Motorcycle crashes potentially preventable by three crash avoidance technologies on passenger vehicles

Objective: The objective of this study was to identify and quantify the motorcycle crash population that would be potential beneficiaries of 3 crash avoidance technologies recently available on passenger vehicles.

Methods: Two-vehicle crashes between a motorcycle and a passenger vehicle that occurred in the United States during 2011–2015 were classified by type, with consideration of the functionality of 3 classes of passenger vehicle crash avoidance technologies: frontal crash prevention, lane maintenance, and blind spot detection. Results were expressed as the percentage of crashes potentially preventable by each type of technology, based on all known types of 2-vehicle crashes and based on all crashes involving motorcycles.

Results: Frontal crash prevention had the largest potential to prevent 2-vehicle motorcycle crashes with passenger vehicles. The 3 technologies in sum had the potential to prevent 10% of fatal 2-vehicle crashes and 23% of police-reported crashes. However, because 2-vehicle crashes with a passenger vehicle represent fewer than half of all motorcycle crashes, these technologies represent a potential to avoid 4% of all fatal motorcycle crashes and 10% of all police-reported motorcycle crashes.

Discussion: Refining the ability of passenger vehicle crash avoidance systems to detect motorcycles represents an opportunity to improve motorcycle safety. Expanding the capabilities of these technologies represents an even greater opportunity. However, even fully realizing these opportunities can affect only a minority of motorcycle crashes and does not change the need for other motorcycle safety countermeasures such as helmets, universal helmet laws, and antilock braking systems.     

Behavioral influences on driver crash risks in Ghana: A qualitative study of commercial passenger drivers

Objectives: Though there is a growing body of literature on crash risks in the developed world, little is known about how well these models apply to motoring in developing countries, the context in which the majority of road traffic fatalities occur. This qualitative study explores factors perceived to influence crash risks for commercial drivers in Ghana.

Method: Twenty commercial drivers of varied ages and experience were sampled from 7 major lorry terminals in 3 regions (Greater Accra, Ashanti, and Volta) of Ghana. Data were collected through semistructured interviews.

Results: The participants identified some issues that are shared with drivers in the developed world, though moderated by the Ghanaian context. These included work pressures (e.g., fatigued driving), speeding, distracted driving, and inadequate vehicle maintenance. Other factors identified by participants are less frequently considered in research addressing driving behavior in developed countries. These included aggressive competition over passengers and corruption (e.g., improper licensing practices), among others.

Conclusion: The findings have implications for building a research base to support the development of road safety policy and interventions in developing countries.     

Pelvic restraint cushion sled test evaluation of pelvic forward motion

Objective: This study was designed to evaluate the performance of a pelvic restraint cushion (PRC), a submarining countermeasure that deploys under the thighs when a crash is detected in order to block the forward motion of the pelvis.

Methods: Sled tests approximating low- and high-speed frontal impacts were conducted with 4 female postmortem human subjects (PMHS) restrained by a lap and shoulder belt in the right front passenger seat. The subjects were tested with and without a PRC.

Results: The PRC is effective in reducing forward motion of the PMHS pelvis and reduces the risk of injury due to lap belt loading in a high-speed frontal crash.

Conclusions: Although small sample size limits the utility of the study's findings, the results suggest that the PRC can limit pelvic forward motion and that pelvic injury due to PRC deployment is not likely.     

A clustering approach to integrate traffic safety in road maintenance prioritization

Objectives: We combine data on roads and crash characteristics to identify patterns in road traffic crashes with regard to road characteristics. We illustrate how combined analysis of data regarding road maintenance, maintenance costs, road characteristics, crash characteristics, and geographical location can enrich road maintenance prioritization from a traffic safety perspective.

Methods: The study is based on traffic crash data merged with road maintenance data and annual average daily traffic (AADT) collected in Denmark. We analyzed 3,964 crashes that occurred from 2010 to 2015. A latent class clustering (LCC) technique was used to identify crash clusters with different road and crash characteristics. The distribution of crash severity and estimated road maintenance costs for each cluster was found and cluster differences were compared using the chi-square test. Finally, a map matching procedure was used to identify the geographical distribution of the crashes in each cluster.

Results: Results showed that based on road maintenance levels there was no difference in the distribution of crash severity. The LCC technique revealed 11 crash clusters. Five clusters were characterized by crashes on roads with a poor maintenance level (levels 4 and 3). Only a few of these crashes included a vulnerable road user (VRU) but many occurred on roads without barriers. Four clusters included a large share of crashes on acceptably maintained roads (level 2). For these clusters only small variations in road characteristics were found, whereas the differences in crash characteristics were more dominant. The last 2 clusters included crashes that mainly occurred on new roads with no need for maintenance (level 1). Injury severity, estimated maintenance costs, and geographical location were found to be differently distributed for most of the clusters.

Conclusions: We find that focusing solely on road maintenance and crash severity does not provide clear guidance of how to prioritize between road maintenance efforts from a traffic safety perspective. However, when combined with geographical location and crash characteristics, a more nuanced picture appears that allows consideration of different target groups and perspectives.     

A semi-automated tool for identifying agricultural roadway crashes in crash narratives

Objective: Crash reports contain precoded structured data fields and a crash narrative that can be a source of rich information not included in the structured data. The narrative can be useful for identifying vulnerable roadway users, such as agricultural workers. However, using the narratives often requires manual reviews that are time consuming and costly. The objective of this research was to develop a simple and relatively inexpensive, semi-automated tool for screening crash narratives and expediting the process of identifying crashes with specific characteristics, such as agricultural crashes.

Methods: Crash records for Louisiana from 2010 to 2015 were obtained from the Louisiana Department of Transportation (LaDOTD). Records with narratives were extracted and stratified by vehicle type. The majority of analyses focused on a vehicle type of farm equipment (Type T). Two keyword lists, an inclusion list and an exclusion list, were created based on the published literature, subject-matter experts, and findings from a pilot project. Next, a semi-automated tool was developed in Microsoft Excel to identify agricultural crashes. Lastly, the tool’s performance was assessed using a gold standard set of agricultural narratives identified through manual review.

Results: The tool reduced the search space (e.g., number of narratives that need manual review) for narratives requiring manual review from 6.7 to 59.4% depending on the research question. Sensitivity was high, with 96.1% of agricultural crash narratives being correctly classified. Of the gold standard agricultural narratives, 58.3% included an equipment keyword and 72.8% included a farm equipment brand.

Conclusion: This article provides information on how crash narratives can supplement structured crash data. It also provides an easy-to-implement method to facilitate incorporating narratives into safety research along with keyword lists for identifying agricultural crashes.     

Safe speed limits for a safe system: The relationship between speed limit and fatal crash rate for different crash types

Objective: The objective of this article is to provide empirical evidence for safe speed limits that will meet the objectives of the Safe System by examining the relationship between speed limit and injury severity for different crash types, using police-reported crash data.

Method: Police-reported crashes from 2 Australian jurisdictions were used to calculate a fatal crash rate by speed limit and crash type. Example safe speed limits were defined using threshold risk levels.

Results: A positive exponential relationship between speed limit and fatality rate was found. For an example fatality rate threshold of 1 in 100 crashes it was found that safe speed limits are 40 km/h for pedestrian crashes; 50 km/h for head-on crashes; 60 km/h for hit fixed object crashes; 80 km/h for right angle, right turn, and left road/rollover crashes; and 110 km/h or more for rear-end crashes.

Conclusions: The positive exponential relationship between speed limit and fatal crash rate is consistent with prior research into speed and crash risk. The results indicate that speed zones of 100 km/h or more only meet the objectives of the Safe System, with regard to fatal crashes, where all crash types except rear-end crashes are exceedingly rare, such as on a high standard restricted access highway with a safe roadside design.     

Modeling crash injury severity by road feature to improve safety

Objective: The objective of this research is 2-fold: to (a) model and identify critical road features (or locations) based on crash injury severity and compare it with crash frequency and (b) model and identify drivers who are more likely to contribute to crashes by road feature.

Method: Crash data from 2011 to 2013 were obtained from the Highway Safety Information System (HSIS) for the state of North Carolina. Twenty-three different road features were considered, analyzed, and compared with each other as well as no road feature. A multinomial logit (MNL) model was developed and odds ratios were estimated to investigate the effect of road features on crash injury severity.

Results: Among the many road features, underpass, end or beginning of a divided highway, and on-ramp terminal on crossroad are the top 3 critical road features. Intersection crashes are frequent but are not highly likely to result in severe injuries compared to critical road features. Roundabouts are least likely to result in both severe and moderate injuries. Female drivers are more likely to be involved in crashes at intersections (4-way and T) compared to male drivers. Adult drivers are more likely to be involved in crashes at underpasses. Older drivers are 1.6 times more likely to be involved in a crash at the end or beginning of a divided highway.

Conclusions: The findings from this research help to identify critical road features that need to be given priority. As an example, additional advanced warning signs and providing enlarged or highly retroreflective signs that grab the attention of older drivers may help in making locations such as end or beginning of a divided highway much safer. Educating drivers about the necessary skill sets required at critical road features in addition to engineering solutions may further help them adopt safe driving behaviors on the road.     

Fatally injured drivers in Norway 2005–2015—Trends in substance use and crash characteristics

Objective: Norway introduced a “Vision Zero” strategy in 2001, using multiple approaches, aiming toward a future in which no one will be killed or seriously injured in road traffic crashes (RTCs). Official statistics show that the number of fatally injured road users has declined substantially from 341 deaths in 2000 to 117 in 2015. In-depth crash investigations of all fatal RTCs started in Norway in 2005. The aim of this study was to investigate whether fatal crash characteristics, vehicle safety features, and prevalence of drugs and/or alcohol among fatally injured drivers and riders has changed during 2005–2015, accompanying the reduction in road fatalities.

Methods: Data on all car/van drivers and motorcycle/moped riders fatally injured in RTCs during 2005–2015 were extracted from Norwegian road traffic crash registries and combined with forensic toxicology data.

Results: The proportion of cars and motorcycles with antilock braking systems and cars with electronic stability control, increased significantly during the study period. The prevalence of nonuse of seat belts/helmets and speeding declined among both fatally injured drivers and riders. In addition, the prevalence of alcohol declined, though no significant change in the total prevalence of other substances was noted.

Conclusion: The observed changes toward more safety installations in cars and motorcycles and lower prevalence of driver-related risk factors like alcohol use, speeding, and nonuse of seat belts/helmets among fatally injured drivers/riders may have contributed to the decrease in road traffic deaths.     

A multinomial logit analysis of factors associated with severity of motorcycle crashes in Ghana

Objective: The objective of this study was to explore the factors affecting motorcycle crash severity in Ghana.

Methods: A retrospective analysis of motorcycle crash data between 2011 and 2015 was conducted using a motorcycle crash data set extracted from the National Road Traffic Crash Database at the Building and Road Research Institute (BRRI) in Ghana. Injury severity was classified into 4 categories: Fatal, hospitalized, injured, and damage only. A multinomial logit modeling framework was used to identify the possible determinants of motorcycle crash severity.

Results: During the study period, a total of 8,516 motorcycle crashes were recorded, of which 22.9% were classified as fatal, 42.1% were classified as hospitalized injuries, 29.4% were classified as slight injuries, and 5.6% were classified as damage-only crashes. The estimation results indicate that the following factors increase the probability of fatal injuries: At a junction; weekend; signage; poor road shoulder; village settlement; tarred and good road surface; and collision between motorcycle and heavy goods vehicle (HGV). Motorcycle crashes occurring during the daytime and on the weekend increases the probability of hospitalized injury. The results also suggest that motorcycle crashes occurring during the daytime, in curves or inclined portions of roads, or in unclear weather conditions decrease the probability of fatal injury.

Conclusions: This study provides further empirical evidence to support motorcycle crash modeling research, which is lacking in developing countries. The ability to understand the various factors that influence motorcycle crash severity is a step forward in providing an appropriate basis upon which informed motorcycle crash policies can be developed. Particular attention should be given to the provision of road signage at junctions and speed humps and controlling traffic during the weekend. In addition, road maintenance should be carried out periodically to address motorcycle safety in Ghana.     

Features of fatal injuries in older cyclists in vehicle–bicycle accidents in Japan

Objective: The purpose of this study was to identify and better understand the features of fatal injuries in cyclists aged 75 years and over involved in collisions with either hood- or van-type vehicles.

Methods: This study investigated the fatal injuries of cyclists aged 75 years old and over by analyzing accident data. We focused on the body regions to which the fatal injury occurred using vehicle–bicycle accident data from the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. Using data from 2009 to 2013, we examined the frequency of fatally injured body region by gender, age, and actual vehicle travel speed. We investigated any significant differences in distributions of fatal injuries by body region for cyclists aged 75 years and over using chi-square tests to compare with cyclists in other age groups. We also investigated the cause of fatal head injuries, such as impact with a road surface or vehicle.

Results: The results indicated that head injuries were the most common cause of fatalities among the study group. At low vehicle travel speeds for both hood- and van-type vehicles, fatalities were most likely to be the result of head impacts against the road surface.

The percentage of fatalities following hip injuries was significantly higher for cyclists aged 75 years and over than for those aged 65–74 or 13–59 in impacts with hood-type vehicles. It was also higher for women than men in the over-75 age group in impacts with these vehicles.

Conclusions: For cyclists aged 75 years and over, wearing a helmet may be helpful to prevent head injuries in vehicle-to-cyclist accidents. It may also be helpful to introduce some safety measures to prevent hip injuries, given the higher level of fatalities following hip injury among all cyclists aged 75 and over, particularly women.     

Wrong-way driving crashes: A multiple correspondence approach to identify contributing factors

Objective: Wrong-way driving (WWD) crashes result in 1.34 fatalities per fatal crash, whereas for other non-WWD fatal crashes this number drops to 1.10. As such, further in-depth investigation of WWD crashes is necessary. The objective of this study is 2-fold: to identify the characteristics that best describe WWD crashes and to verify the factors associated with WWD occurrence.

Methods: We collected and analyzed 15 years of crash data from the states of Illinois and Alabama. The final data set includes 398 WWD crashes. The rarity of WWD events and the consequently small sample size of the crash database significantly influence the application of conventional log-linear models in analyzing the data, because they use maximum-likelihood estimation. To overcome this issue, in this study, we employ multiple correspondence analysis (MCA) to define the structure of the crash data set and identify the significant contributing factors to WWD crashes on freeways.

Results: The results of the present study specify various factors that characterize and influence the probability of WWD crashes and can thus lead to the development of several safety countermeasures and recommendations. According to the obtained results, factors such as driver age, driver condition, roadway surface conditions, and lighting conditions were among the most significant contributors to WWD crashes.

Conclusions: Despite many other methods that identify only the contributing factors, this method can identify possible associations between various contributing factors. This is an inherent advantage of the MCA method, which can provide a major opportunity for state departments of transportation (DOTs) to select safety countermeasures that are associated with multiple safety benefits.     

Influence of pedestrian age and gender on spatial and temporal distribution of pedestrian crashes

Objectives: Every year, about 1.24 million people are killed in traffic crashes worldwide and more than 22% of these deaths are pedestrians. Therefore, pedestrian safety has become a significant traffic safety issue worldwide. In order to develop effective and targeted safety programs, the location- and time-specific influences on vehicle–pedestrian crashes must be assessed. The main purpose of this research is to explore the influence of pedestrian age and gender on the temporal and spatial distribution of vehicle–pedestrian crashes to identify the hotspots and hot times.

Methods: Data for all vehicle–pedestrian crashes on public roadways in the Melbourne metropolitan area from 2004 to 2013 are used in this research. Spatial autocorrelation is applied in examining the vehicle–pedestrian crashes in geographic information systems (GIS) to identify any dependency between time and location of these crashes. Spider plots and kernel density estimation (KDE) are then used to determine the temporal and spatial patterns of vehicle–pedestrian crashes for different age groups and genders.

Results: Temporal analysis shows that pedestrian age has a significant influence on the temporal distribution of vehicle–pedestrian crashes. Furthermore, men and women have different crash patterns. In addition, results of the spatial analysis shows that areas with high risk of vehicle–pedestrian crashes can vary during different times of the day for different age groups and genders. For example, for those between ages 18 and 65, most vehicle–pedestrian crashes occur in the central business district (CBD) during the day, but between 7:00 p.m. and 6:00 a.m., crashes among this age group occur mostly around hotels, clubs, and bars.

Conclusions: This research reveals that temporal and spatial distributions of vehicle–pedestrian crashes vary for different pedestrian age groups and genders. Therefore, specific safety measures should be in place during high crash times at different locations for different age groups and genders to increase the effectiveness of the countermeasures in preventing and reducing vehicle–pedestrian crashes.     

An evaluation scheme for assessing the effectiveness of intersection movement assist (IMA) on improving traffic safety

Objective: Intersection movement assist (IMA) has been recognized as one of the prominent countermeasures to reduce angle crashes at intersections, which constitute 22% of total crashes in the United States. Utilizing vehicle-based sensors, vehicle-to-vehicle (V2V), and vehicle-to-infrastructure (V2I) communications, IMA offers extended vision to provide early warning for an imminent crash. However, most of IMA-related research implements their methods and strategies only in simulations, test tracks, or driving simulator studies that have quite a few assumptions and limitations and hence the effectiveness evaluations reported may not be transferable or comparable.

Methods: This study seeks to develop a generalized evaluation scheme that can be used not only to assess the effectiveness of IMA on improving traffic safety at intersections but to facilitate comparisons across similar studies. The proposed evaluation scheme utilizes the concepts of traffic conflict in terms of time-to-collision (TTC) as a crash surrogate. This approach avoids the issue of having insufficient crash frequency data for system evaluation. To measure the effectiveness of IMA on reducing traffic conflicts, a relative risk is calculated for comparing the risk of with/without using the IMA. As a proof-of-concept study, this study applied the proposed evaluation scheme and reported the effectiveness of IMA on improving traffic safety in a field operation test (FOT). Seven test scenarios were conducted at 4 intersections, and a total of 40 participants were recruited to use the IMA for 6 months.

Results: It was estimated that IMA users have 26% fewer conflicts with TTC less than 5 s and have 15% fewer conflicts with TTC less than 4 s. However, the results vary across different sites and different definitions of conflicts in terms of TTC.

Conclusions: Overall, IMA is promising to effectively reduce angle crashes related to sight obstruction and has potential to reduce not only crash frequency but crash severity.     

Identifying the crash characteristics on freeway segments based on different ramp influence areas

Objective: This study aimed to explore the relationship between crash types and different freeway segments and identify the factors contributing to crashes on different freeway segments. Unlike most of the previous studies on freeway segments, this study separately investigates basic freeway segments, single ramp influence segments, and multiple ramp influence segments.

Methods: Nonlinear canonical correlation analysis (NLCCA) and proportionality test were used to identify the relationship between crash types and different freeway segments. The data sets for the different freeway segments accumulated for this study consist of 9,867 crash samples with complete information on all 22 chosen variables. A multinomial logit model (MNL) was used to estimate the influence of crash factors on different freeway segments.

Results: The results show that weaving and diverge overlap influence segments (WD) are more likely to have injury or fatal crashes; diverge and diverge overlap influence segments (DD) are more likely to have property damage–only (PDO) crashes; merge and merge overlap influence segments (MM) are more likely to have sideswipe crashes; and WD have non-sideswipe crashes; WD and weaving overlap influence segments (MW) are more likely to have rear end crashes; and MM segments are less likely to have hit object crashes. The contributing factors are identified by MNL and the results show that different traffic variables, environmental variables, vehicle variables, driver variables, and geometric variables significantly affected the likelihood of crashes on different freeway segments.

Conclusions: Investigation of crash types and factors contributing to crashes on different freeway segments is based on multiple ramp influence segments, which can promote a better understanding of the safety performance of various freeway segments.     

Rail height effects on safety performance of Midwest Guardrail System

Objective: Guardrail heights play a crucial role in the way that errant vehicles interact with roadside barriers. Low rail heights increase the propensity of vehicle rollover and override, whereas excessively tall rails promote underride. Further, rail mounting heights and post embedment depths may be altered by variations in roadside terrain. An increased guardrail height may be desirable to accommodate construction tolerances, soil erosion, frost heave, and future roadway overlays. This study aimed to investigate and identify a maximum safe installation height for the Midwest Guardrail System that would be robust and remain crashworthy before and after pavement overlays.

Methods: A research investigation was performed to evaluate the safety performance of increased mounting heights for the standard 787-mm (31-in.)-tall Midwest Guardrail System (MGS) through crash testing and computer simulation. Two full-scale crash tests with small passenger cars were performed on the MGS with top-rail mounting heights of 864 and 914 mm (34 and 36 in.). Test results were then used to calibrate computer simulation models.

Results: In the first test, a small car impacted the MGS with 864-mm (34-in.) rail height at 102 km/h (63.6 mph) and 25.0° and was successfully redirected. In the second test, another small car impacted the MGS with a 914-mm (36-in.) rail height at 103 km/h (64.1 mph) and 25.6° and was successful. Both system heights satisfied the Manual for Assessing Safety Hardware (MASH) Test Level 3 (TL-3) evaluation criteria. Test results were then used to calibrate computer simulation models. A mounting height of 36 in. was determined to be the maximum guardrail height that would safely contain and redirect small car vehicles. Simulations confirmed that taller guardrail heights (i.e., 37 in.) would likely result in small car underride. In addition, simulation results indicated that passenger vehicle models were successfully contained by the 34- and 36-in.-tall MGS installed on approach slopes as steep as 6:1.

Conclusions: A mounting height of 914 mm (36 in.) was determined to be the maximum guardrail height that would safely contain and redirect 1100C vehicles and not allow underride or excessive vehicle snag on support posts. Recommendations were also provided regarding the safety performance of the MGS with increased height.     

Cross-correlation between the controlled collision environment and real-world motor vehicle collisions: Evaluating the protection of the thoracic side airbag

Objective: Thoracic side airbags (tSABs) were integrated into the vehicle fleet to attenuate and distribute forces on the occupant's chest and abdomen, dissipate the impact energy, and move the occupant away from the intruding structure, all of which reduce the risk of injury. This research piece investigates and evaluates the safety performance of the airbag unit by cross-correlating data from a controlled collision environment with field data.

Method: We focus exclusively on vehicle–vehicle lateral impacts from the NHTSA's Vehicle Crash Test Database and NASS-CDS database, which are replicated in the controlled environment by the (crabbed) barrier impact. Similar collisions with and without seat-embedded tSABs are matched to each other and the injury risks are compared.

Results: Results indicated that dummy-based thoracic injury metrics were significantly lower with tSAB exposure (P <.001). Yet, when the controlled collision environment data were cross-correlated with NASS-CDS collisions, deployment of the tSAB indicated no association with thoracic injury (tho. MAIS 2+ unadjusted relative risk [RR] = 1.14; 90% confidence interval [CI], 0.80–1.62; tho. MAIS 3+ unadjusted RR = 1.12; 90% CI, 0.76–1.65).

Conclusion: The data from the controlled collision environment indicated an unequivocal benefit provided by the thoracic side airbag for the crash dummy; however, the real-world collisions demonstrate that no benefit is provided to the occupant. This has resulted from a noncorrelation between the crash test/dummy-based design taking the abstracting process too far to represent the real-world collision scenario.     

Motorcycle helmet visor–related facial injury and its potential mechanism of injury: Evidence-based case study

Objectives: We encountered an unusual facial laceration wound in relation to motorcycle helmet visor use during our clinical practice. We aimed to assess the prevalence of this unusual facial injury among motorcyclists who sustained facial injuries in selected hospitals and to determine the possible mechanism involved.

Methods: We used our prospective cross-sectional substudy involving injured motorcyclists presenting at major trauma hospitals in Southern Klang Valley, Malaysia, between March 2010 and March 2011. of 391 subjects with facial injuries, 2 male motorcyclists sustained this laceration. The wounds were assessed and we believed that each was associated with the helmet visor. One of the visors was collected and the edge was inspected using scanning electron microscopy (SEM).

Results: The prevalence of this unusual injury was 0.51% (95% confidence interval, 0.002–0.012) among motorcyclists who sustained facial injuries. Both cases were involved in a head-on collision with their colliding partners and their helmets were intact throughout the crash. The visor in case 1 was intact, but the visor in case 2 was broken. SEM analysis showed that the visor in case 1 had a potential cutting surface.

We postulated that with helmet rotation in the forward and downward position and with some degree of visor bending or with a dislodged visor, the sharp-edged visor could potentially severely lacerate the face.

Conclusion: This injury affects facial aesthetics and early referral to the facial surgery team is advocated. Documentation of the mechanism of injury, the patient’s helmet and visor is obligatory, so that this information can be delivered to the regional road safety authority for preventive measures.     

Motorcycle active safety systems: Assessment of the function and applicability using a population-based crash data set

Objective: Motorcycles and mopeds, often referred to as powered 2-wheelers (PTWs), play an important role in personal mobility worldwide. Despite their advantages, including low cost, space occupancy, and fuel efficiency, the risk of sustaining serious or fatal injuries is higher than that for occupants of passenger cars. The development of safety systems specific for PTWs represents a potential way to reduce casualties among riders. With the proliferation of new active and passive safety technologies, the question as to which might offer the most value is important. In this context, a prioritization process was applied to a set of PTW active safety systems to evaluate their applicability to crash scenarios alone and in combination. The systems included in the study were antilock braking (ABS), autonomous emergency braking (AEB), collision warning, curve warning, and curve assist.

Methods: With the functional performance of the 5 safety systems established, the relevance of each system to specific crash configurations and vehicle movements defined by a standardized accident classification system used in Victoria, Australia, was rated by 2 independent reviewers, with a third reviewer acting as a moderator where disagreements occurred. Ratings ranged from 1 (definitely not applicable) to 4 (definitely applicable). Using population-based crash data, the number and percentage of crashes that each safety system could potentially influence, or be relevant for, was defined. Applying accepted injury costs permitted the derivation of the societal economic cost of PTW crashes and the potential reductions associated with each safety system given a theoretical crash avoidance effectiveness of 100%.

Results: In the 12-year period 2000–2011, 23,955 PTW riders and 1292 pillion passengers were reported to have been involved in a road crash, with over 500 killed and more than 10,000 seriously injured; only 3.5% of riders/pillion passengers were uninjured. The total economic cost associated with these injured riders and pillion passengers was estimated to be AU$11.1 billion (US$7.70 billion; €6.67 billion). The 5 safety systems, as single solutions or in combination, were relevant to 57% of all crashes and to 74% of riders killed. Antilock braking was found to be relevant to the highest number of crashes, with incremental increases in coverage when combined with other safety systems.

Conclusions: The findings demonstrate that ABS, alone and in combination with other safety systems, has the potential to mitigate or possibly prevent a high percentage of PTW crashes in the considered setting. Other safety systems can influence different crash scenarios and are also recommended. Given the high cost of motorcycle crashes and the increasing number of PTW safety technologies, the proposed approach can be used to inform the process of selection of the most suitable interventions to improve PTW safety.     

Unintentional non-traffic injury and fatal events: Threats to children in and around vehicles

Objective: There have been substantial reductions in motor vehicle crash–related child fatalities due to advances in legislation, public safety campaigns, and engineering. Less is known about non-traffic injuries and fatalities to children in and around motor vehicles. The objective of this study was to describe the frequency of various non-traffic incidents, injuries, and fatalities to children using a unique surveillance system and database.

Methods: Instances of non-traffic injuries and fatalities in the United States to children 0–14 years were tracked from January 1990 to December 2014 using a compilation of sources including media reports, individual accounts from families of affected children, medical examiner reports, police reports, child death review teams, coroner reports, medical professionals, legal professionals, and other various modes of publication.

Results: Over the 25-year period, there were at least 11,759 events resulting in 3,396 deaths. The median age of the affected child was 3.7 years. The incident types included 3,115 children unattended in hot vehicles resulting in 729 deaths, 2,251 backovers resulting in 1,232 deaths, 1,439 frontovers resulting in 692 deaths, 777 vehicles knocked into motion resulting in 227 deaths, 415 underage drivers resulting in 203 deaths, 172 power window incidents resulting in 61 deaths, 134 falls resulting in 54 deaths, 79 fires resulting in 41 deaths, and 3,377 other incidents resulting in 157 deaths.

Conclusions: Non-traffic injuries and fatalities present an important threat to the safety and lives of very young children. Future efforts should consider complementary surveillance mechanisms to systematically and comprehensively capture all non-traffic incidents. Continued education, engineering modifications, advocacy, and legislation can help continue to prevent these incidents and must be incorporated in overall child vehicle safety initiatives.