Investigating solid waste production and associated management practices in private dental units

In the municipality of Thessaloniki in 2006 mercury-bearing dental wastes were not managed properly by 80% of dentists and metal-bearing waste was handled in accordance with internationally established best management practices by less than 50% of dentists. Those results were documented through a biennial field-based research study that took place in private dental units within the Thessaloniki Urban Area. For quantifying the waste produced, structured questionnaires were used and interviews with dentists were performed. In the present work, results of this survey are presented; critical parameters and factors affecting the quantity and quality of the dental waste stream are reported together with the analysis and classification of dominant conditions and needs of the dental sector in the waste management field.     

Medical waste management in Jordan: a study at the King Hussein Medical Center

As in many other developing countries, the generation of regulated medical waste (RMW) in Jordan has increased significantly over the last few decades. Despite the serious impacts of RMW on humans and the environment, only minor attention has been directed to its proper handling and disposal. This study was conducted in the form of a case study at one of Jordan's leading medical centers, namely, the King Hussein Medical Center (KHMC). Its purpose was to report on the current status of medical waste management at KHMC and propose possible measures to improve it. In general, it was found that the center's administration was reasonably aware of the importance of medical waste management and practiced some of the measures to adequately handle waste generated at the center. However, it was also found that significant voids were present that need to be addressed in the future including efficient segregation, the use of coded and colored bags, better handling and transfer means, and better monitoring and tracking techniques, as well as the need for training and awareness programs for the personnel.     

中国危险废物产生特征与转移管理现状

论述了我国危险废物产生特征及处理现状,分析了我国危险废物转移流程及其转移规模和材料类型,提出合理布局危险废物处理产业,应用物联网和区块链等新兴技术,完善危险废物日常统计和监管.     

Biomedical waste management in nursing homes and smaller hospitals in Delhi

The management of biomedical waste is a crucial issue in health and environmental management. Rules in India were promulgated in 1998, originally with a deadline of December 2000 and extended to December 2002; however, the actual situation remains far from satisfactory. A study conducted in 2001 by CEE, New Delhi; indicated an implementation deficit. To gauge the present situation, a survey was undertaken during 2005-2006. A systematic analysis of current biomedical waste management practices in smaller nursing homes and hospitals in Delhi was carried out. A total of 53 nursing homes, with bed strengths ranging from 20 to over 200, were included. The survey results show that there is a marked improvement in the segregation practices of biomedical waste in small private hospitals and nursing homes. The majority of nursing homes and hospitals were found to be using a service provider for the collection, management, and disposal of healthcare wastes. Data was collected through a questionnaire and field visits. This paper discusses the relevant data indicative of current practices of healthcare waste management in the nursing homes and small healthcare facilities in Delhi.     

Biodiesel production using waste frying oil

Waste sunflower frying oil is used in biodiesel production by transesterification using an enzyme as a catalyst in a batch reactor. Various microbial lipases have been used in transesterification reaction to select an optimum lipase. The effects of various parameters such as temperature, methanol:oil ratio, enzyme concentration and solvent on the conversion of methyl ester have been studied. The Pseudomonas fluorescens enzyme yielded the highest conversion. Using the P. fluorescens enzyme, the optimum conditions included a temperature of 45 °C, an enzyme concentration of 5% and a methanol:oil molar ratio 3:1. To avoid an inhibitory effect, the addition of methanol was performed in three stages. The conversion obtained after 24 h of reaction increased from 55.8% to 63.84% because of the stage-wise addition of methanol. The addition of a non-polar solvent result in a higher conversion compared to polar solvents. Transesterification of waste sunflower frying oil under the optimum conditions and single-stage methanol addition was compared to the refined sunflower oil.     

Medical solid waste management status in Zimbabwe

Journal of Material Cycles and Waste Management - In Zimbabwe, management of medical solid waste is emerging as a visible dilemma. This is attributed to population explosion as well as outbreak of...     

Choosing remediation and waste management options at hazardous and radioactive waste sites

This article discusses a process for finding insights that will allow federal agencies and environmental professionals to more effectively manage contaminated sites. The process is built around what Etzioni (1968) called mixed‐scanning, that is, perpetually doing both comprehensive and detailed analyses and periodically re‐scanning for new circumstances that change the decision‐making environment. The article offers a checklist of 127 items, which is one part of the multiple‐stage scanning process. The checklist includes questions about technology; public, worker, and ecological health; economic cost and benefits; social impacts; and legal issues. While developed for a DOE high‐level radioactive waste application, the decision‐making framework and specific questions can be used for other large‐scale remediation and management projects. © 2002 Wiley Periodicals, Inc.     

Infectious waste management in Japan: assessment of current trends in waste measurement and reporting in general and psychiatric hospitals

Infectious waste (IW) may include waste contaminated with blood and other bodily fluids, cultures of infectious agents from laboratory work, or waste from patients with infections. Accurate and standardized measurement is an important aspect of waste management. In Japan, data on infectious waste generated by hospitals are limited. Therefore, we aimed to identify the current status of infectious waste management and disposal in hospitals. To this end, data on the amount of IW generated and IW disposal costs from 54 public hospitals—25 general hospitals and 29 psychiatric hospitals—between April 2015 and March 2016 were analyzed. The results revealed the absence of a standardized unit of IW measurement, with 33 hospitals reporting IW in kilograms and 21 hospitals reporting it in liters. As expected, the amount of IW generated at psychiatric hospitals was significantly lower than that generated at general hospitals. The amount of IW produced correlated positively with the number of in-patients. Disposal costs varied not only by hospital type and prefecture but also across hospitals of the same type within the same prefecture. A system that consolidates IW data management using standardized units is necessary.

     

Gas production, composition and emission at a modern disposal site receiving waste with a low-organic content

AV Miljø is a modern waste disposal site receiving non-combustible waste with a low-organic content. The objective of the current project was to determine the gas generation, composition, emission, and oxidation in top covers on selected waste cells as well as the total methane (CH₄) emission from the disposal site. The investigations focused particularly on three waste disposal cells containing shredder waste (cell 1.5.1), mixed industrial waste (cell 2.2.2), and mixed combustible waste (cell 1.3). Laboratory waste incubation experiments as well as gas modeling showed that significant gas generation was occurring in all three cells. Field analysis showed that the gas generated in the cell with mixed combustible waste consisted of mainly CH₄ (70%) and carbon dioxide (CO₂) (29%) whereas the gas generated within the shredder waste, primarily consisted of CH₄ (27%) and nitrogen (N₂) (71%), containing no CO₂. The results indicated that the gas composition in the shredder waste was governed by chemical reactions as well as microbial reactions. CH₄ mass balances from three individual waste cells showed that a significant part (between 15% and 67%) of the CH₄ generated in cell 1.3 and 2.2.2 was emitted through leachate collection wells, as a result of the relatively impermeable covers in place at these two cells preventing vertical migration of the gas. At cell 1.5.1, which is un-covered, the CH₄ emission through the leachate system was low due to the high gas permeability of the shredder waste. Instead the gas was emitted through the waste resulting in some hotspot observations on the shredder surface with higher emission rates. The remaining gas that was not emitted through surfaces or the leachate collection system could potentially be oxidized as the measured oxidation capacity exceeded the potential emission rate. The whole CH₄ emission from the disposal site was found to be 820 ± 202 kg CH₄ d⁻¹. The total emission rate through the leachate collection system at AV Miljø was found to be 211 kg CH₄ d⁻¹. This showed that approximately ¼ of the emitted gas was emitted through the leachate collections system making the leachate collection system an important source controlling the overall gas migration from the site. The emission pathway for the remaining part of the gas was more uncertain, but emission from open cells where waste is being disposed of or being excavated for incineration, or from horizontal leachate drainage pipes placed in permeable gravel layers in the bottom of empty cells was likely.     

Centralized incineration treatment of infectious waste for regional hospitals in Taiwan

Taiwan has a high population density. Recently, rapid advances of medical activities have caused an environmental problem in managing the wastes generated by hospitals or clinics. Government regulations, public concern and an increased commitment to a clean environment have also brought more attention to the handling problems of medical waste. A project to plan and manage the first centralized incineration plant for infectious hospital waste has been carried out in Taiwan. This paper summarizes the results of the execution of this project. It addresses the experience gained in siting a regional incinerator, its technical operation to meet local environmental regulations and the management of the regional plant. Public concern against incineration was considered to be the most important criterion to address during establishment of the incinerator, as well as good operational performance. The operational problems encountered most frequently in the regional plant with possible causes and solutions to the problems are summarized in this paper. It was also found that a delivery manifest was useful to manage the delivery of infectious waste.     

Significance of biogas production in waste tips

In a waste tip methane fermentation should be promoted as much as possible in order to minimize contamination of leachate and groundwater. In this paper the production of biogas is mathematically described as a first-order process. The degradable organic fraction of municipal refuse is subdivided into three fractions with different half-lifes (1, 5 and 15 years). If other categories of waste are present (e.g. industrial refuse or demolition waste) one should know the organic matter content per category and if possible some information on the degradability of the organic fractions. Field tests can also give information, e.g. the pressure lowering in and around an extraction well may be used to calculate the gas production rate and the radius of influence.Without recovery the gas escapes into the atmosphere and is (partly) oxidized by microbes in the soil cover. This may create anaerobic conditions in the soil cover causing injury to vegetation.     

略谈清洁生产战略在医院废物处理中的指导意义

清洁生产战略作为环境管理的一项手段,是实现可持续发展战略的一项重要举措.医院废物作为一种危险废物,在其处理处置过程中,也应引入清洁生产思想,这对于有效利用资源和能源,减轻环境压力,都具有重要意义.     

Impact of sequential hybrid pretreatment in anaerobic digestion of food waste and garden waste co-digestion on waste characteristics and biogas production

Journal of Material Cycles and Waste Management - One-third of food produced results as food waste, with no organized and sustainable disposal, and ends up in landfills. Garden waste is yet another...     

Co-composting of green waste and food waste at low C/N ratio

In this study, co-composting of food waste and green waste at low initial carbon to nitrogen (C/N) ratios was investigated using an in-vessel lab-scale composting reactor. The central composite design (CCD) and response surface method (RSM) were applied to obtain the optimal operating conditions over a range of preselected moisture contents (45–75%) and C/N ratios (13.9–19.6). The results indicate that the optimal moisture content for co-composting of food waste and green waste is 60%, and the substrate at a C/N ratio of 19.6 can be decomposed effectively to reduce 33% of total volatile solids (TVS) in 12 days. The TVS reduction can be modeled by using a second-order equation with a good fit. In addition, the compost passes the standard germination index of white radish seed indicating that it can be used as soil amendment.     

Biodiesel production from waste frying oils and its quality control

The use of biodiesel as fuel from alternative sources has increased considerably over recent years, affording numerous environmental benefits. Biodiesel an alternative fuel for diesel engines is produced from renewable sources such as vegetable oils or animal fats. However, the high costs implicated in marketing biodiesel constitute a major obstacle. To this regard therefore, the use of waste frying oils (WFO) should produce a marked reduction in the cost of biodiesel due to the ready availability of WFO at a relatively low price.In the present study waste frying oils collected from several McDonald’s restaurants in Istanbul, were used to produce biodiesel. Biodiesel from WFO was prepared by means of three different transesterification processes: a one-step base-catalyzed, a two-step base-catalyzed and a two-step acid-catalyzed transesterification followed by base transesterification. No detailed previous studies providing information for a two-step acid-catalyzed transesterification followed by a base (CH₃ONa) transesterification are present in literature. Each reaction was allowed to take place with and without tetrahydrofuran added as a co-solvent. Following production, three different procedures; washing with distilled water, dry wash with magnesol and using ion-exchange resin were applied to purify biodiesel and the best outcome determined. The biodiesel obtained to verify compliance with the European Standard 14214 (EN 14214), which also corresponds to Turkish Biodiesel Standards.     

废聚乙烯塑料膜再生利用直接制膜工艺研究

介绍了废聚乙烯塑料膜及制品的循环再生利用技术。原料100%采用废聚乙烯塑料膜;不需造粒、熔粒,直接一次熔融制成新塑料膜;再生的农用地膜和包装膜经权威部门检验测试,各项质量技术指标均达到或超过国家标准,少部分指标超国标5倍以上。由于减少了工序,节约了能源,降低了成本,彻底突破了传统工艺在废聚乙烯塑料膜再生利用过程中,只能添加10%废料的约束;解决了必须经过造粒、二次熔融才能成膜的技术难题。其生产工艺独特、新颖,无"三废"产生。为节约资源、节约能源、循环经济、综合利用、减少污染、保护环境,创出了一条全新的技术途径。     

Medical waste management in Ibadan, Nigeria: obstacles and prospects

Quantification and characterization of medical waste generated in healthcare facilities (HCFs) in a developing African nation has been conducted to provide insights into existing waste collection and disposal approaches, so as to provide sustainable avenues for institutional policy improvement. The study, in Ibadan city, Nigeria, entailed a representative classification of nearly 400 healthcare facilities, from 11 local government areas (LGA) of Ibadan, into tertiary, secondary, primary, and diagnostic HCFs, of which, 52 HCFs were strategically selected. Primary data sources included field measurements, waste sampling and analysis and a questionnaire, while secondary information sources included public and private records from hospitals and government ministries. Results indicate secondary HCFs generate the greatest amounts of medical waste (mean of 10,238 kg/day per facility) followed by tertiary, primary and diagnostic HCFs, respectively. Characterised waste revealed that only approximately 3% was deemed infectious and highlights opportunities for composting, reuse and recycling. Furthermore, the management practices in most facilities expose patients, staff, waste handlers and the populace to unnecessary health risks. This study proffers recommendations to include (i) a need for sustained cooperation among all key actors (government, hospitals and waste managers) in implementing a safe and reliable medical waste management strategy, not only in legislation and policy formation but also particularly in its monitoring and enforcement and (ii) an obligation for each HCF to ensure a safe and hygienic system of medical waste handling, segregation, collection, storage, transportation, treatment and disposal, with minimal risk to handlers, public health and the environment.     

Medical waste generation in selected clinical facilities in Taiwan

This study investigated the type and amount of medical waste generated from small clinical facilities in Taiwan. We sampled 200 small medical establishments, with few or no patient beds, to survey the wastes generated and disposed. The surveyed medical facilities consisted of four groups including private clinics, medical laboratories, blood centers and public clinics. Private clinics providing surgical, dental, obstetrical, and dialysis services were included in this survey because they may generate higher amounts of infectious waste than other specialties. The overall mean general waste production rate was 3.97 kg/bed/day (or 0.075 kg/patient/day) at all the surveyed facilities, higher than that obtained from larger hospitals in Taiwan, which ranged from 2.41 to 3.26 kg/bed/day. The highest amount of infectious wastes generated among the four groups of facilities were from blood centers (3.14 kg/bed/day), followed by private clinics, medical laboratories and public clinics (1.91, 1.07, and 0.053 kg/bed/day, respectively). The overall average was 2.08 kg/bed/day. This study suggests that the waste generated at small medical facilities ranged widely.     

Mechanical-biological waste treatment and the associated occupational hygiene in Finland

A special feature of waste management in Finland has been the emphasis on the source separation of kitchen biowaste (catering waste); more than two-thirds of the Finnish population participates in this separation. Source-separated biowaste is usually treated by composting. The biowaste of about 5% of the population is handled by mechanical-biological treatment. A waste treatment plant at Mustasaari is the only plant in Finland using digestion for kitchen biowaste. For the protection of their employees, the plant owners commissioned a study on environmental factors and occupational hygiene in the plant area. During 1998-2000 the concentrations of dust, microbes and endotoxins and noise levels were investigated to identify possible problems at the plant. Three different work areas were investigated: the pre-processing and crushing hall, the bioreactor hall and the drying hall. Employees were asked about work-related health problems. Some problems with occupational hygiene were identified: concentrations of microbes and endotoxins may increase to levels harmful to health during waste crushing and in the bioreactor hall. Because employees complained of symptoms such as dry cough and rash or itching appearing once or twice a month, it is advisable to use respirator masks (class P3) during dusty working phases. The noise level in the drying hall exceeded the Finnish threshold value of 85 dBA. Qualitatively harmful factors for the health of employees are similar in all closed waste treatment plants in Finland. Quantitatively, however, the situation at the Mustasaari treatment plant is better than at some Finnish dry waste treatment plants. Therefore is reasonable to conclude that mechanical sorting, which produces a dry waste fraction for combustion and a biowaste fraction for anaerobic treatment, is in terms of occupational hygiene better for employees than combined aerobic treatment and dry waste treatment.     

Communication at inactive hazardous waste sites

The remediation of inactive hazardous waste sites frequently involves a protracted negotiation with the respective state or federal agency and the entity responsible for creating the site and paying the costs. At orphaned sites, decisions are made almost exclusively by agency staff. Most of remedial decisions are made with little input or participation by the interested public. The public usually receives information in a highly technical and difficult-to-understand format after decisions are made. This ineffective form of communication can lead to mistrust and delays or changes in the remediation process. Effective public participation requires multidirectional modes of communication that provide for active and full involvement by all interested parties. At the present time, most agencies pay minimal attention to the needs of the interested public, often leaving area residents suspicious and dissatisfied with the overall program. There is an opportunity to significantly improve the public participation component of the federal Super-fund program through reauthorization. Subtle changes in the program can result in a significant increase of the public's sense of participation and overall satisfaction.