Differences in microbial biomass,organic carbon,and dye sorption between flow and no-flow regions of unsaturated soil

Transport models in which the liquid phase is partitioned between conducting and nonconducting regions allow the possibility that degradation and sorption are different in these regions. However, there is little information on biological or chemical differences between conducting and nonconducting regions of the soil matrix. Previous work by the authors on Br transport through unsaturated, intact soil cores of Dundee silty clay loam (fine-silty, mixed, active, thermic Typic Endoaqualf) indicated non-equilibrium conditions that could be well-described by a two-region model. Fitted parameters indicated little solute transfer between flow regions, suggesting that dye movement in unsaturated soil might delineate conducting and nonconducting regions of this soil. Steady-state, unsaturated flow was established in intact cores (10 by 30 cm) of the Dundee soil, then Br and erioglaucine dye were displaced through these cores. The soil cores were then sectioned into 5-cm segments and stained soil was separated from unstained soil. Microbial biomass C, organic C, and dye sorption K(D) (= g(sorbed) kg(-1)soil/g L(-1)) values for stained and unstained soil were determined. Stained soil had higher microbial biomass C but generally lower organic C and lower affinity for dye sorption than unstained soil from the same depth increment. Fraction of immobile water, dispersion, and mass transfer between conducting and nonconducting regions were consistent with previous results.     

Aging effects on the sorption-desorption characteristics of anthropogenic organic compounds in soil

Field studies have demonstrated that prolonged pesticide-soil contact times (aging) may lead to unexpected persistence of these compounds in the environment. Although this phenomenon is well documented in the field, there have been very few controlled laboratory studies that have tested the effects of long-term aging and the role of differing sorbates on contaminant sorption-desorption behavior and fate in soils. This study examines the sorption-desorption behavior of chlorobenzene, ethylene dibromide (1,2-dibromomethane), atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine), and 2, 4-D (2,4-dichlorophenoxyacetic acid) on one soil type after 1 d, 30 d, and 14 mo of aging. Sorption isotherms were evaluated after each aging period to observe changes in the uptake of each compound by soil. Desorption kinetic data were generated after each aging period to observe changes in release from soil, and desorption parameters were evaluated using a three-site desorption model that includes equilibrium, nonequilibrium, and nondesorption sites. The data indicate no statistically significant increase in sorption for ethylene dibromide or chlorobenzene from 1 to 30 d, although sorption of 2,4-D increased slightly, and sorption of atrazine decreased slightly. Statistically significant increases in linear sorption coefficients (Kd), from 1 d to 14 mo of aging, were apparent for ethylene dibromide and 2,4-D. The Kd values for chlorobenzene, measured after 1 d, 30 d, and 14 mo of aging, were statistically indistinguishable. Aging affected the distribution of chemicals within sorption sites. With aging, the desorbable fraction decreased and the nondesorbable fraction, which was apparent after only 1 d of pesticide-soil contact, increased for all chemicals studied.     

Sorption kinetics and equilibria of organic pesticides in carbonatic soils from South Florida

A batch reactor was used to determine sorption kinetic parameters (k2, F, and K*) and the equilibrium sorption coefficient (K). The two-site nonequilibrium (TSNE) batch sorption kinetics model was used to calculate the kinetic parameters. Two probe organic pesticides, atrazine [2-chloro-4-ethylamino-6-isopropylamino-s-triazine] and diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] were studied using three carbonatic soils from South Florida (Chekika, Perrine, and Krome), one noncarbonatic soil from Iowa (Webster), and one organic soil (Lauderhill) from South Florida. Carbonatic soils contained more than 600 g kg(-1) CaCO3. Sorption is initially very fast up to 3 h and then slowly reaches equilibrium. All soil-chemical combinations reached sorption equilibrium after about 24 h and all sorption isotherms were linear. The sorption kinetics data were well described by the TSNE model for all soil-chemical combinations except for the marl soil data (Perrine-Atrazine), which were better described by the one-site nonequilibrium (OSNE) model. Diuron, with higher K, undergoes slower sorption kinetics than atrazine. The Lauderhill soil containing organic carbon (OC) of 450 g kg(-1) exhibited slowest sorption kinetics for both pesticides. An inverse relationship between k3 and K was observed for atrazine and diuron separately in Chekika, Webster, and Lauderhill soils but not in Perrine and Krome soils. The sorption kinetic parameters were used to distinguish the sorption behavior between atrazine and diuron and to identify differences between soils. Normalizing the sorption coefficient (K) to OC showed that atrazine and diuron had K oc values in carbonatic soils that were a third of reported literature values for noncarbonatic soils. Using existing literature K oc values in solute transport models will most likely underestimate the mobility of atrazine, diuron, and other neutral organic chemicals in carbonatic soils.     

Cadmium leaching from micro-lysimeters planted with the hyperaccumulator Thlaspi caerulescens: experimental findings and modeling

The use of heavy metal hyperaccumulating plants has the potential to become a promising new technique to remediate contaminated sites. We investigated the role of metal mobilization in the Cd hyperaccumulation of Thlaspi caerulescens (J. & C. Presl, 'Ganges'). In a micro-lysimeter experiment we investigated the dynamics of Cd concentration of leachate as well as Cd removal by plant uptake in four treatments: (i) Control (bare soil), (ii) T. caerulescens, (iii) nonhyperaccumulator Brassica juncea (L.) Czern. ('PI 426308'), and (iv) co-cropping of the hyperaccumulator and nonhyperaccumulator. The experimental findings were analyzed using one- and two-site rate-limited desorption models. Co-cropping of T. caerulescens and B. juncea did not enhance metal uptake by B. juncea. Although Cd uptake of T. caerulescens was 10 times higher than that of B. juncea, the Cd concentration of leachate of the T. caerulescens treatment did not decrease below that of the B. juncea treatment. The Cd depletion in leachate was well reproduced by the two-site rate-limited desorption model. The optimized desorption coefficient was three orders of magnitude higher in the rhizosphere than in the bulk soil. Our results indicate that T. caerulescens accelerates the resupply of Cd from soil pointing to an important role of kinetic desorption in the hyperaccumulation by T. caerulescens.     

Phosphorus leaching in relation to soil type and soil phosphorus content

Phosphorus losses from arable soils contribute to eutrophication of freshwater systems. In addition to losses through surface runoff, leaching has lately gained increased attention as an important P transport pathway. Increased P levels in arable soils have highlighted the necessity of establishing a relationship between actual P leaching and soil P levels. In this study, we measured leaching of total phosphorus (TP) and dissolved reactive phosphorus (DRP) during three years in undisturbed soil columns of five soils. The soils were collected at sites, established between 1957 and 1966, included in a long-term Swedish fertility experiment with four P fertilization levels at each site. Total P losses varied between 0.03 and 1.09 kg ha(-1) yr(-1), but no general correlation could be found between P concentrations and soil test P (Olsen P and phosphorus content in ammonium lactate extract [P-AL]) or P sorption indices (single-point phosphorus sorption index [PSI] and P sorption saturation) of the topsoil. Instead, water transport mechanism through the soil and subsoil properties seemed to be more important for P leaching than soil test P value in the topsoil. In one soil, where preferential flow was the dominant water transport pathway, water and P bypassed the high sorption capacity of the subsoil, resulting in high losses. On the other hand, P leaching from some soils was low in spite of high P applications due to high P sorption capacity in the subsoil. Therefore, site-specific factors may serve as indicators for P leaching losses, but a single, general indicator for all soil types was not found in this study.     

Effect of soil properties on saturated and unsaturated virus transport through columns

Viruses from contaminant sources can be transported through porous media to drinking water wells. The objective of this study was to investigate inactivation and sorption of viruses during saturated and unsaturated transport in different soils. Bacteriophages phiX174 and MS-2, and Br- tracer in a phosphate-buffered saline solution were introduced into saturated and unsaturated soil columns as a step function under constant flow rate and hydraulic conditions. Results showed that significantly greater virus removal occurred in the unsaturated columns than in the saturated columns in the two soils containing high metal oxides content. However, the increase in virus retention under unsaturated conditions was not significant in two other soils having high phosphorus and calcium contents and high pH, and in another soil with high organic matter content. The results imply that the extent of water content effect on inactivation and sorption of viruses can range from significant to minimal depending on the properties of the transport medium. We found that the presence of in situ metal oxides was a significant factor responsible for virus sorption and inactivation. Therefore, soils with high metal oxides content may have the potential to be used as hydrological barriers in preventing microbial contamination in the subsurface environments. We also found that the water content effect on virus removal and inactivation strongly depended on solid properties of the testing medium.     

CHEMICAL REACTIONS SIMULATED BY GROUND-WATER-QUALITY MODELS1

ABSTRACT: Recent literature concerning the modeling of chemical reactions during transport in ground water is examined with emphasis on sorption reactions. The theory of transport and reactions in porous media has been well documented. Numerous equations have been developed from this theory, to provide both continuous and sequential or multistep models, with the water phase considered for both mobile and immobile phases. Chemical reactions can be either equilibrium or non-equilibrium, and can be quantified in linear or non-linear mathematical forms. Non-equilibrium reactions can be separated into kinetic and diffusional rate-limiting mechanisms. Solutions to the equations are available by either analytical expressions or numerical techniques. Saturated and unsaturated batch, column, and field studies are discussed with one-dimensional, laboratory-column experiments predominating. A summary t able is presented that references the various kinds of models studied and their applications in predicting chemical concentrations in ground waters.     

Cadmium solubility and sorption in a long-term sludge-amended arable soil

Cadmium solubility and sorption in an arable clay loam soil that had received sewage sludge for 41 years were compared to an unsludged control in batch studies. Soil pH dominated Cd sorption, explaining >92% of the variation in Kd values in both treatments. At any pH, Cd sorption was apparently slightly but significantly (p < 0.05) smaller in the sludge-amended soil compared to the control, even though the organic carbon content was 70% larger and the ammonium oxalate-extractable iron content was roughly doubled. Correction for dissolved organic carbon (DOC) complexation with the speciation model WHAM reduced the difference in sorption between treatments, but the sludged soil still had significantly smaller Kd values (p < 0.01). Batch equilibrations without addition of Cd showed that there was no significant difference in the solubility of "native" cadmium (defined as EDTA-extractable Cd) in sludged and control soils. The reason for the lack of increase in Cd sorption in the sludge-amended soil has not been established, but it may be due to competition for sorption sites on humic compounds with sludge-derived Fe and trace metals such as zinc. The fact that the pyrophosphate-extractable (i.e., organically associated) iron content was seven times larger in the sludged soil provides some supporting evidence for this hypothesis.     

A comparative study for the sorption of Cd(II) by K-feldspar and sepiolite as soil components, and the recovery of Cd(II) using rhamnolipid biosurfactant

This study investigated the sorption characteristics and recovery of selected heavy metal Cd(II) from K-feldspar and sepiolite, representative soil components, using rhamnolipid biosurfactant. Although the proposed technique was classified as a soil bioremediation process, it can also be applied to treatment of waste waters containing Cd(II) ions with minor modifications. The effect of initial Cd(II) concentration on sorption capacity was characterized by determining the sorption isotherms. Of the four models examined, the Freundlich model showed the best fit for the sorption of Cd(II) on K-feldspar, whereas the Langmuir-model was used successfully to characterize the sorption of Cd(II) on sepiolite. Although a high Cd(II) uptake of 7.49 mmol/kg by K-feldspar was obtained, sepiolite was a superior Cd(II) accumulater, with a maximum Cd(II) uptake of 24.66 mmol Cd(II)/kg. The presence of Cd(II) in the sepiolite or K-feldspar prior to addition of the rhamnolipid generally resulted in less rhamnolipid sorption to sepiolite or K-feldspar. The maximum Cd(II) desorption efficiency by rhamnolipid from K-feldspar was substantially higher than that of sepiolite and determined to be 96% of the sorbed Cd(II), whereas only 10.1% of the sorbed Cd(II) from sepiolite was recovered by rhamnolipid solution.     

Sorption of trace metals by standard and micro suction cups in the absence and presence of dissolved organic carbon

Both the bioavailability of a trace metal (TM) in a soil and the risk of leaching to the ground water are linked to the metals concentration in the soil solution. Sampling soil solution by tension lysimetry with suction cups is a simple and established technique that is increasingly used for monitoring dissolved TM in soils. Of major concern, however, is the sorption of TM by the walls of the samplers. Metal sorption by different materials used in suction cups can vary widely, depending also on the chemistry of the soil solution. We compared the sorption of Cu, Zn, Cd, and Pb by different standard-size and micro suction cups in the laboratory at two pH values (4.5 and 7.5 or 8.0) in absence and presence of dissolved organic carbon (DOC). In addition, we investigated the sorption of DOC from different origins by the cup materials. At both pH values, the weakest sorption of all four TMs was exhibited by standard-size suction cups based on nylon membranes and by hollow fibers made from polyvinyl alcohol (PVA). At alkaline pH, borosilicate glass, ceramic materials, and polytetrafluorethylene (PTFE) mixed with silicate were characterized by generally strong sorption of all investigated TMs. In addition, Cu and Pb were strongly sorbed at low pH by PTFE-silicate and a ceramic material used for the construction of standard-size suction cups. On the other hand, sorption of Cu, Zn, and Cd by ceramic capillaries produced from pure aluminum oxide was negligible at low pH. Micro suction cups made of an unknown polymerous tube sorbed Cu strongly, but were well suited to monitor Zn, Cd, and Pb at low pH, and, in the presence of DOC, also at high pH. Major cations (Na+, Mg2+, K+, Ca2+) and anions (Cl-, NO3-, SO4(2-)) were not or very weakly sorbed by all cup materials, except for Mg2+, K+, and Ca2+ by borosilicate glass at pH 7.5. Trace metal sorption by suction cups was generally greatly reduced in the presence of DOC, especially at alkaline pH. The sorption of DOC itself depended on its source. Dissolved organic carbon from leaf litter extracts with a probably large hydrophobic fraction was sorbed more strongly than mainly hydrophilic DOC from a mineral soil solution.     

Sorption and desorption of cadmium by different fractions of biosolids-amended soils

To evaluate the importance of both the inorganic and organic fractions in biosolids on Cd chemistry, a series of Cd sorption and desorption batch experiments (at pH 5.5) were conducted on different fractions of soils from a long-term field experimental site. The slope of the Cd sorption isotherm increased with rate of biosolids and was different for the different biosolids. Removal of organic carbon (OC) reduced the slope of the Cd sorption isotherm but did not account for the observed differences between biosolids-amended soils and a control soil, indicating that the increased adsorption associated with biosolids application was not limited to the increased OC from the addition of biosolids. Removal of both OC and Fe/Mn further reduced the slopes of Cd sorption isotherms and the sorption isotherm of the biosolids-amended soil was the same as that of the control, indicating both OC and Fe/Mn fractions added by the biosolids were important to the increased sorption observed for the biosolids-amended soil samples. Desorption experiments failed to remove from 60 to 90% of the sorbed Cd. This "apparent hysteresis" was higher for biosolids-amended soil than the control soil. Removal of both OC and Fe/Mn fractions was more effective in removing the observed differences between the biosolids-amended soil and the control than either alone. Results show that Cd added to biosolids-amended soil behaves differently than Cd added to soils without biosolids and support the hypothesis that the addition of Fe and Mn in the biosolids increased the retention of Cd in biosolids-amended soils.     

Sorption and fractionation of dissolved organic matter and associated phosphorus in agricultural soil

Mobility of dissolved organic matter (DOM) strongly affects the export of nitrogen (N) and phosphorus (P) from soils to surface waters. To study the sorption and mobility of dissolved organic C and P (DOC, DOP) in soil, the pH-dependent sorption of DOM to samples from Ap, EB, and Bt horizons from a Danish agricultural Humic Hapludult was investigated and a kinetic model applicable in field-scale models tested. Sorption experiments of 1 to 72 h duration were conducted at two pH levels (pH 5.0 and 7.0) and six initial DOC concentrations (0-4.7 mmol L(-1)). Most sorption/desorption occurred during the first few hours. Dissolved organic carbon and DOP sorption decreased strongly with increased pH and desorption dominated at pH 7, especially for DOC. Due to fractionation during DOM sorption/desorption at DOC concentrations up to 2 mmol L(-1), the solution fraction of DOM was enriched in P indicating preferred leaching of DOP. The kinetics of sorption was expressed as a function of how far the solution DOC or DOP concentrations deviate from "equilibrium." The model was able to simulate the kinetics of DOC and DOP sorption/desorption at all concentrations investigated and at both pH levels making it useful for incorporation in field-scale models for quantifying DOC and DOP dynamics.     

Tool for assessment of process importance at the groundwater/surface water interface

The groundwater/surface water interface (GWSWI) represents an important transition zone between groundwater and surface water environments that potentially changes the nature and flux of contaminants exchanged between the two systems. Identifying dominant and rate-limiting contaminant transformation processes is critically important for estimating contaminant fluxes and compositional changes across the GWSWI. A new, user-friendly, spreadsheet- and Visual Basic-based analytical screening tool that assists in evaluating the dominance of controlling kinetic processes across the GWSWI is presented. Based on contaminant properties, first-order processes that may play a significant role in solute transport/transformation are evaluated in terms of a ratio of process importance (P_i) that relates the process rate to the rate of fluid transfer. Besides possessing several useful compilations of contaminant and process data, the screening tool also includes 1-D analytical models that assist users in evaluating contaminant transport across the GWSWI. The tool currently applies to 29 organics and 10 inorganics of interest within the context of the GWSWI. Application of the new screening tool is demonstrated through an evaluation of natural attenuation at a site with trichloroethylene and 1,1,2,2-tetrachloroethane contaminated groundwater discharging into wetlands.     

A model for linking the effects of parathion in soil to its degradation and bioavailability kinetics

Parathion is an insecticide of a group of highly toxic organophosphorus compounds. To investigate the dissipation and toxicological impact of parathion [O,O-diethyl O-(4-nitrophenyl) phosphorothioate] and its highly toxic metabolite, paraoxon, soil laboratory experiments were conducted in columns during a 19-d experiment under variably saturated conditions. Water and pesticide transport, sorption, and biodegradation of parathion were measured in three soil pools (soluble phase, weakly and strongly sorbed phases) using C-labeled pesticide. The effects of parathion and its metabolite on the mobility of soil nematodes were observed and then modeled with an effective variable, which combined pesticide concentration and time of application. Results showed that parathion was highly sorbed and slowly degraded to a mixture of metabolites. The parent compound and its metabolites remained located in the top 0.06-m soil layer. A kinetic model describing the sorption, biodegradation, and allocation into different soil pools of parathion and its metabolites was coupled with heat and water transport equations to predict the fate of parathion in soil. Simulated results were in agreement with experimental data, showing that the products remained in the upper soil layers even in the case of long-term (11-mo) simulation. The strongly sorbed fraction may be regarded as a pesticide reservoir that regularly provides pesticide to the weakly sorbed phase, and then, liquid phase, respectively. From both modeling and observations, no major toxicological damage of parathion and paraoxon to soil nematodes was found, although some effects on nematodes were possible, but at the soil surface only (0.01- and 0.02-m depth).     

Concentration, pH, and surface charge effects on cadmium and lead sorption in three tropical soils

Reactions of heavy metals with soil are important in determining metal fates in the environment. Sorption characteristics of two heavy metals, Cd and Pb, in three tropical soils (Mollisol, Oxisol, and Ultisol) from Puerto Rico were assessed at varying metal concentrations (0 to 1.2 mM) and pH values (approximately 2 to 7). All soils sorbed more Pb than Cd. Sorption maxima were obtained for each metal for the Oxisol and Ultisol soils, but not the Mollisol. Sorption appeared to depend more on soil mineralogy than organic matter content. Sorption isotherms were linear within the sorption envelope with similar slopes for each soil-metal curve, when plotting metal sorption as a function of pH. Cadmium and Pb isotherms yielded average slopes of approximately 36+/-1 and 28+/-1 units (percent increase in metal sorption per 1-unit increase in pH), respectively. Metal sorption depended more on metal type than soil composition. Cadmium sorption displayed a greater pH dependence than Pb. Cadmium sorption was less than or equal to the amount of negative surface charge except at pH values greater than the point of zero net charge (PZNC). This suggests that Cd was probably sorbed via electrostatic surface reactions and/or possible inner-sphere complexation at pH > 3.7. However, the amount of Pb sorbed by the Oxisol was greater than the amount of negative surface charge, suggesting that Pb participates in inner-sphere surface reactions. Lead was sorbed more strongly than Cd in our soils and poses less of a threat to underlying ground water systems due to its lower mobility and availability.     

Modeling the environmental fate of cadmium in a large wastewater irrigation area

The fate of cadmium in soils is governed by spatially heterogeneous processes that proceed from decades to centuries. This study aimed at modeling the fate of Cd within the wastewater irrigation area (WIA) of Braunschweig (Germany). The sandy soils (mainly Dystric Cambisol or Typic Haplumbrept) at this site (28 km2) have received considerable loads of heavy metals by irrigation of municipal wastewater for up to 40 yr. The soils of the WIA are in agricultural use. The main crops are sugar beet (Beta vulgaris L.), potato (Solanum tuberosum L.), and wheat (Triticum aestivum L.). As a result of asparagus (Asparagus officinalis L.) cropping, about 15% of the soils have been converted to Rigosols. In 1996, we measured the vertical distribution (0 to 1.2 m) of soil pH, organic carbon content, and the EDTA-extractable content and the solution phase concentration of Cd at 153 sites. At sites not used for asparagus cultivation, Cd has migrated on average to a depth of about 0.5 m. Due to deep plowing, which accelerates migration, Cd has been displaced on average to about 0.7 m at the Rigosol sites. To model the fate of Cd at the scale of the WIA, we used different parallel soil column approaches. In each column the local model SEFAH was used to simulate both displacement and plant uptake of Cd. The model was fed with measured or randomly generated soil data. The results of retrospective simulations from 1957 to 1996 agreed well with observed Cd profiles. The better the spatial variability of sorption was described, the better the performance. Our simulation results show that Cd pollution of soil at first affects the soil-plant pathway. The breakthrough of Cd to the groundwater is dampened and is delayed for many decades.     

Remediation of saturated soil contaminated with petroleum products using air sparging with thermal enhancement

Pollutants in the form of non-aqueous phase liquids (NAPLs), such as petroleum products, pose a serious threat to the soil and groundwater. A mathematical model was derived to study the unsteady pollutant concentrations through water saturated contaminated soil under air sparging conditions for different NAPLs and soil properties. The comparison between the numerical model results and the published experimental results showed acceptable agreement. Furthermore, an experimental study was conducted to remove NAPLs from the contaminated soil using the sparging air technique, considering the sparging air velocity, air temperature, soil grain size and different contaminant properties. This study showed that sparging air at ambient temperature through the contaminated soil can remove NAPLs, however, employing hot air sparging can provide higher contaminant removal efficiency, by about 9%. An empirical correlation for the volatilization mass transfer coefficient was developed from the experimental results. The dimensionless numbers used were Sherwood number (Sh), Peclet number (Pe), Schmidt number (Sc) and several physical-chemical properties of VOCs and porous media. Finally, the estimated volatilization mass transfer coefficient was used for calculation of the influence of heated sparging air on the spreading of the NAPL plume through the contaminated soil.     

Heavy metal removal from industrial effluents by sorption on cross-linked starch: chemical study and impact on water toxicity

Batch sorption experiments using a starch-based sorbent were carried out for the removal of heavy metals present in industrial water discharges. The influence of contact time, mass of sorbent and pollutant load was investigated. Pollutant removal was dependent on the mass of sorbent and contact time, but independent of the contaminant load. The process was uniform, rapid and efficient. Sorption reached equilibrium in 60 min irrespective of the metal considered (e.g. Zn, Pb, Cu, Ni, Fe and Cd), reducing concentrations below those permitted by law. The material also removed residual turbidity and led to a significant decrease in the residual chemical oxygen demand (COD) present in the industrial water discharge. The germination success of lettuce (Lactuca sativa) was used as a laboratory indicator of phytotoxicity. The results show that the sorption using a starch-based sorbent as non-conventional material, is a viable alternative for treating industrial wastewaters.     

Transport of sulfadiazine in undisturbed soil columns: effects of flow rate, input concentration and pulse duration

Antibiotics reach soils via spreading of manure or sewage sludge. Knowledge on the transport behavior of antibiotics in soils is needed to assess their environmental fate. The effect of flow rate and applied mass, i.e., input concentration and pulse duration, on the transport of 14C-sulfadiazine (SDZ; 4-aminoN-pyrimidin-2-yl-benzenesulfonamide) was investigated with soil column experiments and numerical studies. Sulfadiazine was applied in pulses (6.8, 68 or 306 h) under steady-state (0.051 and 0.21 cm h(-1)) and intermittent flow conditions and at two input concentrations (0.57 and 5.7 mg L(-1)). Breakthrough curves (BTCs) of 14C were measured and for one experiment concentrations of SDZ, and its transformation products 4-(2-iminopyrimidin-1(2H)-yl)aniline (An-SDZ) and N(1)-2-(4-hydroxypyrimidinyl)benzenesulfanilamide (4-OH-SDZ) were determined. After finalizing the leaching experiments, 14C was quantified in different slices of the columns. A lower flow rate led to remarkably lower eluted masses compared with the higher flow rates. All BTCs could be described well using a three-site attachment-detachment model for which a common set of parameters was determined. However, the BTC obtained with the high input concentration was slightly better described with a two-site isotherm-based model. The prediction of the concentration profiles was good with both model concepts. The fitted sorption capacities decreased in the order SDZ > 4-OH-SDZ > An-SDZ. Overall, the experiments reveal the presence of similar mechanisms characterizing SDZ transport. The dependence of model performance on concentration implies that although the three-site attachment-detachment model is appropriate to predict the transport of SDZ in soil columns, not all relevant processes are adequately captured.