Perspectives and limits for cement kilns as a destination for RDF

RDF, the high calorific value fraction of MSW obtained by conventional separation systems, can be employed in technological plants (mainly cement kilns) in order to obtain a useful energy recovery. It is interesting and important to evaluate this possibility within the general framework of waste-to-energy solutions. The solution must be assessed on the basis of different aspects, namely: technological features and clinker characteristics; local atmospheric pollution; the effects of RDF used in cement kilns on the generation of greenhouse gases; the economics of conventional solid fuels substitution and planning perspectives, from the point of view of the destination of RDF and optimal cement kiln policy. The different experiences of this issue throughout Europe are reviewed, and some applications within Italy are also been considered. The main findings of the study are that the use of RDF in cement kilns instead of coal or coke offers environmental benefits in terms of greenhouse gases, while the formation of conventional gaseous pollutants is not a critical aspect. Indeed, the generation of nitrogen oxides can probably be lower because of lower flame temperatures or lower air excess. The presence of chlorinated micro-pollutants is not influenced by the presence of RDF in fuel, whereas depending on the quality of the RDF, some problems could arise compared to the substituted fuel as far as heavy metals are concerned, chiefly the more volatile ones.     

A Novel and Formaldehyde-Free Preparation Method for Lignin Amine and Its Enhancement for Soy Protein Adhesive

In this work, a novel two-step process to prepare primary lignin amine was developed. The lignin used in this study was obtained from the residue of cellulosic sugar fermentation for bioethanol (referred as “lignin”). The lignin was initially oxidized through Fenton oxidation. The oxidized lignin was further converted to lignin amine by reductive amination. Ammonia was used in the second step leading to give the highly active primary lignin amine. The oxidation and reduction exhibited relatively high yields of 80.0 and 91.2 % respectively. For comparison, lignin was partially depolymerized via mild hydrogenolysis and then the partial depolymerized lignin was also converted to lignin amine using the same method. The obtained lignin amines were characterized in detail using elemental analysis, proton nuclear magnetic resonance (¹H NMR), and Fourier transform infrared spectroscopy (FTIR). Further, modification of soy protein adhesive by lignin amine was exemplified in wood bonding, and the results indicated that addition of lignin amine greatly increased water resistance of soy protein adhesives.     

A macrokinetic model for dimensioning of biofilters for VOC and odour treatment

Biofiltration is a cost-effective and environmentally sustainable technology for the treatment of exhaust gases from a variety of sources. Although the process setup is relative simple, many physical, chemical, and microbiological processes are involved. Microkinetic models attempting to cover all of these processes are often more complex than reliable; on the other hand, many macrokinetic approaches have a tendency to oversimplification. In order to develop a simple and accurate protocol to derive biofilter design criteria from experimental trials, a macrokinetic model based on chemical engineering fundamentals was developed. The model covers first-order kinetics as well as kinetics shifting from first-order at low substrate concentrations to zero-order at elevated concentrations and can be applied to single VOCs and odours as measured by olfactometry.     

有机氯废料的回收利用和净化处理方法

介绍了有机氯废料回收利用和净化处理的几种方法,着重介绍了低温等离子流法、氢化法、高温氯化法、火焰氧化法的工艺原理和工艺过程。     

Oil outflow estimates for tankers and barges

Results of an analysis to estimate potential oil outflow from tankers in the event of groundings and collisions is presented. Three baseline tanker types are considered: pre-MARPOL (COW), MARPOL '73 (SBT only), MARPOL '73/'78 (PL/SBT) before and after these tankers have been retrofitted with various combinations of pollution prevention measures. Specifically the analysis examines four tanker sizes, 46 600, 71 000, 152 000 and 268 000 dwt, and various pollution measures — protectively located spaces (PL/spaces) in various ballast arrangements and with clean ballast tanks (CBTs), hydrostatically balanced loading (HBL), probabilistically located HBL, combinations of HBL and PL/spaces, double bottom or double side retrofits, and replacement of the tanker with a double hull vessel. Additionally, oil outflow estimates are presented for a US coastal and an ocean going barge of over 5000 gt with and without PL/spaces, PL/SBT, and HBL. The accidental oil outflow estimates are developed in accordance with probabilistic and deterministic models of IMOs MARPOL Annex I Regulations 13F and 13G. The accidental oil outflow estimates presented in the paper may provide oil spill response and related organizations with information to assist in planning for oil spill response activities.     

Evaluation of leaching and extraction procedures for soil and waste

Laboratory leaching tests may be used for source term determination as a basis for risk assessment for soil-groundwater pathways on contaminated sites. In order to evaluate different leaching procedures, batch extraction tests and percolation tests were performed using three reference materials produced from contaminated soil, demolition waste and municipal solid waste incinerator bottom ash. Emphasis was placed on the investigation of the leachability of the heavy metals copper and chromium, polycyclic aromatic hydrocarbons (PAHs) and the anions chloride and sulfate. Significant discrepancies between column experiments and batch/extraction tests were found for the release of PAHs and to a lesser extent for the heavy metals Cu and Cr. Additionally interlaboratory comparisons were conducted based on different leaching tests with the reference materials and evaluated using the criteria of comparability and reproducibility. The best reproducibility was achieved for all investigated substances in column tests. The reproducibility of batch tests was acceptable except for PAHs. The results from the experimental work will help establish standardized and feasible laboratory procedures as fundamental for substance specific risk assessment of contaminated sites.     

Using MCDA and GIS for hazardous waste landfill siting considering land scarcity for waste disposal

The main aim of this study was to develop a procedure that minimizes the wasting of space for the siting of hazardous waste landfills as part of a solid waste management system. We wanted to tackle the shortage of land for waste disposal that is a serious and growing problem in most large urban regions. The procedure combines a multi-criteria decision analysis (MCDA) approach with a geographical information system (GIS). The GIS was utilised to obtain an initial screening in order to eliminate unsuitable areas, whereas the MCDA was developed to select the most suitable sites. The novelty of the proposed siting procedure is the introduction of a new screening phase before the macro-siting step aimed at producing a “land use map of potentially suitable areas” for the siting of solid waste facilities which simultaneously takes into consideration all plant types. The issue of obtaining sites evaluations of a specific facility was coupled with the issue of not wasting land appropriate to facilitate other types of waste management options. In the developed case study, the use of an innovative criteria weighting tool (the “Priority Scale”) in combination with the Analytic Hierarchy Process was useful to easier define the priorities of the evaluation criteria in comparison with other classic methods such as the Paired Comparison Technique in combination with the Simple Additive Weighting method.     

ICAROS: An Integrated Computational Environment for the Assimilation of Environmental Data and Models for Urban and Regional Air Quality

Integrated environmental management in urban areas is nowadaysconsidered a sine qua non objective of Community and nationalenvironmental and development policies. A large amount ofscientific information on the state of the environment is nowavailable from a large pool of data sources. This work presentsan innovative method for integration of these data sources andeffective coupling of environmental information with appropriatemodels and decision-support tools. State-of-the-art Earthobservation techniques, ground-based air quality measurements,atmospheric transport and chemical modelling, and multi-criteriadecision-aid systems are used in an integrated information fusionenvironment in support of environmental and health impactassessment and decision-making at the urban and regional scales. Results of the pilot application of the method in the area ofLombardy in Northern Italy demonstrate the validity andusefulness of this novel approach.     

加快农村可利用垃圾回收利用体系建设的实施意见

2011年1月11日,四川省城乡环境综合治理工作领导小组办公室、四川省供销合作社联合社联合下发"关于印发《加快农村可利用垃圾回收利用体系建设的实施意见》的通知"(川城乡治办[2011]6号)。现全文刊发,供各地读者学习交流。     

Strategy for separation and treatment of disaster waste: a manual for earthquake and tsunami disaster waste management in Japan

Shortly after the March 11th earthquake and tsunami in eastern Japan, a Task Team for Disaster Waste Management and Reconstruction was established within the Japan Society of Material Cycles and Waste Management (JSMCWM). One of the major tasks undertaken by the team was to create a manual entitled, Strategies for Separation and Treatment of Disaster Waste. In this paper, this JSMCWM manual is introduced, followed by a review of existing guidelines for disaster waste management in various countries. We identify useful guidelines created by international agencies, national and local governments. The JSMCWM manual adds our new experiences, especially characterized by a huge scale of disaster and tsunami information, to the existing knowledge with an emphasis on separation and subsequent treatment options. It should be desirable to share our knowledge and experiences, not only domestically but also with other countries in the world, especially regions that could be affected by large earthquake and tsunami events.     

Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.     

Unit costs for decontamination and dismantlement of structures

A series of relationships have been developed for estimating unit costs for decontamination and dismantlement (D&D) of a number of structure types. These relationships may be applied in the absence of other data to obtain rough order-of-magnitude cost estimates for D&D activities. The relationships were developed using D&D costs estimated for various types of buildings at the U.S. Department of Energy Fernald site. These unit costs take into account the level of radiological contamination as well as the building size and type.     

粉煤灰干法除炭技术与设备

根据最新收集的文献资料，介绍了国外典型的粉煤灰干法除炭，特别是电选除炭方面的新进展，包括其工作原理、优缺点及工业应用情况。旨在为国内相关企业提供参考。     

Guidance for performing footprint analyses and life‐cycle assessments for the remediation industry

The US Sustainable Remediation Forum (SURF) proposes a nine‐step process for conducting and documenting a footprint analysis and life‐cycle assessment (LCA) for remediation projects. This guidance is designed to assist remediation practitioners in evaluating the impacts resulting from potential remediation activities so that preventable impacts can be mitigated. Each of the nine steps is flexible and scalable to a full range of remediation projects and to the tools used by remediation practitioners for quantifying environmental metrics. Two fictional case studies are presented to demonstrate how the guidance can be implemented for a range of evaluations and tools. Case‐study findings show that greater insight into a study is achieved when the nine steps are followed and additional opportunities are provided to minimize remediation project footprints and create improved sustainable remediation solutions. This guidance promotes a consistent and repeatable process in which all pertinent information is provided in a transparent manner to allow stakeholders to comprehend the intricacies and tradeoffs inherent in a footprint analysis or LCA. For these reasons, SURF recommends that this guidance be used when a footprint analysis or LCA is completed for a remediation project. © 2011 Wiley Periodicals, Inc.     

Model calibration and validation for OFMSW and sewage sludge co-digestion reactors

A mathematical model has recently been proposed by the authors to simulate the biochemical processes that prevail in a co-digestion reactor fed with sewage sludge and the organic fraction of municipal solid waste. This model is based on the Anaerobic Digestion Model no. 1 of the International Water Association, which has been extended to include the co-digestion processes, using surface-based kinetics to model the organic waste disintegration and conversion to carbohydrates, proteins and lipids. When organic waste solids are present in the reactor influent, the disintegration process is the rate-limiting step of the overall co-digestion process. The main advantage of the proposed modeling approach is that the kinetic constant of such a process does not depend on the waste particle size distribution (PSD) and rather depends only on the nature and composition of the waste particles. The model calibration aimed to assess the kinetic constant of the disintegration process can therefore be conducted using organic waste samples of any PSD, and the resulting value will be suitable for all the organic wastes of the same nature as the investigated samples, independently of their PSD. This assumption was proven in this study by biomethane potential experiments that were conducted on organic waste samples with different particle sizes. The results of these experiments were used to calibrate and validate the mathematical model, resulting in a good agreement between the simulated and observed data for any investigated particle size of the solid waste. This study confirms the strength of the proposed model and calibration procedure, which can thus be used to assess the treatment efficiency and predict the methane production of full-scale digesters.     

关于钢铁企业建设生态工业园的思考与建议

生态工业园是一种新型工业组织形态，是根据循环经济理论和工业生态学原理建立的一种与生态环境和谐共存的新型工业园区。论述了钢铁企业在搞好企业内部循环经济的基础上，向生态工业园发展的必要性；提出建设以钢铁企业为核心的生态工业园的三种模式；并对钢铁企业如何适时有效地发展生态工业园提出建议。     

A BIM-based system for demolition and renovation waste estimation and planning

Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C&D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D&R) works and the growing amount of D&R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking.In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D&R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results could provide alerts to contractors ahead of time at project planning stage. This paper also presents an example scenario with a 47-floor residential building in Hong Kong to demonstrate our D&R waste estimation and planning system. As the BIM technology has been increasingly adopted in the architectural, engineering and construction industry and digital building information models will likely to be available for most buildings (including historical buildings) in the future, our system can be used in various demolition and renovation projects and be extended to facilitate project control.     

Adaptive sampling and analysis programs for contaminated soils

Adaptive sampling and analysis programs (ASAPs) provide a cost-effective alternative to traditional sampling program designs. ASAPs are based on field analytical methods for rapid sample turnaround and field-based decision support for guiding the progress of the sampling program. One common objective of ASAPs is to delineate contamination present in soils, either to support feasibility studies or remedial action designs. An ASAP based on portable gas chromatograph/ mass spectrograph (GC/MS) technologies developed at Tufts University combined with decision support tools created at Argonne National Laboratory was used to delineate explosives contamination in soils at Joliet Army Ammunition Plant, Joliet, Illinois. Tufts' GC/MS technologies provided contaminant-specific identification and quantification with rapid sample turnaround and high sample throughput. Argonne's decision support tools estimated contamination extent, determined the uncertainty associated with those estimates, and indicated where sampling should continue to minimize uncertainty. In the case of Joliet, per sample analytical costs were reduced by 75 percent as compared to the cost of off-site laboratory analyses for explosives. The use of an ASAP resulted in a much more accurate identification and delineation of contaminated areas than a traditional sampling program would have with the same number of samples collected on a regular grid. While targeting explosives contamination in soils at Joliet, the ASAP technologies used in this demonstration have much broader application.     

Humidity- and Age-Tolerant Starch-Based Sponge for Loose-Fill Packaging

Loose-fill packaging sponges were extruded from mixtures of 54–62% hydroxypropylated (HP 5%) amylomaize V (50% amylose) and wheat starches, 17–24% synthetic polymer, 13% water, 7% blowing agent(s), and 0.5% nucleating agent. One product made from 28% HP wheat starch, 28% HP amylomaize V starch, 12% ethylene vinyl alcohol (EVOH) copolymer, 8% polystyrene (PS), and 3% polystyrene maleic anhydride (PSMA) copolymer, plus the other raw materials, had a compressibility and resilience that matched those of expanded polystyrene (EPS), although its bulk density was four times higher. The starchy sponge showed 16% shrinkage in volume at 90% relative humidity and was 2% soluble in excess water, both at 25°C. After aging for 18 months near 25°C, the HP starchy sponge gave only a trace of fines in a simulated shipping test, compared to 20% fines from a biodegradable, starch-based, loose-fill sponge of commerce.