Classification of the sugarcane residues and their characteristics—an environmental assessment of mortar with addition of sugarcane residues

Journal of Material Cycles and Waste Management - The use of agro-residue in resource-limited regions can be a smart way for civil construction to reduce costs, reduce emissions of pollutant gases...     

Influence of Processing Additives on the Degradation of Melt-Pressed Films of Poly(ε-Caprolactone) and Poly(Lactic Acid)

Melt-pressed films of polycaprolactone (PCL) and poly(lactic acid) (PLA) with processing additives, CaCO₃, SiO₂, and erucamide, were subjected to pure fungal cultures Aspergillus fumigatus and Penicillium simplicissimum and to composting. The PCL films showed a rapid weight loss with a minor reduction in the molecular weight after 45 days in A. fumigatus. The addition of SiO₂ to PCL increased the rate of (bio)erosion in A. fumigatus and in compost. The use of a slip additive, erucamide, was shown to modify the properties of the film surface without decreasing the rate of bio(erosion). Both the rate of weight loss and the rate of molecular weight reduction of PCL increased with decreasing film thickness. The addition of CaCO₃ to PLA significantly reduced the thermal degradation during processing, but it also reduced the rate of the subsequent (bio)degradation in the pure fungal cultures. PLA without additives and PLA containing SiO₂ exhibited the fastest (bio)degradation, followed by PLA with CaCO₃. The degradation of the PLA films was initially governed by chemical hydrolysis, followed by an acceleration of the weight change and of the molecular weight reduction. PLA film subjected to composting exhibits a rapid decrease in molecular weight, which then remains unchanged during the measurement period, probably because of crystallization.     

Formation of Reactive Gaseous Mercury in the Arctic: Evidence of Oxidation of Hg° to Gas-Phase Hg-II Compounds after Arctic Sunrise

We have measured total gaseous mercury concentrations(Hg°) at Point Barrow, Alaska since September 1998 in aneffort to determine the geographic extent and reaction mechanismof the so-called mercury depletion events (MDE) previouslyreported in the high Arctic at Alert, Canada. Hg° has beensampled now for nearly 2 years at Barrow. In September, 1999, webegan making the first automated measurements of reactive gaseousmercury (RGM) attempted in the Arctic, along with measurements ofHg accumulation in snowpack to determine the fate of the depleted Hg°. During the fall and early winter, Hg°and RGM exhibit only minor variation, Hg° remaining within10% of global background, near 1.6–1.8 ng m^-3. The MDEperiods are quite different, however; within days of Arcticsunrise in January, Hg° exhibits major variations from themean, rapidly dropping as low as 0.05 ng m^-3 and then cyclingback to typical levels, sometimes exceeding global background. These events continue throughout Arctic spring, then end abruptlyfollowing snowmelt, in early June. Prior to Arctic sunrise, RGMremains near detection (<2 pg m^-3), but after sunriseincreases dramatically (to levels as high as 900 pg/m³) insynchrony with the depletion of Hg°. Both phenomenaexhibit a strong diel cycle, in parallel with UV-B. We concludethat MDE's involve rapid in-air oxidation of Hg° to aspecies of RGM by photochemically-driven reactions, probablyinvolving the same reactive bromine and chlorine compoundsinvolved in ozone destruction. Sharp increases in Hg in thesurface snowpack after sunrise coincident with periods of peakRGM suggest surface accumulation of the RGM by dry deposition.     

Assessment of the environmental impact of management measures for the biodegradable fraction of municipal solid waste in São Paulo City

There is increasing concern about landfilling of biodegradable wastes. Therefore, biological treatment processes such as composting and biogasification have been considered as alternative strategies for managing those wastes. In this work, life cycle assessment was employed to compare the environmental impacts of landfilling, composting, and biological treatment of municipal solid waste in S?o Paulo City, Brazil. Energy consumption, recovered resources, and emissions to air and water were quantified and analyzed in terms of their potential contribution to global warming, acidification, and nutrient enrichment impact. The results demonstrated that processes that require high levels of energy consumption, such as wastewater treatment, play an important role in the outcome of environmental impact potentials. It was found that the landfilling of all waste is generally the worst strategy from an environmental point of view. However, significant reductions in the resulting impacts can be accomplished through biogasification and composting of the biodegradable fraction. Regarding composting, the application of a biofilter for gas treatment reduced significantly the gaseous emissions.     

Evaluation of biodegradability of poly(ε-caprolactone)/poly(ethylene terephthalate) blends

The results of an investigation aimed at evaluation of the biodegradability of blends of poly(-caprolactone) (PCL) with poly(ethylene terephthalate) (PET) as the major component are reported. Specimens of the blends, as melt extruded films and/or powders, were submitted to degradation tests under different environmental conditions including full-scale composting, soil burial, bench-scale accelerated aerobic degradation, and exposure to axenic cultures and esterolytic enzymes. Indications have been gained that blending in the melt gives rise to insertion of PCL segments in the PET chain. Copolymers thus attained acted as macromolecular compatibilizers, allowing for a complete miscibility of PCL and PET. The biodegradation detected on the blend samples was, however, well below the values expected from chemical composition and behavior of individual homopolymers under the same environmental conditions. The presence of PET as the major component in PET/PCL blends apparently reduces the propensity of PCL to be degraded, at least in the investigated composition range. The degradation data collected under different environmental conditions indicate that the full-scale composting system is the most efficient among the tested degradation procedures.     

Chronic toxicity of the ‘water-soluble fraction’ of Norman Wells crude oil to juvenile fish

Young rainbow trout were exposed to Norman Wells crude oil for periods as long as 55 d. Mortality was light for the first few days, but it continued throughout exposure with more rapid and increased mortality at the higher exposure levels. The mortality was generally exacerbated by the presence of oil dispersants Corexit 7664 or 9600. Fish surviving the 55-day experiment showed severe fin erosion and apparent ‘flooding’, since mean body water content was increased from about 84% to over 90%. We hypothesize that the oil affected the ability of the fish to regulate their water content.     

Electrosynthesis of κ-Carrageenan Complexes with Gelatin

Electrosynthesis at pH 9, 12, and 11 of -carrageenan–gelatin complexes from electrolytes containing the components at proportions varying from 1:5 to 5:1 provided complexes in the composition varying in a range from 1:10 to 1:1.8. Components were bound mainly electrostatically, although partial insolubility of complexes in 7 M aqueous urea pointed to a part of the complexes bound covalently. None of the performed tests except solubility could confirm formation of covalent complexes. The complexation of -carrageenan to gelatin significantly increased the thermal stability of carrageenan, whereas the thermal stability of gelatin increased rather insignificantly.     

Deterioration of Polyamideamine–Epichlorohydrin (PAE) in Aqueous Solutions During Storage: Structural Changes of PAE

Structural changes of polyamideamine–epichlorohydrin (PAE) in solution during storage at 4 °C and pH 4.2–4.5 for up to 8.9 years were studied by ¹H- and ¹³C-NMR analyses, colloidal titration and others. NMR signals due to 3-hydroxy-azetidinium groups of PAE decreased during storage, and correspondingly 2, 3-dihydroxypropyl groups were formed by the ring opening. The content of 3-hydroxy-azetidinium groups in PAE determined by ¹H-NMR were similar to that determined by the colloidal titration, although the former was higher than the latter. About 50% of the 3-hydroxy-azetidinium groups present in the fresh PAE were lost during storage for 8.9 years. Furthermore, ¹³C-NMR analysis revealed that significant depolymerization of polyamideamine chains occurred by hydrolysis of the amide linkages during storage. Rough evaluation of number average degree of polymerization (DPn) of the amideamine repeating unit showed that the DPn decreased from 12 to 2 during storage for 8.9 years.     

PHB/V in Extrusion Coating of Paper and Paperboard—Study of Functional Properties. Part II

Extrusion coating experiments were carried out in the pilot line at Tampere University of Technology (Institute of Paper Converting). Commercially produced 3-hydroxybutyrate/3-hydroxyvalerate copolymer, commercial Finnish paper, and paperboard qualities were utilized as substrates. Functional properties, such as heat-sealing and hot-tack properties, pinhole density, and water vapor transmission rate were determined. PHB/V coatings exhibited approximately four–six times higher water vapor transmission rates (WVTR) than the corresponding LDPE coatings. The incorporation of wax or tall oil rosin into PHB/V improved its water vapor barrier. Curling of PHB/V was reduced by the addition of wax or tall oil rosin into the base polymer. PHB/V provided good heat-sealing characteristics at rather high sealing temperatures. Pinhole density was substantially reduced by using higher molecular weight PHB/V and by incorporating plasticizer into PHB/V.     

Influence of regulation on the productivity of waste utilities. What can we learn with the Portuguese experience?

This paper examines the merits and the perverse effects of quality of service regulation in the performance of urban waste services when implemented alone and compares the performance of different economic regulatory methods. By means of a productivity analysis, we investigate the influence of a five-year period of regulation on the performance of Portuguese urban waste utilities using an unbalanced panel data for the period 2001-2008. Different non-parametric methods were applied to estimate the productivity change, all leading to similar outcomes. We observed a tendency of productivity decline in the urban waste utilities and concluded that in spite of the unequivocal improvements in the quality of service induced by sunshine regulation, more should be done as far as economic regulation is concerned. We also found that the use of sunshine regulation together with low incentive economic regulatory methods is not positive, leading to overinvestment rather than to value for money.     

Study of Trace and Heavy Metals in Rural and Urban Aerosols of Uludağ and Bursa (Turkey)

The concentrations of heavy, trace elements and major ions measuredin the Uluda and Bursa aerosols were investigated to assess size distributions, spatial and temporal variability, sources and source regions affecting the composition of aerosols in Uluda and Bursa. A total of 81 samples were collected in two sites, one in Bursa city and another in the Uluda Mountain during two sampling campaigns. Daily samples were collected using a high volume sampler on Whatman 41 cellulose filters in Uluda, while three days interval samples were collected in Bursa using an automatic dichotomous sampler on PTFE Teflon filters. Samples were analysed for 15 trace and heavy metals (Al, Fe, Ba, Na, Mg, K, Mn, Ca, Cu), (V, Pb, Cd, Cr, Ni, Zn), and 4 major ions (SO₄ ^2-, NO₃ ^-, Cl^-), (NH₄ ⁺) using ICP-AES, GFAAS, HPLC and UV/VIS Spectrophotometer,respectively. In general, concentrations of the metals measured inUluda aerosols were lower than those in Bursa. The concentrations of crustal elements were higher in summer than winter, while anthropogenic elements had higher concentrations in winter than summer. Most of the mass of crustal elements was concentrated in the coarse mode while the mass of the heavy metals was concentrated in the fine mode. Factor analysis revealed four factors with sources including crustal, industrial and combustion. Back trajectory calculations were used to determine long range contributions. These calculations showed that contributions were mostly from European countries, former Soviet Union countries, Black Sea and North Africa.     

The introduction of recycled-aggregate concrete specifications in Japan and the research into the freezing–thawing resistance of recycled-aggregate concrete

Journal of Material Cycles and Waste Management - In Japan, recycled concrete aggregate (RCA) and recycled-aggregate concrete (RAC) are standardized in the Japanese Industrial Standards (JIS) A...     

Effects of Poly(Ethylene Glycol) on the Production of Poly(β-Hydroxybutyrate) by Azotobacter vinelandii UWD

Azotobacter vinelandii UWD, ATCC 53799, an engineered strain derived from Azotobacter vinelandii UW was used in the poly(ethylene glycol) (PEG)-modulated synthesis of poly(-hydroxybutyrate) (PHB). To the best of our knowledge, this is the first report on modulating the production of PHB by amending the fermentation broth with PEG using A. vinelandii UWD. It was determined that A. vinelandii UWD is prone to back-mutation to the parent strain; hence fermentation experiments require the use of the antibiotic rifampicin. Diethylene glycol (DEG) and PEGs with molecular weights of 400, 2000, and 3400 Da and pentaerythritol ethoxylate (PEE) were used in the modulated fermentation experiments in a concentration of 2% (w/v). The molecular weight of the resulting polymers was reduced by up to 78%. No impact on the productivity of the strain was observed. Spectroscopic evidence showed that PEG-modulated synthesis resulted in the covalent attachment of the ethylene glycol moiety only when a small molecule, DEG, was used. PEGs had the same effects on the polymer formation in terms of molecular weight reduction as DEG, but no spectroscopic evidence was found for the formation of a covalent linkage between PHB and higher molecular weight PEGs.     

Recovery of platinum and synthesis of glass–ceramic from spent automotive catalyst via co-treatment process with coal fly ash

Journal of Material Cycles and Waste Management - Spent automotive catalyst (SAC) has attracted attention because of containing platinum group metals (PGMs) along with hazardous materials such as...     

Synthesis of Poly(β-hydroxybutyrate) in Simulated Microgravity: An Investigation of Aeration Profiles in Shake Flask and Bioreactor

The microbial strain Azotobacter vinelandii UWD was grown under conditions of simulated microgravity in the National Aeronautics and Space Administration (NASA) Bioreactor. Bacterial growth in simulated microgravity differed significantly from that observed in conventional shake flask experiments: Cells tended to grow in a cluster-like pattern and polymer production started immediately after exposing them to conditions of simulated microgravity, and no lag time was observed. It was imperative to differentiate between the effects derived from microgravity and those imposed by the altered oxygen supply in the bioreactor. Aeration conditions were studied in both reactor types and a gas supply profile was developed for the bioreactor. This supply profile allowed for similar amounts of dissolved oxygen in the bioreactor and the shake flask in the initial stage of the fermentation and, therefore, for an evaluation of the effects of microgravity on biopolyester-producing bacteria. Since the optical density that is conventionally used as a measure for the cell growth could not be used due to the cluster-like growth pattern of the cells, it was determined that bacterial growth behavior in the bioreactor can be monitored through glucose or oxygen consumption.     

Chemical and Ecotoxicological Characterisation of Oil–Water Systems

An ongoing chemical and ecotoxicological study of Water Accommodated Fraction of oils is presented and the preliminary findings are discussed. The study aims at obtaining improved and realistic data on potential environmental effects of various oils released and weathered at sea. Such data will be used for improving algorithms in present fate and effect models for damage assessment studies and “Net Environmental Benefit Analysis” of response alternatives in various spill scenarios. Preliminary results show that models used to assess effects in the water column will need to resolve the water soluble fraction of oils into more than one single bulk parameter to produce realistic estimates of effects.     

Influence of Geometry on the Mean Flow within Urban Street Canyons – A Comparison of Wind Tunnel Experiments and Numerical Simulations

A comparison between numerical simulations and wind tunnel modelling has been performed to examine the variation with streamwise aspect ratio (width/height, W/H) of the mean flow patterns in a street canyon. For this purpose a two-dimensional (2-D) cavity was subjected to a thick turbulent boundary layer flow perpendicular to its principal axis. Five different test cases, W/H = 0.3, 0.5, 0.7, 1.0 and 2.0, have been studied experimentally with flow measurements taken using pulsed-wire anemometry. The results show that the skimming flow regime, with a large vortex in the canyon, occurred for all the cases investigated. For the cavities with W/H 0.7 a weaker secondary circulation developed beneath the main vortex. The narrower the canyon, the smaller the wind speed close to the cavity ground, giving increasingly poor ventilation qualities. The corresponding numerical results were obtained with the Computational Fluid Dynamics (CFD) code CHENSI that uses the standard k- model. The intercomparison showed good agreement in terms of the gross features of the mean flow for all the geometries examined, although some detailed differences were observed.     

Environmental Degradation of Biodegradable Polyesters: 3. Effects of Alkali Treatment on Biodegradation of Poly(ε-Caprolactone) and Poly[(R)-3-Hydroxybutyrate) Films in Controled Soil

The poly(-caprolactone) (PCL) and poly[(R)-3-hydroxybutyrate] (R-PHB) films with a hydrophilic surface were prepared by the alkali treatment of their as-cast films in NaOH solutions of different concentrations. The alkali-treated PCL and R-PHB films, as well as the as-cast PCL and R-PHB films, were biodegraded in soil controlled at 25°C and the effects of alkali treatment or surface hydrophilicities on their biodegradation were investigated by the use of gravimetry, gel permeation chromatography (GPC), scanning electron microscopy (SEM), and polarization optical microscopy. It became evident that the alkali treatment enhanced the hydrophilicities and biodegradabilities of the PCL and R-PHB films in soil. The biodegradabilities of the as-cast aliphatic polyester films in controlled soil decreased in the following order: PCL > R-PHB > PLLA, in agreement with that in controlled static seawater.     

The Impact of the Macaíba Components Addition on the Biodegradation Acceleration of Poly (Ɛ-Caprolactone) (PCL)

Journal of Polymers and the Environment - Nowadays, there is a need to obtain eco-friendly materials, especially plastics that are responsible for most of the environmental pollution. In this...