Modelling atmospheric bulk deposition of Pb,Zn and Cd near a former Pb–Zn mine in West Greenland using transplanted Flavocetraria nivalis lichens

Atmospheric deposition of lead (Pb), zinc (Zn) and cadmium (Cd) was investigated near the former Black Angel Pb–Zn mine in Maarmorilik, West Greenland during 2010–2011. Thalli of the lichen Flavocetraria nivalis were transplanted from an uncontaminated site into sites near the mine and collected the following year. At 20 of the total 21 sites, concentrations of Pb, Zn and Cd were significantly elevated in lichens after 1 year of transplantation compared to initial concentrations. Elevated concentrations were observed within a distance of approx. 20 km from the mining area. Concentrations decreased with increasing distance from the mine and the relation was well described using a power function with a negative exponent (r² = 0.90; 0.83 and 0.83 for Pb; Zn and Cd). To examine the relation between metal concentrations/uptake in lichen transplants and atmospheric bulk deposition, 10 Bergerhoff dust samplers were placed near lichen transplants and samplers and lichens were collected after a 7-weeks exposure period. A significant linear correlation was observed between metal concentrations in lichen transplants and atmospheric bulk metal deposition (r² = 0.94; 0.88 and 0.89 for Pb; Zn and Cd). Combining the results and including an area distribution within a defined metal deposition area, the “annual” deposition of Pb, Zn and Cd as dust was estimated during the 2010–2011 snow-free period (～5 months). The results reveal that 20 years after mine closure, 770 kg Pb, 3700 kg Zn and 24 kg Cd were still being deposited as dust per year (snow-free period only) within a distance of 20 km from the mine.     

Heavy metal distribution in dust from elementary schools in Hermosillo,Sonora, México

The city of Hermosillo, Sonora in northern Mexico was investigated for its heavy metals content. Samples of sedimented dust in roofs from 25 elementary schools were analyzed for their contents of Ni, Cr, Zn, Cd, Co, Ba, V, Pb, Fe and Cu after digestion with nitric acid. The results of the analysis were used to determine spatial distribution and magnitude of heavy metals pollution. The results of this study reveal that heavy metals distribution is different in two areas of the city. The southern area contains higher concentrations of heavy metals than the northcentral area. The mean level of Cd in exterior dust is 5.65 mg kg⁻¹ in the southern area whereas the mean level of Cd is 2.83 mg kg⁻¹ in the northcentral area. Elevated concentrations of Zn (2012 mg kg⁻¹), Pb (101.88 mg kg⁻¹), Cr (38.13 mg kg⁻¹) and Cd (28.38 mg kg⁻¹) in roof dust were found in samples located near industrial areas. Principal component analysis (PCA) was applied to the data matrix to evaluate the analytical results and to identify the possible pollution sources of metals. PCA shows two main sources: (1) Pb, Cd, Cr and Zn are mainly derived from industrial sources, combined with traffic sources; (2) Fe, Co and Ba are mainly derived from natural sources. V and Ni are highly correlated and possibly related to fuel combustion processes. Enrichment factors were calculated, which in turn further confirms the source identification. Ba and Co are dominantly crustal. Anthropogenically added Cd, Pb, Zn and Cr show maximum enrichment relative to the upper continental crustal component. The distribution of the heavy metals in dust does not seem to be controlled only by the topography of the city, but also by the location of the emission sources.     

Lead,mercury, cadmium,chromium, nickel,copper, zinc,calcium, iron,manganese and chromium (VI) levels in Nigeria and United States of America cement dust

This study was aimed at investigating the relative abundance of heavy metals in cement dust from different cement dust factories in order to predict their possible roles in the severity of cement dust toxicity. The concentrations of total mercury (Hg), copper (Cu), chromium (Cr), cadmium (Cd), nickel (Ni), manganese (Mn), lead (Pb), iron (Fe) and chromium (VI) (Cr (VI)) levels in cement dust and clinker samples from Nigeria and cement dust sample from the United States of America (USA) were determined using graphite furnace atomic absorption (GFAAS), while Zn and Ca were measured by flame atomic absorption spectrophotometry (FAAS), and Cr (VI) by colorimetric method. Total Cu, Ni and Mn were significantly higher in cement dust sample from USA (p < 0.05), also, both total Cr and Cr (VI) were 5.4–26 folds higher in USA cement dust compared with Nigeria cement dust or clinker (p < 0.001). Total Cd was higher in both Nigeria cement dust and clinker (p < 0.05 and p < 0.001), respectively. Mercury was more in both Nigeria cement dust and clinker (p < 0.05), while Pb was only significantly higher in clinker from Nigeria (p < 0.001). These results show that cement dust contain mixture of metals that are known human carcinogens and also have been implicated in other debilitating health conditions. Additionally, it revealed that metal content concentrations are factory dependent. This study appears to indicate the need for additional human studies relating the toxicity of these metals and their health impacts on cement factory workers.     

Phytomanagement of strongly acidic,saline eutrophic wetlands polluted by mine wastes: The influence of liming and Sarcocornia fruticosa on metals mobility

The aim of this study was to assess the effectiveness of combining liming and vegetation for the phytomanagement of strongly acidic, saline eutrophic wetlands polluted by mine wastes. Simulated soil profiles were constructed and four treatments were assayed: without liming + without plant, without liming + with plant, with liming + without plant and with liming + with plant. The plant species was the halophyte Sarcocornia fruticosa. Three horizons were differentiated: A (never under water), C1 (alternating flooding–drying conditions) and C2 (always under water). The soluble Cd, Cu, Mn, Pb and Zn concentrations were measured regularly for 18 weeks and a sequential extraction procedure was applied at the end of the experiment. Liming was effective (between ～70% and ～100%) in reducing the soluble Zn, Cu and Pb. In contrast, soluble Mn and Cd increased with liming, especially in the treatment with liming + with plant, where the concentrations were 2-fold higher than in the non-limed treatments. The amendment increased the contents of Zn, Mn and Cd bound to potentially-mobilisable soil fractions at the expense of the most-environmentally-inert fractions. Hence, the combined use of liming and vegetation may increase the long-term environmental risk of metals solubilisation.     

Dry atmospheric inputs of trace metals at the Mediterranean coast of Israel (SE Mediterranean): sources and fluxes

This study presents the first detailed data on aerosol concentrations of trace metals (Cd, Pb, Cu, Zn, Cr, Mn, Fe and Al) at the SE Mediterranean coast of Israel, and assesses their sources and fluxes. Aerosol samples were collected at two sampling stations (Tel-Shikmona and Maagan Michael) along the coast between 1994 and 1997. Two broad categories of aerosol trace metal sources were defined; anthropogenic (Cd, Cu, Pb and Zn) and naturally derived elements (Al, Fe, Mn and Cr). The extent of the anthropogenic contribution was estimated by the degree of enrichment of these elements compared to the average crustal composition (EF_crust). High values (median >100) were calculated for Cd, Pb and Zn, minor values for Cu and relatively low values (<10) for Fe, Mn and Cr. The crustal-derived elements exhibited a statistically significant seasonal pattern of higher concentrations during spring and autumn (e.g. Al concentrations in some cases during these periods were observed to be in excess of 1500 ng m⁻³). In the eastern Mediterranean basin crustal-dominated elements are enriched by 2–3 times while others (Cd and Pb) are comparable to the northwestern Mediterranean. The Pb : Cd ratios of ∼150 are higher than in coastal European sites (60–116) or emission materials (∼50). It is speculated that these differences are attributed mainly to the mixing of crustal material with local and European emissions. At present, it is impossible to quantify the latter two fractions. Back trajectory analysis and the subsequent categorization of two main aerosol populations, ‘European’ and ‘North Africa–Arabian’, exhibited a significantly different geochemical imprint on the aerosol chemical composition. ‘European’-derived air masses indicated significantly higher EF_crust values for Cd and Pb due to the greater anthropogenic character of the aerosol population, with a dilution by crustal material of this population leading to comparatively lower EF_crust values associated with the North African–Arabian air masses.     

Phytoremedial assessment of flora tolerant to heavy metals in the contaminated soils of an abandoned Pb mine in Central Portugal

Significant accumulation of heavy metals in soils and flora exists around the abandoned Barbadalhos Pb mine in Central Portugal. Soil and plant samples [49 species] were collected from two line transects, LT 1 and LT 2, in the mineralized and non-mineralized area, respectively to gain a comprehensive picture of heavy metals in soils and flora to assess its potential for phytoremediation. Phytosociological inventories of the vegetation were made using the Braun-Blanquet cover-abundance scale. Metal concentrations in soil ranged from (in mg kg^?1): 98–9330 [Pb], 110–517 [Zn], 7.1–50 [Co], 69–123 [Cr], 31–193 [Cu], 33 400–98 500 [Fe], 7.7–51 [Ni], 0.95–13 [Ag], 2.8–208 [As], and 71–2220 [Mn] along LT 1; and 24–93 [Pb], 30–162 [Zn], 3.7–34 [Co], 61–196 [Cr], 21–46 [Cu], 24 100–59 400 [Fe], 17–87 [Ni], 0.71–1.9 [Ag], 4.3–12 [As], and 44–1800 [Mn] along LT 2. Plant metal content ranged from (in mg kg^?1): 1.11–548 [Pb], 7.06–1020 [Zn], 0.08–2.09 [Co], 0.09–2.03 [Cr], 2.63–38.5 [Cu], 10.4–4450 [Fe], 0.38–8.9 [Ni], and 0.03–1.9 [Ag] along LT 1; and 0.94–11.58 [Pb], 2.83–96.5 [Zn], 0.12–1.44 [Co], 0.21–1.49 [Cr], 1.61–22.7 [Cu], 4.6–2050 [Fe], 0.51–4.81 [Ni], and 0.02–0.31 [Ag] along LT 2. Plants with highest uptake of metals were: Cistus salvifolius (548 mg Pb kg^?1), Digitalis purpurea (1017 mg Zn kg^?1 and 4450 mg Fe kg^?1). Mentha suavolens and Ruscus ulmifolius were seen to hyperaccumulate Ag (1.9 and 1 mg Ag kg^?1, respectively). More metals and higher concentrations were traced in plants from LT 1, especially for Pb and Zn.     

Seasonal patterns of heavy metal deposition to the snow on Lambert Glacier basin,East Antarctica

Al, V, Mn, Fe, Cu, As, Cd, Ba, Pb, Bi and U were determined in a continuous series of 46 snow samples from a 2.3-m snow pit, covering the time period from austral spring 1998 to summer 2002, at a site on the east side of the Lambert Glacier basin in East Antarctica. Concentrations are very low for all metals and differ by orders of magnitude from one metal to another, with the mean concentrations ranging from 0.028 pg g⁻¹ for Bi to 165 pg g⁻¹ for Al. It is estimated that anthropogenic contributions are dominant for Cu, Pb and probably As, in the snow in our study area while the natural contributions from rock and soil dust, sea-salt spray and volcanic emissions account for most of the measured concentrations of the other metals. Our snow profiles show pronounced seasonal variations for Mn, As, Ba, Pb and Bi throughout the year, but a very different situation is observed between different metals. These observations suggest that heavy metals determined in our samples are controlled by different transport and deposition mechanisms related to physical and chemical alterations in the properties and sources of aerosol.     

Effects of sewage sludge biochar on plant metal availability after application to a Mediterranean soil

Pyrolytic conversion of sewage sludge into biochar could be a sustainable management option for Mediterranean agricultural soils. The aim of this work is to evaluate the effects of biochar from sewage sludge pyrolysis on soil properties; heavy metals solubility and bioavailability in a Mediterranean agricultural soil and compared with those of raw sewage sludge. Biochar (B) was prepared by pyrolysis of selected sewage sludge (SL) at 500 °C. The pyrolysis process decreased the plant-available of Cu, Ni, Zn and Pb, the mobile forms of Cu, Ni, Zn, Cd and Pb and also the risk of leaching of Cu, Ni, Zn and Cd. A selected Mediterranean soil was amended with SL and B at two different rates in mass: 4% and 8%. The incubation experiment (200 d) was conducted in order to study carbon mineralization and trace metal solubility and bioavailability of these treatments. Both types of amendments increased soil respiration with respect to the control soil. The increase was lower in the case of B than when SL was directly added. Metals mobility was studied in soil after the incubation and it can be established that the risk of leaching of Cu, Ni and Zn were lower in the soil treated with biochar that in sewage sludge treatment. Biochar amended samples also reduced plant availability of Ni, Zn, Cd and Pb when compared to sewage sludge amended samples.     

Characterization of endophytic Rahnella sp. JN6 from Polygonum pubescens and its potential in promoting growth and Cd,Pb, Zn uptake by Brassica napus

Microbe-assisted phytoremediation has been considered as a promising measure for the remediation of heavy metal-polluted soils. In this study, a metal-tolerance and plant growth-promoting endophytic bacterium JN6 was firstly isolated from roots of Mn-hyperaccumulator Polygonum pubescens grown in metal-contaminated soil and identified as Rahnella sp. based on 16S rDNA gene sequence analysis. Strain JN6 showed very high Cd, Pb and Zn tolerance and effectively solubilized CdCO₃, PbCO₃ and Zn₃(PO₄)₂ in culture solution. The isolate produced plant growth-promoting substances such as indole-3-acetic acid, siderophore, 1-aminocyclopropane-1-carboxylic deaminase, and also solubilized inorganic phosphate. Based upon its ability in metal tolerance and solubilization, the isolate JN6 was further studied for its effects on the growth and accumulation of Cd, Pb and Zn in Brassica napus (rape) by pot experiments. Rape plants inoculated with the isolate JN6 had significantly higher dry weights, concentrations and uptake of Cd, Pb and Zn in both above-ground and root tissues than those without inoculation grown in soils amended with Cd (25 mg kg^?1), Pb (200 mg kg^?1) or Zn (200 mg kg^?1). The isolate also showed a high level of colonization in tissue interior of rapes. The present results demonstrated that Rahnella sp. JN6 is a valuable microorganism, which can cost-effectively improve the efficiency of phytoremediation in soils contaminated by Cd, Pb and Zn.     

Physiological and chemical response of the lichen, Flavoparmelia caperata (L.) Hale, to the urban environment of Kolkata, India

The present study was focused on the effect of increasing urbanization including industrial and traffic activity on the accumulation of heavy metals and possible damage of selected physiological parameters (composition of assimilation pigments, membrane lipid peroxidation, and membrane integrity) of an epiphytic foliose lichen, Flavoparmelia caperata (L.) Hale. The lichen samples were collected from three different localities in and around Kolkata, India, two sites being from the urban area and one from the relatively non-polluted sub-urban area. The results showed that thalli from the urban sites have significantly higher concentrations of Fe, Cr, Cu, Zn, and Pb compared to those collected from the sub-urban site. Physiological parameters of damage also exhibited stress symptoms in thalli from the urban sites—decreased chlorophyll a indicating less photosynthetic efficiency, and increase in lipid peroxidation and electrolyte conductivity indicating cell membrane injuries. Correlation studies among metals pinpointed vehicular traffic as the main source of pollution in this area.     

Biomonitoring of air quality in the Cologne Conurbation using pine needles as a passive sampler – Part III: Major and trace elements

We here report complementary trace element (Fe, Pb, Cd, Zn, Cr, Cu, Ni and sulfur) concentrations and ratios in pine needles collected in the urban area of Cologne, Germany. Potential element sources are discussed in conjunction with enviromagnetic and PAH data to evaluate air quality. Foliar trace element concentrations of Zn, Cr, Cu, Ni and sulfur are close to essential nutrient levels. Median concentrations of foliar Fe, Pb and Cd in Cologne are 132, 1.1, and 0.06 μg g^?1, respectively. Thus these elements are enhanced over biogenic background levels and show significant accumulation with needle exposure time. Foliar sulfur concentrations vary between 868 and 2076 μg g^?1 with a median value of 1409 μg g^?1, except for two locations where 2370 and 2379 μg g^?1 were observed. Cadmium serves as an indicator for local industrial emissions with short transport distances of only a few kilometres in Cologne City. Elevated Fe, Pb and Zn concentrations mark areas with higher traffic loads and agree with enhanced PAH burdens and magnetic susceptibility intensities of pine needles. Isopleths mapping and source differentiation of atmospheric pollutants using foliar trace elements is feasible. For temporal or spatial high-resolution studies more cost-effective environmental magnetics is recommended, which may guide in design of detailed studies aiming at identification and allocation of emission sources. Hereby, a combination of organic tracers (PAH), magnetic properties, and trace metals is considered most reliable.     

Trace elements in aerosol and precipitation at New Castle,NH, USA

Concentrations of a suite of trace elements (Al, Ag, As, Cd, Co, Cr, Cu, Fe, Ni, Pb, Sr, V, Zn) were measured in aerosol and precipitation samples collected at a coastal site in New Castle, NH, from August 1996, through July 1997. Metal concentrations in aerosol and precipitation exhibit a high degree of temporal variability over the annual cycle, varying by approximately one order of magnitude or less for aerosol metals and by ∼2–3 orders of magnitude in precipitation. Estimates of the total annual atmospheric deposition of metals to the Gulf of Maine range from ∼10³ kg yr⁻¹ for Ag, ∼10⁴–10⁵ kg yr⁻¹ for the majority of metals, and ∼10⁶ kg yr⁻¹ for the crustal elements Al and Fe.     

Relationship between heavy metals concentrations in egret species,their environment and food chain differences from two Headworks of Pakistan

Concentration of ten metals (Cd, Cr, Co, Cu, Fe, Li, Mn, Ni, Pb and Zn) were analyzed in the egg contents, prey and soil samples of little egret (Egretta garzetta) and cattle egret (Bubulcus ibis) from two Headworks to determine habitat and species-specific differences; to assess the importance of prey and habitat contamination as an exposure source for heavy metals. Concentration of Cu, Mn, Cr and Pb in egg contents, Fe, Co, Cu, Mn, Zn in prey and Fe, Co, Cu, Ni, Li in surface soils were significantly different (P < 0.05). Mean metal concentrations of Cr, Pb and Cd were relatively higher in little egret whereas Cu and Mn were higher in the egg contents of cattle egret. The mean concentrations of Cu, Mn and Zn were higher in prey samples of cattle egrets and Cr, Cd and Pb in prey samples of little egrets. In soil samples collected from little egret heronries metal concentrations were higher except Cu and Ni. Correlation Analysis and Hierarchical Agglomerative Cluster Analysis (HACA) identified relatively similar associations of metals and their source identification. Metals such as Fe, Cu, Mn, and Li were related with geochemical origin from parent rock material as well as anthropogenic input whereas Cr, Cd, Pb, Ni, Co and Zn were associated mostly with anthropogenic activities. The study suggested that eggs are useful bio-monitor of local heavy metal contamination.     

Mosses and lichens as biomonitors of trace metals. A comparison study on Hypnum cupressiforme and Parmelia caperata in a former mining district in Italy.

Samples of the moss Hypnum cupressiforme and the epiphytic lichen Parmelia, caperata were collected during the summer of 1999 in an area (Colline Metallifere, central Italy) intensively exploited in the past for metals (Cu, Fe, Pb, Zn) and currently for geothermal resources. Lichens were more sensitive than mosses to emissions of S compounds near geothermal fields and abandoned sulphide ore smelting plants. Comparison of elemental compositions of the two cryptogamic species from the same sampling sites showed significantly higher concentrations of lithophile elements (Al, Cr, Fe, Mn, Ni, Ti) in the moss and atmophile elements (Hg, Cd. Pb, Cu, V, Zn) in the lichen. Patterns of bioaccumulation of elements throughout the study area were quite similar for widespread pollutants such as S, B, As, Zn, Cr and Ni, but the lichen and the moss showed different distribution patterns of Hg, Cd and other elements subject to long-range atmospheric transport. These results are due to differences in the morphology and ecophysiology of mosses and lichens and indicate that these organisms cannot be used interchangeably as biomonitors of metals in areas with mineral deposits.     

Multi-element composition of historical lichen collections and bark samples,indicators of changing atmospheric conditions

Thirty six element signatures were compared in historical Parmelia sulcata samples from the Natural History Museum herbarium collected over the period 1797–1967 with those recorded in the same species and tree bark sampled in 2000 from Burnham Beeches, lying 40 km west of London. Nineteen elements reached highest concentrations in herbarium samples, consistent with a pollution legacy and dust contamination in the herbarium. Healthy Parmelia sampled east and down-wind of London at a farm during peak SO₂ emissions in 1967 contained highest V, Ni, Zn, Cd, Se, Ge contents, supporting derivation from fuel combustion; the same sample was previously determined as having a low δ34S and high S and N contents. Lowest V, Co, Ni, Cu, Zn, Sn, Ba, Pb, Mo, Sb, Li, B, Cs, U, Th, Ga contents were recorded in a sample with a high δ34S and low S content collected in 1887 from a remote region from Ross-shire, Scotland. Se and Cd enrichment, never-the-less suggest a transboundary pollution influence. Lichen Pb concentrations from Burnham Beeches were amongst the lowest recorded in spite of lichens being collected close to roads. Herbarium samples help interpret changes in element deposition where few data exist, in spite of dust contamination.     

Heavy metal (Cu, Zn, Cd and Pb) contamination of vegetables in urban India: a case study in Varanasi

The contributions of heavy metals in selected vegetables through atmospheric deposition were quantified in an urban area of India. Deposition rate of Zn was recorded maximum followed by Cu, Cd and Pb. The concentrations of Zn and Cu were highest in Brassica oleracea, Cd in Abelmoschus esculentus and B. oleracea, while Pb was highest in Beta vulgaris. Heavy metal pollution index showed that B. oleracea was maximally contaminated with heavy metals followed by A. esculentus and then B. vulgaris. The results of washing showed that atmospheric deposition has contributed to the increased levels of heavy metals in vegetables. Both Cu and Cd posed health risk to local population via test vegetables consumption, whereas Pb posed the same only through B. oleracea. The study concludes that atmospheric depositions can elevate the levels of heavy metals in vegetables during marketing having potential health hazards to consumers.     

Overall elemental dry deposition velocities measured around Lake Michigan

Overall dry deposition velocities of several elements were determined by dividing measured fluxes by measured airborne concentrations in different particle size ranges. The dry deposition measurements were made with a smooth surrogate surface on an automated dry deposition sampler (Eagle II) and the ambient particle concentrations were measured with a dichotomous sampler. These long-term measurements were made in Chicago, IL, South Haven, MI, and Sleeping Bear Dunes, MI, from December 1993 through October 1995 as part of the Lake Michigan Mass Balance Study. In general, the dry deposition fluxes of elements were highly correlated with coarse particle concentrations, slightly less well correlated with total particle concentrations, and least well correlated with fine particle concentrations. The calculated overall dry deposition velocities obtained using coarse particle concentrations varied from approximately 12 cm s⁻¹ for Mg in Chicago to 0.2 cm s⁻¹ for some primarily anthropogenic metals at the more remote sites. The velocities calculated using total particle concentrations were slightly lower. The crustal elements (Mg, Al, and Mn) had higher deposition velocities than anthropogenic elements (V, Cr, Cu, Zn, Mo, Ba and Pb). For crustal elements, overall dry deposition velocities were higher in Chicago than at the other sites.     

Road traffic emission factors for heavy metals

Quantifying the emissions and concentrations of heavy metals in urban air is a prerequisite for assessing their health effects. In this paper a combination of measurements and modelling is used to assess the contribution from road traffic emissions. Concentrations of particulate heavy metals in air were measured simultaneously during 1 year at a densely trafficked street and at an urban background site in Stockholm, Sweden. Annual mean concentrations of cadmium were 50 times lower than the EU directive and for nickel and arsenic concentrations were 10 and six times lower, respectively. More than a factor of two higher concentrations was in general observed at the street in comparison to roof levels indicating the strong influence from local road traffic emissions. The only compound with a significantly decreasing trend in the urban background was Pb with 9.1 ng m^?3 in 1995/96 compared to 3.4 ng m^?3 2003/04. This is likely due to decreased emissions from wear of brake linings and reduced emissions due to oil and coal combustion in central Europe.Total road traffic emission factors for heavy metals were estimated using parallel measurements of NOx concentrations and knowledge of NOx emission factors. In general, the emission factors for the street were higher than reported in road tunnel measurements. This could partly be due to different driving conditions, since especially for metals which are mainly emitted from brake wear, more stop and go driving in the street compared to in road tunnels is likely to increase emissions. Total emissions were compared with exhaust emissions, obtained from the COPERT model and brake wear emissions based on an earlier study in Stockholm. For Cu, Ni and Zn the sum of brake wear and exhaust emissions agreed very well with estimated total emission factors in this study. More than 90% of the road traffic emissions of Cu were due to brake wear. For Ni more than 80% is estimated to be due to exhaust emissions and for Zn around 40% of road traffic emissions are estimated to be due to exhaust emissions. Pb is also mainly due to exhaust emissions (90%); a fuel Pb content of only 0.5 mg L^?1 would give similar emission factor as that based on the concentration increment at the street. This is the first study using simultaneous measurements of heavy metals at street and roof enabling calculations of emission factors using a tracer technique.     

Health risk assessment for consumption of fish originating from ponds near Dabaoshan mine, South China

Mining effluents are a potential source of toxic metals in the surrounding aquatic ecosystem and pose a potential health risk to humans from fish consumption. The objective of this paper is to assess the impact of the long-term Dabaoshan mining operation on heavy metal accumulation in different fish species. Heavy metal accumulation (lead (Pb), cadmium (Cd), zinc (Zn), and copper (Cu)) in four tissues (liver, muscle, intestine, and gills) of five carp species (Hypophthalmichthys molitrix, Ctenopharyngodon idellus, Megalobrama amblycephala, Aristichthys nobilis, and Carassius auratus auratus) from two fishponds exposed to effluent waters from Dabaoshan mine, South China. The bioaccumulation factor (BAF) and target hazard quotients were calculated to assess potential health risks to local residents through fish consumption. Levels of heavy metals varied depending on the analyzed tissues. C. auratus auratus accumulated the higher Pb, Cd, Zn, and Cu in the intestine compared with other fish species. Liver of all five species contained high concentrations of Pb, Cd, Zn, and Cu. The BAF for the studied metals showed a descending order of Cd?>?Zn?>?Cu?>?Pb for fishpond 1 and Zn?>?Cd?>?Cu?>?Pb for fishpond 2. Risk assessments suggested that potential human health risk may be present due to high Pb and Cd concentration in the muscle of some fish species exceeding the national and international limits, although the target hazard quotients were less than one.     

Carbon mineralization,microbial activity and metal dynamics in tailing ponds amended with pig slurry and marble waste

A field experiment was set up in Cartagena-La Unión Mining District, SE Spain, aimed at evaluating the short-term effects of pig slurry (PS) amendment alone and together with marble waste (MW) on organic matter mineralization, microbial activity and stabilization of heavy metals in two tailing ponds. These structures pose environmental risk owing to high metals contents, low organic matter and nutrients, and null vegetation. Carbon mineralization, exchangeable metals and microbiological properties were monitored during 67 d. The application of amendments led to a rapid decrease of exchangeable metals concentrations, except for Cu, with decreases up to 98%, 75% and 97% for Cd, Pb and Zn, respectively. The combined addition of MW + PS was the treatment with greater reduction in metals concentrations. The addition of PS caused a significant increase in respiration rates, although in MW + PS plots respiration was lower than in PS plots. The mineralized C from the pig slurry was low, approximately 25–30% and 4–12% for PS and MW + PS treatments, respectively. Soluble carbon (Csol), microbial biomass carbon (MBC) and β-galactosidase and β-glucosidase activities increased after the application of the organic amendment. However, after 3 d these parameters started a decreasing trend reaching similar values than control from approximately day 25 for Csol and MBC. The PS treatment promoted highest values in enzyme activities, which remained high upon time. Arylesterase activity increased in the MW + PS treatment. Thus, the remediation techniques used improved soil microbiological status and reduced metal availability. The combined application of PS + MW reduced the degradability of the organic compounds.