Heterogeneous photocatalytic degradation of picloram, dicamba, and floumeturon in aqueous suspensions of titanium dioxide

Heterogeneous photocatalytic degradation of three-selected herbicide derivatives: (1) picloram (4-Amino-3,5,6-trichloropyridine-2-carboxylic acid, (2) dicamba (2-Methoxy-3,6-dichlorobenzoic acid, and (3) floumeturon (N,N-Dimethyl-N-[3-(trifluoromethyl)phenyl]-urea) has been investigated in aqueous suspensions of titanium dioxide under a variety of conditions. The degradation was studied by monitoring the change in substrate concentration employing UV spectroscopic technique and decrease in total organic carbon (TOC) content as a function of irradiation time under a variety of conditions. The degradation of the herbicide was studied under different conditions such as pH, catalyst concentration, substrate concentration, different types of TiO2, and in the presence of electron acceptors such as hydrogen peroxide (H2O2), potassium bromate (KBrO3), and ammonium persulphate (NH4)2S2O8 besides molecular oxygen. The degradation rates were found to be strongly influenced by all the above parameters. The photocatalyst Degussa P25 was found to be more efficient as compared with other photocatalysts in the case of dicamba (2) and floumeturon (3), whereas Hombikat UV100 was found to be better for the degradation of picloram (1). The herbicide picloram (1) was found to degrade faster as compared to dicamba (2) and floumeturon (3). The degradation products were analyzed by gas chromatography-mass spectrometry (GC/MS) technique, and plausible mechanisms for the formation of products have been proposed.     

Heterogeneous photocatalysed reaction of three selected pesticide derivatives, propham, propachlor and tebuthiuron in aqueous suspensions of titanium dioxide

Heterogeneous photocatalysed reaction of three selected pesticide derivatives such as propham (1), propachlor (2) and tebuthiuron (3) has been investigated in aqueous suspensions of titanium dioxide by monitoring the change in substrate concentration employing UV Spectroscopic analysis and depletion in Total Organic Carbon (TOC) content as a function of irradiation time. The degradation kinetics was studied under different conditions such as pH, catalyst concentration, substrate concentration, different types of TiO(2) and in the presence of electron acceptors such as hydrogen peroxide (H(2)O(2)), potassium bromate (KBrO(3)) and ammonium persulphate (NH(4))(2)S(2)O(8) besides molecular oxygen. The degradation rates were found to be strongly influenced by all the above parameters. The photocatalyst Degussa P25 was found to be more efficient as compared with other photocatalysts. The pesticide derivative propham (1) was found to degrade faster as compared to propachlor (2) and tebuthiuron (3). An attempt has also been made to identify the products formed during the photooxidation process through GC/MS analysis technique. All the model pollutants showed the formation of several intermediate products, which were identified on the basis of molecular ion and mass spectrometric fragmentation pattern. A probable mechanism for the formation of the products has been proposed.     

H4SiW12O40/TiO2/beads光催化降解亚甲基蓝的研究

以钛酸四丁酯为原料,空心微珠为载体,采用溶胶-凝胶法制备TiO2/beads光催化剂载体,然后浸渍法制备出H4SiW12O40/TiO2/beads表面负载修饰型复合光催化剂,并运用SEM、XRD、FT-IR和DRS对催化剂进行表征和分析。研究了H4SiW12O40/TiO2/beads对亚甲基蓝降解的光催化活性,考察了光强度、pH值、曝气量、底物浓度和催化剂用量等对催化效率的影响。实验结果表明,在中性条件下,H4SiW12O40/TiO2/beads催化剂的投加量为0.25 g/L,浓度为7.5 mg/L的亚甲基蓝溶液在250 W的紫外灯和600 W的可见光灯下光照60 min降解率分别可达到94.5%和55%。     

Photocatalytic degradation of isoproturon herbicide over TiO2/Al-MCM-41 composite systems using solar light

The present investigation covers immobilization of TiO2 using a simple solid state dispersion technique over mesoporous Al-MCM-41 support for the treatment of isoproturon herbicide. Catalysts are characterized by XRD, X-ray photo electron spectroscopy (XPS), surface area, UV-Vis diffused reflectance spectra (DRS), SEM and TEM. A detailed photocatalytic degradation study of isoproturon under solar light in aqueous suspensions is reported. The 10 wt% TiO2/Al-MCM-41 composite system found to be optimum with high degradation activity. The reaction follows pseudo-first order kinetics. The parameters like TiO2 loading over Al-MCM-41, amount of catalyst, concentration of substrate, pH effect, durability of the catalyst, activity comparison of TiO2 and Al-MCM-41 supported system are studied. The mineralization of isoproturon is monitored by TOC. Based on the degradation products detected through LC-MS, a plausible degradation mechanism is proposed. The data indicates that TiO2/Al-MCM-41 composite system is an effective photocatalyst for treatment of isoproturon in contaminated water.     

H4SiW12O40/TiO2/beads光催化降解亚甲基蓝的研究

以钛酸四丁酯为原料，空心微珠为载体，采用溶胶凝胶法制备TiO₂/beads光催化剂载体，然后浸渍法制备出H₄SiW₁₂O₄₀/TiO₂/beads表面负载修饰型复合光催化剂，并运用SEM、XRD、FT-IR和DRS对催化剂进行表征和分析。研究了H₄SiW₁₂O₄₀/TiO₂/beads对亚甲基蓝降解的光催化活性，考察了光强度、pH值、曝气量、底物浓度和催化剂用量等对催化效率的影响。实验结果表明，在中性条件下，H₄SiW₁₂O₄₀/TiO₂/beads催化剂的投加量为0.25 g/L，浓度为7.5 mg/L的亚甲基蓝溶液在250 W的紫外灯和600 W的可见光灯下光照60 min降解率分别可达到94.5%和55%。     

Effect of ZnFe2O4 doping on the photocatalytic activity of TiO2

The photocatalytic oxidation of the organic pollutants with the TiO2 as photocatalyst has been widely studied in the world, and many achievements have been got. The degradation of pollutants is highly related with the photocatalytic activity of TiO2. It is demonstrated that doping ions or oxides to TiO2 is one way to enhance the photocatalytic activity of TiO2. In this paper, the ZnFe2O4-doped TiO2 nanoparticles were prepared from butyl titanate by a sol-gel method and characterized by means of X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results showed that when TiO2 was doped with ZnFe2O4, its particle size will decrease and its crystal structure will partly transform from anatase to rutile. The photocatalytic activity of the elaborated powders was studied following the degradation of Rhodamine B. The results showed that doping ZnFe2O4 to TiO2 will enhance the photocatalytic activity of TiO2 and that ZnFe2O4-doped TiO2 in the coexistence of anatase and rutile has higher efficiency for the degradation of Rhodamine B than that in the anatase phase alone. Also the different role of O2 in the direct photolysis and photocatalysis of Rhodamine B was discussed.     

固定化催化剂TiO2膜光催化降解三氯乙醛的研究

研究了负载于玻璃上的固定化催化剂TiO2膜光催化降解水中三氯乙醛的效果,探讨了TiO2膜光催化降解三氯乙醛的机理,考察了溶液pH值和三氯乙醛初始浓度埘TiO2膜光催化降解三氯乙醛的影响,并研究了固定化催化剂TiO2膜光催化降解三氯乙醛的动力学.结果表明,固定化催化剂TiO2膜光催化降解水中三氯乙醛的效果良好,当三氯乙醛初始浓度为2.25 mg/L时,在紫外光照时间3 h下,三氯乙醛的降解率高达100%.在相司紫外光照时间下,三氯乙醛的光催化降解率随着三氯乙醛初始浓度的增大而下降.在溶液pH=6.5时,三氯乙醛的降解效率最高.固定化催化剂TiO2膜光催化降解三氯乙醛的反应遵循一级反应动力学,反应速率常数随三氯乙醛初始浓度的增大而减小.     

TiO2纳米管催化降解4，4’-二溴联苯的影响因素和动力学研究

利用TiO₂纳米管催化降解水中的4，4’-二溴联苯，对催化降解过程和影响因素进行研究。结果表明，TiO₂纳米管对其有较高的催化降解效率且降解过程符合Langmuir-Hinshelwood动力学模式。不同光源、4，4’-二溴联苯的初始浓度、纳米管添加量和pH值对催化降解过程都有较大影响，其中pH值的影响最为明显。反应液在中性状态下的降解率明显低于pH=1或11的情况。在pH=1时，4，4’-二溴联苯的降解率达86%。     

Performance of photocatalytic reactors using immobilized TiO2 film for the degradation of phenol and methylene blue dye present in water stream

TiO2 thin film photocatalyst was successfully synthesized and immobilized on glass reactor tube using sol-gel method. The synthesized TiO2 coating was transparent, which enabled the penetration of ultra-violet (UV) light to the catalyst surface. Two photocatalytic reactors with different operating modes were tested: (a) tubular photocatalytic reactor with re-circulation mode and (b) batch photocatalytic reactor. A new proposed TiO2 synthesized film formulation of 1 titanium isopropoxide: 8 isopropanol: 3 acetyl acetone: 1.1 H2O: 0.05 acetic acid (in molar ratio) gave excellent photocatalytic activity for degradation of phenol and methylene blue dye present in the water. The half-life time, t1/2 of photocatalytic degradation of phenol was 56 min at the initial phenol concentration of 1000 microM in the batch reactor. In the tubular photocatalytic reactor, 5 re-circulation passes with residence time of 2.2 min (single pass) degraded 50% of 40-microM methylene blue dye. Initial phenol concentration, presence of hydrogen peroxide, presence of air bubbling and stirring speed as the process variables were studied in the batch reactor. Initial methylene blue concentration, pH value, light intensity and reaction temperature were studied as the process variables in the tubular reactor. The synthesized TiO2 thin film was characterized using SEM, XRD and EDX analysis. A comparative performance between the synthesized TiO2 thin film and commercial TiO2 particles (99% anatase) was evaluated under the same experimental conditions. The TiO2 film was equally active as the TiO2 powder catalyst.     

纳米TiO2/EP光催化降解罗丹明B废水的研究

通过溶胶-凝胶法制备出可漂浮于水面的膨胀珍珠岩(EP)负载型TiO2,研究其在水中对罗丹明B(RB)的去除效果、吸附降解动力学以及最佳工艺条件,并研究其多次回收再生后的降解效果。结果表明,浸渍3次的负载型TiO2光催化活性最高,回收5次后活性变化很小,降解率下降不到8%;光催化剂用量为0.2 g,20 mL初始浓度为10 mg/L和15mg/L RB溶液光照6 h后降解率分别达98%和74%。在实验浓度范围内,该光催化反应可用一级反应动力学方程描述。     

Photocatalytic degradation of mixed gaseous carbonyl compounds at low level on adsorptive TiO2/SiO2 photocatalyst using a fluidized bed reactor

An adsorptive silica-supported titania photocatalyst TiO(2)/SiO(2) was prepared by using nanosized titania (anatase) immobilized on silica gel by the sol-gel technique with the titanium tetra isopropoxide as the main raw material and acetic acid as the acid catalyst. Meanwhile the structure and properties of the TiO(2)/SiO(2) photocatalyst were studied by means of many modern analysis techniques such as TEM, XRD, and BET. Gas-solid heterogeneous photocatalytic decomposition of four carbonyl compounds mixture at low concentration levels over ultraviolet irradiated TiO(2)/SiO(2) photocatalyst were carried out with high degradation efficiencies in a coaxial triple-cylinder-type fluidized bed photocatalytic reactor, which provided efficient continuous contact of ultraviolet photons, silica-supported titania photocatalyst, and gaseous reactants. Experimental results showed that the photocatalyst had a high adsorption performance and a good photocatalytic activity for four carbonyl compounds mixture. Some factors influencing the photocatalytic decomposition of the mixed carbonyl compounds, i.e. the gas flowrate, relative humidity, concentration of oxygen, and illumination time, were discussed in detail. It is found that the photocatalytic reaction rate of four carbonyl compounds decreased in this order: propionaldehyde, acetone, acetaldehyde and formaldehyde.     

TiO2光催化氧化降解乳酸的工艺及机理研究

以TiO2为催化剂、紫外灯为光源对乳酸进行光催化降解实验,考察了乳酸初始浓度、TiO2用量、反应时间、曝气方式等因素对乳酸降解率的影响,并在此基础上应用正交实验对降解条件进行优化,同时对乳酸的降解机理进行了探索研究。实验结果表明：以300 W紫外汞灯为光源,在乳酸初始浓度为0.5 g/L、TiO2量为0.20 g/L、反应时间120 min、持续通入空气鼓泡的条件下,乳酸降解效果最佳,乳酸降解率为99.9%;降解12 h总有机碳去除率达91.2%。乳酸光催化降解的反应途径为：乳酸脱羧生成乙醇,乙醇被氧化生成乙醛,进而氧化为乙酸,所有的中间产物被继续降解,最终矿化为CO2和H2O等小分子物质。     

TiO_2/AC复合催化剂的制备及其对六氯苯的光催化降解性能研究

以颗粒活性炭（AC）和钛酸丁酯为原料,采用微波辐射法制备TiO2/AC复合光催化剂,并对制备的催化剂进行了表征;采用该催化剂对六氯苯进行光催化降解,确定了六氯苯降解的最佳工艺条件,并就几种外加试剂对TiO2/AC光催化降解六氯苯的强化作用进行了探讨。结果表明,制备的催化剂中TiO2均匀分布在活性炭表面、呈单一的锐钛矿晶型,晶粒生长完善。该催化剂催化降解六氯苯的最佳工艺条件为：pH值为5、TiO2负载量为18.2%、TiO2/AC投加量为0.4 g/L、反应时间为60 min。在此条件下,六氯苯降解效率达90.3%。添加适量的H2O2、AgNO3、K2S2O8、KIO4和KMnO4均能提高TiO2/活性炭对六氯苯的光催化降解效率。5种外加试剂的适宜添加量分别为0.3%、1.0、1.0、0.1和0.1 mmol/L,对TiO2/AC光催化效率的强化作用大小顺序为：H2O2〉AgNO3〉K2S2O8〉KMnO4〉KIO4。     

Photocatalytic oxidation of pesticide rinsate

Pesticide rinsate has been considered as one of the major threats for the environment. In this study, photocatalysts such as TiO2 and O3 were used to promote the efficiency of direct UV photolysis to prevent such wastewater pollution. Carbofuran (a carbamate pesticide) and mevinphos (an organophosphate pesticide) with a concentration of 100 mg/L were selected as the test pesticide rinsates. Parent pesticide compound, COD, and microtoxicity analysis were employed to investigate the effect of photocatalyst on the degradation efficiency of pesticide in rinsate. It was found that the photocatalytic oxidation process (UV/O3, UV/TiO2) showed much higher COD removal and microtoxicity reduction efficiency for pesticide rinsate than did direct UV photolysis under the imposed conditions, suggesting that photocatalytic oxidation processes such as UV/O3 and UV/TiO2 could be a better alternative to treat pesticide rinsate. In addition, it was noted that increasing the initial pH of mevinphos rinsate to a basic level was required to reach higher COD removal efficiency and positive microtoxicity reduction efficiency while it was not necessary for the treatment of carbofuran rinsate.     

纳米TiO_2/EP光催化降解罗丹明B废水的研究

通过溶胶-凝胶法制备出可漂浮于水面的膨胀珍珠岩（EP）负载型TiO2,研究其在水中对罗丹明B（RB）的去除效果、吸附降解动力学以及最佳工艺条件,并研究其多次回收再生后的降解效果。结果表明,浸渍3次的负载型TiO2光催化活性最高,回收5次后活性变化很小,降解率下降不到8%;光催化剂用量为0.2 g,20 mL初始浓度为10 mg/L和15mg/L RB溶液光照6 h后降解率分别达98%和74%。在实验浓度范围内,该光催化反应可用一级反应动力学方程描述。     

Study on the photocatalytic degradation of glyphosate by TiO(2) photocatalyst

In this paper, the photocatalytic degradation of glyphosate selected as the deputy of organic pollutant in aqueous solution with TiO(2) powder as a photocatalyst has been studied. The effects of various parameters, such as the amount of the photocatalyst, illumination time, initial pH value, electron acceptors, metal ions, and anions on the photocatalytic degradation of glyphosate were investigated. From the studies, the best condition for the effect of the parameters on the photocatalytic degradation of glyphosate was obtained. The results show that the optimum amount of the photocatalyst used is 6.0 g l(-1) for the photocatalytic reactions. The photodegradation efficiency of glyphosate increases with the increase of the illumination time. With the addition of Fe(3+), Cu(2+), H(2)O(2), K(2)S(2)O(8) or KBrO(3), the photocatalytic degradation of glyphosate is accelerated. However, with the addition of Na(+), K(+), Mg(2+), Ca(2+), Zn(2+), Co(2+) and Ni(2+), or with the addition of trace amounts of Cl(-), Br(-), SO(4)(2-), there are no obvious effects on the reactions. Acidic or alkaline mediums are favorable for the photocatalytic degradation of glyphosate. The possible roles of the additives on the reactions and the possible mechanisms of effect were discussed.     

TiO2膜光催化降解4，4’-二溴联苯的研究

研究了负载于玻璃上的固定化催化剂TiO2膜光催化降解水中4，4’-二溴联苯（4，4’-DBB）的效果，考察了溶液pH值和4，4’-DBB初始浓度等对TiO2膜光催化降解4，4’-DBB的影响，探讨了降解机理。结果表明，TiO2膜光催化降解水中4，4’-DBB的效果良好，紫外光照射8h，初始浓度为4mg／L的4，4’-DBB的降解率高达94％，降解速率随着4，4’-DBB初始浓度的增大而下降。在溶液pH：1时，4，4’-DBB的降解效率最高。超声的加入使降解反应的速率加快。经拟合发现4，4’-DBB的降解符合拟一级反应规律，并推导出动力学方程。     

Degradation of short-chain alkyl- and alkanolamines by TiO2- and Pt/TiO2-assisted photocatalysis

The photooxidation of C2H5NH2, (C2H5)2NH, HOC2H4NH2, (HOC2H4)2NH and (HOC2H4)3N using TiO2 and Pt/TiO2 as photocatalysts has been investigated. A laboratory set up was designed and a study on the influence of the concentration of the photocatalyst, the pH-value and the structure of the amine performed. The photocatalytic process was optimized with respect to the concentrations of the model substances during degradation. The decrease of the amine concentrations was found to be maximum at a pH of 10. The time-dependence of the formation of cationic breakdown products, such as NH3/NH4 and short-chain alkyl- and alkanolamines was studied by analyses with single column ion chromatography. The experimental data show that the photodegradation follows a Langmuir-Hinshelwood kinetic. The mineralization of the model substances also was monitored by measurements of the decrease of the TOC and of the formation of NO2 and NO3. The different mineralization efficiencies for the model substances studied are discussed with regard to their structure and adsorption behaviour on the photocatalyst. A possible breakdown mechanism involving the electrophilic attack of the hydroxyl radical is given. The applicability of the TiO2-assisted photocatalytic degradation of C2H5NH2 and (C2H5)2NH was tested at the pilot plant-scale with real solar radiation. The degradation rates and products obtained were similar to those found in the laboratory experiments.     

Photocatalytic oxidation of volatile organic compounds using fluorescent visible light

Photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) is a highly attractive alternative technology for purification and deodorization of indoor air. The main objectives of this study were to demonstrate that a common fluorescent visible light (FVL) lamp can be used to effectively remove by PCO low concentrations of VOCs from slightly contaminated air and to provide some fundamental and technical details on the process. The target VOC was n-butanol, which is a standard reference odorant. Its PCO was studied under a long residence time in a 3.7-L cylindrical reactor with commercial titanium dioxide (TiO2) as the reference photocatalyst and using mostly FVL for illumination. For comparison only, a UV (black) light lamp was used. The gas-phase products were detected and quantified online by gas chromatography (GC). The effects of reactor residence time, of inlet concentration, and of the relative light intensity on the efficiency of the process were also evaluated. At a high n-butanol concentration (0.1 vol %), butanal and propanal were identified as the intermediate products of the process; ethanal appeared when the initial concentration was < or = 850 ppm(v). This indicates that PCO leading to CO2 and H2O is relatively slow and proceeds in a stepwise manner. Although the efficiency of the process with an FVL lamp was significantly lower than when using a UV black light, complete PCO of low concentrations was achieved for 100 ppm(v). In a search for a material with photoactivation extended to higher wavelengths or increased photoactivity, several samples of transition metal- or silver ion-doped (2 atomic %) TiO2 as well as SrTi(1-x-)Fe(x)O3 (x = 0.1 and 0.15) perovskites were included in the study. None of these materials was more active than pure TiO2. The results of this study open new horizons in the area of in door air quality (IAQ) control.     

Heterogeneous photocatalytic degradation of prometryn in aqueous solutions under UV-Vis irradiation

In this study, the heterogeneous photocatalytic degradation of prometryn using TiO(2) as photocatalyst was investigated. The main objectives of the study were: (I) to evaluate the kinetics of the pesticide disappearance, (II) to compare the photocatalytic efficiency of two different types of TiO(2), (III) to examine the influence of various parameters such as initial concentration of pesticide or catalyst and presence of oxidants (H(2)O(2) and K(2)S(2)O(8)), (IV) to evaluate the degree of mineralization and (V) to assess the detoxification efficiency of the studied processes. The experiments were carried out in a 500 ml pyrex UV reactor equipped with a 125 W high-pressure mercury lamp surrounded by a pyrex filter blocking wavelengths below 290 nm. Prometryn concentration was determined using HPLC. It was found that the degradation of the pesticide follows the first order kinetics according to the Langmuir-Hinshelwood model. Parameters like the type and concentration of the catalyst affect the degradation rate. A synergistic effect was observed when an oxidant was added in the TiO(2) suspensions increasing the reaction rate of photodegradation. In order to examine the extent of pesticide mineralization, DOC measurements were carried out. After 6h of illumination, mineralization was achieved up to almost 70%. The toxicity of the treated solution was evaluated using the Microtox test based on the luminescent bacteria Vibrio fisheri, in order to compare the acute toxicity of prometryn and its photoproducts. The detoxification efficiency was found to be dependent on the studied system and it did not follow the rate of pesticide disappearance.