 while the relative standard deviations were found to be lower than 5 % for the studied analyte ions. The accuracy of the method was checked by spiked/recovery tests and the analysis of certified reference material (CRM TMDW-500 Drinking Water). The procedure was successfully applied to seawater and stream water as liquid samples and baby food and dried eggplant as solid samples in order to determine the levels of Pb(II), Cd(II), Zn(II), and Co(II) ions.     

The use of rapidly synergistic cloud point extraction for the separation and preconcentration of trace amounts of Ni (II) ions from food and water samples coupling with flame atomic absorption spectrometry determination

A novel improved preconcentration method known as rapidly synergistic cloud point extraction (RS-CPE) was established for nickel preconcentration and determination prior to its determination by flame atomic absorption spectrometry. In this work, the traditional CPE pattern was changed and greatly simplified in order to be applicable in metal extraction and detection. This method was accomplished in room temperature in 1 min. Non-ionic surfactant Triton X-114 was used as extractant. Octanol worked as cloud point revulsant and synergic reagent. The various parameters affecting the extraction and preconcentration of nickel such as sample pH, 2,2′-Furildioxime concentration, amounts of octanol, amounts of Triton X-114, type of diluting solvent, extraction time, and ionic strength were investigated and optimized. Under optimal conditions, the calibration curve showed an excellent linearity in the concentration range of 2–200 μg L^?1, and the limit of detection was 0.6 μg L^?1 for nickel. The developed method was successfully applied for the determination of nickel in food and water samples. The results showed that, the proposed method can be used as a cheap, rapid, and efficient method for the extraction and preconcentration of nickel from real samples.     

Monitoring of trace amounts of heavy metals in different food and water samples by flame atomic absorption spectrophotometer after preconcentration by amine-functionalized graphene nanosheet

We are introducing graphene oxide modified with amine groups as a new solid phase for extraction of heavy metal ions including cadmium(II), copper(II), nickel(II), zinc(II), and lead(II). Effects of pH value, flow rates, type, concentration, and volume of the eluent, breakthrough volume, and the effect of potentially interfering ions were studied. Under optimized conditions, the extraction efficiency is >97 %, the limit of detections are 0.03, 0.05, 0.2, 0.1, and 1 μg L^?1 for the ions of cadmium, copper, nickel, zinc, and lead, respectively, and the adsorption capacities for these ions are 178, 142, 110, 125, and 210 mg g^?1. The amino-functionalized graphene oxide was characterized by thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, and Fourier transform infrared spectrometry. The proposed method was successfully applied in the analysis of environmental water and food samples. Good spiked recoveries over the range of 95.8–100.0 % were obtained. This work not only proposes a useful method for sample preconcentration but also reveals the great potential of modified graphene as an excellent sorbent material in analytical processes.     

自动石墨消解-石墨炉原子吸收法测定土壤中铅和镉

本文建立了一种自动石墨消解仪消解土壤样品,石墨炉原子吸收法测定土壤中的铅、镉的方法。铅、镉元素在标准曲线范围内线性良好,相关系数均大于0.999,检测限分别为0.02、0.007 mg/kg,加标回收率在90.8%~104.0%,方法重复性RSD(n=7)低于3%。实验结果表明,该方法操作简单、准确度高、精密度好、检测限低,可用于大批量土壤中铅、镉的测定。     

Detection of Lead in Vegetables with New Chromogenic Reagent by Spectrophotometry

A new simple, rapid selective and highly sensitive chromogenic reagent dibromo-p-methyl-carboxyazo (DBMCA) was synthesized and studied in detail for the spectrophotometric detection of lead. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, Lead reacts with DBMCA to form a 1:2 blue complex having a sensitivity absorption peak at 646 nm. Under optimal conditions, Beer's Law is obeyed over the range from 0.09 to 0.8 microg mL(-1) Pb (II) and the apparent molar absorptivity is 1.03 x 10(5) mL(-1) cm(-1). The detection limit and the variation coefficient were found to be 2.12 microg mL(-1) and 1.0% respectively. It is found that, except for Ca (II) and Ba (II) all foreign ions studied do not interfere with detection. The interference caused by Ca (II) and Ba (II) can be easily eliminated by prior extraction with potassiumiodide-methylisobutylketone. The proposed method has been applied successfully for to the detection of Lead in vegetable leaves with good results.     

Assessing metal sorption on the marine alga Pilayella littoralis

Increasing interest in the development of biological materials for metal sorption led us to investigate the brown marine alga, Pilayella littoralis, as a biological sorbent. This work focuses on the harvest, preparation and evaluation of P. littoralis from Nahant beaches for use as a metal biosorbent. This biomass was used in batch tests with synthetic solutions. Its metal uptake properties, including metal binding capacity, the pH dependence of metal uptake and the kinetics of metal sorption, were investigated. Most metal sorption occurred within the first 5 min of exposure and the metals were optimally bound to the algae at pH 5.5. The algal binding capacities for Al(III), Cd(II), Co(II), Cr(VI), Cu(II), Fe(III), Ni(II) and Zn(II), were 2,000, 430, 560, 90, 850, 700, 390 and 450 micromol g(-1) of dried biomass, respectively. Metals were desorbed with 0.12 mol l(-1) HCl and determined by inductively coupled plasma atomic emission spectrometry (ICP-AES).     

浊点萃取分离富集荧光光度法测定水中α - 萘酚

基于非离子表面活性剂Triton X-114,采用浊点萃取分离富集荧光光度法测定水中α-萘酚,优化了影响浊点萃取的各种因素,包括样品酸度、表面活性剂体积分数、氢氧化钠溶液浓度、平衡温度和时间等,讨论了常见无机离子和可能共存的有机物的干扰。方法在0.010 mg/L～0.400 mg/L范围内线性良好,检出限为3.0μg/L,标准溶液测定的RSD为4.8%,水样加标回收率为94.3%～103%。     

Effects of dietary cadmium exposure on osmoregulation and urine concentration mechanisms of the semi-desert rodent Meriones shawi

Contamination by cadmium in the environment is of great concern because of its toxicity and threats to human and animal health. The current study was conducted to investigate the effects of a cadmium contaminated diet on the osmoregulation and urine concentration mechanisms of the semi-desert rodent Meriones shawi and eventual accumulation of this metal in vital organs such as the kidneys, which are directly implicated in water regulation. Originally, we used Differential Pulse Anodic Stripping Voltammetry (DPASV) to avoid the matrix interference due to the highly organic content in the biological samples. Our results show that Meriones shawi successfully maintained a homeostasis state and presented a special adaptation to regulate urine volume during cadmium exposure by decreasing diuresis and increasing urinary osmolality. The plasma osmolality and hematocrit remained constant throughout the experiment. The stripping signals of cadmium are linear up to 0.3-100 μg L(-1) range, with a detection limit of 0.28 μg L(-1). The DPASV technique was useful for easy, fast, selective and sensitive determination of Cd, which permits working at cellular concentration. This gives us more information about the chemical form in which Cd is introduced into the organ, as well as the intracellular Cd quantities. This study has potential importance if this valuable novel animal model, imitating human and animal environmental chronic exposure to Cd, could serve as an appropriate terrestrial biomonitor for Cd contaminated sites. These results are encouraging in the context of developing a low-cost and fast technology for the detection of pollutants and for studying the impairment caused by their effects.     

Solid phase extractive preconcentration of silver from aqueous samples

N,N-dibutyl-N1-benzoylthiourea (DBBT) impregnated onto a polymeric matrix, Amberlite XAD-16 was prepared. The separation and enrichment of Ag(I) from solution was investigated. Effective extraction conditions were optimized in column methods prior to determination by atomic absorption spectrometry. The optimum pH range for quantitative adsorption is 2-5. Quantitative recovery of Ag was achieved by stripping with 1 mol L(-1) thiourea in 1 mol L(-1) HCl. The sorption capacity of resin is 0.115 mmol Ag+ g(-1) resin. The relative standard deviation and detection limit was 3.1% for 1 microg Ag+ mL(-1) solution and 0.11 microg L(-1), respectively. The method was used for the determination of silver in geological water samples.     

An experimental design for the optimization of the extraction methods of metallic mobile fractions from environmental solid samples

The evaluation of the cadmium and lead mobile forms from environmental solid samples provides information about their mobility and bioavailability. In the present study, the Cd and Pb mobile fractions were obtained by two modified extraction methods applied to industrial and acidic pH soils or to polluted sediments. In order to highlight that the extraction procedure does not significantly influence the quantitative atomic absorption spectrometric determination of cadmium and lead, the robustness of the extraction methods was evaluated and proven applying a Youden and Steiner factorial design. Within this experimental design, the shaking rate, the shaking time, and the solid/liquid extraction ratio were modified. The measurement uncertainty of the whole analytical procedure was assessed, the contribution of the factors involved in the extraction process being insignificant compared to the other uncertainty sources. The importance of the study is related to the fact that it proves the applicability in the routine laboratory practice of the modified extraction methods by increasing the extraction ratio following thorough optimization and robustness studies.     

An online preconcentration system for the determination of uranium in water and effluent samples

Amberlite XAD-4 resin functionalized with β-nitroso-α-naphthol was applied to an online system for the preconcentration and determination of uranium. U (VI) ions were retained on the minicolumn at an appropriate pH and then desorbed with acid solution. The amount of uranium in the eluate was measured spectrophotometrically at 650 nm using Arsenazo III as a colorimetric reagent. The limit of detection and the preconcentration factor were 1.8 μg L^???1 and 10, respectively. The chemical and flow variables affecting the preconcentration were studied. The influence of several ions on the system was also investigated. The method was successfully applied for the evaluation of uranium in water and in effluent samples.     

Should foliar cadmium concentrations be expressed on a dry weight or dry ash weight basis?

Foliar analysis is a valuable tool for evaluating the pollution status of forests. However, the use of foliar diagnosis in large-scale surveys is a complicated process owing to the high variability within the crown. The method used to express foliar concentrations has often been found to diminish the variability. The effect of the method used to express element concentrations on the spatial variability of cadmium (Cd) in the leaves of crack willow (Salix fragilis L.) was investigated by sampling the leaves of one willow at 292 locations in the crown, each sampling location having a volume of 0.027 m3 (0.3 m x 0.3 m x 0.3 m). Cadmium showed a distinct spatial trend in the crown of the tree. Concentrations as low as 2.4 mg kg(-1) dry weight (DW) or 23.1 mg kg(-1) dry ash weight (DAW) were obtained in the top of the crown, and 10.6 mg kg(-1) DW or 73.0 mg kg(-1) DAW in the bottom of the crown. The lower relative standard deviation and weaker correlation with the sampling height support the use of DAW in large-scale surveys especially. The lower variability of the DAW Cd concentration makes this variable less sensitive to fluctuations caused by differences in growing conditions and sampling methodology. However, the majority of publications in this field report metal concentrations on a DW basis. Therefore, the restrictions set on the use of results expressed on a DAW basis in large-scale surveys of foliar metal concentrations have to be offset against the advantages offered by a reduction of the variability in metal concentrations.