Occurrence of emerging organic contaminants in a tropical urban catchment in Singapore

The aim of this study was to test in a short term laboratory experiment the accumulation and physiological effects of As in the epiphytic lichen Xanthoria parietina. Arsenic content in treated samples increased progressively with increasing concentration in treatment solutions. Treatment of X. parietina thalli with 0.1, 1, 10 ppm As solutions caused significant decrease of viability, measured as intensity of respiratory activity, and damages to cell membranes, assessed by increase of electric conductivity of rinsing water and lipid peroxidation products. Soluble proteins content decreased and H₂O₂ content increased already at the lowest As concentration tested (0.01 ppm). Photosynthetic efficiency, measured in terms of F_V/F_M ratio, decreased significantly only at the highest As concentration (10 ppm). It was concluded that As exposure causes physiological stress both on the mycobiont and the photobiont and that cell membrane damage, expressed in terms of electric conductivity of rinsing water, is the parameter most affected by As treatment.     

Calcium protects roots of Sedum alfredii H. against cadmium-induced oxidative stress

Sedum alfredii is a well-known Cd (cadmium) hyperaccumulator native to China. The impacts of exogenous Ca on Cd-induced oxidative stress and antioxidant systems in roots of S. alfredii were investigated by using cellular and biochemical approaches. Supplementation of the medium with higher Ca levels resulted in alleviated growth inhibition and decreased Cd concentration, as well as increased Ca concentration in roots. Cadmium induced lipid peroxidation and loss of plasma membrane integrity, reactive oxygen species overproduction, as well as ultrastructural changes of root cells were largely reversed by Ca supplementation in the medium. Calcium application significantly altered the Cd effects on antioxidant enzymes and non-enzyme antioxidants (non-protein thiols), and significantly increased glutathione (GSH) biosynthesis. The results suggest that Ca is able to protect the roots of S. alfredii against Cd toxicity by restoration of Cd-displaced Ca, alleviation of the metal induced oxidative stress, as well as promotion of GSH biosynthesis.     

Xanthoria parietina as a monitor of ground-level ambient ammonia concentrations

Total nitrogen in transplanted and in situ lichen thalli of Xanthoria parietina were related to ambient ammonia air concentrations measured with passive ALPHA (Adapted Low-cost Passive High Absorption) diffusion samplers in Denmark. Transplants and ALPHA samplers were exposed four months in a transect on heathland close to a pig farm. Monthly mean ammonia concentrations declined exponentially approaching background levels after 300 m. Nitrogen content of the lichen transplants tended to decline with distance, though only a few stations were significantly different from each other. Where ammonia concentrations were high, maximum content of nitrogen was reached after one month of exposure. Conversely, at sites with background concentrations, it took several months to reach a statistically significant uptake. The correlation between ammonia concentration in the air and in situ X. parietina was significant.     

Biological effects of ammonia released from a composting plant assessed with lichens

In this study, we investigated whether ammonia emissions from industrial composting of organic waste may influence the surrounding environment, using lichens as bioindicators. To this purpose, samples of N-tolerant and N-sensitive lichens, namely Xanthoria parietina and Evernia prunastri, were transplanted for 1–3 months along transects at increasing distance (0–400 m) from a composting facility in Tuscany, Italy. Atmospheric concentrations of ammonia were measured using passive samplers. The physiological response of lichen transplants was investigated by means of the photosynthetic efficiency (measured as chlorophyll a fluorescence emission), the integrity of cell membranes (measured as electrolyte leakage), and sample viability (measured as enzymatic activity of dehydrogenase). Epiphytic lichen communities were investigated using biodiversity indices. The results showed decreasing concentrations of ammonia, from 48.7 μg/m³ at the composting facility to 2.7 μg/m³ at 400 m. The N-tolerant X. parietina was not affected and some physiological parameters even showed a higher performance, while the N-sensitive E. prunastri showed a reduced performance with increasing atmospheric concentrations approaching the source. A shift from lichen communities composed by meso-acidophilous species (actual condition) to more nitrophilous communities in the near future, approaching the composting facility is suggested. It is concluded that lichens can provide useful data for decision-makers to establish correct science-based environmentally sustainable waste management policies.     

Effects of site-specific climatic conditions on the radial growth of the lichen biomonitor <Emphasis Type="Italic">Xanthoria parietina</Emphasis>

The protocols commonly applied in surveys with lichens as biomonitors of airborne trace elements require analyses of samples derived from thalli or parts of thalli grown in the last year before sampling, under the postulation that samples of the same size are of the same age. Unfortunately, the influence of ecological site-specific factors on lichen growth is still largely ignored, so that samples of the same size collected in environmentally and climatically diverse sites might actually differ in age. This work aims at quantifying the influence of climatic conditions on the radial growth rates (RaGRs) of Xanthoria parietina, one of the most popular lichen biomonitors. RaGR was monitored in seven populations distributed along an altitudinal transect of 30 km in the Classical Karst (NE Italy), from 20 to 500 m above sea level. For c. 17 months, lobe growth was measured seasonally with a digital calliper, and site-specific climatic variables were monitored by means of thermo-hygrometric sensors and implemented by meteorological data. Finally, the lobe growth of X. parietina was modelled as a function of 18 environmental variables. Results revealed that thalli of relatively dry sites had significantly lower seasonal RaGR with respect to moister ones. Considering that cumulative precipitations were equally distributed along the transect, it was concluded that RaGR of X. parietina is affected negatively by high air temperatures and positively by high relative humidity. The importance of RaGR variation in lichen bioaccumulation studies is critically discussed.     

Biosorption of antimony(V) by freshwater cyanobacteria Microcystis from Lake Taihu,China: effects of pH and competitive ions

There is limited knowledge available on metalloid biosorption by freshwater algae. In this study, biosorption properties of anionic Sb(OH) ₆ ^? by naturally occurring cyanobacteria Microcystis were investigated as a function of initial pH, biosorbent dosage, contact time, and addition sequences of competitive ions, and their binding mechanisms were discussed. The biosorption process was fast and equilibrium was reached at 2 h. Sb(V) biosorption decreased with the increase of pH and the optimum pH range was 2.5–3.0, which corresponded with the changes of surface charges of the cell wall of Microcystis. The biosorption data satisfactorily followed the Freundlich model. The simultaneous addition of H₂PO₄ ^? and Ca²⁺ enhanced Sb(V) biosorption, while NO₃ ^? greatly inhibited the biosorption, compared with single Sb(V) addition. The initial addition of the competitive ions reduced Sb(V) biosorption at higher Sb(V) concentrations, compared with simultaneous addition. A fraction of biosorbed Sb(V) was replaced by the competitive ions which were added subsequently, and the exchange only occurred at higher concentrations of Sb(V). 1.0 mol/L HCl demonstrated the highest desorption efficiency. Speciation analyses indicated that no reduction of Sb(V) into Sb(III) occurred. Based on the results of zeta potential and attenuated total reflection infrared spectroscopy spectra, Sb(OH) ₆ ^? bound to the biomass through electrostatic attraction and surface complexation, and amino, carboxyl, and hydroxyl groups were involved in the biosorption process. The study suggest that Microcystis from cyanobacteria blooms could be used as a potential biosorbent to remove Sb(V) from effluents at environmentally relevant concentrations (≤10.0 mg/L).     

Migration and leaching risk of extraneous antimony in three representative soils of China: Lysimeter and batch experiments

Antimony (Sb) distribution, solubility and mobility onto natural soils of China were studied in lysimeter and batch experiments as a function of physicochemical properties of the soil. An outdoor lysimeter experiment investigated the leaching and migration of Sb in the soils with Sb-polluted topsoil and unpolluted subsoil over a 5 month period. Soil solutions were collected by suction cups installed at different depth of lysimeters, and leachates were regularly collected and analyzed for Sb concentrations. The majority of the added Sb was retained in the topsoil layers, but small portions were moved to the sub-layers. Sb concentrations in the soil solutions and leachates ranged from 0–755.5 (6.38 ± 54 on average) μg l⁻¹ and 0–0.45 (smaller than the detection limit) μg l⁻¹ respectively, indicating the low solubility of Sb in the soils. Batch experiments were performed in order to determine the sorption capacity and the partition coefficient (K_d). Freundlich isotherm described properly the equilibrium experimental data and results show that the K_d values for Primosol, Isohumosol, Ferrosol equal to 22.5, 87.8, 704 L kg⁻¹, respectively. These results showed the strong capacity of the soils to retain Sb, and prevent it being leached down the profile. The mobilizable Sb was in the order: Primosol > Isohumosol > Ferrosol. Sb migration in the soils was mainly associated with the exchangeable, carbonate-bound, and metal–organic complex-bound fractions. Health risk assessment indicates that Sb leaching from Ferrosol will not harm to human health through groundwater under the test conditions, while it has certain health risks from the Isohumosol and Primosol.     

Physiological effects of mercury in the lichens Cladonia arbuscula subsp. mitis (Sandst.) Ruoss and Peltigera rufescens (Weiss) Humb

This study aimed at investigating the cellular distribution of Hg in the lichens Cladonia arbuscula subsp. mitis and Peltigera rufescens treated with Hg²⁺ and at testing if Hg treatment affects selected physiological parameters. In both species, increasing Hg accumulation under increasing Hg supply in the treatment solutions was found. P. rufescens showed a higher intracellular accumulation. Photosynthetic parameters were negatively affected in both species, as indicated by the decrease in photosynthetic pigments content, photosynthetic efficiency and chlorophyll integrity. Cell membranes of both species endured damage as indicated by the increase in the concentration of products of lipid peroxidation and decrease in ergosterol content. Nevertheless, differences between the two species were found, suggesting a differential sensitivity to Hg.     

Antimony sorption at gibbsite-water interface

Antimony (Sb) is extensively used in flame retardants, lead-acid batteries, solder, cable coverings, ammunition, fireworks, ceramic and porcelain glazes and semiconductors. However, the geochemical fate of antimony (Sb) remained largely unexplored. Among the different Sb species, Sb (V) is the dominant form in the soil environment in a very wide redox range. Although earlier studies have examined the fate of Sb in the presence of iron oxides such as goethite and hematite, few studies till date reported the interaction of Sb (V) with gibbsite, a common soil Al-oxide mineral. The objective of this study was to understand the sorption behavior of Sb (V) on gibbsite as a function of various solution properties such as pH, ionic strength (I), and initial Sb concentrations, and to interpret the sorption-edge data using a surface complexation model. A batch sorption study with 20 g L⁻¹ gibbsite was conducted using initial Sb concentrations range of 2.03-16.43 μM, pH values between 2 and 10, and ionic strengths (I) between 0.001 and 0.1 M. The results suggest that Sb (V) sorbs strongly to the gibbsite surface, possibly via inner-sphere type mechanism with the formation of a binuclear monodentate surface complex. Weak I effect was noticed in sorption-edge data or in the isotherm data at a low surface coverage. Sorption of Sb (V) on gibbsite was highest in the pH range of 2-4, and negligible at pH 10. Our results suggest that gibbsite will likely play an important role in immobilizing Sb (V) in the soil environment.     

Interaction of As and Sb in the hyperaccumulator <Emphasis Type="Italic">Pteris vittata</Emphasis> L.: changes in As and Sb speciation by XANES

Arsenic (As) and antimony (Sb) are chemical analogs that display similar characteristics in the environment. The As hyperaccumulator Pteris vittata L. is a potential As–Sb co-accumulating species. However, when this plant is exposed to different As and Sb speciation, the associated accumulating mechanisms and subsequent assimilation processes of As and Sb remain unclear. A 2-week hydroponic experiment was conducted by exposing P. vittata to single AsIII, AsV, SbIII, and SbV or the co-existence of AsIII and SbIII and AsV and SbV. P. vittata could co-accumulate As and Sb in the pinna (>1000 mg kg^?1) with high translocation (>1) of As and Sb from the root to the pinna. P. vittata displayed apparent preference to the trivalent speciation of As and Sb than to the pentavalent speciation. Under the single exposure of AsIII or SbIII, the pinna concentration of As and Sb was 84 and 765 % higher than that under the single exposure of AsV or SbV, respectively. Despite the provided As speciation, the main speciation of As in the root was AsV, whereas the main speciation of As in the pinna was AsIII. The Sb in the roots comprised SbV and SbIII when exposed to SbV but was exclusively SbIII when exposed to SbIII. The Sb in the pinna was a mixture of SbV and SbIII regardless of the provided Sb speciation. Compared with the single exposure of As, the co-existence of As and Sb increased the As concentration in the pinna of P. vittata by 50–66 %, accompanied by a significant increase in the AsIII percentage in the root. Compared with the single exposure of Sb, the co-existence of Sb and As also increased the Sb concentration in the pinna by 51–100 %, but no significant change in Sb speciation was found in P. vittata.     

Adaptive alterations in the fatty acids composition under induced oxidative stress in heavy metal-tolerant filamentous fungus Paecilomyces marquandii cultured in ascorbic acid presence

The ability of the heavy metal-tolerant fungus Paecilomyces marquandii to modulate whole cells fatty acid composition and saturation in response to IC₅₀ of Cd, Pb, Zn, Ni, and Cu was studied. Cadmium and nickel caused the most significant growth reduction. In the mycelia cultured with all tested metals, with the exception of nickel, a rise in the fatty acid unsaturation was noted. The fungus exposure to Pb, Cu, and Ni led to significantly higher lipid peroxidation. P. marquandii incubated in the presence of the tested metals responded with an increase in the level of linoleic acid and escalation of electrolyte leakage. The highest efflux of electrolytes was caused by lead. In these conditions, the fungus was able to bind up to 100 mg?g^?1 of lead, whereas the content of the other metals in the mycelium was significantly lower and reached from 3.18 mg?g^?1 (Cu) to 15.21 mg?g^?1 (Zn). Additionally, it was shown that ascorbic acid at the concentration of 1 mM protected fungal growth and prevented the changes in the fatty acid composition and saturation but did not alleviate lipid peroxidation or affect the increased permeability of membranes after lead exposure. Pro-oxidant properties of ascorbic acid in the copper-stressed cells manifested strong growth inhibition and enhanced metal accumulation as a result of membrane damage. Toxic metals action caused cellular modulations, which might contributed to P. marquandii tolerance to the studied metals. Moreover, these changes can enhance metal removal from contaminated environment.     

Arsenic accumulation and speciation in the submerged macrophyte Ceratophyllum demersum L.

Introduction

Ceratophyllum demersum L. is a widespread submerged macrophyte in aquatic environments.

Methods

Simulation experiments were conducted in the laboratory to investigate arsenic (As) accumulation, speciation, and efflux of C. demersum exposed to arsenate and arsenite solutions.

Results

Plant shoots showed a significant accumulation of As with a maximum of 862 and 963???g?As?g^?1 dry weight after 4?days of exposure to 10???M arsenate and arsenite, respectively. Regardless of whether arsenate or arsenite was supplied to the plants, arsenite was the predominant species in plant shoots. Furthermore, a dramatically higher influx rate of arsenate compared with arsenite was observed in C. demersum exposed to As solutions without the addition of phosphate (P). Arsenate uptake was considerably inhibited by P in this study, suggesting that arsenate is taken up by C. demersum via the phosphate transporters. However, arsenite uptake was unaffected by P and markedly reduced in the presence of glycerol and antimonite (Sb), indicating arsenite shares the aquaporin transport pathway. In addition, C. demersum rapidly reduces arsenate to arsenite in the shoot of the plant and extrudes most of them (>60?%) to the external solutions. The efflux of arsenite was much higher than that of arsenate; the former is supposed to be both active and passive processes, and the latter through passive leakage.

Conclusion

C. demersum is a strong As accumulator and an interesting model plant to study As uptake and metabolism due to the lack of a root-to-shoot translocation barrier.     

Particle size and composition distribution analysis of automotive brake abrasion dusts for the evaluation of antimony sources of airborne particulate matter

Abrasion dusts from three types of commercially available non-steel brake pads were generated by a brake dynamometer at disk temperatures of 200, 300 and 400 °C. The number concentration of the abrasion dusts and their aerodynamic diameters (D_p) were measured by using an aerodynamic particle sizer (APS) spectrometer with high temporal and size resolution. Simultaneously, the abrasion dusts were also collected based on their size by using an Andersen low-volume sampler, and the concentrations of metallic elements (K, Ti, Fe, Cu, Zn, Sb and Ba) in the size-classified dusts were measured by ICP-AES and ICP-MS. The number distributions of the brake abrasion dusts had a peak at D_p values of 1 and 2 μm; this peak shifted to the coarse side with an increase in the disk temperature. The mass distributions calculated from the number distributions have peaks between D_p values of 3 and 6 μm. The shapes of the elemental mass distributions (Ti, Fe, Cu, Zn, Sb and Ba) in size-classified dusts were very similar to the total mass distributions of the brake abrasion dusts. These experimental results indicated that the properties of brake abrasion dusts were consistent with the characteristics of Sb-enriched fine airborne particulate matter. Based on these findings and statistical data, the estimation of Sb emission as airborne particulate matter from friction brakes was also discussed.     

Diffusive gradients in thin films,Rhizon soil moisture samplers,and indicator plants to predict the bioavailabilities of potentially toxic elements in contaminated technosols

The phytoavailabilities and potential remobilization of potentially toxic elements (PTEs) such as Zn, Pb, Cd, As, and Sb were assessed in contaminated technosols from former mining and smelting sites. The PTE concentrations in soil pore water (SPW) and diffusive gradients in thin films (DGT)-measured concentration (C _DGT) methods were used to assess the bioavailabilities of PTE and their remobilization in this study. Together with classical Chelex-100 DGT probes to measure Zn, Cd, and Pb, novel ferrihydrite-backed DGT were used for As and Sb measurements alongside with Rhizon soil moisture sampler method for SPW sampling. To assess the phytoavailabilities of PTE, a germination test with dwarf beans as a plant indicator was used for this purpose. Dwarf bean primary leaves showed high Zn concentrations in contrast to Pb and Cd which showed low phytoavailabilities. Despite As and Sb are present in high concentrations in the mine tailings, their phytoavailabilities indicate very low bioavailabilities. The amounts of Zn, Pb, Cd, As, and Sb extracted with DGT devices correlated well with the total dissolved PTE concentrations in the SPW. The highest R values were observed for Zn, followed by Cd and Pb, indicating the ability of the soil to sustain SPW concentrations, which decreased in that order. Good correlations were also observed between each of dissolved PTE concentrations in SPW, DGT-measured PTE concentrations (C _DGT), and the accumulation of PTE in dwarf bean primary leaves. It could be concluded that the use of Rhizon soil moisture samplers and DGT methods may be considered to be a good methods to predict the PTE bioavailabilities in contaminated technosols.     

Probing the distribution and contamination levels of 10 trace metal/metalloids in soils near a Pb/Zn smelter in Middle China

The horizontal and vertical distribution patterns and contamination status of ten trace metal/metalloids (Ag, Bi, Co, Cr, Ge, In, Ni, Sb, Sn, Tl) in soils around one of the largest Chinese Pb–Zn smelter in Zhuzhou City, Central China, were revealed. Different soil samples were collected from 11 areas, including ten agricultural areas and one city park area, with a total of 83 surface soil samples and six soil cores obtained. Trace metal/metalloids were determined by inductively coupled plasma–mass spectrometry after digestion by an acid mixture of HF and HNO₃. The results showed that Ag, Bi, In, Sb, Sn, and Tl contents decreased both with the distance to the Pb–Zn smelter as well as the soil depth, hinting that these elements were mainly originated from the Pb–Zn smelting operations and were introduced into soils through atmospheric deposition. Soil Ge was influenced by the smelter at a less extent, while the distributions of Co, Cr, and Ni were roughly even among most sampling sites and soil depths, suggesting that they were primarily derived from natural sources. The contamination status, as revealed by the geo-accumulation index (I _geo), indicated that In and Ag were the most enriched elements, followed by Sb, Bi, and Sn. In general, Cr, Tl, Co, Ni, and Ge were of an uncontaminated status.     

Elucidation of lead-induced oxidative stress in Talinum triangulare roots by analysis of antioxidant responses and DNA damage at cellular level

Hydroponic experiments were performed with Talinum triangulare (Jacq.) Willd. focusing the root cellular biochemistry with special emphasis on DNA damage, structural, and elemental analyses in Pb(NO₃)₂ exposed with 0, 0.25, 0.5, 0.75, 1.0, and 1.25 mM for 7 days. Lead (Pb) increased reactive oxygen species production, lipid peroxidation, protein oxidation, cell death, and DNA damage and decreased the protein content in a dose-dependent manner. Likewise, a dose-dependent induction of antioxidative enzymes superoxide dismutase and catalase by Pb was evident. Ascorbate peroxidase on the other hand responded biphasically to Pb treatments by showing induction at low (0.25 and 0.50) and repression at high (0.75–1.25 mM) concentrations. The estimation of proline content also indicated a similar biphasic trend. Scanning electron microscope and energy-dispersive X-ray spectroscopy analysis showed that 1.25 mM Pb treatment resulted in ultrastructural modifications in roots and stem tissue that was marked by the change in the elemental profile. The findings pointed to the role of oxidative stress in the underlying Pb phytotoxicity and genotoxicity in T. triangulare.     

Evaluation of an approach for the characterization of reactive and available pools of twenty potentially toxic elements in soils: Part I – The role of key soil properties in the variation of contaminants’ reactivity

Harmful effects of potentially toxic elements (PTE’s) in soils relate to their geochemically reactive fraction. To assess the degree of the reactivity, specific extractions or models are needed. Here we applied a 0.43 M HNO₃ chemical extraction to assess reactive pools of a broad range of PTE’s in 136 contaminated and non-contaminated soils. Furthermore we derived Freundlich-type models based on commonly available soil properties (pH, organic carbon and clay) as well as extended models that used other properties such as amorphous Al and Fe oxides and evaluated their possible use in risk assessment.The approach allowed to predict the reactivity of As, Hg, Co, U, Ba, Se, Sb, Mo, Li, Be (r²: 0.55–0.90) elements not previously included in such studies, as well as that of Cd, Zn, Cu, Pb, Ni and Cr (r²: 0.73–0.90). The inclusion of pH, organic carbon and clay improved the performance of all models except for Be and Mo, although the role of clay is not completely clear and requires further investigation. The ability of amorphous metal oxides to affect the reactivity of As, Hg, Cu, Ni, Cr, Sb, Mo and Li was expressed by the models in agreement with known geochemical processes leading to the retention of PTE’s by the solid matrix. Hence, such approach can be a useful tool to account for regional differences in soil properties during the identification of risk areas and constitute a significantly more powerful tool than the analysis of total pools of PTE’s in soils.     

Source identification of inorganic airborne particle fraction (PM10) at ultratrace levels by means of INAA short irradiation

Many studies have focused their attention on the determination of elements of toxicological and environmental interest in atmospheric particulate matter using analytical techniques requiring chemical treatments. The instrumental nuclear activation analysis technique allows achieving high sensitivity, good precision, and excellent limit of detection without pretreatment, also considering the problems related to the radioisotope characteristics (e.g., half-life time, interfering reactions, spectral interferences). In this paper, elements such as Al, As, Br, Cl, Cu, I, La, Mg, Mn, Na, Sb, Si, Ti, and V are studied in atmospheric PM₁₀ sampled in downtown Rome: The relative radionuclides after activation of the sample are characterized by very short (ranging from 2.24 to 37.2 min) and short (ranging from 2.58 h to 2.70 days) half-lives. Furthermore, As, Br, La, Mn, and Sb were also determined for evaluating the aerosol characteristics. The results, elaborated considering the matrix effects and the interfering reaction contribution to the radioisotope formation (e.g., ²⁸Al generated by both (n,γ) reaction from ²⁷Al and (n,p) reaction from ²⁸Si), show interesting values of As (0.3–6.1 ng m^?3), Cu (22–313 ng m^?3), Mn (17–125 ng m^?3), V (7–63 ng m^?3), higher than those determined in an area not influenced by autovehicular traffic, and significant levels of I (1–11 ng m^?3) and Ti (25–659 ng m^?3) in Rome PM₁₀. The other elements show a pattern similar to the very few data present in the literature. It should be underlined the good correlation (r ²) of Al vs. Mg (0.915) and Al vs. La (0.726), indicating a same sources for these species as well as Br–Sb showing a little lower correlation (0.623). This last hypothesis is confirmed by the study of the enrichment factors: Sb and Br may be attributed to anthropogenic sources; Cu, Cl, and I show a mixed origin (natural and anthropogenic), whereas Al, Si, Ti, Mn, Na, Mg, and As are of crustal origin. For having more information, a statistical approach based on the principal component analysis and the canonical discriminant analysis has been performed: All the samples (except one) are grouped in a cluster, and elements such as As, Br, Cu, I, La, Mn, Sb, Ti, and V are highly correlated, whereas Na and Cl and Mg and Al assemble in two different clusters. Finally, a comparison with other similar studies is reported showing interesting values for Al, As, Mg, Mn, and Ti.     

Bioadsorption and bioaccumulation of chromium trivalent in Cr(III)-tolerant microalgae: A mechanisms for chromium resistance

Anthropogenic activity constantly releases heavy metals into the environment. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. While hexavalent chromium uptake in plant cells has been reported that an active process by carrying essential anions, the cation Cr(III) appears to be taken up inactively. Dictyosphaerium chlorelloides (Dc1M), an unicellular green alga is a well-studied cell biological model organism. The present study was carried out to investigate the toxic effect of chromium exposures on wild-type Cr(III)-sensitive (Dc1M^wt) and Cr(III)-tolerant (Dc1M^Cr(III)R30) strains of these green algae, and to determine the potential mechanism of chromium resistance. Using cell growth as endpoint to determine Cr(III)-sensitivity, the IC₅₀₍₇₂₎ values obtained show significant differences of sensitivity between wild type and Cr(III)-tolerant cells. Scanning electron microscopy (SEM) showed significant morphological differences between both strains, such as decrease in cell size or reducing the coefficient of form; and transmission electron microscopy (TEM) revealed ultrastructural changes such as increased vacuolization and cell wall thickening in the Cr(III)-tolerant strain with respect to the wild-type strain. Energy dispersive X-ray analysis (SEM/XEDS) revealed that Cr(III)-tolerant D. chlorelloides cells are able to accumulate considerable amounts of chromium distributed in cell wall (bioadsorption) as well as in cytoplasm, vacuoles, and chloroplast (bio-accumulation). Morphological changes of Cr(III)-tolerant D. chlorelloides cells and the presence of these electron-dense bodies in their cell structures can be understood as a Cr(III) detoxification mechanism.     

28-Homobrassinolide mitigates boron induced toxicity through enhanced antioxidant system in Vigna radiata plants

The objective of this study was to establish relationship between boron induced oxidative stress and antioxidant system in Vigna radiata plants and also to investigate whether brassinosteroids will enhance the level of antioxidant system that could confer tolerance to the plants from the boron induced oxidative stress. The mung bean (V. radiata cv. T-44) plants were administered with 0.50, 1.0 and 2.0 mM boron at 6 d stage for 7 d along with nutrient solution. At 13 d stage, the seedlings were sprayed with deionized water (control) or 10⁻⁸ M of 28-homobrassinolide and plants were harvested at 21 d stage to assess growth, leaf gas-exchange traits and biochemical parameters. The boron treatments diminished growth, water relations and photosynthetic attributes along with nitrate reductase and carbonic anhydrase activity in the concentration dependent manner whereas, it enhanced lipid peroxidation, electrolyte leakage, accumulation of H₂O₂ as well as proline, and various antioxidant enzymes in the leaves of mung bean which were more pronounced at higher concentrations of boron. However, the follow-up application of 28-homobrassinolide to the boron stressed plants improved growth, water relations and photosynthesis and further enhanced the various antioxidant enzymes viz. catalase, peroxidase and superoxide dismutase and content of proline. The elevated level of antioxidant enzymes as well as proline could have conferred tolerance to the B-stressed plants resulting in improved growth, water relations and photosynthetic attributes.