Assessment of aliphatic-aromatic copolyester biodegradable mulch films. Part I: field study

The objective of this work was to study the use of new biodegradable films in agriculture under open field conditions. Three biodegradable mulch films made from modified biodegradable polyester of different thicknesses and colors (black and white) and a conventional low density polyethylene (LDPE) mulch film were used to cover the beds of tomato plants. Changes in physical appearance of the films were recorded as well as changes in their mechanical, optical, and physical properties. Once tomato harvest was completed, the conventional LDPE mulch film was removed and all the tomato plants were cut using a mower. The biodegradable mulch films were plowed into the soil. The change in the appearance of the film was recorded and samples of each film after plowing were characterized according to the properties mentioned above. After the biodegradable films photodegraded, cross-link formation occurred within the films which promoted brittleness. Titanium dioxide, an additive used to produce white color in the films, catalyzed the photodegradation, while carbon black used for black color stabilized the photodegradation. The white films started to degrade after two weeks while it took about eight weeks for the black films to significantly degrade. The black biodegradable film seems to be a more promising alternative as a mulch film because of the comparable yields and weed suppression ability to conventional mulch film.     

Solar photocatalytic decolorization of methylene blue in water

In this study, a photocatalytic decolorization system equipped with immobilized TiO2 and illuminated by solar light was used to remove the color of wastewater. To examine the decoloring efficiency of this system, photocatalytic decolorization of an organic dye such as methylene blue was studied as an example. The effects of light source, pH, as well as the initial concentration of dye were also investigated. It was observed that the solution of methylene blue could be almost completely decolorized by the solar light/TiO2 film process while there was about 50% color remaining with solar irradiation only. In addition, it was found that the decoloring efficiency of solution was higher with solar light irradiation than with artificial UV light irradiation, even though the artificial UV light source supplied higher UV intensity at 254 nm. The color removal rate of methylene blue with solar light irradiation was almost twice that of artificial UV light irradiation. This phenomena was mainly attributed to that some visible light range of solar light was useful for exciting the methylene blue molecules adsorbed on TiO2 film, leading to a photosensitization process undergoing and decoloring efficiency promoted. This solar-assisted photocatalytic device showed potential application for decoloring organic dyes in wastewater.     

Compound-specific chlorine isotope analysis of polychlorinated biphenyls isolated from Aroclor and Clophen technical mixtures

The combined electrochemical oxidation-solar-light/immobilized TiO₂ film process was conducted to degrade an azo dye, Reactive Black 5 (RB5). The toxicity was also monitored by the Vibrio fischeri light inhibition test. The electrochemical oxidation rapidly decolorized RB5 (55, 110 μM) with a supporting electrolyte of 2 g l⁻¹ NaCl at current density 277 A m⁻² and pH 4. However, TOC mineralization and A₃₁₀ removal were low. Additionally, the treated solution showed high biotoxicity. RB5 at 110 μM significantly retarded the de-colorization efficiency by using the solar-light/immobilized TiO₂ film process. The combined electrochemical oxidation-solar-light/immobilized TiO₂ process effectively increased the removal of color, A₃₁₀, and TOC. The toxicity was also significantly reduced after 3 h of solar irradiation. The results indicated that the low-cost combined process is a potential technique for rapid treatment of RB5.     

Decolorization of textile wastewater by photo-fenton oxidation technology

This paper describes the use of photo-fenton process for color removal from textile wastewater stream. The wastewater sample to be treated was simulated by using colorless polyvinyl alcohol (PVA) and reactive dyestuff of R94H. As a result, the hydroxyl radical (HO*) oxidation can effectively remove color, but the chemical oxygen demand (COD) was removed in a slight degree. The color removal is markedly related with the amount of HO* formed. The optimum pH for both the OH* formation and color removal occurs at pH 3-5. Up to 96% of color can be removed within 30 min under the studied conditions. Due to the photoreduction of ferric ion into ferrous ion, color resurgence was observed after 30 min. The ferrous dosage and UV power affect the color removal in a positive way, however, the marginal benefit is less significant in the higher range of both. PVA as the major background COD of a textile wastewater stream inhibits the color removal insignificantly as its concentration increases.     

基于三波长透射率的水体色度检测标准

为了推动有关分光光度法测量水体色度的国家标准的建立，对美国和台湾地区的水体色度标准检测方法进行了研究，提出了新的基于三波长透射率测量水体色度的方法。根据现行国家标准中的色度学相关数据，选择在595、555和445 nm 3个波长处的光谱透射率计算水样的三刺激值，依照国标推荐的色差公式建立了测量水样色度的标准检量线。利用所提出的新的水体色度测量方法对5个水样的色度值进行了实际测量，结果表明，新的测量方法所得到的水体色度值与铂钴比色法一致。     

Aerial Detection of Vegetation Damage Utilizing a Simple 35-mm Camera System

The body of information presented in this paper is directed to environmental scientists interested in the detection of vegetation damage from air pollution. A dual 35-mm camera bank, manually operated from a small aircraft, was tested as a sensor system for detecting vegetation damage caused by air pollution. The cameras were filled with color and color infrared film and attached to a frame so that simultaneous exposure was possible. This gave a matched pair of photographs for each scene.

A test site was selected that contained three very large coal-fired power plants and a complex of beehive coke ovens. The power plants burn medium-sulfur coal (2 to 3%) which, after coal preparation, results in stack emissions of between 1500 and 2000 ppm sulfur dioxide (S0₂). The coke ovens are relatively old and have effectively no pollution controls. The ovens emit hydrogen sulfide, sulfur dioxide, a variety of benzene-based organics, and heavily dust-laden smoke. The areas near the power plants and coke ovens were monitored by photographic overflights on a regular basis. A variety of aerial photographs were made to test for optimum light conditions, exposure times, and altitudes. Field trips were carried out to examine photographed areas at the ground level.

Two areas were found to have vegetation damage on a scale that made aerial photographs useful. One area was damaged from effluent from the coke ovens; another area exhibited symptoms characteristic of oxidant-type damage where low sulfur dioxide concentrations may have been a contributing factor. In each case the 35-mm camera system was a success in terms of detecting and recording the stress. The chief advantages of such a technique are ease of operation, flexibility, and economy. Compared with conventional aerial photography, the savings are considerable. The disadvantages are small area coverage per photograph and difficulty in obtaining vertical photographs that would have a uniform scale. However, for this particular project, these were not serious drawbacks.     

高含盐废水降膜蒸发过程中液膜破裂的抑制

为解决高含盐废水降膜蒸发过程中液膜破裂产生的干区和结垢问题,采用高灵敏度的红外热成像仪实验研究了高含盐废水受热降膜破裂后的流动状态.结果表明,破裂降膜径向存在热Marangoni效应和溶质Marangoni效应.热Marangoni效应引起了液膜由侧而边缘向中心主流区的收缩,形成稳定的干区;而溶质Marangoni效应...     

Pre-oxidation and coagulation of textile wastewater by the Fenton process

This paper evaluates the Fenton process, involving oxidation and coagulation, for the removal of color and chemical oxygen demand (COD) from synthetic textile wastewater containing polyvinyl alcohol and a reactive dyestuff, R94H. The experimental variables studied include dosages of iron salts and hydrogen peroxide, oxidation time, mixing speed and organic content. The results show that color was removed mainly by Fenton oxidation. The color removal reached a maximum of 90% at a reaction time of 5 min under low dosages of H2O2 and Fe2+. In contrast, the COD was removed primarily by Fenton coagulation, rather than by Fenton oxidation. The ratio of removal efficiency between Fenton process and ferric coagulation was 5.6 for color removal and 1.2 for COD removal. It is concluded that Fenton process for the treatment of textile wastewater favors the removal of color rather than COD.     

Contamination characteristics and degradation behavior of low-density polyethylene film residues in typical farmland soils of China

Low-density polyethylene (LDPE) film residues left in farmlands due to agricultural activities were extensively investigated to evaluate the present pollution situation by selecting the typical areas with LDPE film application, including Harbin, Baoding, and Handan of China. The survey results demonstrated that the film residues were ubiquitous within the investigated areas and the amount reached 2,400-8,200 g ha(-1). Breakage rates of the film residues were almost at the same level in the studied fields. There were relatively small amounts of film residues remaining in neighboring farmland fields without application of LDPE film. The studies showed that the sheets of LDPE residues had the same oxidative deterioration, which was probably due to photodegradation instead of biodegradation. The higher molecular weight components of the LDPE film gradually decreased, which were reflected by the appearance of some small flakes detached from the film bodies. LDPE films in the investigated fields gradually deteriorated and the decomposing levels developed with their left time increasing. The degradation behaviors of LDPE films were confirmed by using Fourier transform infrared (FTIR), scanning electron microscopic (SEM), and gel permeation chromatography analyses.     

Variation in Organic Matter and Water Color in Lake Mälaren during the Past 70 Years

Interest in long time series of organic matter data has recently increased due to concerns about the effects of global climate change on aquatic ecosystems. This study presents and evaluates unique time series of chemical oxygen demand (COD) and water color from Lake Mälaren, Sweden, stretching almost seven decades (1935–2004). A negative linear trend was found in COD, but not in water color. The decrease was mainly due to installation of sewage works around 1970. Time series of COD and water color had cyclic pattern. It was strongest for COD, with 23 years periodicity. Similar periodicity observed in air temperature and precipitation in Sweden has been attributed to the North Atlantic Oscillation index and solar system orbit, suggesting that COD in Lake Mälaren is partly derived from algae. Discharge influenced water color more than COD, possibly because water color consists of colored substances brought into the lake from surrounding soils.     

垃圾渗滤液生化出水的脱色研究

分别采用脉冲电解法、混凝沉淀法、芬顿氧化法、高铁酸钾氧化法对垃圾渗滤液生化出水进行处理，考察了处理效果。结果表明：铁电极电解法和芬顿试剂氧化法均能脱除垃圾渗滤液的色度，去除有机物质。铁电极电解对色度的去除率可达98．4％，COD去除率可达84．4％；芬顿试剂氧化对色度的去除率可达99％，COD去除率可达85．8％。两种方法均能使出水达到排放标准。同时比较了各种处理方法的运行成本，在达到同样出水标准的前提下，铁电极电解运行成本远低于芬顿试剂氧化，为3．67元／t水，而芬顿试剂药剂成本为8．67元／t水。     

Contamination Characteristics and Degradation Behavior of Low-Density Polyethylene Film Residues in Typical Farmland Soils of China

Low-density polyethylene (LDPE) film residues left in farmlands due to agricultural activities were extensively investigated to evaluate the present pollution situation by selecting the typical areas with LDPE film application, including Harbin, Baoding, and Handan of China. The survey results demonstrated that the film residues were ubiquitous within the investigaed areas and the amount reached 2400–8200 g ha^?1. Breakage rates of the film residues were almost at the same level in the studied fields. There were relatively small amounts of film residues remaining in neighboring farmland fields without application of LDPE film. The studies showed that the sheets of LDPE residues had the same oxidative deterioration, which was probably due to photodegradation instead of biodegradation. The higher molecular weight components of the LDPE film gradually decreased, which were reflected by the appearance of some small flakes detached from the film bodies. LDPE films in the investigated fields gradually deteriorated and the decomposing levels developed with their left time increasing. The degradation behaviors of LDPE films were confirmed by using Fourier transform infrared (FTIR), scanning electron microscopic (SEM), and gel permeation chromatography analyses.     

混凝+芬顿法对中晚期垃圾渗滤液色度去除

垃圾渗滤液经一般生化处理后色度很大。对混凝和芬顿法结合深度处理垃圾渗滤液对色度去除进行了研究。混凝段通过中心复合设计(简称CCD)和响应面方法(简称RSM)分析了混凝的色度去除率的响应特征,建立了实际因素的最终方程模型:Y(色度去除率,%)=-553.40+73.74A+229.06B+0.38AB-34.16A2-22.67B2,(Y、A、B分别代表色度去除率、投加量和pH)并对絮凝条件进行优化,得到混凝反应的最佳优化条件:投加量1.11 g/L,pH 5.06,及在此条件下的去除率67.2%。在芬顿段,将芬顿反应对水中亲水性有机物相对含量(UV254)与对色度的去除特征相结合进行了研究,证明色度的去除跟该类有机物的去除有关,色度去除率最优值条件选择为H2O2/COD=1.0,Fe2+/H2O2=0.35∶1,而初始pH=2.5时对色度的去除达到99%以上。整个工艺出水可达到达标排放标(GB16889-2008)。     

Atmospheric volatilization of methyl bromide, 1,3-dichloropropene,and propargyl bromide through two plastic films: transfer coefficient and temperature effect

Atmospheric emission of methyl bromide (MeBr) and its potential alternative chemicals such as 1,3-dichloropropene (1,3-D) and propargyl bromide (PrBr) can contribute to air pollution and ozone depletion (for MeBr). One of the main sources of these chemicals is from agricultural soil fumigation. To understand the volatilization dynamics, emission of MeBr, 1,3-D, and PrBr through a polyethylene-based high-barrier film (HBF) and a virtually impermeable film (VIF) was measured using an air flow and sampling system that produced >90% mass balance. The experiment was conducted outdoors and was subjected to ambient daily temperature variations. The HBF film was found to be very permeable to 1,3-D and PrBr, but somewhat less permeable to MeBr. The VIF film was very impermeable to 1,3-D, PrBr, or MeBr. Measured volatilization flux, in general, exhibited strong diurnal variations which were controlled by film temperature. Unlike the HBF film, a time lag (∼12 h) was observed between high-temperatures and high-emission flux values for the VIF film. An impermeable film may be used as an effective means of controlling the atmospheric emission of MeBr and its alternative chemicals.     

分散染料生产废水治理工艺的研究

采用微电解一生化一氧化法工艺处理分散染料生产废水，以微电解作为废水的预处理，可去除綮不水中大部分色度，使可生化性提高；生化处理可去除大部分ＣＯＤｃｒ；进一步去除色度和ＣＯＤｃｒ。实验结果表明，整个工艺ＣＯＤｃｒ增除率可达９０％，色度去除率可达９６％，取得满意较的效果。     

Comparison of photocatalytic degradation of dyes in relation to their structure

The photocatalytic degradation of a series of six acid dyes (Direct Red 80, Direct Red 81, Direct Red 23, Direct Violet 51, Direct Yellow 27, and Direct Yellow 50) has been tested compared in terms of color removal, mineralization, and toxicity (Lactuca sativa L. test) after photocatalysis on immobilized titanium dioxide. The dyes were examined at their natural pH and after hydrolysis at pH 12. Results show that hydrolysis decreases strongly the efficiency of color removal, that full mineralization takes much longer reaction time than color removal, and that toxicity is only very partially reduced. Some structural parameters, related to the structure and the topology of the dye molecules, could be correlated with the apparent color removal rates at natural pH.     

Decolorizing of lignin wastewater using the photochemical UV/TiO2 process

Studies on applying the photochemical UV/TiO2 oxidation process to treat the lignin-containing wastewater for dissolved organic carbon (DOC), color and reducing A254 (the absorption at the wavelength of 254 nm) have been carried out. The data obtained in this study demonstrate that the UV/TiO2 process is effective in oxidizing the lignin thus reducing the color and DOC of the wastewater treated. The combined UV/TiO2 treatment can achieve better removal of DOC and color than the UV treatment alone. Color removal, based on American Dye Manufacture Index (ADMI) measurement, is greater than 99% if the pH is maintained at 3.0 with the addition of 1 g l(-1) TiO2. When 10 g l(-1) TiO2 is applied, the oxidation reduction potential (ORP) value is reached to result in an 88% removal of both DOC and color. A model was developed based on the variation of ORP during the photochemical reaction to simulate the decoloring process. The proposed model can be used to predict the color removal efficiency of the UV/TiO2 process.     

各种影响因子对电解法预处理医药废水的影响研究

探讨了电解法预处理医药废水时停留时间、电解电压、废水初始浓度、温度和废水pH值等影响因子对去除色度、COD和提高废水可生化性等处理效果的影响,并考察了其应用于工业实际废水处理的可行性.实验结果表明:电解法更适合高浓度医药废水的处理,色度的去除率可达到90%以上;电解时间宜控制在40～60 min;电解电压越高,废水COD和色度去除效果越好;在实验温度范围内,温度对色度和COD去除率的影响不大;废水pH值为7.5时电解效果最佳,工程运用宜控制在6～9之间.     

Chemical oxidation of wastewater from molasses fermentation with ozone

Color removal from biologically pre-treated molasses wastewater by means of chemical oxidation with ozone has been investigated. Batch experiments have been performed in order to analyze the influence of ozone dosage and reaction time on color removal, molecular weight distribution and decolorization kinetics. Depending on the applied ozone dosage, color removal from 71% to 93% and COD reduction from 15% to 25% were reached after 30 min reaction time. TOC values remained constant throughout ozonation. Gel permeation chromatography corroborated that high molecular weight compounds, responsible for the brown color, were present in raw wastewater. UV spectral studies confirmed that these colored compounds were melanoidins. As a result of ozonation the concentration of chromophore groups decreased. Ozonation of synthetic melanoidin under the same experimental conditions provided similar color removal efficiencies. Pseudo-first order kinetics with respect to colored compounds were found.     

Effect of ultraviolet-absorbing vinyl film on organophosphorus insecticides dichlorvos and fenitrothion residues in spinach

Dichlorvos and fenitrothion residues found in spinach grown in greenhouse covered either by regular vinyl film or UV-absorbing vinyl film (UV-A) were analyzed by gas chromatography. After one day, dichlorvos residues in spinach covered with regular vinyl film and UV-A degraded by 97% and 80%, respectively, and degraded 100% after three days covered with regular vinyl film and six days covered with UV-A. After three days, fenitrothion residue in spinach covered with regular vinyl film degraded by 72% and then by 97% after six days; residue in spinach covered with UV-A degraded by 50% after three days and by 95% after six days. These results indicate that UV-A used to prevent the occurrence of insects and fungi in greenhouses reduced the degradation rates of dichlorvos and fenitrothion.