Effects of composting on phytotoxicity of spent pig-manure sawdust litter

The phytotoxicity of spent pig-manure sawdust litter (spent litter) was evaluated during further composting. Aqueous extracts of the spent litter were prepared by shaking the sample with water (1:10 w/v), and the toxicity of these extracts was determined on relative seed germination, relative root elongation and germination index (GI, a factor of relative seed germination and relative root elongation). The sensitivity of six plant species, namely Brassica parachinensis (Chinese cabbage), Brassica albogalera (Chinese kale), Allium sativum (onion), Cucumis sativus (cucumber), Amaranthus espinosus (Chinese spinach), and Lycopersicon esculentum (tomato) were compared. The effect of different moisture levels during composting on the phytotoxicity of the spent litter was also examined. Phytotoxicity of the spent litter was only evident during the earlier stage of composting (first 14 days) and, that seed germination and root elongation reached 100% (same as the control) towards the end of the composting. The concentrations of the major inhibitors, water-extractable Cu and Zn, and NH4(+)-N of the spent litter, declined during composting, indicating that these inhibitors were gradually eliminated as composting proceeded. Multiple regression analysis showed that the NH4(+)-N content of the spent litter was the most important chemical factor affecting phytotoxicity of the plant species selected for this study. Relative root elongation and GI were more sensitive indicators of phytotoxicity than seed germination. In the present study, the GI's of all plant species were >80% at day 60, indicating that the spent litter had reached its maturation by day 60. The responses of different plant species to the water-extracts of the spent litter were different. Among the six species, Chinese cabbage and Chinese spinach were the most sensitive species, and tomato and cucumber were the least sensitive species to indicate phytotoxicity of the spent litter. Moisture adjustment during the composting process did not affect the results of the phytotoxicity test.     

Feasibility of bioleaching integrated with a chemical oxidation process for improved leaching of valuable metals from refinery spent hydroprocessing catalyst

Bioleaching is considered an eco-friendly technique for leaching metals from spent hydroprocessing catalysts; however, the low bioleaching yield of some valuable metals (Mo and V) is a severe bottleneck to its successful implementation. The present study reported the potential of an integrated bioleaching-chemical oxidation process in improved leaching of valuable metals (Mo and V) from refinery spent hydroprocessing catalysts. The first stage bioleaching of a spent catalyst (coked/decoked) was conducted using sulfur-oxidizing microbes. The results suggested that after 72 h of bioleaching, 85.7% Ni, 86.9% V, and 72.1% Mo were leached out from the coked spent catalyst. Bioleaching yield in decoked spent catalyst was relatively lower (86.8% Ni, 79.8% V, and 59.8% Mo). The low bioleaching yield in the decoked spent catalyst was attributed to metals’ presence in stable fractions (residual + oxidizable). After first stage bioleaching, the integration of a second stage chemical oxidation process (1 M H₂O₂) drastically improved the leaching of Ni, Mo, and V (94.2–100%) from the coked spent catalyst. The improvement was attributed to the high redox potential (1.77 V) of the H₂O₂, which led to the transformation of low-valence metal sulfides into high-valence metallic ions more conducive to acidic bioleaching. In the decoked spent catalyst, the increment in the leaching yield after second stage chemical oxidation was marginal (<5%). The results suggested that the integrated bioleaching-chemical oxidation process is an effective method for the complete leaching of valuable metals from the coked spent catalyst.

     

Composting of spent pig litter at different seasonal temperatures in subtropical climate

To investigate the effects of seasonal temperatures on the composting of spent pig-manure sawdust litter (spent litter), two sets of experiments were carried out: one during winter, the other during summer. Physicochemical and microbial parameters including temperature, pH, inorganic N, humification indicators (HA and FA), heavy metals (Cu and Zn), total aerobic heterotrophs, ATP content and dehydrogenase activity were measured to understand changes in the spent litter during composting. Results demonstrated that the composting was faster during summer than winter. The spent litter during the summer trial reached maturity at day 56 whereas that of the winter trial was still immature at the end of composting (days 91). Microbial activities during the thermophilic stage of composting were much lower in the winter trial. Values began to increase during the latter part of composting, indicating that the spent litter in this winter trial was biologically unstable and must be further composted to reach full maturity. The changes in the microbial activities of the spent litter during summer or winter reflected the changes in their temperatures and chemical properties. The maturation of the spent litter during summer was accompanied by stabilization of the microbial and chemical properties and a drop in temperature to ambient level. Results of correlation analysis showed that temperature correlated not only with the microbial parameters but also with most of the chemical parameters. These parameters also correlated with each other. Among all the parameters measured, the trend of temperature changes is the simplest and most rapid parameter that can be used to evaluate the maturity of spent litter.     

Removal of hydrocarbons from wastewater using treated bark

This paper explores the possibility of removing hydrocarbons (HCs) and trace elements from synthetic and industrial effluents using treated bark as biosorbent. Coniferous bark was treated either chemically (Tc) or biologically (Tb) to eliminate soluble organic compounds of bark. The removal efficiency (RE) of the HCs from a synthetic oil-water mixture containing spent diesel motor oil exceeds 95% using 2 g/L of treated bark mixed with a synthetic oil-water mixture containing 2 g/L of spent oil. Under these conditions, the retention capacity (RC) was approximately 1 g HC/g dry substrate. The sorption reaction seems to be quasi-instantaneous, and the retention capacity of spent oil on treated bark increases as the temperature augments. This implies that the retention mechanism is related to the capillary action. Results of Fourier transform infrared (FTIR) spectroscopy indicate that spent oil is mainly composed of alkanes. They also suggest that no chemical bonds between Tc and spent oil were established. Measurement of the surface tension of spent oil and the wetting index of the bark suggests that only spent oil will be retained by the substrate. Treatment of an industrial effluent containing 14.4 g/L of total HCs was performed using Tc. It was possible to remove 97% of HCs and retain some trace elements such as Al, Ca, Fe, Mg, S, and so on.     

Composting of spent pig litter in turned and forced-aerated piles

A study was carried out to compare the compositing efficiency of spent litter (a mixture of partially decomposed pig manure and sawdust) in turned and forced-aerated piles. Duplicate piles were built with manual turning (every 4 days) during composting, and duplicate piles were set up with forced aeration using an air pump. The present study demonstrated that the efficiency of composting in the turned and forced-aerated piles was similar. Spent litter in these piles reached maturity at the same time (60 days). The forced-aerated piles went through similar physical, chemical, and microbial changes with the turned piles during composting. The forced-aerated composting system was also as effective as the turned system in eliminating Salmonella sp. in the spent litter. These results suggest that a forced-aerated composting system could be used as an alternative method in composting spent litter. The similarities in temporal changes in temperature, chemical, and microbiological properties of the forced-aerated piles, compared with the turned piles, indicate that addition of a bulking agent under forced aerated composting of spent litter is not necessary. The partially decomposed sawdust in the spent litter provided enough free air space, allowing the delivery of oxygen for the microorganisms in the spent litter piles.     

Removal of Hydrocarbons from Wastewater Using Treated Bark

ABSTRACT

This paper explores the possibility of removing hydrocarbons (HCs) and trace elements from synthetic and industrial effluents using treated bark as biosorbent. Coniferous bark was treated either chemically (Tc) or biologically (Tb) to eliminate soluble organic compounds of bark. The removal efficiency (RE) of the HCs from a synthetic oil-water mixture containing spent diesel motor oil exceeds 95% using 2 g/L of treated bark mixed with a synthetic oil-water mixture containing 2 g/L of spent oil. Under these conditions, the retention capacity (RC) was ~1 g HC/g dry substrate. The sorption reaction seems to be quasi-instantaneous, and the retention capacity of spent oil on treated bark increases as the temperature augments. This implies that the retention mechanism is related to the capillary action.

Results of Fourier transform infrared (FTIR) spectros-copy indicate that spent oil is mainly composed of al-kanes. They also suggest that no chemical bonds between

Tc and spent oil were established. Measurement of the surface tension of spent oil and the wetting index of the bark suggests that only spent oil will be retained by the substrate. Treatment of an industrial effluent containing 14.4 g/L of total HCs was performed using Tc. It was possible to remove 97% of HCs and retain some trace elements such as Al, Ca, Fe, Mg, S, and so on.     

Adsorptive removal of ascertained and suspected endocrine disruptors from aqueous solution using plant-derived materials

Environmental Science and Pollution Research - The present study deals with the use of low-cost plant-derived materials, namely a biochar, spent coffee grounds, spent tea leaves, and a compost...     

Effects of spent lubricating oil on the growth of Capsicum annum L. and Lycopersicon esculentum Miller

Susceptibility of the hot pepper (Capsicum annum L.) and the tomato (Lycopersicon esculentum Miller) to spent lubricating oil was investigated in soils supplemented with concentrations of oil ranging from 1-5% w/w. Treatment of soil with 4 and 5% spent oil consistently inhibited germination of both crops. Eighty-four days after sowing, the mean height and leaf area of C. annum in soil treated with 3% spent oil gave the lowest values. These were 3.14 +/- 0.6 cm and 0.24 +/- 0.01 cm(2) compared with respective values of 19.2 +/- 0.2 cm and 2.9 +/- 0.3 cm(2) for control plants. Premature death was observed in the case of L. esculentum plants treated with all tested strengths of spent lubricating oil.     

丝光废碱液净化处理工艺研究

为了循环利用牛仔布丝光加工工艺过程产生的废碱液,实验采用臭氧、双氧水以及二氧化锰为净化脱色剂对废碱液进行了脱色净化的研究,结果表明选用的3种脱色剂均有效果,以臭氧效果最佳。因此,重点探讨了臭氧的净化脱色工艺及条件,对于碱浓度为80 g/L的丝光废碱液,当臭氧曝气量为0.25 m3/h、接触反应时间为4 h时,脱色率可达到99.3%,经臭氧净化的废碱液能在牛仔布丝光工艺中循环使用。     

Hazardous Waste Minimization: Part IV Waste Reduction in the Metal Finishing Industry

The metal finishing industry uses over 40 production processes to produce a wide range of metal products. Waste streams generated include wastewater, waste oils, spent solvents, and spent process solutions. Currently a wide variety of techniques which minimize waste are available. Cost-effective methods to reduce electroplating wastewater contamination include water conservation and drag-out reduction, recovery and management. Ways to cost-effectively reduce the generation of spent metal-working fluids include establishing a fluid management program and installing a fluid recovery system. However, before any techniques are selected, a waste reduction survey should first be conducted.     

Performance evaluation of waste activated carbon on atrazine removal from contaminated water

In this study, the potential of spent activated carbon from water purifier (Aqua Guard, India) for the removal of atrazine (2 chloro-4 ethylamino-6-isopropylamino-1, 3, 5 triazine) from wastewaters was evaluated. Different grades of spent activated carbon were prepared by various pretreatments. Based on kinetic and equilibrium study results, spent activated carbon with a grain size of 0.3-0.5 mm and washed with distilled water (designated as WAC) was selected for fixed column studies. Batch adsorption equilibrium data followed both Freundlich and Langmuir isotherm. Fixed bed adsorption column with spent activated carbon as adsorbent was used as a polishing unit for the removal of atrazine from the effluent of an upflow anaerobic sludge blanket (UASB) reactor treating atrazine bearing domestic wastewater. Growth of bacteria on the surface of WAC was observed during column study and bacterial activity enhanced the effectiveness of adsorbent on atrazine removal from wastewater.     

Performance Evaluation of Waste Activated Carbon on Atrazine Removal from Contaminated Water

Abstract

In this study, the potential of spent activated carbon from water purifier (Aqua Guard, India) for the removal of atrazine (2 chloro-4 ethylamino-6-isopropylamino-1, 3, 5 triazine) from wastewaters was evaluated. Different grades of spent activated carbon were prepared by various pretreatments. Based on kinetic and equilibrium study results, spent activated carbon with a grain size of 0.3–0.5 mm and washed with distilled water (designated as WAC) was selected for fixed column studies. Batch adsorption equilibrium data followed both Freundlich and Langmuir isotherm. Fixed bed adsorption column with spent activated carbon as adsorbent was used as a polishing unit for the removal of atrazine from the effluent of an upflow anaerobic sludge blanket (UASB) reactor treating atrazine bearing domestic wastewater. Growth of bacteria on the surface of WAC was observed during column study and bacterial activity enhanced the effectiveness of adsorbent on atrazine removal from wastewater.     

碱性化学镀镍废液的净化处理

找到了一种处理碱性化学镀镍废液的新方法 ,研究了镀液组成、温度、时间、漂白粉浓度对化学镀镍废液处理结果的影响。结果表明 ,用漂白粉处理碱性化学镀镍废液是可行的。     

Characterization of spent nickel–metal hydride batteries and a preliminary economic evaluation of the recovery processes

Valuable metal materials can be recovered from spent nickel–metal hydride (NiMH) batteries. However, little attention has been paid to the metal compositions of individual components of NiMH batteries, although this is important for the selection of the appropriate recycling process. In this study, NiMH batteries were manually disassembled to identify the components and to characterize the metals in each of these. A preliminary economic analysis was also conducted to evaluate the recovery of valuable metals from spent NiMH batteries using thermal melting versus simple mechanical separation. The results of this study show that metallic components account for more than 60% of battery weight. The contents of Ni, Fe, Co, and rare earth elements (REEs) (i.e., valuable metals of interest for recovery) in a single battery were 17.9%, 15.4%, 4.41%, and 17.3%, respectively. Most of the Fe was in the battery components of the steel cathode collector, cathode cap, and anode metal grid, while Ni (>90%) and Co (>90%) were mainly in the electrode active materials (anode and cathode metal powders). About 1.88 g of REEs (Ce, La, and Y) could be obtained from one spent NiMH battery. The estimated profits from recovering valuable metals from spent NiMH batteries by using thermal melting and mechanical processes are 2,329 and 2,531 USD/ton, respectively, when including a subsidy of 1,710 USD/ton. The findings of this study are very useful for further research related to technical and economic evaluations of the recovery of valuable metals from spent NiMH batteries. Implications: The spent nickel–metal hydride (NiMH) batteries were manually disassembled and their components were identified. The metals account for more than 60% of battery weight, when Ni, Fe, Co, and rare earth elements (REEs) were 17.9%, 15.4%, 4.41%, and 17.3%, respectively, in a single battery. The estimated profits of recovering valuable metals from NiMH batteries by using thermal melting and mechanical processing are 2,329 and 2,531 USD/ton, respectively, when including a subsidy of 1,710 USD/ton. These findings are very useful to develop or select the recovery methods of valuable metals from spent NiMH batteries.     

Cadmium and lead bioavailability and their effects on polycyclic aromatic hydrocarbons biodegradation by spent mushroom substrate

Bioremediation of mixed metal–organic soil pollution constitutes a difficult task in different ecosystems all around the world. The aims of this work are to determine the capacity of two spent mushroom substrates (Agaricus bisporus and Pleurotus ostreatus) to immobilize Cd and Pb, to assess the effect of these metals on laccase activity, and to determine the potential of spent A. bisporus substrate to biodegrade four polycyclic aromatic hydrocarbons (PAH): fluorene, phenanthrene, anthracene, and pyrene, when those toxic heavy metals Cd and Pb are present. According to adsorption isotherms, spent P. ostreatus and A. bisporus substrates showed a high Pb and Cd adsorption capacity. Pb and Cd interactions with crude laccase enzyme extracts from spent P. ostreatus and A. bisporus substrates showed Cd and Pb enzyme inhibition; however, laccase activity of A. bisporus presented lower inhibition. Spent A. bisporus substrate polluted with PAH and Cd or Pb was able to biodegrade PAH, although both metals decrease the biodegradation rate. Spent A. bisporus substrate contained a microbiological consortium able to oxidize PAH with high ionization potential. Cd and Pb were immobilized during the bioremediation process by spent A. bisporus substrate. Consequently, spent A. bisporus substrate was adequate as a multi-polluted soil bioremediator.     

印制电路板酸性蚀刻废液的膜电解再生

高度精细化线路和高层数印制电路板产量的增加,导致酸性蚀刻废液的排放量越来越大,对环境的负荷也随之增大.介绍了酸性蚀刻废液膜电解再生的基本原理,进行了中试规模的应用研究,并与其他电解再生方法进行技术与经济比较分析.结果表明,在槽电压为5V、电解时间为2h的条件下,酸性蚀刻废液的氧化还原电位由480 mV升至540mV,所...     

废铅酸蓄电池铅膏性质分析

为给废旧铅蓄电池铅膏的湿法回收工艺提供理论依据,对湖北金洋冶金股份有限公司破碎分选后的废铅膏进行了XRF、XRD、物理分析及化学分析等,确定了废铅膏的主要成分、理化性质等特性。结果表明,废铅膏粒径细小,碾钵磨细后能过120目的筛下物超过77.4%,这对湿法转化是有利的。废铅膏主要组成为64.5%PbSO4、29.5%PbO2、4.5%PbO、0.8%Pb及其他微量杂质元素,杂质主要包括Fe、Sb和Si等。因此,铅膏湿法处理时应该采取合适的净化工艺。     

Effects of bacterial inoculum and moisture adjustment on composting of pig manure

Spent litter (a mixture of partially composted pig manure and sawdust) was taken from pig pens employing the pig-on-litter system with and without the addition of a commercial bacterial product (Odor control (OC)-organic fertilizers (OF)). A duplicate series of windrows was set up with spent litter which contained the bacterial product and a further duplicate series was set up with spent litter which did not contain the bacterial product. All four sets had their initial moisture content adjusted to 60% but one of each duplicate pair had its moisture content adjusted to 60% during the entire period of further composting in windrows. The rate of further (windrow) composting was significantly different in the litter which contained no bacterial product and which only had its moisture content adjusted at the beginning of the experiment. Decomposition was incomplete in this set even after day 91. In the three other sets, the rate of decomposition was faster and the spent litter became stabilised by day 56. This result suggests that if the bacterial product has been added during the initial pig-on-litter composting process, moisture adjustment during further (windrow) composting is not important. Conversely, if moisture was adjusted during further composting, the addition of bacterial product during initial pig-on-litter composting would be of no value. Such a finding is of remarkable significance in the further composting of spent litter since this indicates that the process could be run on a much more economical basis.     

Mineralization of dinitrotoluenes and trinitrotoluene of spent acid in toluene nitration process by Fenton oxidation

Fenton's reagent, UV/H2O2 and UV/Fenton's reagent were employed to mineralize dinitrotoluene (DNT) isomers and 2,4,6-trinitrotoluene (TNT) of spent acid in toluene nitration process. The bench-scale experiments were conducted to elucidate the influence of various operating variables on the performance of removal of total organic compounds (TOC) from spent acid, including reaction temperature, concentration of ferrous ion and H2O2 dosage. It is remarkable that organic compounds were completely mineralized by Fenton oxidation, of which removal efficiency is superior to that of UV/H2O2. Nevertheless, it makes slight difference between Fenton oxidation and UV/Fenton oxidation. According to the spectra identified by gas chromatograph/mass spectrometer (GC/MS), it is proposed that oxidative degradation of DNT isomers leads to o-, m-, p-mononitrotoluene (MNT) and 1,3-dinitrobenzene respectively. Besides, the oxidation of 2,4,6-TNT gives the 1,3,5-trinitrobenzene intermediate. Apparently, Fenton oxidation is promising for purification of spent acid industrially.