Polychlorinated biphenyls and organochlorine pesticides in various bird species from northern China

Little data are available on organochlorine contamination in Chinese terrestrial birds of prey. This study examined the presence of PCBs, DDTs and other organochlorine pesticides in various raptors from northern China. DDE exhibited the highest concentrations among targeted compounds. Greatest levels (23.5-1020 mg/kg lipid weight) were observed in Eurasian sparrowhawks. This may be due to their stopover in southeastern China, where high DDT and dicofol applications have been documented. Residential kestrels exhibited much lower DDE, but similar PCB and HCH concentrations. ΣTEQs and PCB-126/-77 concentration ratios exhibited significant positive correlations with ΣPCB concentrations, respectively. Similar results were also demonstrated by a meta-analysis of previously published data across avian species. Possible hepatic sequestration of coplanar PCB-77, -126, -169 and -118 was observed as liver TEQs increased in Eurasian sparrowhawks. These observations may indicate an induction of CYP1A enzymes, as a result of elevated contamination in some species.     

Degradation of littoral habitats by residential development: woody debris in lakes of the Pacific Northwest and Midwest, United States

One of the least understood aspects of aquatic ecology is the role of riparian zones of lakes, and how these habitats and their functions are impacted by human development of lakeshores. We investigated the effects of residential lakeshore development on littoral coarse woody debris (CWD) distribution and on riparian forest characteristics by comparing 18 lakes in the U.S. Pacific Northwest with 16 previously surveyed lakes in the U.S. Upper Midwest. Residential development had a strong negative effect on CWD and riparian forest characteristics at both local and whole-lake scales. There was a strong positive correlation between riparian forest density and littoral CWD abundance in both regions. We found regional variation in CWD and riparian forest characteristics, mostly owing to differences in native forests. Our results suggest the role of local processes in determining CWD distribution and point to potential regional differences in littoral habitat structure associated with forest composition and lakeshore development that may have consequences for littoral-pelagic coupling in lakes.     

Seasonal variation of polycyclic aromatic hydrocarbons (PAHs) emissions in China

A regression model based on the provincial energy consumption data was developed to calculate the monthly proportions of residential energy consumption compared to the total year volume. This model was also validated by comparing with some survey and statistical data. With this model, a PAHs emission inventory with seasonal variation was developed. The seasonal variations of different sources in different regions of China and the spatial distribution of the major sources in different seasons were also achieved. The PAHs emissions were larger in the winter than in the summer, with a difference of about 1.3-folds between the months with the largest and the smallest emissions. Residential solid fuel combustion dominated the pattern of seasonal variation with the winter-time emissions as much as 1.6 times as that in the summer, while the emissions from wild fires and open fire straw burning was mainly concentrated during the spring and summer.     

Associations of residential greenness with obesity and BMI level among Chinese rural population: findings from the Henan Rural Cohort Study

In recent years, increasing evidence supports the notion that obesity risk is affected by residential greenness. However, limited studies have been established in low- and middle-income countries, especially in China. The study aimed to evaluate the associations of residential greenness with obesity and body mass index (BMI) level in Chinese rural-dwelling adults. A total of 39,259 adults from the Henan Rural Cohort Study (HRCS) were included in the analyses. According to the guideline for prevention and control of overweight and obesity in Chinese adults, obesity was defined as BMI?≥?28 kg/m². Residential greenness was measured by satellite-based normalized difference vegetation index (NDVI) and enhanced vegetation index (EVI). Generalized linear mixed models were used to study the associations between exposure to residential greenness with obesity and BMI level. Higher residential greenness was significantly correlated with lower odds of obesity and BMI level. For example, in the full-adjusted analyses, an interquartile range (IQR) increase in EVI_500-m was linked with reduced odds of obesity (OR?=?0.77, 95%CI 0.72–0.82) and BMI level (β?=????0.41 kg/m², 95%CI???0.48 to???0.33 kg/m²). Mediation analyses showed air pollution and physical activity could be potential mediators in these associations. Besides, we found that the association of NDVI_500-m with BMI was stronger in females and low-income populations. Higher residential greenness was associated with a lower prevalence of obesity and BMI level, particularly among females and the low-income population. These relationships were partially mediated by reducing air pollution and increasing physical activity.

     

Ozone removal by HVAC filters

Residential and commercial HVAC filters that have been loaded with particles during operation in the field can remove ozone from intake or recirculated air. However, knowledge of the relative importance of HVAC filters as a removal mechanism for ozone in residential and commercial buildings is incomplete. We measured the ozone removal efficiencies of clean (unused) fiberglass, clean synthetic filters, and field-loaded residential and commercial filters in a controlled laboratory setting. For most filters, the ozone removal efficiency declined rapidly but converged to a non-zero (steady-state) value. This steady-state ozone removal efficiency varied from 0% to 9% for clean filters. The mean steady-state ozone removal efficiencies for loaded residential and commercial filters were 10% and 41%, respectively. Repeated exposure of filters to ozone following a 24-h period of no exposure led to a regeneration of ozone removal efficiency. Based on a theoretical scaling analysis of mechanisms that are involved in the ozone removal process, we speculate that the steady-state ozone removal efficiency is limited by reactant diffusion out of particles, and that regeneration is due to internal diffusion of reactive species to sites available to ozone for reaction. Finally, by applying our results to a screening model for typical residential and commercial buildings, HVAC filters were estimated to contribute 22% and 95%, respectively, of total ozone removal in HVAC systems.     

Emission factors of particulate matter,polycyclic aromatic hydrocarbons,and levoglucosan from wood combustion in south-central Chile

In south-central Chile, wood stoves have been identified as an important source of air pollution in populated areas. Eucalyptus (Eucalyptus globulus), Chilean oak (Nothofagus oblique), and mimosa (Acacia dealbata) were burned in a single-chamber slow-combustion wood stove at a controlled testing facility located at the University of Concepción, Chile. In each experiment, 2.7–3.1 kg of firewood were combusted while continuously monitoring temperature, exhaust gases, burn rate, and collecting particulate matter samples in Teflon filters under isokinetic conditions for polycyclic aromatic hydrocarbon and levoglucosan analyses. Mean particulate matter emission factors were 2.03, 4.06, and 3.84 g/kg dry wood for eucalyptus, oak, and mimosa, respectively. The emission factors were inversely correlated with combustion efficiency. The mean emission factors of the sums of 12 polycyclic aromatic hydrocarbons in particle phases were 1472.5, 2134.0, and 747.5 μg/kg for eucalyptus, oak, and mimosa, respectively. Fluoranthene, pyrene, benzo[a]anthracene, and chrysene were present in the particle phase in higher proportions compared with other polycyclic aromatic hydrocarbons that were analyzed. Mean levoglucosan emission factors were 854.9, 202.3, and 328.0 mg/kg for eucalyptus, oak, and mimosa, respectively. Since the emissions of particulate matter and other pollutants were inversely correlated with combustion efficiency, implementing more efficient technologies would help to reduce air pollutant emissions from wood combustion.

Implications: Residential wood burning has been identified as a significant source of air pollution in populated areas. Local wood species are combusted for home cooking and heating, which releases several toxic air pollutants, including particulate matter, carbon monoxide, and polycyclic aromatic hydrocarbons. Air pollutant emissions depend on the type of wood and the technology and operational conditions of the wood stove. A better understanding of emissions from local wood species and wood stove performance would help to identify better biomass fuels and wood stove technologies in order to reduce air pollution from residential wood burning.     

A preliminary examination of the translocation of microencapsulated cyfluthrin following applications to the perimeter of residential dwellings

Methods have been developed to monitor the translocation of microencapsulated cyfluthrin following perimeter applications to residential dwellings. A pilot study was implemented to determine both the potential for application spray to drift away from dwellings and the intrusion of residues into homes following perimeter treatments. Residential monitoring included measuring spray drift using cellulose filter paper and the collection of soil samples from within the spray zone. In addition, interior air was monitored using fiberglass filter paper as a sorbent medium and cotton ball swabs were used to collect surface wipes. Fortification of matrixes resulted in recoveries of > 90%. Spray drift was highest at the point of application and declined to low but measurable levels 9.1 m from the foundations of dwellings. Soil residues declined to low, but measurable levels by 45 days post-application. No cyfluthrin was measured from indoor air; however, some interior surfaces had detectable levels of cyfluthrin until three days post-application. Findings indicate that spray drift resulting from perimeter applications might contaminate non-target surfaces outside the spray zone. Soil borne residues may serve as persistent sources for human exposure and potentially intrude into dwellings through the activities of occupants and pets. Residues do not appreciably translocate through air and consequently inhalation is not a likely route for human exposure. Surface residues detected indoors suggest that the physical movement of residues from the exterior to the interior might be a viable route of movement of residues following this type of application.     

The effect of a woodstove changeout on ambient levels of PM2.5 and chemical tracers for woodsmoke in Libby,Montana

Residential woodstoves are the single largest source of PM_2.5 in Libby, MT, resulting in the community being designated as a nonattainment area for PM_2.5. Beginning in 2005, a community-wide woodstove changeout program was implemented that replaced nearly 1200 old stoves with EPA-certified units. In an effort to track the reduction of woodsmoke particles throughout the program, ambient PM_2.5 samples were collected before, during, and after the changeout. These samples were analyzed for seven selected woodsmoke tracers, including vanillin, acetovanillone, guaiacol, 4-ethylguaiacol (methoxyphenols), levoglucosan (sugar anhydride), abietic acid, and dehydroabietic acid (resin acids). Results of the changeout showed that PM_2.5 levels decreased by 20% during the changeout period, while levels of the seven chosen tracer compounds gave variable responses. Levoglucosan levels decreased by 50% while both resin acids increased after the changeout, suggesting a change in the chemistry of the particles. No trend was observed in the levels of methoxyphenols as a group over the changeout period. The results suggest that the concentrations of woodsmoke related PM_2.5 in the Libby airshed have decreased; however, the chemistry of the emitted particles also changed when old woodstoves were replaced with new EPA-certified stoves.     

Effect of combustion condition on cytotoxic and inflammatory activity of residential wood combustion particles

Residential heating is an important local source of fine particles and may cause significant exposure and health effects in populations. We investigated the cytotoxic and inflammatory activity of particulate emissions from normal (NC) and smouldering (SC) combustion in one masonry heater. The PM_1–0.2 and PM_0.2 samples were collected from the dilution tunnel with a high-volume cascade impactor (HVCI). Mouse RAW 264.7 macrophages were exposed to the PM-samples for 24 h. Inflammatory mediators, (IL-6, TNFα and MIP-2), and cytotoxicity (MTT-test), were measured. Furthermore, apoptosis and cell cycle of macrophages were analyzed. The HVCI particulate samples were characterized for ions, elements and PAH compounds. Assays of elemental and organic carbon were conducted from parallel low volume samples. All the samples displayed mostly dose-dependent inflammatory and cytotoxic activity. SC samples were more potent than NC samples at inducing cytotoxicity and MIP-2 production, while the order of potency was reversed in TNFα production. SC-PM_1–0.2 sample was a significantly more potent inducer of apoptosis than the respective NC sample. After adjustment for the relative toxicity with emission factor (mg MJ^?1), the SC-PM emissions had clearly higher inflammatory and cytotoxic potential than the NC-PM emissions. Thus, operational practice in batch burning of wood and the resultant combustion condition clearly affect the toxic potential of particulate emissions.     

Effect of interior door position on room-to-room differences in residential pollutant concentrations after short-term releases

Residential interior door positions influence the pollutant concentrations that result from short-term indoor sources, such as cigarettes, candles, and incense. To elucidate this influence, we reviewed past studies and conducted new experiments in three residences: a single-story 714 m³ ranch-style house, a 510 m³ two-story split-level house, and a 200 m³ two-story house. During the experiments, we released sulfur hexafluoride or carbon monoxide tracer gas over short periods (≤30 min) and measured concentrations in the source room and at least one other (receptor) room for various interior door opening positions. We found that closing a door between rooms effectively prevented transport of air pollutants, reducing the average concentration in the receptor room relative to the source room by 57–100% over exposure periods of 1–8 h. When intervening doors were partially or fully open, the reduction in average concentrations ranged from 3% to 99%, varying as a function of door opening width and the distance between source and receptor rooms.     

A preliminary examination of the translocation of microencapsulated cyfluthrin following applications to the perimeter of residential dwellings

Abstract

Methods have been developed to monitor the translocation of microencapsulated cyfluthrin following perimeter applications to residential dwellings. A pilot study was implemented to determine both the potential for application spray to drift away from dwellings and the intrusion of residues into homes following perimeter treatments. Residential monitoring included measuring spray drift using cellulose filter paper and the collection of soil samples from within the spray zone. In addition, interior air was monitored using fiberglass filter paper as a sorbent medium and cotton ball swabs were used to collect surface wipes.

Fortification of matrixes resulted in recoveries of >90%. Spray drift was highest at the point of application and declined to low but measurable levels 9.1m from the foundations of dwellings. Soil residues declined to low, but measurable levels by 45 days post‐application. No cyfluthrin was measured from indoor air; however, some interior surfaces had detectable levels of cyfluthrin until three days post‐application.

Findings indicate that spray drift resulting from perimeter applications might contaminate non‐target surfaces outside the spray zone. Soil borne residues may serve as persistent sources for human exposure and potentially intrude into dwellings through the activities of occupants and pets. Residues do not appreciably translocate through air and consequently inhalation is not a likely route for human exposure. Surface residues detected indoors suggest that the physical movement of residues from the exterior to the interior might be a viable route of movement of residues following this type of application.     

Identification of selected hormonally active agents and animal mammary carcinogens in commercial and residential air and dust samples

In order to characterize typical indoor exposures to chemicals of interest for research on breast cancer and other hormonally mediated health outcomes, methods were developed to analyze air and dust for target compounds that have been identified as animal mammary carcinogens or hormonally active agents and that are used in commercial or consumer products or building materials. These methods were applied to a small number of residential and commercial environments to begin to characterize the extent of exposure to these classes of compounds. Phenolic compounds, including nonylphenol, octylphenol, bisphenol A, and the methoxychlor metabolite 2,2-bis(p-hydroxyphenyl)-1,1,1-trichloroethane (HPTE), were extracted, derivatized, and analyzed by gas chromatography/mass spectrometry (GC/MS)-selective ion monitoring (SIM). Selected phthalates, pesticides, polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) were extracted and analyzed by GC/MS-SIM. Residential and workplace samples showed detectable levels of twelve pesticides in dust and seven in air samples. Phthalates were abundant in dust (0.3-524 micrograms/g) and air (0.005-2.8 micrograms/m3). Nonylphenol and its mono- and di-ethoxylates were prevalent in dust (0.82-14 micrograms/g) along with estrogenic phenols such as bisphenol A and o-phenyl phenol. In this 7-sample pilot study, 33 of 86 target compounds were detected in dust, and 24 of 57 target compounds were detected in air. In a single sample from one home, 27 of the target compounds were detected in dust and 15 in air, providing an indication of chemical mixtures to which humans are typically exposed.     

Wintertime PM2.5 and PM10 Source Apportionment at Sacramento,California

ABSTRACT

The chemical mass balance (CMB) model was applied to winter (November through January) 1991–1996 PM2.5 and PM10 data from the Sacramento 13th and T Streets site in order to identify the contributions from major source categories to peak 24-hr ambient PM_2.5 and PM₁₀ levels. The average monthly PM₁₀ monitoring data for the nine-year period in Sacramento County indicate that elevated concentrations are typical in the winter months. Concentrations on days of highest PM₁₀ are dominated by the PM2.5 fraction. One factor contributing to increased PM_2.5 concentrations in the winter is meteorology (cool temperatures, low wind speeds, low inversion layers, and more humid conditions) that favors the formation of secondary nitrate and sulfate aerosols. Residential wood burning also elevates fine particulate concentrations in the Sacramento area.

The results of the CMB analysis highlight three key points. First, the source apportionment results indicate that primary motor vehicle exhaust and wood smoke are significant sources of both PM_2.5 and PM₁₀ in winter. Second, nitrates, secondarily formed as a result of motor-vehicle and other sources of nitrogen oxide (NO_x), are another principal cause of the high PM_2.5 and PM₁₀ levels during the winter months. Third, fugitive dust, whether it is resuspended soil and dust or agricultural tillage, is not the major contributor to peak winter PM_2.5 and PM10 levels in the Sacramento area.     

Effects of Heating Season on Residential Indoor and Outdoor Polycyclic Aromatic Hydrocarbons, Black Carbon, and Particulate Matter in an Urban Birth Cohort

Exposure to air pollutants has been associated with adverse health effects. However, analyses of the effects of season and ambient parameters such as ozone have not been fully conducted. Residential indoor and outdoor air levels of polycyclic aromatic hydrocarbons (PAH), black carbon (measured as absorption coefficient [Abs]), and fine particulate matter <2.5 μm (PM)(2.5) were measured over two-weeks in a cohort of 5-6 year old children (n=334) living in New York City's Northern Manhattan and the Bronx between October 2005 and April 2010. The objectives were to: 1) characterize seasonal changes in indoor and outdoor levels and indoor/outdoor (I/O) ratios of PAH (gas + particulate phase; dichotomized into Σ(8)PAH(semivolatile) (MW 178-206), and Σ(8)PAH(nonvolatile) (MW 228-278)), Abs, and PM(2.5); and 2) assess the relationship between PAH and ozone. Results showed that heating compared to nonheating season was associated with greater Σ(8)PAH(nonvolatile) (p<0.001) and Abs (p<0.05), and lower levels of Σ(8)PAH(semivolatile) (p<0.001). In addition, the heating season was associated with lower I/O ratios of Σ(8)PAH(nonvolatile) and higher I/O ratios of Σ(8)PAH(semivolatile) (p<0.001) compared to the nonheating season. In outdoor air, Σ(8)PAH(nonvolatile) was correlated negatively with community-wide ozone concentration (p<0.001). Seasonal changes in emission sources, air exchanges, meteorological conditions and photochemical/chemical degradation reactions are discussed in relationship to the observed seasonal trends.     

Distribution of PCDDs and PCDFs in Soils Collected from the Denver Front Range - Principal Components Analysis of Diffuse Dioxin Sources (10 pp)

Background, Aims and Scope The Rocky Mountain Arsenal (RMA) is a US Army facility located northeast of Denver, Colorado that has been listed on the National Priorities List (NPL). It is currently being re-mediated under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) and the Superfund Amendments and Reauthorization Act of 1986 (SARA). As part of the remediation activities at RMA, indications were found that a source of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) had existed on the RMA. As a result, investigations were undertaken to assess the possible nature and extent of any potential sources of PCDDs and PCDFs on the RMA site. In addition, other studies were conducted that examined PCDD/PCDF contamination in the Denver area. The goal of these studies was to examine nature and extent of PCDD/PCDF contamination both on the RMA as well as in the surrounding Denver area. The intent of this study was to characterize sources of dioxins (PCDDs) and dibenzofurans (PCDFs) at low environmental concentrations which might have originated from diffuse sources in the Denver Colorado area and in particular, the Rocky Mountain Arsenal (RMA) using Principal Component Analysis (PCA). Methods Over 200 soil samples were collected from the RMA and the Denver area. From the RMA, soil was collected as part of three studies that included a (1) random site-wide sampling of the RMA, (2) soils from the Western Tier Parcel (WTP), and (3) soils from Historic Use areas. Denver area soil samples were collected from five different land use categories: Residential, Agricultural, Open Space, Commercial, and Industrial. PCA was conducted on concentrations of 17 2,3,7,8-substuituted PCDD and PCDF congeners in 220 soil samples collected from the RMA and the Denver Front Range region. Results and Discussion PCA demonstrated the presence of possible minor sources of dioxins on the RMA. Current remediation efforts on RMA will result in the removal of these sources. Samples from the RMA were identified by the presence of a congener profile containing higher chlorinated PCDFs while the Denver Front Range areas were characterized by the presence of higher chlorinated PCDD congeners. The presence of a PCDF signature for the RMA samples does not necessarily indicate a major source of these contaminants on-site. Indeed, the relatively diffuse nature of the sample clusters would argue strongly against the presence of a single large source. Instead, the predominance of the PCDF congeners probably indicates the mixed industrial activities that took place on and near the site. Conclusion PCA results indicate that PCDD/PCDF profiles in soils collected from the RMA differed from those collected from the outlying Denver areas but that a major source of these contaminants was not present. Rather, the diffuse nature of sample clusters from the PCA indicated that the congener profile of RMA samples was most likely a result of the mixed industrial activities that historically have taken place on and near the site. PCA also indicated that many of the 'open area' (peripheral site-wide) RMA soils samples did not differ from Denver are reference congener profiles. This finding was also true for samples collected from the WTP that were essentially indistinguishable from Off-RMA reference samples. In addition, total TEQ concentrations in soils collected from WTP were similar to those measured in soils collected from the Denver Front Range areas indicating that lack of a major source of PCDD/PCDF within the WTP zones of the RMA. Recommendation and Outlook Analytical as well as statistical results of the soil congener data indicate that the WTP soils are indistinguishable from soils collected from non-industrial areas in the Denver area. This finding would support the recent 'de-listing' of the WTP from the other RMA areas and its' transfer to other authorities in the Denver area.     

Identification of Selected Hormonally Active Agents and Animal Mammary Carcinogens in Commercial and Residential Air and Dust Samples

ABSTRACT

In order to characterize typical indoor exposures to chemicals of interest for research on breast cancer and other hormonally mediated health outcomes, methods were developed to analyze air and dust for target compounds that have been identified as animal mammary carcinogens or hormonally active agents and that are used in commercial or consumer products or building materials. These methods were applied to a small number of residential and commercial environments to begin to characterize the extent of exposure to these classes of compounds. Phenolic compounds, including nonylphenol, octylphenol, bisphenol A, and the methoxychlor metabolite 2,2-bis (p-hydroxyphenyl)-1,1,1-trichloroethane (HPTE), were extracted, derivatized, and analyzed by gas chromatography/mass spectrometry (GC/MS)–selective ion monitoring (SIM). Selected phthalates, pesticides, polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) were extracted and analyzed by GC/MS-SIM. Residential and workplace samples showed detectable levels of twelve pesticides in dust and seven in air samples. Phthalates were abundant in dust (0.3524 μg/g) and air (0.005-2.8 μg/m³). Nonylphenol and its mono- and di-ethoxylates were prevalent in dust (0.82-14 μg/g) along with estrogenic phenols such as bisphenol A and o-phenyl phenol. In this 7-sample pilot study, 33 of 86 target compounds were detected in dust, and 24 of 57 target compounds were detected in air. In a single sample from one home, 27 of the target compounds were detected in dust and 15 in air, providing an indication of chemical mixtures to which humans are typically exposed.     

Source investigation of personal particulates in relation to identify major routes of exposure among urban residentials

Multiple 24-h average outdoor, indoor and personal respirable particulate matter (RPM) measurements were made in different urban residential colonies to determine major routes of personal exposure. The study area was Bhilai-Durg, District Durg, Chhattisgarh, India. About 100 residentials from each of two selected colonies have been surveyed for consent to participate in the study and for preparation of time–activity diary. On the basis of their time–activity diary, residentials have been categorized into three types: type-A, purely residential; type-B, residents who go out, and type-C, residence who go into work, specially in industrial area. A total of 28 adult participants (14 males and 14 females; mean age 40±15, range 21–61 years) were selected and monitored longitudinally during the summer (15 March–15 June) of 2004. Participants’ residential indoor RPM level and also local ambient outdoor RPM levels were measured,and these are done simultaneous with personal monitoring. Residential indoor and ambient outdoors RPM monitoring sessions were throughout the year to obtain infiltration factor more precisely. To compare RPM levels with Indian National Ambient Air Quality Standards (NAAQS) of PM₁₀, simultaneous measurements of PM₁₀ were also done with the course of ambient outdoor RPM monitoring. RPM levels in indoors were higher compared to ambient outdoors. The annual average ratio RPM/PM₁₀ was found to vary significantly among residential sites due to variation in surroundings. Source contribution estimates (SCE) of personal exposure to RPM in selected 12 residences (six from each colony) have been investigated using chemical mass balance model CMB8. Ambient outdoors, residential indoors, soils and road-traffic borne RPM were identified as main routes and principal sources of personal RPM. Results of model output have shown that residential indoors and soil-borne RPM are the major routes of personal exposure.     

Formaldehyde personal exposure measurements and time weighted exposure estimates in children

Residential concentrations of formaldehyde have been associated with poor respiratory health in children, where formaldehyde has been measured using stationary monitors inside homes. Although children spend most of their time indoors at home, there are few studies of children’s personal exposure to formaldehyde. The aim of this study was to investigate the relationship between personal exposure formaldehyde concentrations, microenvironmental concentrations and time weighted exposure estimates in children.Forty-one primary school children (aged between 9 and 12 years) wore a personal passive sampler over two 24 h periods in two seasons and completed 24 h daily activity diaries and a questionnaire about lifestyle and behaviour. Samplers were co located indoors at home, outdoors at centralised locations and indoors at school for the corresponding period.Personal exposure formaldehyde concentrations in this group of children were generally low with a geometric mean concentration of 9.1 ppb (range <detection limit to 27.3 ppb). There were strong correlations between personal exposure concentrations and both domestic indoor (r_s = .779, p < 0.001) and time weighted estimated (r_s = .802, p < 0.001) concentrations. The time weighted model did not improve the estimate of personal exposure compared with stationary indoor concentrations. Indoor air concentration measured with a single stationary monitor was a suitable surrogate for personal exposure.     

Sources, distribution and variability of airborne trace metals in La Plata City area, Argentina

Airborne particulate trace metals have been measured bimonthly during day and night hours in four permanent stations located in residential, industrial and commercial sectors of La Plata City region, to characterize the sources and variability of atmospheric inputs. Airborne trace metal regional averages (Pb 64 +/- 62, Cu 30 +/- 27, Mn 26 +/- 20, Zn 273 +/- 227, Fe 1183 +/- 838, Ca 5343 +/- 3614, Mg 1472 +/- 967, Cr 4.3 +/- 2.4, Ni 3.2 +/- 3.5 and Cd 0.41 +/- 0.42 ng/m3) are comparable to the values reported for not grossly polluted cities and below the general trend described for urban particulates. Two- and three-way analysis of variance and variance components tests (P < 0.05) were performed to assess the contribution of the diurnal (day vs. night), spatial (inter-station) and temporal (inter-month) components of variability. Trace metal concentrations followed the behavior of total suspended particles with higher concentrations during the day and at the Downtown station and lower at the Residential site. In general, spatial and temporal variations prevailed over diurnal differences. Spatial differences were clearly most significant for Pb, which presented higher values at the Downtown site reflecting the importance of motor exhaust inputs. In contrast, diurnal differences were more important for Mn due to increased dust resuspension during day hours. A seasonal trend with concentrations usually increasing during winter months and decreasing in spring-summer was also detected. Enrichment factors (EF) were calculated to evaluate anthropogenic versus natural element sources. High EF (21-376) were obtained for Pb, Zn, Cd and Cu reflecting the importance of anthropic inputs. The comparison with EF calculated for high-emitting vehicle particle emissions indicated that motor exhausts are the most important source of these elements in La Plata region. In contrast, the EF calculated for Mn, Cr, Ni, Ca and Mg were low (1.3-7.5) suggesting chiefly natural sources, i.e. soil-derived dusts.