Medium-scale experiments on vented hydrogen deflagration

A series of medium-scale experiments on vented hydrogen deflagration was carried out at the KIT test side in a chamber of 1 × 1 × 1 m³ size with different vent areas. The experimental program was divided in three series: (1) uniform hydrogen–air mixtures; (2) stratified hydrogen–air mixtures within the enclosure; (3) a layer deflagration of uniform mixture. Different uniform hydrogen–air mixtures from 7 to 18% hydrogen were tested with variable vent areas 0.01–1.0 m². One test was done for rich mixture with 50% H₂. To vary a gradient of concentration, all the experiments with a stratified hydrogen–air mixtures had about 4%H₂ at the bottom and 10 to 25% H₂ at the top of the enclosure. Measurement system consisted of a set of pressure sensors and thermocouples inside and outside the enclosure. Four cameras combined with a schlieren system (BOS) for visual observation of combustion process through transparent sidewalls were used. Four experiments were selected as benchmark experiments to compare them with four times larger scale FM Global tests (Bauwens et al., 2011) and to provide experimental data for further CFD modelling. The nature of external explosion leading to the multiple pressure peak structure was investigated in details. Current work addresses knowledge gaps regarding indoor hydrogen accumulations and vented deflagrations. The experiments carried out within this work attend to contribute the data for improved criteria for hydrogen–air mixture and enclosure parameters to avoid unacceptable explosion overpressure. Based on theoretical analysis and current experimental data a further vent sizing technology for hydrogen deflagrations in confined spaces should be developed, taking into account the peculiarities of hydrogen–air mixture deflagrations in presence of obstacles, concentration gradients of hydrogen–air mixtures, dimensions of a layer of flammable cloud, vent inertia, etc.     

Numerical analysis of hydrogen deflagration mitigation by venting through a duct

This paper presents a model and simulation results for the mitigation of a hydrogen–air deflagration by venting through a duct. A large eddy simulation (LES) model, applied previously to study both closed-vessel, and open atmosphere hydrogen–air deflagrations, was developed further to model a hydrogen–air explosion vented through a duct. Sub-grid scale (SGS) flame wrinkling factors were introduced to model major phenomena which contribute to the increase of flame surface area in vented deflagrations. Simulations were conducted to validate the model against 20% hydrogen–air mixture deflagrations (vent diameters 25 and 45 cm) and 10% hydrogen–air mixture deflagration (vent diameter 25 cm). There was reasonable correlation between the simulations and the experimental data. The comparative importance of different physical phenomena contributing to the flame wrinkling is discussed.     

Effects of a Duct on the Venting of Explosions—Critical Review

The present paper deals with a study of the effect of ducting on explosions in vented enclosures. The presence of a duct was shown to increase the pressure reached in vented vessels. At the moment it is still not clear what are the main phenomena occurring in ducted-venting systems and no reliable correlations are available for the sizing of ducted vented systems. The only correlation available for gas explosions was developed by Bartknecht (1993) and assumed as a guideline in NFPA 68 (2002) while for dust explosions more correlations are available as reported in VDI 3673 (2002), in NFPA 68 (2002) and in Tamanini and Fisher (2003).This paper presents a critical review of available experimental and theoretical results on gas explosions in vessels vented through a duct that was carried out mainly to understand the role of the phenomena involved. Furthermore, the available correlations for ducted-venting of gaseous explosions of NFPA 68 (2002) and for dust explosions (Tamanini and Fisher, 2003; VDI 3673,2002; NFPA 68,2002) were applied to the experimental results available in the literature, to test their validity and applicability.     

Venting of deflagrations: hydrocarbon–air and hydrogen–air systems

A set of 34 experiments on vented hydrocarbon–air and hydrogen–air deflagrations in unobstructed enclosures of volume up to 4000 m³ was processed with use of the advanced lumped parameter approach. Reasonable compliance between calculated pressure–time curves and experimental pressure traces is demonstrated for different explosion conditions, including high, moderate, low and extremely low reduced overpressures in enclosures of different shape (L_max:L_min up to 6:1) with different type and position of the ignition source relative to the vent, for near-stoichiometric air mixtures of acetone, methane, natural gas and propane, as well as for lean and stoichiometric hydrogen–air mixtures. New data were obtained on flame stretch for vented deflagrations.The fundamental Le Chatelier–Brown principle analog for vented deflagrations has been considered in detail and its universality has been confirmed. The importance of this principle for explosion safety engineering has been emphasized and proved by examples.A correlation for prediction of the deflagration–outflow interaction number, χ/μ, on enclosure scale, Bradley number and vent release pressure is suggested for unobstructed enclosures and a wide range of explosion conditions. Fractal theory has been employed to verify the universality of the dependence revealed of the deflagration–outflow interaction number on enclosure scale.In spite of differences between the thermodynamic and kinetic parameters of hydrocarbon–air and hydrogen–air systems, they both obey the same general regularities for vented deflagrations, including the Le Chatelier–Brown principle analog and the correlation for deflagration–outflow interaction number.     

Reliability and applicability of empirical equations in predicting the reduced explosion pressure of vented gas explosions

Explosions caused by the rapid release of energy from the expansion of burnt gases, along with an associated pressure rise, in an enclosure can be mitigated by venting. Many empirical equations have been derived based on vented gas deflagration phenomena. In the present paper, four empirical equations for gas venting were reviewed, i.e., NFPA 68, the European Standard (EN 14994), Molkov et al. and Bradley and Mitcheson in order to assess their reliability and applicability for predicting the reduced explosion pressure (P_red) of propane-air, methane-air and hydrogen-air mixtures at three different chamber-scale volumes. The results showed that the NFPA 68 correlation is the most appropriate method for predicting P_red, while Bradley and Mitcheson gave values closer to those of experimental data for propane-air mixtures in medium and larger chambers, respectively. However, none of the predicted correlations was able to provide a reasonable prediction of P_red in a hydrogen-air explosion. In addition, these predicted correlations showed greater discrepancies in P_red values in the presence of vent area, ignition position and obstacles.     

Vent Sizing Criteria for Partial Volume Deflagration

The accidental spill of volatile solvents or the release of flammable gases within equipment and buildings is likely to form fuel concentration gradients unless efficient mixing is provided. As a consequence, even small amounts of fuel can form flammable clouds, and partial volume deflagrations may occur. Nevertheless, few indications are given in international guidelines for vent sizing and only over-conservative well-mixed stoichiometric assumptions are used. In this paper, we propose a predictive methodology for the evaluation of the dynamics of partial volume deflagration, aiming at defining useful correlations for the design of vent devices, starting from the fundamental equation for the rate of pressure rise and flame propagation in closed vessel. We define a ‘stratified gas deflagration index’ K_G(m), where m is the filling ratio, and use it with the most common design equations for vent sizing. The approach has been validated by means of a CFD code for the simulation of stratified laminar methane–air explosion by varying both filling ratio and volume.     

Deflagration suppression using expanded metal mesh and polymer foams

Expanded metal mesh and polymer foams of appropriate pore or cell size and sufficient surface area per unit volume can suppress deflagrations of gas/vapor–air mixtures. This paper reviews the requirements that have been established for use of these materials in military aircraft fuel tanks. Extensions and generalizations of these requirements for other applications have been developed and incorporated into the 2008 edition of the NFPA 69 Standard for Explosion Prevention. The new NFPA 69 requirements for testing, evaluating, and installing these materials are summarized here along with an explanation of the basis and rationale for these requirements.     

Consequence prediction for dust explosions involving interconnected vessels using computational fluid dynamics modeling

Combustible dust explosions continue to present a significant threat toward operating personnel and pneumatic conveyance equipment in a wide variety of processing industries. Following ignition of suspended fuel within a primary enclosure volume, propagation of flame and pressure fronts toward upstream or downstream interconnected enclosures can result in devastating secondary explosions if not impeded through an appropriate isolation mechanism. In such occurrences, an accelerated flame front may result in flame jet ignition within the secondary vessel, greatly increasing the overall explosion severity. Unlike an isolated deflagration event with quantifiable reduced pressures (vent sizing according to NFPA 68 guidance), oscillation of pressure between primary and secondary process vessels leads to uncertain overpressure effects. Dependent on details of the application such as relative enclosure volumes, relief area, fuel type, suspended concentration, duct size, and duct length, the maximum system pressure in both interconnected vessels can be unpredictable. This study proposes the use of FLame ACceleration Simulator (FLACS) computational fluid dynamics (CFD) modeling to provide reliable consequence predictions for specific case scenarios of dust deflagrations involving interconnected equipment. Required minimum supplement to the originally calculated relief area (A_v) was determined through iterative simulation, allowing for reduced explosion pressures (P_red) to be maintained below theoretical enclosure design strengths (P_es).     

Stratified Propane–Air Explosions in a Duct Vented Geometry: Effect of Concentration,Ignition and Injection Position

Duct vented geometries are a common feature in modern industrial installations where a vessel is protected from internal explosion pressures, and where the explosion products need to be directed away from sensitive areas. In this research, stratified propane–air concentrations have been investigated using a vented vessel connected to a vent pipe. Concentration, injection position and ignition position were varied and comparisons made with homogeneous tests at the same ‘global concentration’ for each condition. The maximum pressures produced by the worst case stratified mixture were only about a quarter of the maximum produced by the worst case homogeneous mixtures. However, for lean concentrations, stratified mixtures were shown to produce consistently greater pressures than the equivalent homogeneous case, irrespective of ignition position. In addition, results are presented which demonstrate that end ignition appears to be more severe than central ignition, contrary to what is reported in literature.     

New dust explosion venting design requirements for turbulent operating conditions

The 2007 edition of the National Fire Protection Association Standard 68 for Explosion Protection by Deflagration Venting has a new provision to account for the turbulence level in combustible dust or powder processing equipment. This paper explains the development of this new provision for increased deflagration vent area requirements in highly turbulent combustible dust/powder processing equipment. The development includes a review of initial turbulence level effects on vented explosion pressures, and a review of turbulence levels measured in ASTM E1226 and ISO 6184/1 explosion test procedures to determine K_st. A review of operating conditions in some representative spray dryer plant equipment suggests that most equipment of this type probably do not have high enough air flows to require increased explosion vent areas due to turbulence, but some types of equipment with high tangential entrance air flows may well need larger vent areas.     

Computational fluid dynamics simulations of hydrogen releases and vented deflagrations in large enclosures

This paper presents model predictions obtained with the CFD tool FLACS for hydrogen releases and vented deflagrations in containers and larger enclosures. The paper consists of two parts. The first part compares experimental results and model predictions for two test cases: experiments performed by Gexcon in 20-foot ISO containers (volume 33 m³) as part of the HySEA project and experiments conducted by SRI International and Sandia National Laboratories in a scaled warehouse geometry (volume 45.4 m³). The second part explores the use of the model system validated in the first part to accidental releases of hydrogen from forklift trucks inside a full-scale warehouse geometry (32 400 m³). The results demonstrate the importance of using realistic and reasonably accurate geometry models of the systems under consideration when performing CFD-based risk assessment studies. The discussion highlights the significant inherent uncertainty associated with quantitative risk assessments for vented hydrogen deflagrations in complex geometries. The suggestions for further work include a pragmatic approach for developing empirical correlations for pressure loads from vented hydrogen deflagrations in industrial warehouses with hydrogen-powered forklift trucks.     

External pressures generated by vented gas and dust explosions

Several different data correlations have been developed for the external pressures associated with vented gas explosions and dust explosions. These correlations, which are applicable to external locations in the direct line-of-sight of the enclosure vent, are reviewed here. In addition, the application of spherically symmetric and of ellipsoidal blast wave models is explored as a possible means of calculating external pressures over a wider range of conditions than is possible with the existing data correlations. Results indicate that the spherically symmetric blast wave model can obtain a comparable accuracy (8–9 kPa standard deviation) for line-of-sight locations as the more recent data correlations. In the case of the lower blast pressures at locations perpendicular to the vent line-of-sight, the ellipsoidal blast wave provides significantly better agreement with data (to within 1 kPa standard deviation for the one set of available test data) than the spherically symmetric model.     

High voltage and break spark ignition of propylene/air mixtures at various initial pressures

The original break spark test apparatus for intrinsically safe circuits was modified to allow the measurements of minimum ignition currents (MICs) at different initial pressures between 20 and 120 kPa. The MICs of different propylene/air mixtures at ambient temperature and at both atmospheric and sub-atmospheric pressures were measured. The corresponding minimum ignition energies (MIEs) using break sparks were calculated and compared with those derived from MIE/quenching distance correlations using high voltage sparks between flanged electrodes.     

CFD modelling of hydrogen and hydrogen-methane explosions – Analysis of varying concentration and reduced oxygen atmospheres

This paper evaluates the predictive capabilities of the advanced consequence model FLACS-CFD for deflagrations involving hydrogen. Two modelling approaches are presented: the extensively validated model system originally developed for hydrocarbons included in FLACS-CFD 22.1 and a Markstein number dependent model implemented in the in-house version FLACS-CFD 22.1 IH. The ability of the models to predict the overpressure and the flame arrival time for scenarios with different concentrations of hydrogen, and thus different Lewis and Markstein numbers, is assessed. Furthermore, the effect of adding methane or nitrogen on overpressure for different regimes of premixed combustion are investigated. The validation dataset includes deflagrations in the open or in congested open areas and vented deflagrations in empty or congested enclosures. The overpressure predictions by FLACS-CFD 22.1 IH are found to be more accurate than those obtained with FLACS-CFD 22.1 for scenarios with varying hydrogen concentrations and/or added nitrogen or methane in the mixture. The predictions by FLACS-CFD 22.1 IH for lean hydrogen mixtures are within a factor of 2 of the values observed in the experiments. Further development of the model is needed for more accurate prediction of deflagrations involving rich hydrogen mixtures as well as scenarios with other fuels and/or conditions where the initial pressure or temperature deviate significantly from ambient conditions.     

Experimental study on vented gas explosion in a cylindrical vessel with a vent duct

A study of vented explosions in a length over diameter (L/D) of 2 in cylindrical vessel connecting with a vent duct (L/D = 7) is reported. The influence of vent burst pressure and ignition locations on the maximum overpressure and flame speeds at constant vent coefficient, K of 16.4 were investigated to elucidate how these parameters affect the severity of a vented explosion. Propane and methane/air mixtures were studied with equivalence ratio, Φ ranges from 0.8 to 1.6. It is demonstrated that end ignition exhibited higher maximum overpressures and flame speeds in comparison to central ignition, contrary to what is reported in literature. There was a large acceleration of the flame toward the duct due to the development of cellular flames and end ignition demonstrated to have higher flame speeds prior to entry into the vent due to the larger flame distance. The higher vent flow velocities and subsequent flame speeds were responsible for the higher overpressures obtained. Rich mixtures for propane/air mixtures at Φ = 1.35 had the greatest flame acceleration and the highest overpressures. In addition, the results showed that Bartknecht's gas explosion venting correlation is grossly overestimated the overpressure for K = 16.4 and thus, misleading the impact of the vent burst pressure.     

Effects of hydrogen addition on the confined and vented explosion behavior of methane in air

Multi-component gas mixture explosion accidents occur and recur frequently, while the safety issues of multi-component gas mixture explosion for hydrogen–methane mixtures have rarely been addressed.Numerical simulation study on the confined and vented explosion characteristics of methane-hydrogen mixture in stoichiometric air was conducted both in the 5 L vessel and the 64 m³ chamber, involving different mixture compositions and initial pressures. Based on the results and analysis, it is shown that the addition of hydrogen has a negative effect on the explosion pressure of methane-hydrogen mixture at adiabatic condition. While in the vented explosion, the addition of the hydrogen has a significant positive effect on the explosion hazard degree. Additionally, the addition of hydrogen can induce a faster reactivity and enhance the sensitivity of the mixture by reducing the explosion time and increasing the rate of pressure rise both in confined and vented explosion. Both the maximum pressure and the maximum rate of pressure rise increase with initial pressure as a linear function, and also rise with the increase of hydrogen content in fuel. The increase in the maximum rate of pressure rise is slight when hydrogen ratio is lower than 0.5, however, it become significant when hydrogen ratio is higher than 0.5. The maximum rate of pressure rise for stoichiometric hydrogen-air is about 10 times the one of stoichiometric methane-air.Furthermore, the vent plays an important role to relief pressure, causing the decrease in explosion pressure and rate of pressure rise, while it can greatly enhance the flame speed, which will extend the hazard range and induce secondary fire damages. Additionally it appears that the addition of hydrogen has a significant increasing effect on the flame speed. The propagation of flame speed in confined explosion can be divided into two stages, increase stage and decrease stage, higher hydrogen content, higher slope. But in the vented explosion, the flame speed keeps increasing with the distance from the ignition point.     

Evaluating the overall efficiency of a flameless venting device for dust explosions

Results from cornstarch explosion tests using a flameless venting device (mounted over a burst disc) on an 8 m³ vessel are presented and used to determine the overall efficiency of the device, which is defined as the ratio between its effective vent area and the nominal vent area. Because these devices are comprised of an arrestor element mounted over an impulsively-actuated venting device (such as a burst disc), the functional form of the overall efficiency is taken as the product of the area efficiency (i.e., the ratio between the effective vent area of the entire assembly to that of the venting device without the arrestor element) and the burst efficiency (i.e., the ratio of the effective vent area of the venting device without the arrestor element to the nominal vent area). The effective vent areas are calculated from measured overpressures using three different empirical correlations (FM Global 2001, NFPA 2007, and VDI 2002). Furthermore, due to significant variations in the effective reactivity from test to test, a correction factor proportional to the initial flame speed is applied when determining the area efficiency. In general, it was found that the FM Global and NFPA methodologies yield consistent results with less scatter than VDI 3673.     

The effect of vent size and concentration in vented gasoline-air explosions

Experimental data from vented explosion tests using gasoline-air mixtures with concentrations from 0.88 to 2.41% vol. are presented. A 2L vessel was used for the tests with vent sizes of 25 cm², 50 cm² and 100 cm². The tests were focused on the effect of gasoline vapor concentration and vent size on the pressure development and the flame behavior inside and outside the vessel. It was found that the inner flame propagation speed was mainly dependent on the initial concentration, while the maximum flame spreading distance was mainly influenced by the vent size. The external flame speed and duration could be influenced by the combination of the two properties. The internal pressure increases gradually with the flame propagated inside the vessel and decreased sharply when the vent failed. High-pressure durations containing pressure peaks were recorded by transducers in front of the vent and oscillations could be observed besides the vent. At any measure point, the maximum external pressures for A = 25 cm² or 50 cm² were significantly larger than those for A = 100 cm².     

Scaling parameters for vented gas and dust explosions

Results of experiments or calculations for vented explosions are usually presented by expressing a term containing the peak (reduced) pressure as a function of a vent parameter. In gas explosions, the reactivity of the system has been typically characterized through an effective burning velocity, u_f. In the case of dust explosions, a normalized peak rate of pressure rise, K(=V^1/3(dp/dt)_max), has been used instead. Depending on the chosen approach, comparisons between systems with the same “reactivity” take different meanings. In fact, correlation formulas resulting from these two approaches imply different scaling between important system parameters. In the case of a constant-u_f system, and for sufficiently large vent areas, the reduced pressure, Δp_r, is approximately proportional to the square of the peak unvented pressure, Δp_m. On the other hand, correlations developed for constant-K systems imply proportionality of Δp_r with Δp_m raised to a power between −5/3 and −1, with the exact value depending on the assumptions made on the shape of the pressure profile. While the ultimate resolution of the details of the scaling may require recourse to experiments, this theoretical analysis offers a tool for the planning of such experiments and for the interpretation of their results. The paper provides a discussion of these scaling issues with the help of predictions from an isothermal model of vented explosions.     

Determination of explosion limits – Criterion for ignition under non-atmospheric conditions

Many industrial processes are run at non-atmospheric conditions (elevated temperatures and pressures, other oxidizers than air). To judge whether and if yes to what extent explosive gas(vapor)/air mixtures will occur or may be generated during malfunction it is necessary to know the safety characteristic data at the respective conditions. Safety characteristic data like explosion limits, are depending on pressure, temperature and the oxidizer. Most of the determination methods are standardized for ambient conditions. In order to obtain determination methods for non-atmospheric conditions, particularly for higher initial pressures, reliable ignition criteria were investigated. Ignition tests at the explosion limits were carried out for mixtures of methane, propane, n-butane, n-hexane, hydrogen, ammonia and acetone in air at initial pressures up to 20 bar. The tests have been evaluated according to different ignition criteria: visual flame propagation, temperature and pressure rising. It could be shown that flame propagation and occasionally self-sustained combustion for several seconds occurred together with remarkable temperature rise, although the pressure rise was below 3%. The results showed that the combination of a pressure rise criterion of 2% and a temperature rise criterion of 100 K seems to be a suitable ignition criterion for the determination of explosion limits and limiting oxidizer concentration at higher initial pressures and elevated temperatures. The tests were carried out within the framework of a R&D project founded by the German Ministry of Economics and Technology.