The Beginning of Survival

The majority of coal ash generated by electric utilities and power plants of industrial manufacturers is disposed of in landfills; the remainder is used primarily as admixtures in construction materials. Predictive computer models used to assess the environmental impact of disposal or utilization need quantitative information on ash composition and mineralogy. Typically, compositions are reported as elemental concentrations, but this data does not indicate the mineral or glass (amorphous) phases in which the elements are contained. Such phases affect the leaching mechanisms and rates. X-ray diffraction and scanning electron microscopy combined with energy dispersive X-ray spectrometry, common methods for qualitative mineral identification and particle characterization, were used to quantify coal ash mineral compositions. Samples of industrial coal ash from a stoker boiler and a fluidized bed combustion (FBC) system were analyzed and the results were compared to those for a standard sample of coal ash from the National Institute of Standards and Testing (NIST1633a). The results show that the stoker-boiler ash is similar in composition to the NIST sample. Mullite (AI₆Si₂O₁₃) dominates the composition of the crystalline fraction and silica (SiO₂,) dominates the composition of the amorphous fraction. The FBC ash contains the same minerals, but with large proportions of calcium-based phases: anhydrite (CaSO₄), lime (CaO), calcite (CaCO₃), and portlandite (Ga(OH)₂).     

Characterization and risk assessment of polychlorinated biphenyls in soils and vegetations near an electronic waste recycling site, South China

This study aimed at identifying the levels of PCBs generated from e-waste recycling, and their potential impacts on the soils and vegetations as well. The ΣPCBs concentrations in soil and plant samples ranged from 7.4 to 4000 ng g(-1) and from 6.7 to 1500 ng g(-1), respectively. For the plant samples, Chrysanthemum coronarium L. from vegetable field and the wild plant Bidens pilosa L. from the burning site showed relatively higher PCB concentrations than other species. For the soil samples, the e-waste burning site had relatively higher PCB concentrations than the adjacent areas, and vegetable soils had higher PCB concentrations than paddy soils. The PCB concentrations showed a clear decreasing trend with the increasing distance from the e-waste recycling site. PCB 28, 99, 101, 138, 153, and 180 were the predominant congeners. Principal component analysis results showed a potential fractionation of PCB compositions from the burning site to the surroundings. The PCB congener pattern at the burning site was similar to Arochlor 1260, pointing to an input of non-domestic e-waste. Similar PCB congeners were found in soils and related vegetables, indicating they derived from the same source. The consumption of vegetables grown in soils near e-waste recycling sites should be strictly avoided due to the high PCBs in the plant tissues.     

Inter-Urban Comparison of Ambient Volatile Organic Compound Concentrations in U.S. Cities

Airborne particulate matter from three ferrous foundries was sampled in granulometric fractions and analyzed by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDXA), X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) to determine morphology and qualitative bulk and surface chemical compositions. Cluster and principal components analyses (PCA) were used as an aid for interpretation of results. A clear pattern of composition as a function of size emerges; in particular, trace metals accumulate in fine particles and volatile species on the surface of these. Chemical composition changes are also related to daily schedules where applicable: trace metals appear during pouring operations, silicon is generated during mold making and unmolding. Cluster and PCA greatly ease examination of data and offer pictorial representations of results; in particular, the chemical composition versus particle size relationship is very neatly illustrated by PCA graphs.     

Occurrence of polybrominated diphenylethers, polychlorinated dibenzo-p-dioxins, dibenzofurans and biphenyls in coastal sediments from Spain

Fifteen sediment samples were analysed in order to determine their content of polybrominated diphenylethers (PBDEs), polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs). Samples were collected from several hot spots on the Spanish coast, such as the harbours of Almeria and Tarragona, and the mouths of the Besos and Llobregat rivers in Barcelona. A generic analytical procedure based on Soxhlet extraction followed by an automated cleanup system and gas chromatography-ion trap-mass spectrometry was employed for determining the toxic congeners of PCDDs and PCDFs, as well as dioxin-like PCBs. As regards PBDE determinations, a rapid method based on the use of selective pressurized liquid extraction followed by gas chromatography-negative ion chemical ionization-mass spectrometry was applied. Total toxicity equivalent (WHO-TEQ) values were calculated using the toxicity equivalent factors proposed by WHO for dioxin-like PCBs, PCDDs and PCDFs. WHO-TEQ values ranged from 0.3 to 75 pg/g dry weight (dw), with PCB contribution on the toxicity of the samples between 1 and 84%. Total PBDE levels ranged from 2.7 to 134 ng/g dw, with BDE-209 contribution on the total PBDE contamination between 50 and 99%.     

Exposure to PCBs, through inhalation, dermal contact and dust ingestion at Taizhou, China--a major site for recycling transformers

Air samples containing gaseous and particulate phases were collected from e-waste workplaces and residential areas of an intensive e-waste recycling area and compared with a reference site. The highest total concentration of PCBs was detected at transformer recycling workshops (17.6 ng m(-3)), followed by the residential area (3.37 ng m(-3)) at Taizhou, and the lowest was obtained at the residential area of the reference site, Lin'an (0.46 ng m(-3)). The same trend was also observed with regards to PCB levels in dust samples. The highest average PCBs level of 2824 ng g(-1) (dry wt) was found in the transformer recycling workshops, and was significantly higher than that of residential areas of Taizhou (572 ng g(-1) dry wt) and Lin'an (42.4 ng g(-1) dry wt). WHO-PCB-TEQ level in the workshops of Taizhou was 2216 pg TEQ(1998)g(-1) dry wt or 2159 pg TEQ(2005)g(-1) dry wt, due to the high abundance of PCB 126 (21.5 ng g(-1) dry wt), which contributed 97% or 99% of WHO-PCB-TEQs. The estimated intake of PCBs via dust ingestion and dermal absorption by transformer recycling workers were 77.5×10(-5) and 36.0×10(-5) pg WHO-PCB-TEQ(1998)kg(-1)d(-1), and 67.3×10(-5) and 31.3×10(-5) pg WHO-PCB-TEQ(2005)kg(-1)d(-1), respectively.     

Air-sea gas exchange of HCHs and PCBs and enantiomers of alpha-HCH in the Kattegat Sea region

Concentrations and air-water gas exchange of polychlorinated biphenyls (PCBs) and hexachlorocyclohexanes (HCHs) were determined in nine paired air and water samples. The samples were collected monthly in the Kattegat Sea between December 1998 and November 1999. Average fugacity and flux values indicated that PCBs were oversaturated in the water, while HCHs were net deposited. Variations were large over the year, especially during spring and summer. Air parcel back trajectories suggested that air concentrations over the Kattegat Sea are largely dependent of air mass origin. Seasonal trends were detected for airborne HCHs and for PCBs in water. The air and water enantiomeric compositions of alpha-HCH indicated that a larger portion of alpha-HCH in air originated from the underlying water during summer than during winter.     

A cheap protocol for colour measure and for diagnostic in planning a cultural heritage restoration. Case study: main façade of Palazzo Governi (Cagliari,Sardinia, Italy)

Due to the bad state of conservation, “Palazzo Governi”, a seventeenth-century building located in the old town district of “Stampace” in Cagliari (Sardinia, Italy), was subjected to restoration. Thus, according to the Italian Law n. 1089, the main façade colour must be reproduced, and therefore, its identification was required. The available samples looked fairly degraded, in particular as an easy plaster to crumble; so, some other analyses able to identify the degradation cause were performed. Two different approaches were adopted to attain the first goal, the visual colour assessment by a sensory panel (subjective) and the instrumental measurement by colorimetry (objective). Ion chromatography and inductively coupled plasma–optical emission spectroscopy analyses, as well as conductivity and pH measurements, were performed to evaluate the presence of water-soluble salts inside the plaster, as possible cause of degradation; the binder/aggregate ratio was also evaluated. A full mineralogical and petrographic characterisation of the materials constituting the samples, as well as the identification of their stratigraphy and some other morphologic and structural features suitable to highlight eventual forms of degradation, were performed by optical microscopy. Scanning electron microscopy coupled to X-ray microanalysis was been also used in order to confirm and/or to integrate data obtained by optical microscopy. The samples have been compared with two samples coming from two other buildings, also located in Sardinia, that looked in good conservation state. The results evidenced that the causes of degradation come from a high salt (especially sulphate) content and a scarce presence of binder in the plaster that can be imputed to a wrong initial composition and/ or to a leaching by acidic rain.     

Internally mixed sea salt, soot, and sulfates at Macao, a coastal city in South China

Direct observation of the mixing state of aerosol particles in a coastal urban city is critical to understand atmospheric processing and hygroscopic growth in humid air. Morphology, composition, and mixing state of individual aerosol particles from Macao, located south of the Pearl River Delta (PRD) and 100 km west of Hong Kong, were investigated using scanning electron microscopy (SEM) and transmission electron microscopy coupled with energy-dispersive X-ray spectrometry (TEM/EDX). SEM images show that soot and roughly spherical particles are prevalent in the samples. Based on the compositions of individual aerosol particles, aerosol particles with roughly spherical shape are classified into coarse Na-rich and fine S-rich particles. TEM/EDX indicates that each Na-rich particle consists of a Na-S core and NaNO3 shell. Even in the absence of heavy pollution, the marine sea salt particles were completely depleted in chloride, and Na-related sulfates and nitrates were enriched in Macao air. The reason could be that SO2 from the polluted PRD and ships in the South China Sea and NO2 from vehicles in the city sped up the chlorine depletion in sea salt through heterogeneous reactions. Fresh soot particles from vehicular emissions mainly occur near curbside. However, there are many aged soot particles in the sampling site surrounded by main roads 200 to 400 m away, suggesting that the fresh soot likely underwent a quick aging. Overall, secondary nitrates and sulfates internally mixed with soot and sea salt particles can totally change their surface hygroscopicity in coastal cities.     

Polychlorinated biphenyls in sediments of the Tam Giang-Cau Hai Lagoon, Central Vietnam

The Tam Giang-Cau Hai Lagoon, the largest in south east Asia, suffers from a great anthropogenic pressure and appears subject to a process of progressive environmental deterioration. To establish causes, history and trends of lagoon contamination, sediment samples representing three major parts of the systems were sampled and analysed for porosity, organic carbon, total nitrogen, delta(13)C, grain size, radiotracers and PCBs. PCB surficial concentrations range from 10.2 to 24.5 microg kg(-1), and maximum values are close to NOAA ERL guidelines. The downcore distribution of PCBs shows two well defined peaks in the core from Tam Giang (25.5 and 16.2 microg kg(-1)), whereas the sediment from Cau Hai is characterised by a maximum at the surface. Therefore, present trends indicate that contamination is still increasing or slightly decreasing. The prevailing congeners are 3-CB and 4-CB, hence recent PCBs appear to be mostly originated by Aroclor 1016- and 1242-like mixtures, with some samples influenced also by Aroclor 1248. Present sources seem to be similar everywhere and probably they are widespread all over the territory of the Thua Thien-Hue province.     

Occurrence of PCBs, PCDD/Fs, PBDEs and DDTs in Spanish breast milk: enantiomeric fraction of chiral PCBs

Concentrations and congener specific profile of DDTs, PCBs and PCDD/Fs have been determined in a number of Spanish breast milk samples. The concentrations found indicate a decreasing tendency compared to previous data from the 1990s. Mean concentrations of 238 ng/g fat weight, 111 ng/g fat weight and 82.1 pg/g fat weight were found for DDTs, PCBs and 2,3,7,8-PCDD/Fs, respectively. When the WHO-TEQs were calculated, PCDD/Fs was the family contributing with the highest percentage to the total (62-84%), followed by the non-ortho PCBs (10-25%) and the mono-ortho PCBs (5-24%). The congener specific accumulation patterns found were comparable to those reported in other studies in industrialised countries. In addition, the levels of 9 PBDEs congeners have been also determined in the breast milk samples. The concentrations ranged from 0.04 to 1.38 ng/g fat weight. The enantiomeric enrichment of a number of chiral PCBs in the breast milk samples, including congeners 84, 91, 95, 132, 135, 149, 171, 174, 176 and 183, has also been studied, for some of them for the first time in this matrix.     

Investigating activated sludge flocs using microanalytical techniques: demonstration of environmental scanning electron microscopy and time-of-flight secondary ion mass spectrometry for wastewater applications.

Environmental scanning electron microscopy (ESEM) with an energy-dispersive X-ray spectrometer (EDS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were demonstrated to be useful analytical tools for investigating surface and bulk components of individual floc particles from both full- and bench-scale activated sludge systems. Detailed surface imaging of various hydrated biological floc particles by ESEM revealed substantial differences in surface features between treatment systems, while EDS identified spatial differences in the iron and the aluminum distributions. The ToF-SIMS spectra had signature fragments of protein and polysaccharide material from the floc surface, suggesting that this technique is capable of surface profiling extracellular polymeric substances. Principal-component analysis of the positive ion ToF-SIMS spectra from the mixed-liquor-suspended solid (MLSS) samples and reference aquatic organic materials found slight differences between the full- and bench-scale MLSS surface properties but substantial differences among MLSS and treated effluent from the same facility.     

Determination of PCBs, PCDDs and PCDFs in insulating oil samples from stored Chinese electrical capacitors by HRGC/HRMS

Homologue and congener profiles of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in commercial PCBs formulations are key information for the source identification of PCBs contamination as well as for the risk assessment caused by potential exposure. The isotope dilution technology in combination with high resolution gas chromatography-high resolution mass spectrometry (HRGC/HRMS) has made the accurate determination of such profiles possible. So far, various commercial PCB formulations except Chinese products have been successfully determined. Two PCBs containing insulating oil samples from stored Chinese electrical capacitors have been determined with the same methodology for comparability. The total concentration PCBs in two oil samples were 790 000 μg g⁻¹ and 720 000 μg g⁻¹, respectively. TriCBs, TetraCBs, and DiCBs were found to be most abundant. Concentration of dioxins contamination in two samples is 650-670 ngTEQ g⁻¹, of which 69-71 ngTEQ g⁻¹ from PCDD/Fs with the predominant congeners of 1,2,7,8-TeCDF; 2,3,7,8-TeCDF; 2,3,4,7,8-PeCDF and 1,2,3,7,8-PeCDF. The contributions of DL-PCBs in total TEQ in both samples were more than 85%. The dioxin-like toxicity in insulating oils contained in electrical capacitors could be considered receive attention as an important dioxins source if such wastes are not managed in an environmentally sound manner.     

Residues of organochlorine pesticides and PCBs in some Brazilian municipal solid waste compost

Persistent organic pollutants (POPs), organochlorine pesticides and polychlorinated biphenyls (PCBs), listed as per the Stockholm Convention (alpha -HCH, beta -HCH, gamma -HCH, p,p'-DDT, o,p'-DDT, p,p'-DDD, p,p'-DDE, aldrin, endrin, dieldrin, PCBs 28, 52, 118, 138, 153, and 180), were analyzed in municipal solid waste (MSW) compost samples from three different Brazilian composting plants located in three S?o Paulo State cities: Araras, Araraquara and S?o Paulo (Vila Leopoldinha). Quantitative and qualitative analyses were carried out using gas chromatography electron capture detection (GC-ECD) and gas chromatography mass spectrometry (GC-MS) (Ion Trap, electron impact ionization), respectively. The samples were analyzed in triplicate and the target POPs were not detected by GC-ECD. Twelve pollutants were identified in two samples when qualitative analysis (GC-MS) was used (beta -HCH, gamma -HCH, p,p'-DDT, o,p'-DDT, p,p'-DDD, and p,p'-DDE, PCBs 28, 118, 138, 153 and 180). The composting process has advantages such as urban solid waste reduction and landfill life-span increase, however the MSW compost quality, which can be utilized for agricultural purposes, should be evaluated and be controlled. This kind of study is the first step in making available information to answer questions regarding MSW compost for sustainable agricultural use, such as the pollutants accumulation in soil and in groundwater, and plants uptake.     

Study on PCBs,PCDD/Fs,organochlorine pesticides,heavy metals and arsenic content in freshwater fish species from the River Turia (Spain)

In this study samples of common trout, European eel and barbel have been analysed for the levels of heavy metals such as lead (Pb), cadmium (Cd), zinc (Zn), copper (Cu), and the metalloid arsenic (As). Polychlorinated biphenyls (PCBs), including three non-ortho substituted PCBs, 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and DDT and its two main metabolites were also analysed in some selected samples, in order to evaluate the extent of contamination of the River Turia basin. All samples presented detectable levels of the elements analysed, presenting zinc the highest concentrations. European eel was the species found to highly accumulate these contaminants. Regarding organochlorinated compounds, seven samples exhibited detectable levels of the most toxic PCDD/Fs congener, the 2,3,7,8-TCDD. Non-ortho PCBs were not detected or not quantified in almost all samples and the sum of the individual PCB congeners determined were low compared to other aquatic ecosystems with similar fish species.     

Spatial distribution of organochlorine contaminants in soil, sediment, and fish in Bikini and Enewetak Atolls of the Marshall Islands, Pacific Ocean

Several nuclear tests were performed at Enewetak and Bikini Atolls in the Marshall Islands between 1946 and 1958. The events at Bikini Atoll involved several ships that were tested for durability during nuclear explosions, and 24 vessels now rest on the bottom of the Bikini lagoon. Nine soil samples were collected from different areas on the two islands of the atoll, and eighteen sediment, nine fish, and one lobster were collected in the vicinity of the sunken ships. Organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polychlorinated terphenyls (PCTs) in these samples were analyzed using gas chromatography/ion trap mass spectrometry (GC/ITMS). The average recoveries ranged from 78% to 104% for the different PCB congeners. The limits of detection (LOD) for PCBs, PCTs, DDE, DDT, and dieldrin ranged 10-50 pg g⁻¹. Some fish from Enewetak contained PCBs at a concentration range of 37-137 ng g⁻¹, dry weight (dw), and most of the soils from Enewetak showed evidence of PCBs (22-392 ng g⁻¹ dw). Most of the Bikini lagoon sediment samples contained PCBs, and the highest was the one collected from around the Saratoga, an aircraft carrier (1555 ng g⁻¹ dw). Some of the fish samples, most of the soil samples, and only one of the sediment samples contained 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene (DDE) and PCBs. In addition to PCBs, the soils from Enewetak Atoll contained PCTs. PCTs were not detected in the sediment samples from Bikini Atoll. The results suggest local pollution sources of PCBs, PCTs, and OCPs.     

Agricultural reuse of reclaimed water and uptake of organic compounds: pilot study at Mutah University wastewater treatment plant, Jordan

The residues of polynuclear aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), chlorinated benzenes (CBs) and phenols were investigated for soil, wastewater, groundwater and plants. The uptake concentration of these compounds was comparatively determined using various plant types: Zea mays L., Helianthus annus L., Capsicum annum L., Abelmoschus esculentus L., Solanum melongena L. and Lycopersicon esculentum L. which were grown in a pilot site established at Mutah University wastewater treatment plant, Jordan. Soil, wastewater, groundwater and various plant parts (roots, leaves and fruits) samples were extracted in duplicate, cleaned up by open-column chromatography and analyzed by a multi-residue analytical methods using gas chromatography equipped with either mass selective detector (GC/MS), electron capture detector (GC/ECD), or flame ionization detector (FID). Environmentally relevant concentrations of targeted compounds were detected for wastewater much higher than for groundwater. The overall distribution profiles of PAHs and PCBs appeared similar for groundwater and wastewater indicating common potential pollution sources. The concentrations of PAHs, PCBs and phenols for different soils ranged from 169.34 to 673.20 microg kg(-1), 0.04 to 73.86 microg kg(-1) and 73.83 to 8724.42 microg kg(-1), respectively. However, much lower concentrations were detected for reference soil. CBs were detected in very low concentrations. Furthermore, it was found that different plants have different uptake and translocation behavior. As a consequence, there are some difficulties in evaluating the translocation of PAHs, CBs, PCBs and phenols from soil-roots-plant system. The uptake concentrations of various compounds from soil, in which plants grown, were dependent on plant variety and plant part, and they showed different uptake concentrations. Among the different plant parts, roots were found to be the most contaminated and fruits the least contaminated.     

Determination of polychlorobiphenyls in Venice Lagoon sediments

Polychlorinated biphenyl (PCBs) congeners were measured in 14 sediment samples collected at five sites in the Venice Lagoon selected on the basis of a supposed diversity of inputs and of pollution levels. The PCBs were determined after a sonication assisted extraction by gas chromatography mass spectrometry (GCMS). The sum of the congener concentrations determined in the samples range from 4.05 to 239.15 ng/g on a dry weight basis. The concentration values are very variable both comparing the sites and comparing different samples from the same site and can be connected to the sand percentage in the sediment samples. The correlation matrix obtained from data matrix using the congener concentrations as variables shows high values, mostly between 0.964 and 1, suggesting that the pattern of the PCB congeners and the ratios among the concentrations in Venice Lagoon sediments are more or less constant; the samples differ only in the concentration level.     

Relationship between carbonaceous materials and polychlorinated biphenyls (PCBs) in the sediments of the Danshui River and adjacent coastal areas, Taiwan

Persistent organic pollutants, POPs (e.g., polychlorinated biphenyls) can seriously and deleteriously affect environmental quality and human health. These organic pollutants are exhibiting high affinities to solid phases and thus, quickly end up in sediments. To better understand the role of carbonaceous materials in the transport and distributions of POPs in terrestrial and near-shore environments, concentrations of PCBs and carbonaceous materials (including total organic carbon, black carbon and total carbohydrates), were determined in surface sediments of the Danshui River and nearby coastal areas, Taiwan. Total concentrations of PCBs in the sediments ranged from non-detectable to 83.9 ngg(-1), dry weight, with the maximum value detected near the discharge point of the marine outfall from the Pali Sewage Treatment Plant. These results suggest that the sewage treatment plant has discharged PCBs in the past and the concentrations are still high due to their persistence; alternatively, PCBs are still being discharged in the estuarine and near-shore environment of the Danshui River. Organic carbon and black carbon concentrations correlated well with those of total PCBs in the sediments, suggesting that both organic carbon and black carbon significantly affect the distribution of trace organic pollutants through either post-depositional adsorption, or by co-transport of similar source materials. The field results demonstrate that black carbon and plays an important role in the general distribution of PCBs, while concentrations of some specific PCBs are affected by both black carbon and organic carbon concentrations.     

Concentrations of dioxin-like PCB congeners in unweathered Aroclors by HRGC/HRMS using EPA Method 1668A

We have determined the congener compositions of nine commercial Aroclor products of polychlorinated biphenyls (PCBs) to the sub-part-per-million level using high-resolution gas chromatography combined with high-resolution mass spectrometry according to US Environmental Protection Agency (EPA) Method 1668A. These Aroclor composition data should allow improved characterization and risk assessment of PCB contamination at hazardous waste sites, particularly for dioxin-like PCB congeners. By combining the data on the concentrations of each dioxin-like congener with its World Health Organization toxicity equivalency factor, we have established dioxin toxic equivalent concentrations for each pure Aroclor product.