Evaluating Sources of Indoor Air Pollution

Evaluation of Indoor air pollution problems requires an understanding of the relationship between sources, air movement, and outdoor air exchange. Research is underway to investigate these relationships. A three-phase program is being implemented: 1) Environmental chambers are used to provide source emission factors for specific indoor pollutants; 2) An IAQ (Indoor Air Quality) model has been developed to calculate indoor pollutant concentrations based on chamber emissions data and the air exchange and air movement within the indoor environment; and 3) An IAQ test house is used to conduct experiments to evaluate the model results. Examples are provided to show how this coordinated approach can be used to evaluate specific sources of indoor air pollution. Two sources are examined: 1) para-dichlorobenzene emissions from solid moth repellant; and 2) particle emissions from unvented kerosene heaters.

The evaluation process for both sources followed the three-phase approach discussed above. Para-dichlorobenzene emission factors were determined by small chamber testing at EPA’s Air and Energy Engineering Research Laboratory. Particle emission factors for the kerosene heaters were developed In large chambers at the J. B. Pierce Foundation Laboratory. Both sources were subsequently evaluated in EPA’s IAQ test house. The IAQ model predictions showed good agreement with the test house measurements when appropriate values were provided for source emissions, outside air exchange, in-house air movement, and deposition on “sink” surfaces.     

Control of Contaminant Emissions From Fossil Fuel-Fired Boilers

The importance of fuels combustion was brought into sharp focus recently in a report on air pollution to the United States Senate in which it was stated, “These processes replace usable air with potentially harmful pollutants, and the capability of the atmosphere to disperse and dilute these pollutants—especially in urban areas where people, vehicles, and industries congregate in even greater numbers—is strictly limited.”¹ The overwhelming burden of emissions of sulfur compounds, as well as nitrogen compounds and particulate matter in the U. S. today, originates from the burning of coal and fuel oil in stationary combustion sources. Thus, combustion has a large influence on the quality of the atmosphere in most urban areas. The air pollution effects of these contaminants are many and varied and all are objectionable and undesirable. Without a doubt, the most serious air pollution problem in the nation today is that created by the combustion of fossil fuels.     

Environmental Appraisal: And Oxides of Nitrogen Oxidants,Hydrocarbons

The relationships between criteria, standards, and control of air pollutants involve complex multidisciplinary interactions. Their over-all impact on the public health and welfare is directly related to the confidence level held by members of government, industry, and universities in the validity of the data upon which these criteria are based. The Environmental Appraisal section of the preliminary draft of the Air Quality Criteria Document “Photochemical Oxidant” prepared by the State of California, Department of Public Health, is reviewed. In general, it is a thoughtful and extensive effort to present the current status of information concerning the physical and chemical aspects of photochemical oxidant. Suggestions as to how it might be extended, revised, or updated are presented along with a brief discussion of two new research areas of possible interest, singlet molecular oxygen as a possible environmental oxidant, and the photochemistry of mixed lead halides in the atmosphere.     

Inflammatory effects of particulate matter air pollution

Environmental Science and Pollution Research - Air pollution is an important cause of non-communicable diseases globally with particulate matter (PM) as one of the main air pollutants. PM is...     

Human health effects of air pollution

Hazardous chemicals escape to the environment by a number of natural and/or anthropogenic activities and may cause adverse effects on human health and the environment. Increased combustion of fossil fuels in the last century is responsible for the progressive change in the atmospheric composition. Air pollutants, such as carbon monoxide (CO), sulfur dioxide (SO(2)), nitrogen oxides (NOx), volatile organic compounds (VOCs), ozone (O(3)), heavy metals, and respirable particulate matter (PM2.5 and PM10), differ in their chemical composition, reaction properties, emission, time of disintegration and ability to diffuse in long or short distances. Air pollution has both acute and chronic effects on human health, affecting a number of different systems and organs. It ranges from minor upper respiratory irritation to chronic respiratory and heart disease, lung cancer, acute respiratory infections in children and chronic bronchitis in adults, aggravating pre-existing heart and lung disease, or asthmatic attacks. In addition, short- and long-term exposures have also been linked with premature mortality and reduced life expectancy. These effects of air pollutants on human health and their mechanism of action are briefly discussed.     

Gaseous Emissions from Unregulated Mobile Sources

The impact of gaseous exhaust emissions is determined for the following categories of mobile sources which are currently not covered by national emission regulations: 1) farm equipment, 2) merchant vessels, 3) locomotives, 4) lawn and garden implements, 5) snowmobiles, 6) outboard motors, 7) transport refrigeration units, and 8) helicopters. Mass emission rates of each category are tabulated and compared to other emissions from both mobile and stationary sources in selected Air Quality Control Regions. Also, projections are made as to the expected increase of emissions from each source category through 1990. The results show that in the near future some categories of mobile sources will be contributing substantial amounts of pollutants, on a mass basis, in regions with critical air pollution problems. As stricter emission standards on regulated sources continue to be implemented, the relative significance of these unregulated sources will increase. The major conclusion is that broad generalizations as to the amounts of air pollution contributed by these unregulated mobile sources nationwide may be grossly misleading. The only effective way to assess their impact is on a region-by-region basis. To this end, generalized computer programs are developed which permit the estimation of each category’s present and future mass emission rates in any Air Quality Control Region in the country     

陶瓷纤维滤管在烟气净化一体化技术中的应用

在对国内外现有的一体化烟气处理工艺系统梳理的基础上,重点分析了基于陶瓷纤维滤管的烟气净化一体化技术,对其技术原理、应用特性、应用现状进行了分析总结,并以江苏某垃圾焚烧发电厂中试示范项目为例进行验证.结果表明,NOx、SO2、HCl、颗粒物、二噁英类去除效率分别为97.6％、84.1％、74.8％、>99.9％、99.9...     

Monitoring of air pollution in Indian metropolitan cities: modelling and quality indexing

Air quality in cities is the result of a complex interaction between natural and anthropogenic environmental conditions. Delhi, as well as many other cities in India, is facing problems concerning air pollution. The increase in industrialisation and the vehicle fleet, poor control on emissions and little use of catalytic converters, produce a great amount of particulate and toxic gases. Data on air pollutants and meteorological variables were collected in the metropolitan cities Delhi, Kolkata, Mumbai and Chennai for the period July–August, 2001. Data were treated with the bivariate regression model to explore the influence of the meteorological variables on air pollutant concentrations, and were also used to compute an Air Quality Index, using the weighted arithmetic mean method. The proposed index seems to be applicable in the assessment of overall air quality with respect to air pollutants.     

The Australian Air Quality Forecasting System: The Use of Green Scenarios of Motor Vehicle Usage as an Educational Tool

Abstract

The Australian Air Quality Forecasting System (AAQFS) is one of several newly emerging, high-resolution, numerical air quality forecasting systems. The system is briefly described. A public education application of the air quality impact of motor vehicle usage is explored by computing the concentration and dosage of particulate matter less than 10 µm in aerodynamic diameter (PM₁₀) for a commuter traveling to work between Geelong and Melbourne, Victoria, Australia, under “business-as-usual” and “green” scenarios. This application could be routinely incorporated into systems like AAQFS. Two methodologies for calculating the dosage are described: one for operational use and one for more detailed applications. The Clean Air Research Programme-Personal Exposure Study in Melbourne provides support for this operational methodology. The more detailed methodology is illustrated using a system for predicting concentrations due to near-road emissions of PM₁₀ andapplied in Sydney.     

A New Multipollutant,No-Threshold Air Quality Health Index Based on Short-Term Associations Observed in Daily Time-Series Analyses

Abstract

Air quality indices currently in use have been criticized because they do not capture additive effects of multiple pollutants, or reflect the apparent no-threshold concentration-response relationship between air pollution and health. We propose a new air quality health index (AQHI), constructed as the sum of excess mortality risk associated with individual pollutants from a time-series analysis of air pollution and mortality in Canadian cities, adjusted to a 0–10 scale, and calculated hourly on the basis of trailing 3-hr average pollutant concentrations. Extensive sensitivity analyses were conducted using alternative combinations of pollutants from single and multi-pollutant models. All formulations considered produced frequency distributions of the daily maximum AQHI that were right-skewed, with modal values of 3 or 4, and less than 10% of values at 7 or above on the 10-point scale. In the absence of a gold standard and given the uncertainty in how to best reflect the mix of pollutants, we recommend a formulation based on associations of nitrogen dioxide, ozone, and particulate matter of median aerodynamic diameter less than 2.5 µm with mortality from single-pollutant models. Further sensitivity analyses revealed good agreement of this formulation with others based on alternative sources of coefficients drawn from published studies of mortality and morbidity. These analyses provide evidence that the AQHI represents a valid approach to formulating an index with the objective of allowing people to judge the relative probability of experiencing adverse health effects from day to day. Together with health messages and a graphic display, the AQHI scale appears promising as an air quality risk communication tool.     

A new multipollutant, no-threshold air quality health index based on short-term associations observed in daily time-series analyses

Air quality indices currently in use have been criticized because they do not capture additive effects of multiple pollutants, or reflect the apparent no-threshold concentration-response relationship between air pollution and health. We propose a new air quality health index (AQHI), constructed as the sum of excess mortality risk associated with individual pollutants from a time-series analysis of air pollution and mortality in Canadian cities, adjusted to a 0-10 scale, and calculated hourly on the basis of trailing 3-hr average pollutant concentrations. Extensive sensitivity analyses were conducted using alternative combinations of pollutants from single and multipollutant models. All formulations considered produced frequency distributions of the daily maximum AQHI that were right-skewed, with modal values of 3 or 4, and less than 10% of values at 7 or above on the 10-point scale. In the absence of a gold standard and given the uncertainty in how to best reflect the mix of pollutants, we recommend a formulation based on associations of nitrogen dioxide, ozone, and particulate matter of median aerodynamic diameter less than 2.5 microm with mortality from single-pollutant models. Further sensitivity analyses revealed good agreement of this formulation with others based on alternative sources of coefficients drawn from published studies of mortality and morbidity. These analyses provide evidence that the AQHI represents a valid approach to formulating an index with the objective of allowing people to judge the relative probability of experiencing adverse health effects from day to day. Together with health messages and a graphic display, the AQHI scale appears promising as an air quality risk communication tool.     

Evaluating sources of indoor air pollution

Evaluation of indoor air pollution problems requires an understanding of the relationship between sources, air movement, and outdoor air exchange. Research is underway to investigate these relationships. A three-phase program is being implemented: 1) Environmental chambers are used to provide source emission factors for specific indoor pollutants; 2) An IAQ (Indoor Air Quality) model has been developed to calculate indoor pollutant concentrations based on chamber emissions data and the air exchange and air movement within the indoor environment; and 3) An IAQ test house is used to conduct experiments to evaluate the model results. Examples are provided to show how this coordinated approach can be used to evaluate specific sources of indoor air pollution. Two sources are examined: 1) para-dichlorobenzene emissions from solid moth repellant; and 2) particle emissions from unvented kerosene heaters. The evaluation process for both sources followed the three-phase approach discussed above. Para-dichlorobenzene emission factors were determined by small chamber testing at EPA's Air and Energy Engineering Research Laboratory. Particle emission factors for the kerosene heaters were developed in large chambers at the J. B. Pierce Foundation Laboratory. Both sources were subsequently evaluated in EPA's IAQ test house. The IAQ model predictions showed good agreement with the test house measurements when appropriate values were provided for source emissions, outside air exchange, in-house air movement, and deposition on "sink" surfaces.     

Synoptic evaluation of regional PM2.5 concentrations

By comparing short-term fluctuations in PM2.5 species concentrations among nearby air quality monitors and among species, it becomes possible to understand the regional and local events leading to higher concentrations. This approach was applied at thirteen sites in the Maryland area for the 2001–2006 timeframe in order to identify and explain the behavior of eighteen different analytes as well as the daily Air Quality Index.Findings included identification of local upwind events such as fireworks displays, construction and demolition, the spatial extent of sulfate, nitrate, and ammonium correlations between ground-level monitors, correlations between some crustal species to indicate similar emissions sources in urban areas, and indicators of particle adsorption as a rate-limiting step for certain species. For example, the bromine behavior suggests that bromine concentrations on particulate matter may be limited by the particle adsorption rate and thus show a dependence on the Air Quality Index measurements.     

Effects of Instrument Precision and Spatial Variability on the Assessment of the Temporal Variation of Ambient Air Pollution in Atlanta,Georgia

Abstract

Data from the U.S. Environmental Protection Agency Air Quality System, the Southeastern Aerosol Research and Characterization database, and the Assessment of Spatial Aerosol Composition in Atlanta database for 1999 through 2002 have been used to characterize error associated with instrument precision and spatial variability on the assessment of the temporal variation of ambient air pollution in Atlanta, GA. These data are being used in time series epidemiologic studies in which associations of acute respiratory and cardiovascular health outcomes and daily ambient air pollutant levels are assessed. Modified semivariograms are used to quantify the effects of instrument precision and spatial variability on the assessment of daily metrics of ambient gaseous pollutants (SO₂, CO, NO_x, and O₃) and fine particulate matter ([PM_2.5] PM_2.5 mass, sulfate, nitrate, ammonium, elemental carbon [EC], and organic carbon [OC]). Variation because of instrument imprecision represented 7–40% of the temporal variation in the daily pollutant measures and was largest for the PM_2.5 EC and OC. Spatial variability was greatest for primary pollutants (SO₂, CO, NO_x, and EC). Population–weighted variation in daily ambient air pollutant levels because of both instrument imprecision and spatial variability ranged from 20% of the temporal variation for O₃ to 70% of the temporal variation for SO₂ and EC. Wind rose plots, corrected for diurnal and seasonal pattern effects, are used to demonstrate the impacts of local sources on monitoring station data. The results presented are being used to quantify the impacts of instrument precision and spatial variability on the assessment of health effects of ambient air pollution in Atlanta and are relevant to the interpretation of results from time series health studies that use data from fixed monitors.     

A Method for Using Air Pollution Measurements and Public Opinion to Establish Ambient Air Quality Standards

Air quality was comprehensively evaluated by means of sampling at 21 locations over metropolitan Birmingham during a period of one year. Thousands of integrated samples of three common atmospheric gaseous pollutants and two common particulate pollutants were collected and analyzed. Following the year of sampling in 1964, a random household survey was completed by conducting personal interviews at more than 7200 households over metropolitan Birmingham. Statistical reduction of household survey results by census tract and by neighborhood area provided domestic fuel and waste burning emission data as well as public (resident) opinion on specific air pollution effects. The relationship between ambient air quality and neighborhood opinion of air pollution effects on health and property are evaluated statistically. Ambient standards are suggested which are based upon those air pollution levels shown to have adverse effects on approximately one-third of the people.     

Apportionment of ambient primary and secondary pollutants during a 2001 summer study in Pittsburgh using U.S. Environmental Protection Agency UNMIX

Apportionment of primary and secondary pollutants during the summer 2001 Pittsburgh Air Quality Study (PAQS) is reported. Several sites were included in PAQS, with the main site (the supersite) adjacent to the Carnegie Mellon University campus in Schenley Park. One of the additional sampling sites was located at the National Energy Technology Laboratory, located approximately 18 km southeast of downtown Pittsburgh. Fine particulate matter (PM2.5) mass, gas-phase volatile organic material (VOM), particulate semivolatile and nonvolatile organic material (NVOM), and ammonium sulfate were apportioned at the two sites into their primary and secondary contributions using the U.S. Environmental Protection Agency UNMIX 2.3 multivariate receptor modeling and analysis software. A portion of each of these species was identified as originating from gasoline and diesel primary mobile sources. Some of the organic material was formed from local secondary transformation processes, whereas the great majority of the secondary sulfate was associated with regional transformation contributions. The results indicated that the diurnal patterns of secondary gas-phase VOM and particulate semivolatile and NVOM were not correlated with secondary ammonium sulfate contributions but were associated with separate formation pathways. These findings are consistent with the bulk of the secondary ammonium sulfate in the Pittsburgh area being the result of contributions from distant transport and, thus, decoupled from local activity involving organic pollutants in the metropolitan area.     

Integrated evaluation of aerogenic pollution by air-transported heavy metals (Pb, Cd, Ni, Zn, Mn and Cu) in the analysis of the main deposit media

The composition of the ambient air is constantly changing; therefore, the monitoring of ambient air quality to detect the changes caused by aerogenic pollutants makes the essential part of general environmental monitoring. To achieve more effective improvement of the ambient air quality, the Directive 2008/50/EC on ‘Ambient Air Quality and Cleaner Air for Europe’ was adopted by the European Parliament and the European Council. It informed the public and enterprises about a negative effect of pollution on humans, animals and plants, as well as about the need for monitoring aerogenic pollutants not only at the continuous monitoring stations but also by using indicator methods, i.e. by analysing natural deposit media. The problem of determining the relationship between the accumulation level of pollutants by a deposit medium and the level of air pollution and its risks is constantly growing in importance. The paper presents a comprehensive analysis of the response of the main four deposit media, i.e. snow cover, soil, pine bark and epigeic mosses, to the long-term pollution by aerogenic pollutants which can be observed in the area of oil refinery influence. Based on the quantitative expressions of the amounts of the accumulated pollutants in the deposit media, the territory of the oil refinery investigated in this paper has been referred to the areas of mild or moderate pollution.     

Effects of instrument precision and spatial variability on the assessment of the temporal variation of ambient air pollution in Atlanta, Georgia

Data from the U.S. Environmental Protection Agency Air Quality System, the Southeastern Aerosol Research and Characterization database, and the Assessment of Spatial Aerosol Composition in Atlanta database for 1999 through 2002 have been used to characterize error associated with instrument precision and spatial variability on the assessment of the temporal variation of ambient air pollution in Atlanta, GA. These data are being used in time series epidemiologic studies in which associations of acute respiratory and cardiovascular health outcomes and daily ambient air pollutant levels are assessed. Modified semivariograms are used to quantify the effects of instrument precision and spatial variability on the assessment of daily metrics of ambient gaseous pollutants (SO2, CO, NOx, and O3) and fine particulate matter ([PM2.5] PM2.5 mass, sulfate, nitrate, ammonium, elemental carbon [EC], and organic carbon [OC]). Variation because of instrument imprecision represented 7-40% of the temporal variation in the daily pollutant measures and was largest for the PM2.5 EC and OC. Spatial variability was greatest for primary pollutants (SO2, CO, NOx, and EC). Population-weighted variation in daily ambient air pollutant levels because of both instrument imprecision and spatial variability ranged from 20% of the temporal variation for O3 to 70% of the temporal variation for SO2 and EC. Wind     

Comparative health impact assessment of local and regional particulate air pollutants in Scandinavia

The ongoing program Clean Air for Europe (CAFE) is an initiative from the EU Commission to establish a coordinated effort to reach better air quality in the EU. The focus is on particulate matter as it has been shown to have large impact on human health. CAFE requested that WHO make a review of the latest findings on air pollutants and health to facilitate assessments of the different air pollutants and their health effects. The WHO review project on health aspects of air pollution in Europe confirmed that exposure to particulate matter (PM), despite the lower levels we face today, still poses a significant risk to human health. Using the recommended uniform risk coefficients for health impact assessment of PM, regardless of sources, premature mortality related to long-range transported anthropogenic particles has been estimated to be about 3500 deaths per year for the Swedish population, corresponding to a reduction in life expectancy of up to about seven months. The influence of local sources is more difficult to estimate due to large uncertainties when linking available risk coefficients to exposure data, but the estimates indicate about 1800 deaths brought forward each year with a life expectancy reduction of about 2-3 months. However, some sectors of the population are exposed to quite high locally induced concentrations and are likely to suffer excessive reductions in life expectancy. Since the literature increasingly supports assumptions that combustion related particles are associated with higher relative risks, further studies may shift the focus for abatement strategies. CAFE sets out to establish a general cost effective abatement strategy for atmospheric particles. Our results, based on studies of background exposure, show that long-range transported sulfate rich particles dominate the health effects of PM in Sweden. The same results would be found for the whole of Scandinavia and many countries influenced by transboundary air pollution. However, several health studies, including epidemiological studies with a finer spatial resolution, indicate that engine exhaust particles are more damaging to health than other particles. These contradictory findings must be understood and source specific risk estimates have to be established by expert bodies, otherwise it will not be possible to find the most cost effective abatement strategy for Europe. We are not happy with today's situation where every strategy to reduce PM concentrations is estimated to have the same impact per unit change in the mass concentration. Obviously there is a striking need to introduce more specific exposure variables and a higher geographical resolution in epidemiology as well as in health impact assessments.     

Implementing Pollution Prevention: Incentives and Irrationalities

Widespread pollution prevention will turn on creative use of incentives, since prevention means decentralized changes in raw materials, products, production processes and disposal practices—in short, new ways of doing business—that are difficult to achieve through information transfer or regulatory mandates alone. But past experience with incentives and the context in which these approaches are used will shape both regulators’ attitudes and industry willingness to respond. Thus the choice of incentive mechanism (s) may well determine the extent to which “prevention” is implemented—as well as the extent to which implementation yields environmentally-sound rather than perverse results. Approaches now being debated could produce such perverse effects by treating recyclables as pollution and assuming all reductions towards zero are equally desirable, regardless of net risks reduced or costs incurred by waste generators. Another alternative— tradeable permits progressively reducing the amount of waste received by disposal facilities—could help agencies think through such consequences, force needed decisions on how much “prevention” of which “pollution” is appropriate, and encourage investment to reduce commercial as well as municipal waste. This alternative implies that the criteria for “appropriate prevention” are reduction in waste needing disposal and in overall environmental impact; that recycling should be equated with source reduction in waste management hierarchies, not placed on a lower rung; and that Air Toxics provisions of the pending Clean Air Act may require some adjustments if prevention is not to be aborted by the threat that voluntary reduction steps will become national requirements, for existing sources as well as new ones.