Bioaccumulation and trophic transfer of mercury in a food web from a large, shallow, hypereutrophic lake (Lake Taihu) in China

Purpose

Due to the fast development of industry and the overuse of agrichemicals in past decades, Lake Taihu, an important source of aquatic products for Eastern China, has simultaneously suffered mercury (Hg) contamination and eutrophication. The objectives of this study are to understand Hg transfer in the food web in this eutrophic, shallow lake and to evaluate the exposure risk of Hg through fish consumption.

Methods

Biota samples including macrophytes, sestons, benthic animals, and fish were collected from Lake Taihu in the fall of 2009. The total mercury (THg), methyl mercury (MeHg), ??¹³C and ??¹⁵N in the samples were measured.

Results and discussion

The signature for ??¹⁵N increased with the trophic levels. Along with a diet composed of fish, the significant relationship between the ??¹³C and ??¹⁵N indicated that a pelagic foraging habitat is the dominant pathway for energy transfer in Lake Taihu. The concentrations of THg and MeHg in the organisms varied dramatically by ??3 orders of magnitude from primary producers (macrophytes and sestons) to piscivorous fish. The highest concentrations of both THg (100 ng g^?1) and MeHg (66 ng g^?1), however, were lower than the guideline of 200 ng g^?1 of MeHg for vulnerable populations that is recommended by the World Health Organization (WHO). The daily intake of THg and MeHg of 92 and 56 ng day^?1 kg^?1 body weight, respectively, was generally lower than the tolerable intake of 230 ng day^?1 kg^?1 body weight for children recommended by the Joint FAO/WHO Expert Committee on Food Additives. Significant relationships between the ??¹⁵N and the logarithm of THg and MeHg showed an obvious biomagnification of Hg along the food web. The logarithmic bioaccumulation factor of MeHg in the fish (up to 5.7) from Lake Taihu, however, was relatively low compared to that of other aquatic ecosystems.

Conclusion

Health risk of exposure to Hg by consumption of fish for local residents is relatively low in the Lake Taihu area. Dilution of Hg levels in the phytoplankton induced by eutrophication is a possible factor inhibiting accumulation of MeHg in fish in eutrophic Lake Taihu.     

Temporal variations of atmospheric aerosol in four European urban areas

Purpose

The concentrations of PM₁₀ mass, PM_2.5 mass and particle number were continuously measured for 18 months in urban background locations across Europe to determine the spatial and temporal variability of particulate matter.

Methods

Daily PM₁₀ and PM_2.5 samples were continuously collected from October 2002 to April 2004 in background areas in Helsinki, Athens, Amsterdam and Birmingham. Particle mass was determined using analytical microbalances with precision of 1 ??g. Pre- and post-reflectance measurements were taken using smoke-stain reflectometers. One-minute measurements of particle number were obtained using condensation particle counters.

Results

The 18-month mean PM₁₀ and PM_2.5 mass concentrations ranged from 15.4 ??g/m³ in Helsinki to 56.7 ??g/m³ in Athens and from 9.0 ??g/m³ in Helsinki to 25.0 ??g/m³ in Athens, respectively. Particle number concentrations ranged from 10,091 part/cm³ in Helsinki to 24,180 part/cm³ in Athens with highest levels being measured in winter. Fine particles accounted for more than 60% of PM₁₀ with the exception of Athens where PM_2.5 comprised 43% of PM₁₀. Higher PM mass and number concentrations were measured in winter as compared to summer in all urban areas at a significance level p?Conclusions Significant quantitative and qualitative differences for particle mass across the four urban areas in Europe were observed. These were due to strong local and regional characteristics of particulate pollution sources which contribute to the heterogeneity of health responses. In addition, these findings also bear on the ability of different countries to comply with existing directives and the effectiveness of mitigation policies.     

Modelling the adsorption of mercury onto natural and aluminium pillared clays

Introduction

The removal of heavy metals by natural adsorbent has become one of the most attractive solutions for environmental remediation. Natural clay collected from the Late Cretaceous Aleg formation, Tunisia was used as a natural adsorbent for the removal of Hg(II) in aqueous system.

Methods

Physicochemical characterization of the adsorbent was carried out with the aid of various techniques, including chemical analysis, X-ray diffraction, Fourier transform infrared and scanning electron micrograph. Batch sorption technique was selected as an appropriate technique in the current study. Method parameters, including pH, temperature, initial metal concentration and contact time, were varied in order to quantitatively evaluate their effects on Hg(II) adsorption onto the original and pillared clay samples. Adsorption kinetic was studied by fitting the experimental results to the pseudo-first-order and pseudo-second-order kinetic models. The adsorption data were also simulated with Langmuir, Freundlich and Temkin isotherms.

Results

Results showed that the natural clay samples are mainly composed of silica, alumina, iron, calcium and magnesium oxides. The sorbents are mainly mesoporous materials with specific surface area of <250 m² g^?1. From the adsorption of Hg(II) studies, experimental data demonstrated a high degree of fitness to the pseudo-second-order kinetics with an equilibration time of 240 min. The equilibrium data showed the best model fit to Langmuir model with the maximum adsorption capacities of 9.70 and 49.75 mg g^?1 for the original and aluminium pillared clays, respectively. The maximum adsorption of Hg(II) on the aluminium pillared clay was observed to occur at pH 3.2. The calculated thermodynamic parameters (?G°, ?H° and ?S°) showed an exothermic adsorption process. The entropy values varied between 60.77 and 117.59 J?mol^?1 K^?1, and those of enthalpy ranged from 16.31 to 30.77 kJ mol^?1. The equilibrium parameter (R _L) indicated that the adsorption of Hg(II) on Tunisian smectitic clays was favourable under the experimental conditions of this study.

Conclusion

The clay of the Aleg formation, Tunisia was found to be an efficient adsorbent for Hg(II) removal in aqueous systems.     

Increased urinary 8-hydroxy-2��-deoxyguanosine levels in workers exposed to di-(2-ethylhexyl) phthalate in a waste plastic recycling site in China

Background

Di-(2-ethylhexyl) phthalate (DEHP) is a common plasticizer used in industrial and diverse consumer products. Animal studies indicate DEHP caused developmental, reproductive, and hepatic toxicities. However, human studies of the potential effects of DEHP are limited.

Methods

The exposed site with a history of over 20 years of waste plastic recycling was located in Hunan Province, China. The reference site without known DEHP pollution source was about 50 km far away from the exposed site. In this study, 181 workers working in plastic waste recycling and 160 gender?Cage matched farmers were recruited. DEHP concentrations in water and cultivated soil samples, serum thyroid-stimulating hormone, malondialdehyde (MDA), superoxide dismutase (SOD), urinary 8-hydroxy-2??-deoxyguanosine (8-OHdG), and micronuclei frequency in human capillary blood lymphocytes were analyzed.

Results

Mean levels of DEHP were greater in environment at the recycling site than at reference site (industry wastewater for the exposed: 42.43 ??g/l; well water: 14.20 vs. 0.79 ??g/l, pond water: 135.68 vs. 0.37 ??g/l, cultivated soil: 13.07 vs. 0.81 mg/kg, p?p?p?Conclusions The occupational DEHP exposure might contribute to oxidative deoxyribonucleic acid damage in the male workers.     

Personal monitoring of exposure to particulate matter with a high temporal resolution

Background

Continuous monitoring of air quality is implemented by government institutions at fixed ambient sites. However, the correlation between fixed site measurements and exposure of individual persons to air contaminants is likely to be weak.

Materials and methods

We measured particulate matter both outdoors and indoors by following the spatial movement of individuals. Sixteen test persons took part and carried a measurement backpack for a 24-h period. The backpack was comprised of a Grimm Aerosol Spectrometer model 1.109, a GPS device, and a video camera for tracking of human behavior. The spectrometer provided information about particle numbers and mass in 32-size classes with a high temporal resolution of 6 s.

Results

The personal exposure of individuals during 24 h could significantly exceed the outdoor particulate matter (PM)₁₀ concentrations measured at the fixed sites. The average 24-h exposure of all test persons for PM₁₀ varied from 27 to 322 ??g m^?3. Environmental tobacco smoke and cooking emissions were among the main indoor sources for PM. The amount of particulate matter a test person was exposed to was highly dependent on the spatial behavior and the surrounding microenvironment conditions.

Discussion

Large-scale experiments including personal measurements might help to improve modeling approaches to approximate the actual exposure on a statistically sound basis.     

Binding of triclosan to human serum albumin: insight into the molecular toxicity of emerging contaminant

Purpose

The interaction between triclosan (TCS) and human serum albumin (HSA) was investigated in order to obtain the binding mechanism, binding constant, the type of binding force, the binding distance between the donor and acceptor, and the effect of TCS on the conformation change of HSA.

Methods

A HSA solution was added to the quartz cell and then titrated by successive addition of TCS. The fluorescence quenching spectra and synchronous spectra were recorded with the excitation and emission slits of the passage of band set at 10 and 20 nm. Three-dimensional fluorescence spectra of HSA were recorded before and after the addition of TCS. The capillary electrophoresis was conducted with the pressure injection mode at 0.5 psi for 5 s, separation under 25 kV, and detection at 214 nm.

Results

Fluorescence data indicated the fluorescence quenching of HSA by TCS was static quenching, and the quenching constants (K _a ) were 1.14?×?10⁵, 8.75?×?10⁴, 6.67?×?10⁴, and 5.00?×?10⁴ at 293, 298, 303, and 309 K, respectively. The thermodynamic parameters, enthalpy change (??H) and entropy change (??S) for the interaction were calculated to be ?37.9 kJ mol^?1 and 32.6 J?mol^?1 K^?1. The binding distance between TCS and tryptophan residues of HSA was obtained to be 1.81 nm according to F??rster nonradioactive energy transfer theory. The UV-Vis absorption spectroscopy, the synchronous fluorescence spectroscopy, three-dimensional fluorescence spectroscopy, and circular dichroism spectroscopy revealed the alterations of HSA secondary structure in the presence of TCS. Finally, the interaction between TCS and HSA was further confirmed by capillary electrophoresis.

Conclusions

TCS was bound to HSA to form the TCS-HSA complex, with the binding distance of 1.81 nm. Hydrophobic interaction and hydrogen bond were dominated in the binding. TCS could change the secondary conformation of HSA. This work provides an insight into noncovalent interaction between emerging pollutants and protein, helping to elucidate the toxic mechanism of such pollutants.     

Synthesis of α-Fe2O3 nanofibers for applications in removal and recovery of Cr(VI) from wastewater

Purpose

Nanomaterials such as iron oxides and ferrites have been intensively investigated for water treatment and environmental remediation applications. The purpose of this work is to synthesize α-Fe₂O₃ nanofibers for potential applications in removal and recovery of noxious Cr(VI) from wastewater.

Methods

α-Fe₂O₃ nanofibers were synthesized via a simple hydrothermal route followed by calcination. The crystallographic structure and the morphology of the as-prepared α-Fe₂O₃ nanofibers were characterized by X-ray diffraction, scanning electron microscope, and transmission electron microscope. Batch adsorption experiments were conducted, and Fourier transform infrared spectra were recorded before and after adsorption to investigate the Cr(VI) removal performance and adsorption mechanism. Langmuir and Freundlich modes were employed to analyze the adsorption behavior of Cr(VI) on the α-Fe₂O₃ nanofibers.

Results

Very thin and porous α-Fe₂O₃ nanofibers have been successfully synthesized for investigation of Cr(VI) removal capability from synthetic wastewater. Batch experiments revealed that the as-prepared α-Fe₂O₃ nanofibers exhibited excellent Cr(VI) removal performance with a maximum adsorption capacity of 16.17 mg g^?1. Furthermore, the adsorption capacity almost kept unchanged after recycling and reusing. The Cr(VI) adsorption process was found to follow the pseudo-second-order kinetics model, and the corresponding thermodynamic parameters ΔG°, ΔH°, and ΔS° at 298 K were calculated to be ?26.60 kJ?mol^?1, ?3.32 kJ?mol^?1, and 78.12 J?mol^?1 K^?1, respectively.

Conclusions

The as-prepared α-Fe₂O₃ nanofibers can be utilized as efficient low-cost nano-absorbents for removal and recovery of Cr(VI) from wastewater.     

Airborne lead levels in the Korean peninsula: characterization of temporal and spatial patterns and cancer risk analysis

Introduction

This study collected long-term airborne lead concentrations in the Korean peninsula and analyzed their temporal, spatial, and cancer risk characterization.

Methods

Approximately, 12,000 airborne samples of total suspended particulate (TSP) were collected from 30 ambient air monitoring stations in inland (Daegu, Daejeon, Gwangju, and Seoul) cities and portal cities (Incheon, Busan, and Ulsan) over a period of 7?years (2004?C2010). High volume air samplers were employed to collect daily TSP samples during the second week of the consecutive months throughout the entire study period. The concentrations of Pb extracted from the TSP samples were analyzed using either inductively coupled plasma-atomic emission or flame atomic absorption spectrometry.

Results

The long-term high mean Pb concentrations were observed in the port cities including Incheon (88?±?18?ng/m³), Ulsan (61?±?7?ng/m³), and Busan (58?±?6?ng/m³). In the temporal analysis, seasonal mean Pb levels were relatively higher in winter and spring than those in summer and fall. In the spatial analysis, the mean Pb levels in spring, winter, and fall from Incheon, which showed the highest seasonal concentrations except summer, were 110?±?19, 101?±?18, and 76?±?23?ng/m³, respectively. In summer, the highest seasonal mean Pb level was observed in the largest industrial city and the second port city, Ulsan (78?±?15?ng/m³), followed by Incheon (65?±?13?ng/m³).

Conclusion

The estimated excess cancer risk analysis showed that inhalation of Pb could result in cancer for one or two persons per million of population in the Korean peninsula.     

Microbial structure and chemical components of aerosols caused by rotating brushes in a wastewater treatment plant

Purpose

Bacterial community structure and the chemical components in aerosols caused by rotating brushes in an Orbal oxidation ditch were assessed in a Beijing municipal wastewater treatment plant.

Methods

Air samples were collected at different distances from the aerosol-generating rotating brushes. Molecular culture-independent methods were used to characterize the community structure of the airborne bacteria in each sample regardless of cell culturability. A clone library of 16S rDNA directly amplified from air DNA of each sample was constructed and sequenced to analyze the community composition and diversity. Insoluble particles and water-soluble ions emitted with microorganisms in aerosols were analysis by a scanning electron microscope together with energy dispersive X-ray spectroscopy and ion chromatogram analyzer.

Results

In total, most of the identified bacteria were Proteobacteria. The majority of sequences near the rotating brushes (the main source of the bioaerosols) were Proteobacteria (62.97 %) with ??-(18.52 %) and ??-(44.45?%) subgroups and Bacteroidetes (29.63 %). Complex patterns were observed for each sampling location, suggesting a highly diverse community structure, comparable to that found in water in the Orbal oxidation ditch. Accompany with microorganisms, 46.36???g/m³ of SO ₄ ^2? , 29.35???g/m³ of Cl^?, 21.51???g/m³ of NO ₃ ^? , 19.76???g/m³ of NH ₄ ⁺ , 11.42???g/m³ of PO ₄ ^3? , 6.18???g/m³ of NO ₂ ^? , and elements of Mg, Cl, K, Na, Fe, S, and P were detected from the air near the aerosols source.

Conclusions

Differences in the structure of the bacterial communities and chemical components in the aerosols observed between sampling sites indicated important site-related variability. The composition of microorganisms in water was one of the most important sources of bacterial communities in bioaerosols. Chemical components in bioaerosols may provide a media for airborne microorganism attachment, as well as a suitable microenvironment for their growth and survival in the air. This study will be benefit for the formulation of pollution standards, especially for aerosols, that take into account plant workers?? health.     

Copper bioaccumulation,photosystem II functioning,and oxidative stress in the seagrass <Emphasis Type="Italic">Cymodocea nodosa</Emphasis> exposed to copper oxide nanoparticles

Photosynthetic activity, oxidative stress, and Cu bioaccumulation in the seagrass Cymodocea nodosa were assessed 4, 12, 24, 48, and 72 h after exposure to two copper oxide nanoparticle (CuO NP) concentrations (5 and 10 mg L^?1). CuO NPs were characterized by scanning electron microscopy (SEM) and dynamic light scattering measurements (DLS). Chlorophyll fluorescence analysis was applied to detect photosystem II (PSII) functionality, while the Cu accumulation kinetics into the leaf blades was fitted to the Michaelis-Menten equation. The uptake kinetics was rapid during the first 4 h of exposure and reached an equilibrium state after 10 h exposure to 10 mg L^?1 and after 27 h to 5 mg L^?1 CuO NPs. As a result, 4-h treatment with 5 mg L^?1 CuO NPs, decreased the quantum yield of PS II photochemistry (Φ _PSΙΙ ) with a parallel increase in the regulated non-photochemical energy loss in PSII (Φ _NPQ ). However, the photoprotective dissipation of excess absorbed light energy as heat, through the process of non-photochemical quenching (NPQ), did not maintain the same fraction of open reaction centers (q _p ) as in control plants. This reduced number of open reaction centers resulted in a significant increase of H₂O₂ production in the leaf veins serving possibly as an antioxidant defense signal. Twenty-four-hour treatment had no significant effect on Φ _PSΙΙ and q _p compared to controls. However, 24 h exposure to 5 mg L^?1 CuO NPs increased the quantum yield of non-regulated energy loss in PSII (Φ _NO ), and thus the formation of singlet oxygen (¹O₂) via the triplet state of chlorophyll, possible because the uptake kinetics had not yet reached the equilibrium state as did 10 mg L^?1. Longer-duration treatment (48 and 72 h) had less effect on the allocation of absorbed light energy at PSII and the fraction of open reaction centers, compared to 4-h treatment, suggesting the function of a stress defense mechanism. The response of C. nodosa leaves to CuO NPs fits the “Threshold for Tolerance Model” with a threshold time (more than 4 h) required for induction of a stress defense mechanism, through H₂O₂ production.     

Adsorptive removal of Pb2+ form aqueous solution by macrocyclic calix[4]naphthalene: kinetic, thermodynamic, and isotherm analysis

Background

The adsorption characteristics of Pb²⁺ ions from aqueous solutions onto calix[4]naphthalene have been investigated.

Method

Calix[4]naphthalene was prepared by the condensation of 1-naphthol and formaldehyde (1:2) in presence of hydrochloric acid at 80°C. The effect of various operation parameters, such as solution pH, initial metal ion concentration, contact time, and temperature, on the adsorption capacity of calix[4]naphthalene for Pb²⁺ have been investigated.

Result

Experimental results showed that the adsorption of Pb²⁺ ions increased with the increase in solution pH and temperature. Langmuir and Freundlich isotherms models were used to describe the adsorption behavior of Pb²⁺ by calix[4]naphthalene. Equilibrium data fitted well with the Langmuir isotherm model and the maximum adsorption capacity of calix[4]naphthalene for Pb²⁺ at 30°C was found to be 29.15 mg g^?1. Kinetic studies indicated that the adsorption followed pseudo-second order model and the thermodynamic studies revealed that the adsorption process was spontaneous and endothermic in nature. The obtained results demonstrated that calix[4]naphthalene can be used as an effective adsorbent for Pb²⁺ ions removal from water.     

Distribution characteristics of organochlorine pesticides in surface and vertical sediments from the Zha Long Wetland, China

Introduction

The Zha Long Wetland, the first water bird conservation area in China, lies on the northern bank of the Song Nen Plain with an area of 2,100 km². In many areas of the Zha Long Wetland, water pollution has led to a decrease in the wetland??s ecological function, vegetation degradation, a decrease in the number of bird species, and the depletion of fish resources.

Materials and methods

The sediments used in this study were collected from the surface sediment of seven sites and from different depths in three types of marshes in the Zha Long Wetland in northeast China in late October 2006. The levels and distribution patterns of 17 organochlorine pesticides (OCPs; ??-HCH, ??-HCH, ??-HCH, ??-HCH, p,p??-DDE, p,p??-DDD, p,p??-DDT, endosulfan I, endosulfan II, endosulfan sulfate, heptachlor, heptachlor epoxide, aldrin, dieldrin, endrin, endrin aldehyde, and methoxychlor) in surface sediments as well as hexachlorocyclohexane (HCH) and 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane (DDT) in vertical sediments were investigated.

Results and discussion

The concentrations of HCHs, DDTs, endosulfans, heptachlors, aldrin, and methoxychlor in surface sediments ranged from 10.44 to 41.97 ng/g, nd (undetectable levels) to 211.88 ng/g, nd to 69.89 ng/g, nd to 28.10 ng/g, 9.81 to 623.83 ng/g, and from nd to 3.99 ng/g, respectively. The highest levels of OCPs were detected in Tangtugangzi at a total concentration of 727.72 ng/g, where the dominant compound was endrin at a concentration of 483.04 ng/g. In the vertical sediments, the HCHs and DDTs were in the ranges of nd?C136.00 and nd?C214.06 ng/g, respectively.

Conclusions

Different distributions of HCHs, DDTs, and other OCPs indicated that they originated from different contamination sources. Composition analyses in surface sediments indicated recent OCP usage or discharge at some sample sites in the Zha Long Wetland.     

Enhancement of natural radioactivity in fertilized soil of Faisalabad, Pakistan

Background, goal, and scope

Natural radioactivity in phosphate rock (PR) is transferred to phosphate fertilizer (PF) during the manufacturing process of the PF. The continuous addition of the PF to the cultivated soil accumulates the radionuclides in the land and increases the level of radioactivity in the soil. The purpose of the present study was to investigate the enhanced level of accumulated radioactivity due to the continuous addition of the PF in the farmlands of Nuclear Institute of Agriculture and Biology (NIAB) at Faisalabad in Pakistan. The selected study area consisted of the highly fertilized farmlands and an unfertilized barren land of the NIAB.

Introduction

The understudy area is very fertile for the growth of various types of crops; therefore, four agricultural research institutes have been established at Faisalabad and NIAB is one of those. The NIAB has developed various research farmlands at different places in Pakistan. The crop yield has been increased by adding various fertilizers in the farmlands. The addition of the PF accompanied with the radionuclides enhances radioactivity in the fields. Human being is exposed directly or indirectly to this radiological hazard. A prolong exposure may become a cause of health risk.

Materials and methods

The area of study consisted of three types of lands: the land under cultivation for the last 40 and 30?years called Site 1 and Site 2, respectively, and the barren land was called Site 3. A total of 75 soil samples were collected within the crop rooting zone (up to 25?cm deep) of the soil of the NIAB farms. The samples were dried, pulverized to powder, sealed in plastic containers, and stored to achieve equilibrium between ²²⁶Ra and ²²²Rn. Activity concentrations of the radionuclides ²³⁸U (²²⁶Ra), ²³²Th, and ⁴⁰K in soil samples were determined by using a high resolution gamma ray spectrometry system, consisting of an high purity germanium detector coupled through a spectroscopy amplifier with a PC based MCA installed with Geni-2000 software.

Results

The measured activity concentration levels of ⁴⁰K were 662?±?15, 615?±?17, and 458?±?20?Bq?kg^?1, ²²⁶Ra were 48?±?6, 43?±?5, and 26?±?4?Bq?kg^?1, and that of ²³²Th were 39?±?5, 37?±?5, 35?±?5?Bq?kg^?1, respectively, in the soil of the Sites 1, 2, and 3. Gamma dose rate 1?m above the soil surface was 55, 51, and 40?nGy?h^?1 from Sites 1, 2, and 3, respectively. External dose rates in the rooms constructed of the bricks made of the soil from Sites 1, 2, and 3 were 161, 149, and 114?nGyh^?1, respectively.

Discussions

Activity concentration values of ⁴⁰K and ²²⁶Ra in the soil of Sites 1 and 2 were higher than that in the soil of Site 3. The relative rise of ⁴⁰K was 43?% and 34?% and that of ²²⁶Ra was 85?% and 65?% respectively in these sites. Activity concentrations of ²³²Th in all these sites were in the background range. Gamma dose rate 1?m above soil surface of Sites 1 and 2 was 40?% and 30?% respectively higher than that from the soil of Site 3. The rise in activity of ⁴⁰K and ²²⁶Ra and gamma dose from the Site 1 was greater than that from the Site 2. The least activity and dose were observed from the Site 3. Gamma dose in the dwellings made of fertilized soil bricks of Site 1 and Site 2 were respectively calculated to be 41?% and 32?% higher than that in the abodes made of unfertilized soil bricks of Site 3.

Conclusions

Activity concentrations of ²²⁶Ra and ⁴⁰K were observed to be enhanced in the fertilized farmlands of the NIAB. Outdoor and indoor gamma dose as radiological hazard were found to be increasing with the continuous addition of PF in the understudy farmlands.

Recommendations

It is recommended that naturally occurring radioactive metal should be removed during the process of manufacturing of the PF from the PR.

Prospective

The rise in radioactivity in the farmlands due to the addition of the PF can be a source of direct or indirect exposure to radiation that may enhance cancer risk of the exposed individuals.     

Evaluation of growth and biochemical indicators of Salvinia natans exposed to zinc oxide nanoparticles and zinc accumulation in plants

The adverse effects of zinc oxide nanoparticles (ZnO NPs) with an average diameter of 25 nm on the aquatic plant Salvinia natans (L.) All. were determined. Growth, superoxide dismutase (SOD) activity, catalase (CAT) activity, peroxidase activity, and chlorophyll content of the plants were measured after 7 days of exposure to different concentrations of ZnO NPs (1 to 50 mg L^?1). The particle distribution in the culture medium (without plants) during the first 24 h was determined using a Nanotrac 250 particle analyzer. We also investigated the zinc accumulation in leaves and roots of the plant after 7 days of exposure. Exposure to 50 mg L^?1 ZnO NPs significantly increased SOD and CAT activities (P?<?0.05) and significantly depressed photosynthetic pigments (P?<?0.05). However, plant growth was not significantly affected (P?>?0.05). NPs completely precipitated at the bottom of the container at 8 h except for the portions of dissolution and aggregation on the roots. ZnO NPs at a concentration of 50 mg L^?1 can adversely affect S. natans, and their stress is affected by their aggregation and dissolution.     

Photodegradation of the novel fungicide fluopyram in aqueous solution: kinetics,transformation products,and toxicity evolvement

The aqueous photodegradation of fluopyram was investigated under UV light (λ?≥?200 nm) and simulated sunlight irradiation (λ?≥?290 nm). The effect of solution pH, fulvic acids (FA), nitrate (NO₃ ^?), Fe (III) ions, and titanium dioxide (TiO₂) on direct photolysis of fluopyram was explored. The results showed that fluopyram photodegradation was faster in neutral solution than that in acidic and alkaline solutions. The presence of FA, NO₃ ^?, Fe (III), and TiO₂ slightly affected the photodegradation of fluopyram under UV irradiation, whereas the photodegradation rates of fluopyram with 5 mg L^?1 Fe (III) and 500 mg L^?1 TiO₂ were about 7-fold and 13-fold faster than that without Fe (III) and TiO₂ under simulated sunlight irradiation, respectively. Three typical products for direct photolysis of fluopyram have been isolated and characterized by liquid chromatography tandem mass spectrometry. These products resulted from the intramolecular elimination of HCl, hydroxyl-substitution, and hydrogen extraction. Based on the identified transformation products and evolution profile, a plausible degradation pathway for the direct photolysis of fluopyram in aqueous solution was proposed. In addition, acute toxicity assays using the Vibrio fischeri bacteria test indicated that the transformation products were more toxic than the parent compound.     

Bioremediation of acidic oily sludge-contaminated soil by the novel yeast strain Candida digboiensis TERI ASN6

Background, aim, and scope

Primitive wax refining techniques had resulted in almost 50,000 tonnes of acidic oily sludge (pH 1–3) being accumulated inside the Digboi refinery premises in Assam state, northeast India. A novel yeast species Candida digboiensis TERI ASN6 was obtained that could degrade the acidic petroleum hydrocarbons at pH 3 under laboratory conditions. The aim of this study was to evaluate the degradation potential of this strain under laboratory and field conditions.

Materials and methods

The ability of TERI ASN6 to degrade the hydrocarbons found in the acidic oily sludge was established by gravimetry and gas chromatography–mass spectroscopy. Following this, a feasibility study was done, on site, to study various treatments for the remediation of the acidic sludge. Among the treatments, the application of C. digboiensis TERI ASN6 with nutrients showed the highest degradation of the acidic oily sludge. This treatment was then selected for the full-scale bioremediation study conducted on site, inside the refinery premises.

Results

The novel yeast strain TERI ASN6 could degrade 40 mg of eicosane in 50 ml of minimal salts medium in 10 days and 72% of heneicosane in 192 h at pH 3. The degradation of alkanes yielded monocarboxylic acid intermediates while the polycyclic aromatic hydrocarbon pyrene found in the acidic oily sludge yielded the oxygenated intermediate pyrenol. In the feasibility study, the application of TERI ASN6 with nutrients showed a reduction of solvent extractable total petroleum hydrocarbon (TPH) from 160 to 28.81 g kg^?1 soil as compared to a TPH reduction from 183.85 to 151.10 g kg^?1 soil in the untreated control in 135 days. The full-scale bioremediation study in a 3,280-m² area in the refinery showed a reduction of TPH from 184.06 to 7.96 g kg^?1 soil in 175 days.

Discussion

Degradation of petroleum hydrocarbons by microbes is a well-known phenomenon, but most microbes are unable to withstand the low pH conditions found in Digboi refinery. The strain C. digboiensis could efficiently degrade the acidic oily sludge on site because of its robust nature, probably acquired by prolonged exposure to the contaminants.

Conclusions

This study establishes the potential of novel yeast strain to bioremediate hydrocarbons at low pH under field conditions.

Recommendations and perspectives

Acidic oily sludge is a potential environmental hazard. The components of the oily sludge are toxic and carcinogenic, and the acidity of the sludge further increases this problem. These results establish that the novel yeast strain C. digboiensis was able to degrade hydrocarbons at low pH and can therefore be used for bioremediating soils that have been contaminated by acidic hydrocarbon wastes generated by other methods as well.     

Removal of Cu, Zn, and Cd from aqueous solutions by the dairy manure-derived biochar

Purpose

Biochar derived from waste biomass is now gaining much attention for its function as a biosorbent for environmental remediation. The objective of this study was to determine the effectiveness of biochar as a sorbent in removing Cd, Cu, and Zn from aqueous solutions.

Methods

Biochar was produced from dairy manure (DM) at two temperatures: 200°C and 350°C, referred to as DM200 and DM350, respectively. The obtained biochars were then equilibrated with 0–5 mM Cu, Zn or Cd in 0.01 M NaNO₃ solution for 10 h. The changes in solution metal concentrations after sorption were evaluated for sorption capacity using isotherm modeling and chemical speciation Visual MINTEQ modeling, while the solid was collected for species characterization using infrared spectroscopy and X-ray elemental dot mapping techniques.

Results

The isotherms of Cu, Zn, and Cd sorption by DM200 were better fitted to Langmuir model, whereas Freundlich model well described the sorption of the three metals by DM350. The DM350 were more effective in sorbing all three metals than DM200 with both biochars had the highest affinity for Cu, followed by Zn and Cd. The maximum sorption capacities of Cu, Zn, and Cd by DM200 were 48.4, 31.6, and 31.9 mg g^?1, respectively, and those of Cu, Zn, and Cd by DM350 were 54.4, 32.8, and 51.4 mg g^?1, respectively. Sorption of the metals by the biochar was mainly attributed to their precipitation with PO ₄ ^3? or CO ₃ ^2? originating in biochar, with less to the surface complexation through –OH groups or delocalized π electrons. At the initial metal concentration of 5 mM, 80–100 % of Cu, Zn, and Cd retention by DM200 resulted from the precipitation, with less than 20 % from surface adsorption through phenonic –OH complexation. Among the precipitation, 20–30 % of the precipitation occurred as metal phosphate and 70–80 % as metal carbonate. For DM350, 75–100 % of Cu, Zn, and Cd retention were due to the precipitation, with less than 25 % to surface adsorption through complexation of heavy metal by phenonic –OH site or delocalized π electrons. Among the precipitation, only less than 10 % of the precipitation was present as metal phosphate and more than 90 % as metal carbonate.

Conclusions

Results indicated that dairy manure waste can be converted into value-added biochar as a sorbent for sorption of heavy metals, and the mineral components originated in the biochar play an important role in the biochar's high sorption capacity.     

Evaluation of the individuality of white rot macro fungus for the decolorization of synthetic dye

Introduction

A biosorbent was developed by simple dried Agaricus bisporus (SDAB) and effectively used for the biosorption of cationic dyes, Crystal Violet and Brilliant Green.

Materials and methods

For the evaluation of the biosorbent system, all the batch equilibrium parameters like pH, biomass dose, contact time, and temperature were optimized to determine the decolorization efficiency of the biosorbent. The maximum yields of dye removal were achieved at pH 4.0 for Crystal Violet (CV) and pH 5.0 for Brilliant Green (BG), which are closer to their natural pH also.

Result and discussion

Equilibrium was established at 60 and 40 min for CV and BG, respectively. Pseudo first-order, pseudo second-order, and intraparticle-diffusion kinetic models were studied at different temperatures. Isotherm models such as Freundlich, Langmuir, and Dubinin–Radushkevich were also studied. Biosorption processes were successfully described by Langmuir isotherm model and the pseudo second-order kinetic model.

Conclusions

The biosorption capacity of A. bisporus over CV and BG were found as 21.74 and 12.16 mg gm^?1. Thermodynamic parameters indicated that the CV and BG dye adsorption onto A. bisporus is spontaneous and exothermic in the single and ternary systems. Scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy were used for the surface morphology, crystalline structure of biosorbent, and dye–biosorbent interaction, respectively. This analysis of the biosorption data confirmed that these biosorption processes are ecofriendly and economical. Thus, this biomass system may be useful for the removal of contaminating cationic dyes.     

Changes of polyamine levels in roots of Sagittaria sagittifolia L. under copper stress

Introduction

The goal of the present study was to investigate the effects of Cu contamination on the above-mentioned biochemical and physiological parameters in order to explore possible prevention strategies against heavy metal stress.

Materials and methods

Effects of copper (Cu) on the roots of Sagittaria sagittifolia L. were studied after 10 days of treatment at five concentration levels. The accumulation of Cu, the generation rate of O₂ ^·?C, the contents of thiobarbituric acid reactive substances (TBARS) and polyamines, as well as the activities of arginine decarboxylase (ADC) and polyamine oxidase (PAO) in the roots were measured and analyzed.

Results and discussion

It was observed that endogenous Cu content increased in roots of S. sagittifolia L. in a concentration-dependent manner, along with an increased production of O₂ ^·?C. TBARS content increased progressively up to 5 ??mol l^?1 Cu. A constant increase in ADC activity was also observed. The results indicated that lower Cu concentrations (2.5 and 5 ??mol l^?1, respectively) had greater enhancing effect on the contents of free Put and perchloric acid-soluble conjugated (PS-conjugated) putrescine (Put), while Cu treatments at different concentration levels had similar enhancing effect on the content of perchloric acid-insoluble bound Put. In total, Put content in each Cu-treated group was higher than that in the control group. PAO activity was inhibited up to 10 ??mol l^?1 Cu but enhanced at higher Cu concentrations (20 and 40 ??mol l^?1). This explained the initial rise and subsequent decline of the contents of all forms of spermine (Spm), free and PS-conjugated spermidine (Spd). However, with the increase of Cu concentration, total Spm content increased gradually while total Spd content decreased. Our results suggest that Cu is phytotoxic to the roots of S. sagittifolia L. at high concentrations, and that the increased Spm level is not sufficient to resist Cu-induced oxidative damages.     

Fine and ultrafine particles emitted from laser printers as indoor air contaminants in German offices

Purpose

Various publications indicate that the operation of laser printers and photocopiers may be associated with health effects due to the release of gaseous components and fine and ultrafine particles (UFP). However, only sparse studies are available that evaluate the possible exposure of office workers to printer emissions under real conditions. Therefore, the aim of our study was to assess the exposure of office workers to particulate matter released from laser printers and photocopiers.

Methods

Concentrations of fine particles and UFP were measured before, during, and after the operation of laser printing devices in 63 office rooms throughout Germany. Additionally, the particles were characterized by electron microscopy and energy-dispersive X-ray spectroscopy.

Results

A significant increase of fine particles and UFP was identified in ambient workplace air during and after the printing processes. Particle fractions between 0.23 and 20???m emitted by the office machines significantly affect particle mass concentrations while printing 500 pages, i.e., during the printing process, PM_0.23?C20, PM_2.5, and PM₁₀ concentrations increased in 43 out of the evaluated 62 office rooms investigated. Additionally, a significant increase was observed in submicrometer particles, with median particle number concentrations of 6,503 particles/cm³ before and 18,060 particles/cm³ during the printing process.

Conclusions

Our data indicate that laser printers and photocopiers could be a relevant source of fine particles and particularly UFP in office rooms.