Mussel-based monitoring of trace metal and organic contaminants along the east coast of China using Perna viridis and Mytilus edulis

Green lipped mussels, Perna viridis, and blue mussels, Mytilus edulis, were collected from seven locations along the east coast of China in September and October 2001. The mussel tissues were analyzed for metals (Ag, As, Cd, Cr, Ni, Pb, Se, Zn, Cu, Fe and Hg), and trace organic contaminants including organochlorine compounds (OCs), polycyclic aromatic hydrocarbons (PAHs; based on 24 individual PAHs), polychlorinated biphenyls (PCBs) and petroleum hydrocarbons (PHCs). Maximum concentrations of Ag, As, Cd, Cr, Ni, Pb, Se, Zn, Cu, Fe and Hg in the mussel tissues were 0.14, 26.76, 5.31, 15.72, 4.78, 2.93, 7.40, 231.0, 54.17, 1002 and 317.3 microg/g dry weight respectively. Levels of DDTs, PAHs, PCBs and PHCs in the mussel samples were 14-640, 456-3495, 1-13 ng/g and 621-2863 microg/g dry weight, respectively. Results of this study indicated that contaminant levels were, in general, higher or at least comparable to those reported in other local or regional studies. Mussel samples collected in Chongming Dao in Shanghai and Jiao Zhou Wan in Qingdao had significantly higher levels of metal and trace organic contaminants among the seven sampling stations. Examination of the contaminant profiles suggests that PHCs originated from petrogenic sources, while both petrogenic and pyrolytic sources were important for PAHs. The generally high levels of metals and organochlorine compounds are probably the result of increasingly intense industrial activities along the east coast of China. An assessment of potential risks to human health due to consumption of the mussels was undertaken for the metals, PCBs, DDTs and chlordanes, and the results indicated that all metals, except Ni, could pose a health risk to heavy seafood consumers, while Hg appears to be of concern even for low level consumers.     

Heavy metals, polycyclic aromatic hydrocarbons and polychlorinated biphenyls in surface sediments of the Naples harbour (southern Italy)

The Naples's harbour is one of the largest and most important commercial and tourist port of the Mediterranean basin. It is located on the southeast coast of Italy and receives industrial and municipal wastewaters from the city of Naples. Due to its social and economic impact, a comprehensive assessment of levels and sources of contamination of bottom sediments in this area of the Mediterranean basin is essential to identify potential danger due to mobilization of contaminants produced by managing of the same sediments. In this study, superficial sediments collected from 189 sampling sites were analyzed for grain size, heavy metals (Cr, Cu, Ni, Pb, V, Zn, Co, Sn, Cd, Hg, As, Al and Fe), 16 priority polycyclic aromatic hydrocarbons (PAHs) and perylene and 38 individual polychlorinated biphenyl (PCB) congeners. Compared to the estimated local background, Cu, Zn, Pb, Cd, Sn and Hg show enrichment factors >3 and only Hg evidences a median value higher than the NOAA (effects range - median) guidelines. Principal component analysis allowed us to clearly discriminate two areas mainly affected by heavy metals contamination and influenced by different sources related to industrial, commercial and/or urban activities. Priority PAHs are predominantly represented by three-five-ring compounds with concentrations ranging between 9 and 31774 ng g(-1) and frequently higher than the NOAA ER-M index. A prevalent pyrolitic origin of PAH was assessed on the basis of the relative abundance of the different congeners and selected isomer ratios. The concentrations of PCBs, as sum of the 38 congeners, ranged from 1 to 899 ng g(-1), with a predominance of highly chlorinated (tetra- and penta-chlorobiphenyls) congeners. WHO-TEQ values, calculated for the PCDD-like PCB congeners, suggest a relatively high level of toxicity. Generally, the concentration of PAHs and PCBs were higher near the sites of intense industrial, shipping and/or commercial activities suggesting a direct influence of these sources on the pollutant distribution patterns.     

Accumulation and histopathological damage in the clam Ruditapes philippinarum and the crab Carcinus maenas to assess sediment toxicity in Spanish ports

The degree of contamination and toxicity in sediment from four Spanish ports (Cádiz, Huelva, Pasajes and Bilbao) was assessed in the present study. Two marine invertebrate species, the shore crab Carcinus maenas and the clam Ruditapes philippinarum, were exposed to the different sediments under laboratory conditions for 28 days. Relationships were developed among metal contamination (As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb and Zn) in sediments, metal accumulation in gill tissues and histopathological lesions in different biological tissues to assess sediment toxicity. A multivariate analysis approach was used to calculate sediment quality guidelines (SQGs) by linking metal concentration in sediments with histopathological lesions measured in the exposed organisms. The results showed significant contaminant accumulation and histopathological lesions due to As, Pb and Zn in sediments at the port of Huelva; As, Cr, Cu, Hg and Ni at the ports of Pasajes and Cádiz; and Cr and Hg at the port of Bilbao. The link between chemical concentration in sediments and histopathological lesions allowed the determination of SQGs for the chemicals As, Cd, Cu, Cr, Hg, Ni and Zn.     

The chemical response of particle-associated contaminants in aquatic sediments to urbanization in New England, U.S.A

Relations between urbanization and particle-associated contaminants in New England were evaluated using a combination of samples from sediment cores, streambed sediments, and suspended stream sediments. Concentrations of PAHs, PCBs, DDT, and seven trace metals (Cd, Cr, Cu, Hg, Ni, Pb, Zn) were correlated strongly with urbanization, with the strongest relations to percentage commercial, industrial, and transportation (CIT) land use. Average PAH and metal concentrations in the most urbanized watersheds were approximately 30 and 6 times the reference concentrations, respectively, in remote, undeveloped watersheds. One-quarter to one-half of sampling sites had concentrations of PAHs, Cu, Pb, or Zn above the probable effects concentration, a set of sediment quality guidelines for adverse effects to aquatic biota, and sediments were predicted to be toxic, on average, when CIT land use exceeded about 10%. Trends in metals in cores from urban watersheds were dominantly downward, whereas trends in PAHs in a suburban watershed were upward. A regional atmospheric-fallout gradient was indicated by as much as order-of-magnitude-greater concentrations and accumulation rates of contaminants in cores from an undeveloped reference lake in Boston compared to those from remote reference watersheds. Contaminant accumulation rates in the lakes with urbanization in their watersheds, however, were 1-3 orders of magnitude greater than those of reference lakes, which indicate the dominance of local sources and fluvial transport of contaminants to urban lakes. These analyses demonstrate the magnitude of urban contamination of aquatic systems and air sheds, and suggest that, despite reductions in contaminant emissions in urban settings, streams and lakes will decline in quality as urbanization of their watersheds takes place.     

Historical trends in persistent organic pollutants and metals recorded in sediment from Lake Ellasjøen, Bjørnøya, Norwegian Arctic

Ellasj?en receives contaminants from both atmospheric and biological transport (seabird guano). Historical trends of selected persistent organic pollutants and metals were determined by interpretation of down-core contaminant profiles in conjunction with sediment layer ages, determined by the (210)Pb method. Polychlorinated biphenyls (PCBs) and dichloro-diphenyl-trichloroethane and metabolites (DDTs) increased from about 1930 until 1970 (max. sum PCBs 71.8 ng/g dry weight (dw), max sum DDTs 4.0 ng/g dw), declining afterwards to 46.4 ng/g dw and 1.6 ng/g dw, respectively. Polybrominated diphenylethers (PBDEs) concentrations are increasing in Ellasj?en, reaching 0.73 ng/g dw in 2001. Hexabromocyclododekane (HBCD) was measured only in sediment from 1-2 cm depth (0.43 and 3.88 ng/g dw of alpha- and gamma-HBCD, respectively). Most metals (As, Cd, Co, Ni and Zn) showed a similar pattern as PCBs. No clear trends were observed for Cr, Pb or V. Mercury (Hg) has increased gradually since the beginning of the industrial era.     

Differential accumulation of mercury and other trace metals in the food web components of a reservoir impacted by a chlor-alkali plant (Flix, Ebro River, Spain): Implications for biomonitoring

Comparative studies of biomonitors of trace metal contamination are relatively scarce. We took advantage of a point source pollution in a reservoir (Flix, Spain) to compare trace metal (Hg, Pb, Cd, Se, As, Zn, Cu, Cr) bioaccumulation patterns among 16 food web components. Our results indicate that most organisms are suitable for Hg biomonitoring, whereas other metals are better monitored by only some of them. Biofilms and zebra mussel were the organisms with larger and more diverse biomonitoring capacity. However, we show that using groups of biomonitors increase the scope and strengths of the conclusions and specific goals can be better addressed. We conclude providing an overview of the strengths and weaknesses of the main organisms considered for biomonitoring trace metals in rivers and reservoirs.     

Trace metals assessment in water, sediment, mussel and seagrass species--validation of the use of Posidonia oceanica as a metal biomonitor

The accumulation of trace metals (Cd, Co, Cr, Hg, Ni and Pb) was measured in water, sediment, the mussel Mytilus galloprovincialis and the seagrass Posidonia oceanica. Samples were collected in three locations of the north-western Mediterranean (Canari, Livorno and Porto-Torres) which present different levels and sources of human impact. Analyses in the different compartments (water, sediment, M. galloprovincialis and P. oceanica) have allowed to identify Canari as the most Cd, Co, Cr and Ni contaminated site; Livorno as the most Hg contaminated and Porto-Torres as the most Pb contaminated. Furthermore, for the first time, metal concentrations found in P. oceanica have been compared with those found in the water column, in the sediment and in the recognized metal bio-indicator species M. galloprovincialis and the results obtained have led to the same conclusions. Thus, this study allows to validate the use of P. oceanica as metal biomonitor of coastal waters.     

Assessment of decadal changes in sediment contamination in a large connecting channel (Detroit River,North America)

Concentrations of selected heavy metals (Cd, Cu, Hg, Pb, Zn) and organic contaminants (PCBs, PAHs) were investigated in samples from the Detroit River (Great Lakes, North America) in 1999 and 2008/09 collected using a stratified random sampling design. Getis–Ord geospatial analysis was used to further establish locations of areas demonstrating significantly high and low contaminant concentrations in the river. Based on the stratified random sampling design, a majority of the examined metals and organic contaminants demonstrated little or no trends with respect to regional sediment concentrations and river-wide mass balances over the investigated time interval. The Getis–Ord analysis revealed local scales of contaminated and clean areas which did not conform to the original strata used in the geostatistical sampling design. It is suggested that geospatial analyses such as Getis–Ord be used in the design of future sediment quality surveys to refine locations of strata that can simultaneously address sediment recovery over system-wide, regional and local spatial scales.     

Sediment pollution and dynamic in the Mar Piccolo of Taranto (southern Italy): insights from bottom sediment traps and surficial sediments

Major and trace element, PAH, and PCB concentrations were measured in surface sediments and particles from sediment traps collected in the First and Second Basin of the Mar Piccolo (Gulf of Taranto) in two periods (June–July and August–September, 2013). The aim of the study was to evaluate pollution degree, sediment transport and particle redistribution dynamic within the area. Results confirm the higher contamination of sediments from the First Basin observed by previous researches, particularly for Cu, Hg, Pb, total PAHs, and total PCBs. Advective transport from the First to the Second Basin appears to be the leading transfer mechanism of particles and adsorbed contaminants, as evidenced by measured fluxes and statistical analyses of contaminant concentrations in surficial sediments and particles from sediment traps. Long-range selective transports of PAHs and microbial anaerobic degradation processes for PCBs have been also observed. These results are limited to a restricted time window but are consistent with the presence of transport fluxes at the bottom of the water column. This mechanism deserves further investigation and monitoring activities, potentially being the main responsible of pollutant delivering to the less contaminated sectors of the Mar Piccolo.     

Tidal salt marsh sediment in California, USA. Part 1: occurrence and sources of organic contaminants

Surface sediment samples (0-5 cm) from five tidal marshes along the coast of California, USA were analyzed for organic pollutants to investigate their relationship to land use, current distribution within marshes, and possible sources. Among the study areas, Stege Marsh, located in San Francisco Bay, was the most contaminated. Compared to San Francisco Bay, Stege Marsh had much higher levels of organic contaminants such as PCBs (polychlorinated biphenyls), DDTs, and chlordanes. At reference marshes (Tom's Point and Walker Creek in Tomales Bay), organic contaminants in sediments were very low. While PAHs (polycyclic aromatic hydrocarbons) were found at all of the study areas (22-13,600 ng g(-1)), measurable concentrations of PCBs were found only in the sediments from Stege Marsh (80-9,940 ng g(-1)). Combustion related (pyrogenic) high molecular weight PAHs were dominant in sediments from Stege and Carpinteria Marshes, while in sediments from Tom's Point and Walker Creek petroleum related (petrogenic) low molecular weight PAHs and alkyl-substituted PAHs were much more abundant than pyrogenic PAHs. PCB congener patterns in all of the Stege Marsh samples were the same and revealed that Aroclor 1248 was a predominant source. In all marshes, the sum of DDE and DDD accounted for more than 90% of total DDTs, indicating that DDT has degraded significantly. The ratios of p,p'-DDE to p,p'-DDD in sediments from Stege Marsh provide evidence of possible previous use of technical DDD. Chlordane ratios indicated that chlordanes have degraded slightly. Bis(2-ethylhexyl)phthalate (280-32,000 ng g(-1)) was the most abundant phthalate. The data indicates that Stege Marsh may be a source of contaminants that continue to be discharged into San Francisco Bay.     

SITE Demonstration of the Basic Extractive Sludge Treatment Process

The Superfund Innovative Technology Evaluation (SITE) Program, in cooperation with EPA Region 5, the Great Lakes National Program Office (GLNPO), and the U.S. Army Corps of Engineers (COE) planned and executed a pilot-scale evaluation of the Basic Extractive Sludge Treatment (B.E.S.T.®) process on sediment samples obtained from the Grand Calumet River in Gary, Indiana. Two separate sampling locations were selected based upon previous data. One location had sediments with total polychlorinated biphenyl (PCB) concentrations averaging 10 mg/kg, and total polynuclear aromatic hydrocarbon (PAH) concentrations averaging 520 mg/kg. The other location had sediments with average total PCB and PAH concentrations of 427 mg/kg and 72,000 mg/kg, respectively. The sediment samples were segregated by location, then screened, homogenized, and stored prior to treatment. A total of ten batches of sediments were treated (five for each sample location).

Results showed that of the samples which had low original contaminants concentrations, 96 percent of the PAHs and >99 percent of the PCBs were removed following seven sequential extractions. Treated samples which had high original contaminant concentrations were found to have removal efficiencies of >99 percentfor both PAHs and PCBs. Costs for applying this technology were estimated at $94.19/ton (assuming the system is on-line 80 percent of the time) excluding fixed costs associated with system mobilization/ demobilization and setup, and profit.     

Contamination in sediments, bivalves and sponges of McMurdo Sound, Antarctica

This study examined the concentrations of total hydrocarbons (THC), polychlorinated biphenyls (PCB), polyaromatic hydrocarbons (PAH), and trace metals (Cu, Zn, Cd, Pb, Hg and As) in marine sediments off Scott Base (NZ) and compared them with sediments near the highly polluted McMurdo Station (US) as well as less impacted sites including Turtle Rock and Cape Evans. The Antarctic mollusc, Laternula elliptica and three common sponge species were also analysed for trace metals. The mean THC concentration in sediments from Scott Base was 3 fold higher than the pristine site, Turtle Rock, but 10 fold lower than samples from McMurdo Station. McMurdo Station sediments also contained the highest concentrations of PAHs, PCBs and the trace metals, Cu, Zn, Pb, Cd and Hg. Copper was significantly higher in bivalves from McMurdo Station than other sites. Trace metal concentrations in sponges were generally consistent within sites but no spatial patterns were apparent.     

Endocrine-disrupting chemicals in coastal lagoons of the Po River delta: sediment contamination,bioaccumulation and effects on Manila clams

The large estuary that the River Po forms at its confluence into the Adriatic Sea comprises a multitude of transitional environments, including coastal lagoons. This complex system receives the nutrients transported by the River Po but also its load of chemical contaminants, which may pose a substantial (eco)toxicological risk. Despite the high ecological and economic importance of these vulnerable environments, there is a substantial lack of information on this risk. In light of the recent amendments of the European Water Framework Directive (2013/39/EU), the present study investigated the sediment contamination of six coastal lagoons of the Po delta and its effects on Manila clams (Ruditapes philippinarum), exposed in situ for 3 months. Sediment contamination and clam bioaccumulation of a wide range of chemicals, i.e. trace metals (Cd, Cr, Ni, Hg, Pb, As), polybrominated diphenyl ethers (PBDEs), alkylphenols (APs), organochlorine compounds (PCBs, DDTs), polycyclic aromatic hydrocarbons (PAHs) and organotins (TPhT, TBT), suggested a southward increase related to the riverine transports. Where the River Po influence was more direct, the concentrations of contaminants were higher, with nonylphenol and BDE-209 exceeding sediment quality guidelines. Biometric indicators suggested the influence of contamination on organism health; an inverse relationship between PBDEs in sediments and clam condition index has been found, as well as different biota-sediment accumulation factors (BSAFs) in the lagoons.     

Speciation of metals in contaminated sediments from Oskarshamn Harbor,Oskarshamn, Sweden

Bottom sediments in coastal regions have been considered the ultimate sink for a number of contaminants, e.g., toxic metals. In this current study, speciation of metals in contaminated sediments of Oskarshamn harbor in the southeast of Sweden was performed in order to evaluate metal contents and their potential mobility and bioavailability. Sediment speciation was carried out by the sequential extraction BCR procedure for As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn and the exchangeable (F1), reducible (F2), oxidizable (F3), and residual (R) fractions were determined. The results have shown that Zn and Cd were highly associated with the exchangeable fraction (F1) with 42–58 % and 43–46 %, respectively, of their total concentrations in the mobile phase. The assessment of sediment contamination on the basis of quality guidelines established by the Swedish Environmental Protection Agency (SEPA) and the Italian Ministry of Environment (Venice protocol for dredged sediments) has shown that sediments from Oskarshamn harbor are highly contaminated with toxic metals, especially Cu, Cd, Pb, Hg, As, and Zn posing potential ecological risks. Therefore, it is of crucial importance the implementation of adequate strategies to tackle contaminated sediments in coastal regions all over the world.     

A 40+ year record of Cd,Hg, Pb,and U deposition in sediments of Patroon Reservoir,Albany County,NY, USA

Sediments of the Patroon Creek watershed (33 km(2)) are known to contain significant concentrations of heavy metals derived from two industrial sites within the watershed. Mercury Refining, Inc (Mereco) has stored and recycled Hg from 1955 to the present day, and National Lead Industries (NLI) manufactured aircraft components containing Cd, Pb, and U from 1958 to 1984. Here we present the first record of heavy metal deposition as preserved in a 3-m long sediment core collected in 1999 from Patroon Reservoir, a small water body (1.3 ha) downstream of the industrial sites. Bulk sediment samples were collected from the core at 0.05-m intervals and analyzed for total Cd, Pb, and U by ICP-MS and total Hg by CVAAS. Total Hg increases from less than 1 mg kg(-1) (dw) below 1.68 m, to a maximum of 6.2 mg kg(-1) at 0.80 m, and then declines to the sediment-water interface. Total Cd, Pb, and U concentrations increase abruptly above 1.68 m to maximum values of 25, 320, and 3600 mg kg(-1) (dw), respectively, and then decline gradually upwards. By correlating metal profiles with industrial history, we conclude that the 1.68 m horizon was deposited no earlier than 1958, the beginning of aircraft component manufacturing at NLI. The average, apparent sedimentation rate within the reservoir has a minimum value of approximately 0.04 m year(-1) for the 41-year period from 1958 to 1999. In the interval 0--1.68 m, average concentrations of Cd, Hg, Pb, and U are 1.69, 1.50, 461, and 13 mg kg(-1), respectively. These levels are comparable with other lake, reservoir and stream sediments that have been moderately to severely impacted by industrial pollution and are above levels expected to be detrimental to aquatic organisms.     

Heavy metal concentrations in marine molluscs from the Moroccan coastal region

Mussels (Mytilus galloprovincialis), clams (Venerupis decussatus) and oysters (Crassostrea gigas) were sampled seasonally during 2004-2005, from different coastal environments of Morocco in order to measure their accumulated heavy metal concentrations. The concentrations of Hg and Pb were determined by AFS and ICP-MS methods, respectively, whilst the remaining metals (Cd, Cr, Cu, Mn, Zn and Ni) were quantified by AAS. The soft tissue concentrations of the mussels were on average 7.2 mg kg(-1) (Cd), 9.6 mg kg(-1) (Pb), 0.6 mg kg(-1) (Hg), 26.8 mg kg(-1) (Cu), 8.8 mg kg(-1) (Cr), 292 mg kg(-1) (Zn), 20.8 mg kg(-1) (Mn) and 32.8 mg kg(-1) (Ni). The highest tissue heavy metal concentrations were recorded in the south from the industrial area of Jorf Lasfar. The relationships between metal concentration and season in each species showed very similar annual profiles with a peak observed around spring-summer. Statistical analysis indicated that different species showed different bioaccumulation of metals depending on study site and season.     

Development of freshwater sediment management standards for organic matters, nutrients, and metals in Korea

Korean water quality managers are required to promptly develop national assessment standards for freshwater sediment quality due to the Four Major River Restoration Project in Korea in 2009. We conducted this study to develop sediment management standards (SMSs), determining obviously and severely polluted sediment, which could have adverse impacts on water quality and aquatic ecosystem. The SMSs values were derived from the 95th percentile of concentration distribution for organic matter and nutrients in sediment quality database. For the SMSs of metals, foreign sediment quality guidelines (SQGs) were adopted. As a result, 13 % for loss on ignition (LOI), 1,600 mg/kg for total phosphorus (TP), and 5,600 mg/kg for total nitrogen (TN) were set as the SMSs for freshwater sediment in Korea. These values were higher than the range of heavily polluted sediment from USEPA Region 5 guideline derived by the similar approaches for the Great Lakes harbor sediments, and similar or lower than the severe effect level (SEL) from provincial sediment quality guideline (PSQG) of Ontario, Canada by screening level concentration (SLC) approach. However, SMSs in the present study are appropriate considering the concentration ranges and the Korean SMSs’ definition for freshwater sediments in Korea. The Puget Sound marine sediment cleanup screening level (CSL) in Washington State, USA were adopted as the Korean SMSs for As (93 mg/kg), Cd (6.7 mg/kg), Cr (270 mg/kg), Cu (390 mg/kg), Pb (530 mg/kg), and Zn (960 mg/kg) in freshwater sediments. Hg concentration (0.59 mg/kg) of CSL was too low to determine the polluted freshwater sediments in Korea, and the SEL of Ontario, Canada for mercury concentration (2 mg/kg) was selected as the SMS for Hg. These values were found reasonable through the assessment of applicability with the datasets from locations directly affected by obvious point sources. These results indicate that SMSs for organic matter, nutrient, and metals derived within the present study can successfully determine obviously and severely polluted sediment in Korea. However, the SMSs have limits to specifically determine the effects of polluted sediment on water quality and aquatic ecosystem in Korea. Thus, we will revise and specify SMSs considering those effects and further sediment quality assessment framework in the near future.     

Comprehensive assessment of toxic metals in urban and suburban street deposited sediments (SDSs) in the biggest metropolitan area of China

A set of toxic metals, i.e. As, Hg, Pb, Cd, Cu, Zn, Ni and Cr, in urban and suburban SDSs were investigated comparatively in the biggest metropolitan area of China, Shanghai. Results showed that all of the metals except As were accumulated greatly, much higher than background values. Geo-accumulation index indicated that metal contamination in urban SDSs was generally heavier than that in suburban SDSs. Potential ecological risk index demonstrated that overall risks caused by metals were considerable. Cd contributed 52% to the overall risk. Multivariate statistical analysis revealed that in urban SDSs, Zn, Ni, Cd, Pb, Cu and Cr were related to traffic and industry; coal combustion led to elevated levels of Hg; soil parent materials controlled As contents. In suburban SDSs, Pb, Cu, As and Cd largely originated from traffic pollution; Zn, Ni and Cr were associated with industrial contaminants; Hg was mainly from domestic solid waste.     

Pre-industrial sediment concentrations of metals: insights from the Venice lagoon (Italy)

Environmental Science and Pollution Research - This study investigated the occurrence of selected metals and metalloids (As, Cd, Cr, Cu, Hg, Ni, Pb, Zn) in radio-dated sediment cores from a coastal...     

Bench-scale testing of selected remediation alternatives for contaminated sediments

The Assessment and Remediation of Contaminated Sediments (ARCS) Program within the U.S. Environmental Protection Agency's Great Lakes National Program Office (GLNPO) contained a component for demonstrating and evaluating sediment remediation technologies. Toward this end, bench-scale tests of solvent extraction, thermal desorption, and wet air oxidation technologies were conducted. Contaminated sediments were tested from the Grand Calumet River, Indiana; Buffalo River, New York; Saginaw River, Michigan; and Ashtabula River, Ohio. The primary contaminants of concern in these sediments were polychlorinated biphenyls (PCBs) and polynuclear aromatic hydrocarbons (PAHs). The solvent extraction tests were conducted with sediments from the Grand Calumet, Buffalo, and Saginaw rivers. The thermal desorption studies were conducted with sediments from the Grand Calumet, Buffalo, and Ashtabula rivers. The wet air oxidation testing was performed with the Grand Calumet River sediment. Raw sediment contaminant concentrations ranged from 0.32-21.9 mg/kg dry mass for PCBs and 2.70-266 mg/kg dry mass for PAHs. PCB removal or destruction efficiencies ranged from approximately 6-99%. PAH removal or destruction efficiencies ranged from 65-99%. Mass balance closures ranged from 40-99% for solids; 59-139% for water; 29-3500% for oil; 16-129% for PCBs; and 69-3170% for PAHs.