报废电子器件处理技术进展

报废电子器件的数量急剧增长，加强其回收利用研究已经得到广泛重视。对报废电子器件的资源情况、回收技术，尤其是以环境保护-资源综合回收为目的的物理分离技术及其应用进行了评述，指出便于回收的电子器件的设计是未来发展的趋势。     

The accumulation of nonylphenol in a wastewater recycling process

A mathematical model was developed in this paper to describe the nonylphenol (NP) accumulation in the effluent of a wastewater recycling system. The model quantitatively presented the relationships among the NP concentrations in the raw wastewater and the system effluent, the number of wastewater recycling cycles, the water recycling ratio, the system NP removal efficiency, and the NP accumulation factor. The mathematical model was then verified through experimental modeling of a wastewater recycling process, and it was indicated that the Pearson correlation coefficient between mathematical simulation and experimental modeling results was 0.652. The study results indicated that the NP accumulation factor of a wastewater recycling system would approach a constant for large number of wastewater recycling cycles given the wastewater recycling ratio and system NP removal efficiency. The results also revealed that the NP concentration in the effluent increased with the wastewater recycling ratio given the system NP removal efficiency, and the increase of NP removal efficiency would decrease the NP accumulation in the system effluent under a given wastewater recycling ratio condition. The model was then applied to compute the maximum wastewater recycling ratio, predict reclaimed water quality and direct the design and management of sewage recycling systems in China.     

基于超临界技术的印刷线路板资源化方法研究

印刷线路板的回收由于其结构和组成材料的复杂性，被认为是电子电器产品回收中的重点和难点之一。提出了将超临界流体技术应用于废弃印刷线路板的回收工艺，研究出了一种环境友好的废弃印刷线路板回收方法。建立了回收模型及回收实验平台，并使用正交实验设计方法对实验进行设计，利用SPSS分析软件对实验数据进行了分析研究并结合实际实验结果得出了最佳工艺参数。通过对反应生成物进行质谱分析，推测出了生成物的主要组分，并据此对反应机理进行了研究。     

The major components of particles emitted during recycling of waste printed circuit boards in a typical e-waste workshop of South China

Electronic waste from across the world is dismantled and disposed of in China. The low-tech recycling methods have caused severe air pollution. Air particle samples from a typical workshop of South China engaged in recycling waste printed circuit boards have been analyzed with respect to chemical constituents. This is the first report on the chemical composition of particulate matter (PM) emitted in an e-waste recycling workshop of South China. The results show that the composition of PM from this recycling process was totally different from other emission sources. Organic matter comprised 46.7–51.6% of the PM. The major organic constituents were organophosphates consisting mainly of triphenyl phosphate (TPP) and its methyl substituted compounds, methyl esters of hexadecanoic and octadecanoic acids, levoglucosan and bisphenol A. TPP and bisphenol A were present at 1–5 orders of magnitude higher than in other indoor and outdoor environments throughout the world, which implies that they might be used as potential markers for e-waste recycling. The elemental carbon, inorganic elements and ions had a minor contribution to the PM (<5% each). The inorganic elements were dominated by phosphorus and followed by crustal elements and metal elements Pb, Zn, Sn, and lesser Cu, Sb, Mn, Ni, Ba and Cd. The recycling of printed circuit boards was demonstrated as an important contributor of heavy metal contamination, particularly Cd, Pb and Ni, to the local environment. These findings suggest that this recycling method represents a strong source of PM associated with pollutants to the ambient atmosphere of an e-waste recycling locale.     

废电子电器回收处理体系研究

分析了废电子电器回收处理体系的问题,提出了一种适合我国国情的废电子电器回收处理体系模式,并对国家对废电子电器回收处理体系的支持问题进行了讨论。     

Interactive analysis of waste recycling and energy recovery program in a small-scale incinerator

Conflicting goals affecting solid waste management are explored in this paper to find the best implementation of resource recovery with a small-scale waste-to-energy process. Recycling paper and plastic material often leaves a shortage of thermal energy to support incineration that forces operators to supplement the process with auxiliary fuels. Although there are considerable profits to be made from material recovery, the increase of fuel usage causes conflict given that it is cost prohibitive. A series of trials performed on a small-scale 1.5-t/day incineration plant with a cyclone heat recovery system found that material recycling can impede performance. Experimental results are expressed as empirical regression formulas with regard to combustion temperature, energy transfer, and heat recovery. Process optimization is possible if the waste moisture content remains <30%. To test the robustness of the optimization analysis, a series of sensitivity analyses clarify the extent of material recycling needed with regard to plastic, paper, and metal. The experiments also test whether the moisture in the waste would decrease when recycling paper because of its exceptional capacity to absorb moisture. Results show that recycling paper is strongly recommended when the moisture content is >20%, whereas plastic recycling is not necessary at that moisture condition. Notably, plastic recovery reduces the heat needed to vaporize the water content of the solid waste, thus it is recommended only when the moisture content is <10%. For above-normal incineration temperatures, plastic recycling is encouraged, because it removes excess energy. Metal is confirmed as an overall priority in material recycling regardless of the moisture content of the incoming waste.     

沉淀法回收聚苯乙烯泡沫塑料的工艺研究

研究沉淀法回收聚苯乙烯泡沫塑料(EPS)的工艺,利用石油裂解副产物为溶剂回收废旧聚苯乙烯泡沫塑料,以废治废,回收利用。溶剂低毒,对聚苯乙烯泡沫塑料溶解速度快,溶解量大,价廉易得。采用转式间歇投料并附加溶剂挥发分回收装置的工艺,溶剂回收率高,无二次污染,可循环使用。聚苯乙烯塑料(PS)回收率可达99%。     

沉淀法回收聚苯乙烯泡沫塑料的工艺研究

研究沉淀法回收聚苯乙烯泡沫塑料（EPS）的工艺，利用石油裂解副产物为溶剂回收废旧聚苯乙烯泡沫塑料，以废治废，回收利用。溶剂低毒，对聚苯乙烯泡沫塑料溶解速度快，溶解量大，价廉易得。采用转式间歇投料并附加溶剂挥发分z收装置的工艺，溶剂回收率高，无二次污染，可循环使用。聚苯乙烯塑料（PS）回收率可达99％。     

Management and performance of Taiwan's waste recycling fund

Taiwan's resource recycling program was formally established in 1989, starting with the mandatory recycling of polyethylene terephthalate bottles. The number of mandatory regulated materials was extended to 8 categories with 27 items by 2002. Because of false data reporting, financial scandal, lack of transparency of the system, and the demand from parliament, the recycling policy has gradually changed from entirely privatized to being nationalized. Currently, the structure is built on six main bodies: fund management committee, consumers, industries responsible, recyclers, fee reviewing committee, and auditing agents. The industries that are responsible submit a fee, which is set by the fee reviewing committee, to the waste recycling fund (WRF), which is operated by the fund management committee. The auditing agents routinely check the responsible industries by documentation review as well as on-site counting to ensure that the fee is correctly submitted. The WRF provides initiatives to collect and dispose of the end-of-life products. The fund is split into a trust fund and a nonbusiness fund to deal with the collection, disposal, and treatment of the listed materials. The latter deals with the supporting works and ensures that the system runs effectively. The ratio of trust fund to nonbusiness fund is 80-20%. It is no doubt that the current practice achieves some improvements. Household waste has been reduced by 22%. And, most importantly, the benefit-to-cost ratio was as high as 1.24. However, similar to other state-owned systems, the resource recycling program has been criticized for false reporting from the responsible industries, a rigid system, and complicated procedures. To build a sustainable enterprise, the recycling program should be privatized as the recycling market and operating procedures are well established and fully mature.     

Interactive Analysis of Waste Recycling and Energy Recovery Program in a Small-Scale Incinerator

Abstract

Conflicting goals affecting solid waste management are explored in this paper to find the best implementation of resource recovery with a small-scale waste-to-energy process. Recycling paper and plastic material often leaves a shortage of thermal energy to support incineration that forces operators to supplement the process with auxiliary fuels. Although there are considerable profits to be made from material recovery, the increase of fuel usage causes conflict given that it is cost prohibitive. A series of trials performed on a small-scale 1.5-t/day incineration plant with a cyclone heat recovery system found that material recycling can impede performance. Experimental results are expressed as empirical regression formulas with regard to combustion temperature, energy transfer, and heat recovery. Process optimization is possible if the waste moisture content remains <30%. To test the robustness of the optimization analysis, a series of sensitivity analyses clarify the extent of material recycling needed with regard to plastic, paper, and metal. The experiments also test whether the moisture in the waste would decrease when recycling paper because of its exceptional capacity to absorb moisture. Results show that recycling paper is strongly recommended when the moisture content is >20%, whereas plastic recycling is not necessary at that moisture condition. Notably, plastic recovery reduces the heat needed to vaporize the water content of the solid waste, thus it is recommended only when the moisture content is <10%. For above-normal incineration temperatures, plastic recycling is encouraged, because it removes excess energy. Metal is confirmed as an overall priority in material recycling regardless of the moisture content of the incoming waste.     

浙江省循环经济发展评价指标体系研究

近年来能源、土地及水资源短缺给浙江经济发展带来了极大的挑战,发展循环经济是实现可持续发展的重要途径.以循环经济为指导,结合浙江省循环经济发展现状,从减量化、资源化、无害化及社会经济发展四个控制层面构建浙江省循环经济发展指标体系,运用层次分析法对浙江省近8年的循环经济发展状况进行综合评价,旨在为浙江循环经济发展重点及方向提供科学依据.评价结果表明,浙江省循环经济发展水平逐年提高,呈良好发展趋势.     

Informal E-waste recycling in developing countries: review of metal(loid)s pollution,environmental impacts and transport pathways

Crude or primitive recycling practices are often adopted in material resource recovery from E-waste in developing nations. Significant human health and environmental impacts may occur because of such practices. Literature on metal(loid)s pollution during E-waste processing is fragmented. Here, I review the health and environmental impacts of E-waste recycling operations and transport pathways of metal(loid)s, dispersed during operations. This paper is organised into five sections. Section 1 relates to the background of global E-waste generation and legal/illegal trade, citing specific cases from Ghana and other developing nations. Section 2 provides a brief information on sources of metal(loid)s in E-waste. Section 3 describes characteristics of informal E-waste recycling operations in developing nations. Section 4 examines the health and environmental impacts in E-waste recycling while section 5 evaluates major transport pathways of metal(loid)s contaminants.     

废旧家用电器回收利用及处理处置技术

随着大量家用电器进入报废期,废旧家用电器的资源化回收利用成为一个新的环境问题。介绍了国内外废旧家电的回收利用状况、处理方法和工艺流程,重点介绍了废印刷线路板的处理工艺和废塑料的再生利用,并针对我国的实际问题提出了相应的措施和办法。     

Integrated bioleaching of copper metal from waste printed circuit board—a comprehensive review of approaches and challenges

Waste electrical and electronic equipment (e-waste) is the most rapidly growing waste stream in the world, and the majority of the residues are openly disposed of in developing countries. Waste printed circuit boards (WPCBs) make up the major portion of e-waste, and their informal recycling can cause environmental pollution and health risks. Furthermore, the conventional disposal and recycling techniques—mechanical treatments used to recover valuable metals, including copper—are not sustainable in the long term. Chemical leaching is rapid and efficient but causes secondary pollution. Bioleaching is a promising approach, eco-friendly and economically feasible, but it is slower process. This review considers the recycling potential of microbes and suggests an integrated bioleaching approach for Cu extraction and recovery from WPCBs. The proposed recycling system should be more effective, efficient and both technically and economically feasible.     

Analysis of flame retarded polymers and recycling materials

Recycling activities on polymeric materials are increasing and becoming more and more important in recent years. For polymers containing no flame retardants, suitable recycling strategies already exist. In order to investigate the recyclability of flame retarded polymers that contain brominated flame retardants, a number of samples were analysed as received from a recycling company. Following the identification and sorting of the samples according to type of polymers and flame retardants, material recycling was tested for the flame retarded polymers identified to occur most frequently. The reactivity of the flame retardants during the recycling procedure was studied by analysing for brominated dioxins and furans. The results demonstrate that flame retarded polymers can be recycled under certain experimental conditions.     

Management, disposal and recycling of waste industrial organic solvents in Hong Kong.

An attempt has been made to establish a mass balance of industrial organic solvents in Hong Kong. It is estimated that only a small portion, less than 4%, of all the organic solvents consumed in Hong Kong are collected as waste solvents and properly treated, while the remainder are used either in the formulation of solvent containing products, or are lost to the environment through vapour emissions, leaks and spills, or dumped illegally. It was found that solvent recycling has been a common practice in some industries but the existing level of solvent recycling in Hong Kong is difficult to estimate. About 87.4% of all the waste organic solvents disposed of at the licensed facilities are potentially recyclable although whether they can be recycled in practice depends on many factors. Examples of existing waste organic solvent management and recycling practices from selected industries in Hong Kong are presented. The economic feasibility of current and future potential recycling systems is evaluated for a few selected cases. An integrated waste organic solvent management strategy is proposed to minimize adverse impacts of organic solvents to the environment and human health.     

Levels and isomer profiles of Dechlorane Plus in the surface soils from e-waste recycling areas and industrial areas in South China

Dechlorane Plus (DP) is a highly chlorinated flame retardant. Levels of DP were measured in surface soils from e-waste recycling areas and industrial areas in South China. Higher DP levels were found in e-waste recycling areas (undetectable-47.4 ng/g) than those in industrial areas (0.0336-4.65 ng/g) in South China. The highest DP concentration (3327 ng/g) was found at the e-waste recycling site in Qingyuan, while DP levels fell dramatically with increasing distance away from the recycling site, suggesting that the e-waste recycling activities are an important source of DP emissions. The mean ratios of anti-DP to total DP (f_anti) for different sampling areas ranged from 0.58 to 0.76 and showed no significant difference from the ratio for the technical DP products (t-test, p > 0.05). Further intensive studies are needed to investigate the process of DP degradation and its degradation products.     

Chemical recycling of poly(ethylene terephthalate) (pet) by hydrolysis and glycolysis

In this paper we review an interesting method of PET recycling, i.e. chemical recycling; it is based on the concept of depolymerizing the condensation polymer through solvolytic chain cleavage into low molecular products which can be purified and reused as raw materials for the production of high-quality chemical products. In this work our attention is confined to the hydrolysis (neutral, acid and alkaline) and glycolysis processes of PET chemical recycling; operating conditions and mechanism of each method are reported and described. The neutral hydrolysis has an auto accelerating character; two kinetic models have been proposed: an half-order and a second order kinetic model. The acid hydrolysis could be explained by a modified shrinking core model under chemical reaction control and the alkaline hydrolysis by a first-order model with respect to hydroxide ion concentration. To describe glycolysis, two different kinetic models have been proposed where EG can act or not as internal catalyst. Further experimental and theoretical investigations are required to shed light on the promising processes of PET chemical recycling reviewed in this work.     

Characterisation of polymer fractions from waste electrical and electronic equipment (WEEE) and implications for waste management

There is an increasing interest in the end-of-life management of polymers present in waste electrical and electronic equipment (WEEE). This is mainly due to high recycling and recovery quotas set by the European WEEE directive, which can only be fulfilled by including the plastic fraction in recycling and recovery approaches. Previous studies identified a high material diversity and various contaminants in WEEE plastics, including heavy metals, polybrominated biphenyls (PBB), diphenyl ethers (PBDE), as well as polybrominated dibenzodioxins and dibenzofurans (PBDD/F). These substances are regulated by European directives that limit their levels in marketable products. Consequently, both material diversity and contaminants are strong arguments against material recycling and point to hazardous waste treatment. However, recent developments in the production of flame retardants and electrical and electronic goods aimed to reduce contaminants and material diversity. Thus, the present study summarises updated contaminant levels of plastic fractions of European WEEE, as well as data on materials in waste housing polymers. Material characterisation revealed housing fractions to be interesting sources for polymer recycling, which however has to implement potent material separation and/or bromine elimination techniques. With respect to contaminants, our data indicate an effective phase-out of PBB, but still high levels of PBDE and PBDD/F are found. Sources and implications for the material recycling and thermal recovery approaches are discussed in detail.     

废弃家电的环境危害及其黑色金属的再生资源化

废弃家电对环境的污染日趋严重，同时废弃家电中含有大量可再生利用的资源。论述了废弃家电中黑色金属再生利用的现状，分析了废弃家电的材料组成特点和再生黑色金属中夹杂元素的危害及其在冶炼中的行为，并提出应开展废弃家电中黑色金属再生利用技术的专门研究。