Bioanalytical tools for monitoring polar pollutants

Bioanalytical tools offer some advantages over classical analytical techniques in terms of selectivity, sensitivity, short assay times, and reduced cost of analysis. This makes them promising for use in monitoring and screening of environmental pollutants for the future. The present review will present an overview of primarily enzyme- and immuno-based assay techniques presently developed for environmental purposes. In most cases, the principle of these methods is based on the correlation between the toxicity of a target compound and a decrease in the activity of a biomarker such as an enzyme. Organophosphorus (e.g. paraoxon, parathion, fonofos) and carbamate (e.g. aldicarb, carbofuran) insecticides selectively inhibit cholinesterases and imidazolinones and sulfonylureas affect the enzyme acetolactate synthase. Triazine herbicides and some phenol derivatives reduce the activity of tyrosinase and dithiocarbamate fungicides (i.e. maneb, zineb) inhibit aldehyde dehydrogenase. Some toxic compounds have the property of reducing the intensity of certain natural processes such as photosynthesis and bioluminescence. Certain phenolic compounds are specific substrates for the enzymes tyrosinase and laccase, and non-specific for e.g. peroxidases and dehydrogenases. Based on the above properties, both electrochemical and optical methods for detection of pesticides and phenols have been developed and will be presented. Determination of environmental pollutants using immunoassays is a continuously growing area. The advantages offered by these methods are again improved specificity, sensitivity, reduced cost, and the possibility for analysing real samples without pre-treatment in a shorter time period than with classical methods. The most suitable analytes for immunoassay developments were triazine- and phenoxyacid herbicides, but phenols and other classes of pesticides represent promising targets for the future and will be discussed. ©     

Review of konjac glucomannan

The paper reviews the solution and gelling properties of konjac glucomannan (KGM) and its interactions with other hydrocolloids such as xanthan and carrageenan for food applications. Research activities in the area of KGM processing in environmentally friendly aqueous environments have been discussed for coatings and packaging applications. Guest Editor: Heidi Schreuder-Gibson, U.S. Army Natick RD&E Center, Kansas Street, Natick, Massachusetts 01760-5020     

Removal of Linear and Branched p-Alkylphenols from Aqueous Solution by Combined Use of melB Tyrosinase and Chitosan Beads

In this study, melB tyrosinase was applied for enzymatic removal of linear and branched p-alkylphenols from aqueous solutions. First, systematic studies were carried out to estimate the effects of the process parameters such as the temperature, pH value, and enzyme dose on quinone conversion of p-cresol as a model phenol compound. A variety of p-alkylphenols were removed from aqueous solutions through the tyrosinase-catalyzed quinone conversion and subsequent nonenzymatic adsorption of quinone derivatives on chitosan beads at pH 6.0 and 30 °C under the optimum conditions determined for p-cresol. The % removal values of 98–100 were obtained for p-n-alkylphenols. Branched p-alkylphenols with a weak estrogenic activity containing 4-tert-butylphenol and 4-tert-pentylphenol, which underwent no quinone conversion by commercially available mushroom tyrosinase in the absence of H₂O₂, were also effectively removed by further increasing either the melB tyrosinase concentration or the amount of added chitosan beads. The present technique is much effective in the fact that a series of reactions rapidly progress under mild conditions and the chitosan beads can be readily separated from the reaction medium after the enzymatic treatment.     

A Novel Environmentally Compatible Bio-Based Product from Gelatin and Natural Rubber: Physical Properties

The objective of the present work was to study the preparation of a novel bio-based product from gelatin (GT) and natural rubber (NR) using potassium persulphate (KPS) as an initiator. The GT and NR composites (GT/NR composites) containing KPS were formed in an aqueous latex solution. The chemical structure of the GT/NR composite was characterized by ATR-FTIR, and XRD. The highest tensile strength was observed in a 9/1 GT/NR composite and the elongation at break of this composite was improved by the addition of both NR and glycerol. In addition, the swelling ratio increased as a function of increasing GT content in the composite. The thermal stability of the GT was improved after the formation of the chemical interaction between the NR and GT helped by the KPS. The best ratio of the GT/NR composite was 3/7 GT/NR. This environmentally friendly composite easily decomposed in natural soil within 30 days. The novel biopolymer showed high mechanical properties, water resistance and was produced in an environmentally compatible process. The NR was able to improve some of the physical and mechanical properties of GT biofilms produced from the composite. Possible future applications of this composite are for medical materials, and the packaging and life extension of food products.     

Preparation and Characterization of Hydrogel Based on Poly(vinyl alcohol) Cross-Linked by Different Cross-Linkers Used to Dry Organic Solvents

Poly(vinyl alcohol) (PVA) hydrogels were chemically cross-linked with/without different cross-linkers such as glutaraldehyde and epichlorohydrin, in the presence of a catalyst, or activator (potassium hydroxide) to produce three types of hydrogels. The structures of PVA and the prepared gel types were determined by FTIR spectroscopy, the mechanical and thermal properties, of these hydrogels were examined. The effects of different pH values and temperatures on the swelling properties of the prepared gels were examined. From the obtained results, it was found that, the low concentration of the cross-linker produced hydrogel with moderate properties, but in absence of the cross-linker, the obtained hydrogel exhibited good properties and can be used as friendly environmentally moisture absorbents from the organic solvents. The insolubility and swelling properties of gels were tested in these solvents. The results indicated that these hydrogels can be used as moisture absorbents and solvent dryers.     

Chemically Functionalized Plant Fibers and Carbon Nanotubes for High Compatibility and Reinforcement in Polylactic Acid (PLA) Composite

In this study, surface modification is used to improve the compatibility of Kenaf fibers (KFs) and multi-walled carbon nanotubes (MWCNTs) in a polylactic acid (PLA) matrix, as well as to enhance the mechanical properties. Through the use of a silane coupling agent, the KF is grafted with functional groups to generate a chemical bond with the PLA; the modified KF shows high compatibility in the PLA matrix. Compared to the bare PLA, the optimal KF/MWCNT/PLA composite (PC1F30-OX) shows increases of 58% in tensile strength, and 113% in impact strength. A small addition of MWCNTs (1 wt%) dramatically improves the antistatic ability by lowering the surface resistance to 3.47 GΩ. With the addition of hydrophilic KF into the PLA, the composite becomes much more environmentally friendly, and the biodegradation rate can be controlled by the amount of KF added. The addition of hydrophilic KF allowed the composite to accommodate more enzyme to hasten the biodegradation; almost complete decomposition occurred after 11 weeks.     

Performance and emission study of biodiesel from leather industry pre-fleshings

The possible use of pre-fleshing wastes from tanneries in the production of biodiesel fuel was examimed in our previous study in 2005. In this study, engine performance and emission values of biodiesel obtained from these wastes have been investigated and compared to petrodiesel fuel. The test results demonstrated that although the wheel force and power of biodiesel fuel is slightly lower than petrodiesel and the acceleration periods are accordingly longer, the emission values of hydrocarbons and particulate matter were found to be considerably lower with biodiesel. Thus, it has been shown that a waste byproduct can be utilized in the production of an environmentally friendly fuel, which can be used in some diesel engines without a need for major adjustment, providing economic and ecological benefits.     

Influence of corn steep liquor and glucose on colonization of control and CCB (Cu/Cr/B)-treated wood by brown rot fungi

There are increasing problems with regard to the disposal of treated wood waste. Due to heavy metals or arsenic in impregnated wood waste, burning and landfill disposal options are not considered to be environmentally friendly solutions for dealing with this problem. Extraction of the heavy metals and recycling of the preservatives from the wood waste is a much more promising and environmentally friendly solution. In order to study the scale up of this process, copper/chromium/boron-treated wood specimens were exposed to copper tolerant (Antrodia vaillantii and Leucogyrophana pinastri) and copper sensitive wood decay fungi (Gloeophyllum trabeum and Poria monticola). Afterwards, the ability of fungal hyphae to penetrate and overgrow the wood specimens was investigated. The fungal growths were stimulated by immersing the specimens into aqueous solution of glucose or corn steep liquor prior to exposure to the fungi. The fastest colonization of the impregnated wood was by the copper tolerant A. vaillantii. Addition of glucose onto the surface of the wood specimens increased the fungi colonization of the specimens; however, immersion of the specimens into the solution of corn steep liquor did not have the same positive influence. These results are important in elucidating copper toxicity in wood decay fungi and for using these fungi for bioremediation of treated wood wastes.     

The Effect of Fiber Pretreatment and Compatibilizer on Mechanical and Physical Properties of Flax Fiber-Polypropylene Composites

Recently, investigations have been conducted on the use of natural fibers as reinforcement in low-melting point thermoplastics to improve mechanical properties of composites. However, due to some limitations of natural fibers, composite formulation and processing parameters must be controlled to produce a product with improved properties. This study was conducted to investigate the influence of flax fiber loading, use of compatibilizer and pretreatment on physical and mechanical properties of compression-molded composite. In this study, untreated and treated (sodium hydroxide-treated and mild-bleached flax fibers) fibers at 15% and 30% of the total product mass were used in formulations. To investigate the effect of compatibilizer on product properties, maleic anhydride grafted polypropylene (MAPP) was added at 5% by mass in the formulations. After extrusion of composites formulations, they were formed using compression molding. Results indicated that using flax fiber in composites without pretreatment and compatibilizer could result into products with inferior physical and mechanical properties; this could be compensated by the use of a compatibilizer. However, the use of compatibilizer had some negative effects on some other physical properties like color and melt flow index (MFI).     

Development of Bioactive Packaging Structure Using Melt Electrospinning

Recent research attention is shifting towards the use of bioactive antimicrobial and/or antioxidant packaging materials and their fabrication with non-toxic techniques. The process of melt electrospinning produce fibers from polymer melt without any solution hence environmentally friendly because use of toxic solvents can be avoided. The objectives of this study were fabrication of biodegradable polymeric microfibrous structure using melt electrospinning and characterization of the effect of plant based natural extract on fabricated structure. We found that incorporation of this structure with natural extract provide sufficient support for bioactive compounds without changing thermal stability, physical properties and amorphous phase and also increase the antimicrobial efficacy. Moreover, homogeneously dispersion and good interaction of polymer and natural plant based extract demonstrating the potential of such polymer blend as a bioactive antimicrobial material for packaging industry including especially food and healthcare.     

Determination of In Situ Esterification Parameters of Citric Acid-Glycerol Based Polymers for Wood Impregnation

The development of wood treatments is of increasing industrial importance. A novel technique for improving the properties of lodgepole pine and white pine through modification of the microstructure is described. The present investigation is devoted to the synthesis and determination of in situ parameters of citric acid and glycerol based polymers for wood impregnation. This solvent free approach is environmentally friendly and achieved through an esterification condensation reaction under acidic conditions. Crude glycerol and citric acid reactants were cross-linked via a curing process at 160?°C creating a polymer with only water as the byproduct. The ester bonds and crosslinking levels were controlled using different catalysts and citric acid contents and related to the reaction time and temperature. The nature of bonding within the polymers and at the wood cell walls was determined by FT-IR analysis. The thermal properties such as glass transition temperature (T_g) were studied using TGA/DSC and the effect of citric acid content and catalyst type determined. Dimensional stability of impregnated wood samples improved above 50% for each sample with HCl and p-TSA catalysts compared to control samples. FTIR spectra were studied to show the presence of the ester linkages of the polymer in situ at the wood cell walls. Bonding between the polymer and wood macromolecules were observed by scanning electron microscopy and interpreted as evidence of chemical bonds at the wood cells. When prepared using a catalyst, the polymer was intimately incorporated into wood structure significantly improving the substrate dimensional stability. Enhanced stability makes this approach of particular interest for exterior wood products especially as a green renewable option for the wood industry.     

Using Chitosan as a Coagulant in Recovery of Organic Matters from the Mash and Lauter Wastewater of Brewery

Chitosan is a natural biopolymer which can be used to replace aluminum salts and chemical polymers as a coagulant to avoid the human health problems caused by the residual of aluminum and chemical polymers in water. Chitin is a major component in shrimp and crab shells, and chitosan can be produced from chitin via a deacetylated process. Since the biodegradation of chitin is very slow, large amount of discards from the processing of crustaceans has become a major concern in seafood industry. Therefore, more works are need to find the possible applications of chitin, chitosan and their derivatives. This research used chitosan as a coagulant to recover wheat dregs in the wastewater from washing the mash and the lauter unit in a brewery, and regards this study as an example to understand the influences of the characters of the wastewater on the treatment plant of brewery. The result shows that the␣wastewater from the mash and the lauter units can have the best treatment efficiency at the coagulant dosage of 120 mg/L in the original pH 4.5. Increasing the solution pH decreased the turbidity removal efficiency. The dominant mechanisms for chitosan to remove colloids in the␣wastewater are charge bridging and neutralization, and the later becomes less significant in␣the high pH. The coagulant of chitosan removed most of the colloidal form organic matter in the wastewater, but it has only little effect on the removal of dissolving organic matter. Chitosan is a natural material, after coagulation the sludge from the mash and lauter wastewater can serve directly as an animal husbandry fodder after been dehydrated. Therefore, the loading to wastewater treatment plant and the cost of treatment could be reduced.     

Valorization of fish by-products: rheological,textural and microstructural properties of mackerel skin gelatins

The fish processing industry generates significant amounts of waste which is usually discarded. The present study investigated the recovery of gelatins from Atlantic mackerel (Scomber scombrus) skins after pre-treatment with different environmentally friendly organic acids (acetic, citric, lactic, tartaric or malic acid). The chemical composition, the rheological and the textural properties as well as the microstructural characteristics of the extracted gelatins were analysed and compared to commercial bovine hide gelatin. Although the organic acid used in the pre-treatment step did not affect the extraction yield and the chemical composition of the prepared gelatins, differences were observed in terms of rheology and texture. The highest gel strength (P < 0.05) was observed with gelatins extracted after pre-treatment with acetic, citric and malic acids (71–80 g). From an industrial point of view, gelatin can be extracted using any of these organic acids with similar yield. However, in order to obtain better rheological and textural properties the use of acetic, citric or malic acid in the pre-treatment step is recommended.     

Removal of substituted phenols onto iron‐treated Nostoc sp. biomass

This study explored the possibility of removing 4‐nitrophenol (4‐NP) and 2,4‐dichlorophenol (2,4‐DCP) from water by using a dead blue‐green algae, Nostoc sp., dried and untreated and dried and treated with iron (Fe‐treated with 0.1 M ferric chloride solution for 1 day). The Nostoc sp. untreated and Fe‐treated biomass were used to study the sorption and desorption of 4‐NP and 2,4‐DCP. The effects of solute concentration, ionic strength, and temperature on sorption and desorption in the presence of untreated and treated Nostoc sp. biomass were investigated. The Fe‐treated Nostoc sp. biomass sorbed higher amounts of both 4‐NP and 2,4‐DCP than the untreated biomass. The percent cumulative desorption decreased from 6.41% to 0.28% and 1.84% to 0.19%, respectively, for 4‐NP and 2,4‐DCP for the Fe‐treated biomass. Biosorption of 4‐NP and 2,4‐DCP onto untreated and Fe‐treated Nostoc sp. biomass conformed to Freundlich isotherms. Iron treatment of Nostoc sp. biomass increased the value of ln K from 8.07 to 8.59 for 4‐NP and from 8.04 to 8.51 for 2,4‐DCP but decreased their desorption. An increase in ionic strength (0.003–0.03) increased the biosorption of both substituted phenols and decreased their percent desorption. An increase in temperature in the range of 15–35°C decreased the sorption of 4‐NP and 2,4‐DCP onto both untreated and Fe‐treated Nostoc sp. biomass and increased their desorption, indicating that the biosorption of both substituted phenols onto untreated and Fe‐treated Nostoc sp. biomass was principally a physical process. The results of this study suggest that Fe‐treated dried Nostoc sp. biomass could be explored as an inexpensive and eco‐friendly material for the effective removal of these phenols and, potentially, other chemicals from industrial wastewater and contaminated groundwater.     

A Comparative Study on the Mechanical and Physical Properties of Plywood Panels Prepared by Chitosan as Bio-Adhesive

Journal of Polymers and the Environment - This study aims to make environment-friendly plywood panels acceptable in terms of both mechanical and physical properties using chitosan as a natural...     

High-Efficiency Production of Bioplastics from Biodegradable Organic Solids

Microbial polyhydroxyalkanoates (PHAs) have been extensively studied as environmentally friendly biodegradable thermoplastics. The major obstacle to wide acceptance of PHAs is their high price, mainly attributed to the costs of raw materials and polymer recovery. A large amount of organic solids are discarded from food production and consumption and may be used as carbonaceous raw materials for production of PHAs. A novel technology was investigated at bench-top scale to produce PHAs from food scraps. The harvested cell mass had a high PHA content (72.6% of dry cell mass), the same as obtained from pure glucose and organic acids. The organic solid was first digested in an acidogenic reactor in which about 60% solid was converted to fermentative products, including short-chain fatty acids. The four major acids were acetic, propionic, butyric, and lactic acids at concentrations of 6, 2, 27, and 33 g/L, respectively. The acids were transported through a membrane barrier via molecular diffusion to an airlift bioreactor, where the acids were utilized by an enriched culture of Ralstonia eutropha for PHA synthesis. Purification of fermentative acids was not performed in this molecular diffusion–based integration of acidogenesis and polymerization. By using a dialysis membrane as the barrier, the dry cell mass concentration and PHA content reached 22.7 g/L and 72.6%, respectively. The PHA was a copolymer of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) with 2.8 mole % of hydroxyvalerate.     

Ionic Liquids as Environmentally Friendly Solvents in Macromolecules Chemistry and Technology,Part I

With the increasing emphasis on the environment and the need to find environmentally friendly solvent systems, ionic liquids (IL)s have been emerging as promising green solvents to replace conventional solvents in recent years. They possess unique properties such as nonvolatility, low toxicity, ease of handling, nonflammability and high ionic conductivity; thus they have received much attention as green media for various chemistry processes. This report provides an extensive overview of use of ILs in polymers chemistry and technology.     

Ionic Liquids as Environmentally Friendly Solvents in Macromolecules Chemistry and Technology,Part II

With the increasing emphasis on the environment and the need to find environmentally friendly solvent systems, ionic liquids (IL)s have been emerging as promising green solvents to replace conventional solvents in recent years. They possess unique properties such as nonvolatility, low toxicity, ease of handling, nonflammability and high ionic coductivity; thus they have received much attention as green media for various chemistry processes. This report provides an extensive overview of use of ILs in polymers chemistry and technology.     

Utilization of Porous Carbons Derived from Coconut Shell and Wood in Natural Rubber

The porous carbons derived from cellulose are renewable and environmentally friendly. Coconut shell and wood derived porous carbons were characterized with elemental analysis, ash content, X-ray diffraction, infrared absorbance, particle size, surface area, and pore volume. The results were compared with carbon black. Uniaxial deformation of natural rubber (NR) composites indicate the composites reinforced with the porous carbon from coconut shell have higher tensile moduli at the same elongation ratio than the composites reinforced with wood carbon. 40 % coconut shell composite showed a fivefold increase in tensile modulus compared to NR. Polymer–filler interactions were studied with frequency dependent shear modulus, swelling experiments and dynamic strain sweep experiments. Both linear and non-linear viscoelastic properties indicate the polymer–filler interactions are similar between coconut shell carbon and wood carbon reinforced composites. The swelling experiments, however, showed that the polymer–filler interaction is greater in the composites reinforced with coconut shell instead of wood carbon.     

Use of Chitosan as Coagulant to Treat Wastewater from Milk Processing Plant

Chitosan is a natural high molecular polymer made from crab, shrimp and lobster shells. When used as coagulant in water treatment, not like aluminum and synthetic polymers, chitosan has no harmful effect on human health, and the disposal of waste from seafood processing industry can also be solved. In this study the wastewater from the system of cleaning in place (CIP) containing high content of fat and protein was coagulated using chitosan, and the fat and the protein can be recycled. Chitosan is a natural material, the sludge cake from the coagulation after dehydrated could be used directly as feed supplement, therefore not only saving the spent on waste disposal but also recycling useful material. The result shows that the optimal result was reached under the condition of pH 7 with the coagulant dosage of 25 mg/l. The analysis of cost-effective shows that no extra cost to use chitosan as coagulant in the wastewater treatment, and it is an expanded application for chitosan.