Brominated flame retardant concentrations and trends in abiotic media

BFR burdens in abiotic media have been less studied than in biota, despite their essential value as an aide to identifying sources, temporal and geographic trends and exposure routes. Many polymer products consist of several percent by weight of BFRs. Global trade in these can result in rapid and wholesale BFR movement. Loss from in-use products of nonreactive BFRs may be important, particularly in respect to indoor exposure. In the case of BDE-209, discharges from publicly owned treatment works may be substantial. BFR burdens in air, water and sewage sludge respond rapidly to changes in environmental BFR inputs. PBDEs have been the most widely studied. In many locales PBDE burdens in these media now surpass those of PCBs. Air and water near sources and urban areas are typically enriched relative to rural locales. The more volatile PBDEs dominate in the vapor phase, while BDE-209 typically predominates on particulates. Evidence exists for long-range transport of the more volatile PBDEs. A greater diversity of BFRs (mostly PBDEs, HBCD and TBBP-A) has been detected in sewage sludges. Land application of these sludges on agricultural fields is one conduit for soil contamination. In general, environmental concentrations of BDE-209 appear to be increasing, while penta-BDE burdens in Europe may have peaked. Sediments function as longer-term integrators of environmental burdens. Concentrations of common BFRs therein may be substantial near point sources. Evidence for debromination in the environment has been limited to date. However, some laboratory and field observations suggest it is possible to a limited extent.     

Distribution and transportability of hexabromocyclododecane (HBCD) in the Asia-Pacific region using skipjack tuna as a bioindicator

The geographical distribution of hexabromocyclododecane (HBCD) was investigated through analysis of muscle tissue of skipjack tuna (Katsuwonus pelamis) collected from offshore waters of Asia-Pacific region (Japan, Taiwan, Philippines, Indonesia, Seychelles, Brazil, Japan Sea, East China Sea, South China Sea, Indian Ocean and North Pacific Ocean). HBCD was detected in almost all samples analyzed (<0.1 to 45 ng/g lipid weight basis), indicating widespread presence of this compound in the marine environment. Elevated concentrations of HBCD were found in skipjack tuna from areas around Japan, which have the larger modern industrial/urban societies, and implicated these areas as primary regional sources. All three individual HBCD isomers (alpha-, gamma- and beta-HBCD) were detected in almost all samples; the percentage contribution of the alpha-isomer to total HBCD increased with increasing latitude. The estimated empirical 1/2 distance for alpha-HBCD was 8500 km, which is one of the highest atmospheric transportability among various halogenated persistent organic pollutants (POPs).     

Toxic Trace Elements Associated with Airborne Particulate Matter: A Review

This article provides a concise review of published literature pertaining to sampling and analytical methodologies, aerometric studies, source identification techniques and modeling activities for the elements arsenic, cadmium, nickel, lead, vanadium, zinc, cobalt, chromium, copper, iron, mercury, manganese, selenium and antimony, and their compounds, associated with airborne particulate matter. Sampling techniques discussed include filtration and inertial separation. Analytical methodologies such as atomic absorption and atomic emission spectrometry, neutron activation analysis, and X-ray fluorescence spectrometry are summarized. Data on atmospheric levels of 14 trace elements are presented in summary form from numerous studies in remote, rural and urban areas, and generally indicate that concentrations measured at rural locations are several orders of magnitude lower than those measured for urban areas. Source identification methodologies are discussed in terms of advantages and disadvantages, and various applications are cited for the following categories: size differentiation, enrichment factors, chemical mass balance, and multivariate models. Provided that reliable trace element data are available for both the source and the receptor, chemical mass balance and multivariate methods can account for up to 80 percent of all sources contributing to the observed ambient air concentration. Wet and dry deposition processes are reviewed and environmental measurement data are provided for each element for remote, rural and urban locations. Both wet and dry deposition fluxes need to be considered for trace elements when estimating the total annual amounts of various trace elements deposited at a particular locale. Global cycles and trace element budgets are introduced in the context of the types of models currently in use. Limitations include inadequate global scale surveys of heavy metal concentrations and the lack of knowledge of sources and/or sinks.     

Hexabromocyclododecane diastereomers in fish and suspended particulate matter from selected European waters—trend monitoring and environmental quality standard compliance

The brominated flame retardant hexabromocyclododecane (HBCD) was monitored in fish and sediment (from one lake) or suspended particulate matter (SPM; from five rivers) at European freshwater sites to study the effects of reduction measures implemented by HBCD producers and users in recent years. Bream (Abramis brama) were sampled annually between 2007 and 2013 in the rivers Götaälv/SE, Rhône/FR, Western Scheldt/NL, Mersey/UK, and Tees/UK and in Lake Belau/DE. Sediment/SPM was taken every second year between 2008 and 2014. HBCD was analyzed by LC/MS/MS allowing the determination of the alpha-, beta-, and gamma-diastereomers. For most sites, a decrease in ∑HBCD was observed in fish (e.g., in the Rhône and Western Scheldt by about 80 and 60%, respectively, with significantly decreasing trends, p < 0.01). In the Rhône, HBCD also decreased in SPM. At the sampling site in the Tees which was impacted by a former HBCD point source, fish HBCD levels decreased only after a major flood event in 2013. While fish data indicate a decline in environmental HBCD concentrations at most sites with diffuse emissions, SPM data were less conclusive. The European environmental quality standard for HBCD in fish of 167 μg kg^?1 wet weight was met by all fish samples in 2013.     

PCDD/Fs and PCBs in ambient air in a highly industrialized city in Northern Italy

Ambient air samples were collected in five locations around a polychlorobiphenyl (PCB) production plant in a highly industrialized city in the north of Italy, for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) and PCBs.PCDD/F atmospheric concentrations were lower than those generally detected in urban areas, while PCB concentrations were higher than in urban and industrialized areas in other countries, especially in the locations closest to the plant. To identify source emissions responsible for air pollution we used principal component analysis (PCA) to compare the “fingerprint” of the air in Brescia with some source-related experimental and published data. This analysis showed that the PCDD/F fingerprints were more similar to steel plant emission data, while none of the PCB air patterns were comparable to emission profiles, indicating that different sources are responsible for the concentration of these two pollutants. The highest PCB concentrations detected in the areas closest to the chemical plant are indicative of its impact on the surrounding environment.     

An Efficient Gaussian-Plume Multiple-Source Air Quality Algorithm

The information presented in this paper is directed to air pollution scientists with an interest in applying air quality simulation models. RAM is the three letter designation for this efficient Gaussian-plume multiple-source air quality algorithm. RAM is a method of estimating short-term dispersion using the Gaussian steady-state model. This algorithm can be used for estimating air quality concentrations of relatively stable pollutants for averaging times from an hour to a day in urban areas from point and area sources. The algorithm is applicable for locations with level or gently rolling terrain where a single wind vector for each hour is a good approximation to the flow over the source area considered. Calculations are performed for each hour. Hourly meteorological data required are wind direction, wind speed, stability class, and mixing height. Emission information required of point sources consists of source coordinates, emission rate, physical height, stack gas volume flow and stack gas temperature. Emission information required of area sources consists of south-west corner coordinates, source area, total area emission rate and effective area source height. Computation time is kept to a minimum by the manner in which concentrations from area sources are estimated using a narrow plume hypothesis and using the area source squares as given rather than breaking down all sources to an area of uniform elements. Options are available to the user to allow use of three different types of receptor locations: 1 ) those whose coordinates are input by the user, 2) those whose coordinates are determined by thé model and are downwind óf significant point and area sources where maxima are likely to occur, and 3) those whose coordinates are determined by the model to give good area coverage of a specific portion of the region. Computation time is also decreased by keeping the number of receptors to a minimum.     

Large-scale spatial variation in mercury concentrations in cattle in NW Spain

Mercury (Hg) is a highly toxic environmental contaminant and man-made emissions account for between a quarter and a third of total atmospheric levels. Point discharges, particularly coal-burning power stations, are major sources of atmospheric Hg and can result in marked spatial variation in mercury deposition and subsequent uptake by biota. The aims of this study were to quantify the extent to which major point and diffuse sources of atmospheric Hg emissions affected accumulation of Hg by biota throughout Galicia and Asturias, two of the major regions in northwest Spain. We did this by relating renal Hg concentrations in locally reared cattle (n=284) to the proximity of animals to point and diffuse sources of Hg emissions. Mercury residues in calf kidneys ranged between non-detected and 89.4 g/kg wet weight. Point discharges from coal-fired power plants in Galicia had the most dominant impact on Hg accumulation by calves in Galicia, affecting animals throughout the region and explaining some two-thirds of the variation in renal residues between animals located directly downwind from the plants. The effects of more diffuse emission sources on Hg accumulation in calves were not distinguishable in Galicia but were detected in cattle from neighbouring Asturias. The impact of both point and diffuse sources in elevating environmental levels of bioavailable Hg and subsequent accumulation by cattle extended to approximately 140-200 km downwind from source.     

An object-oriented software for fate and exposure assessments

The model system CemoS¹ (Chemical Exposure Model System) was developed for the exposure prediction of hazardous chemicals released to the environment. Eight different models were implemented involving chemicals fate simulation in air, water, soil and plants after continuous or single emissions from point and diffuse sources. Scenario studies are supported by a substance and an environmental data base. All input data are checked on their plausibility. Substance and environmental process estimation functions facilitate generic model calculations. CemoS is implemented in a modular structure using object-oriented programming. e-mail: cemos@aphrodite.mathematik.uni-osnabrueck.de     

Methyl tertiary hexyl ether and methyl tertiary octyl ether as gasoline oxygenates: assessing risks from atmospheric dispersion and deposition

Methyl tertiary hexyl ether (MtHxE) and methyl tertiary octyl ether (MtOcE) are currently being developed as replacement oxygenates for methyl tertiary butyl ether (MtBE) in gasoline. As was the case with MtBE, the introduction of these ethers into fuel supplies guarantees their introduction into the environment as well. In this study, a screening-level risk assessment was performed by comparing predicted environmental concentrations (PEC) of these ethers to concentrations that might cause adverse effects to humans or ecosystems. A simple box model that has successfully estimated urban air concentrations of MtBE was adapted to predict atmospheric concentrations of MtHxE and MtOcE. Expected atmospheric concentrations of these ethers were also estimated using the European Union System for the Evaluation of Substances (EUSES) multimedia fate model, which simultaneously calculates PECs in the various environmental compartments of air, water, soil, and sediment. Because little or no data are available on the physicochemical, environmental, and toxicological properties of MtHxE and MtOcE, estimation methods were used in conjunction with EUSES to predict both the PECs and the concentrations at which these ethers might pose a threat. The results suggest that these ethers would contaminate the air of a moderately sized U.S. city (Boston, MA) at levels similar to those found previously for MtBE. The risk assessment module in EUSES predicted risk characterization ratios of 10(-3) and 10(-2) for MtHxE and MtOcE, respectively, in Boston, and 10(-2) and 10(-1) in very large urban centers, suggesting that these ethers pose only a minimal threat to ecosystems at the anticipated environmental concentrations. The assessment also indicates that these compounds are possible human carcinogens and that they may be present in urban air at concentrations that pose an unacceptable cancer risk. Therefore, testing of the toxicological properties of these compounds is recommended before they replace MtBE in gasoline.     

GC-MS analyses and chemometric processing to discriminate the local and long-distance sources of PAHs associated to atmospheric PM2.5

Purpose

This study presents a procedure to differentiate the local and remote sources of particulate-bound polycyclic aromatic hydrocarbons (PAHs).

Methods

Data were collected during an extended PM_2.5 sampling campaign (2009?C2010) carried out for 1?year in Venice-Mestre, Italy, at three stations with different emissive scenarios: urban, industrial, and semirural background. Diagnostic ratios and factor analysis were initially applied to point out the most probable sources. In a second step, the areal distribution of the identified sources was studied by applying the discriminant analysis on factor scores. Third, samples collected in days with similar atmospheric circulation patterns were grouped using a cluster analysis on wind data. Local contributions to PM_2.5 and PAHs were then assessed by interpreting cluster results with chemical data.

Results

Results evidenced that significantly lower levels of PM_2.5 and PAHs were found when faster winds changed air masses, whereas in presence of scarce ventilation, locally emitted pollutants were trapped and concentrations increased. This way, an estimation of pollutant loads due to local sources can be derived from data collected in days with similar wind patterns. Long-range contributions were detected by a cluster analysis on the air mass back-trajectories. Results revealed that PM_2.5 concentrations were relatively high when air masses had passed over the Po Valley. However, external sources do not significantly contribute to the PAHs load.

Conclusions

The proposed procedure can be applied to other environments with minor modifications, and the obtained information can be useful to design local and national air pollution control strategies.     

Levels and trends of brominated flame retardants in the European environment

In this paper, we review those data which have recently become available for brominated flame retardants (particularly the brominated diphenyl ethers (BDEs) and hexabromocyclododecane (HBCD)) in samples from the European environment. Environmental compartments studied comprise the atmosphere, sediments and soils, sewage sludges, and a variety of biological samples and food chains. This is currently a very active research area, and we cite over 70 studies reported in the literature during 2003-04. Findings include that the input of BDEs (especially BDE209) to the Baltic Sea by atmospheric deposition now exceeds that of PCBs by a factor of almost 40 times. Sewage sludge samples from both industrial and background locations show concentrations of BDEs, HBCD and tetrabromobisphenol-A (TBBP-A) that are of a similar order, indicating that the major source is from diffuse leaching from products into wastewater streams from users, households and industries generally. Point-sources from industries using BFRs (e.g. the textile industry) also generate local hot-spots. Sediment core studies identified the presence of two of the three PBDE formulations. The penta-mix formulation was clearly present from the beginning of the 1970s, but the deca-mix only appeared in the late 1970s. BDE183, BDE209 and HBCD were detected in peregrine falcons from Sweden and other birds feeding on terrestrial food chains. BDEs are found widely distributed in fish, including those from high mountain lakes in Europe, as a consequence of long-range atmospheric transport and deposition. A temporal trend study in archived freeze-dried mussels from the Seine estuary, France, indicated an exponential increase in BDE concentrations during the period 1982-1993, which levelled off in 1999 and 2001 and then began to decline after 2002. HBCD was detected in liver and blubber samples from harbour seals and harbour porpoises from the Wadden and North Seas, though very few animals yielded positive values for TBBP-A. There are difficulties in comparing data on summation operatorBDE from studies in which different suites of BDE congeners have been determined, and we suggest a common suite which will allow the study of all three commercial PBDE formulations.     

Passive air sampler as a tool for long-term air pollution monitoring: Part 1. Performance assessment for seasonal and spatial variations

The potential of passive air sampling devices (polyurethane foam disks) to assess the influence of local sources on the quality of the surrounding environment was investigated. DEZA Valasske Mezirici, a coal tar and mixed tar oils processing plant, and Spolana Neratovice, a chemical factory with the history of high production of organochlorinated pesticides (OCPs), were selected as the point sources of PAHs, and OCPs, respectively. Levels of PCBs, OCPs and PAHs were determined for all sampling sites and sampling periods. The study brought useful data about the air concentrations of POPs in the investigated regions. More important, it provided information on the transport and fate of POPs in the vicinity of local sources of contamination useful for the estimation of their influence. Very good capability of passive samplers to reflect temporal and spatial fluctuation in concentrations of persistent organic pollutants in the ambient air was confirmed which makes them applicable for monitoring on the local scale.     

Application of an integrated Weather Research and Forecasting (WRF)/CALPUFF modeling tool for source apportionment of atmospheric pollutants for air quality management: A case study in the urban area of Benxi,China

In this study, the authors endeavored to develop an effective framework for improving local urban air quality on meso-micro scales in cities in China that are experiencing rapid urbanization. Within this framework, the integrated Weather Research and Forecasting (WRF)/CALPUFF modeling system was applied to simulate the concentration distributions of typical pollutants (particulate matter with an aerodynamic diameter <10 μm [PM₁₀], sulfur dioxide [SO₂], and nitrogen oxides [NO_x]) in the urban area of Benxi. Statistical analyses were performed to verify the credibility of this simulation, including the meteorological fields and concentration fields. The sources were then categorized using two different classification methods (the district-based and type-based methods), and the contributions to the pollutant concentrations from each source category were computed to provide a basis for appropriate control measures. The statistical indexes showed that CALMET had sufficient ability to predict the meteorological conditions, such as the wind fields and temperatures, which provided meteorological data for the subsequent CALPUFF run. The simulated concentrations from CALPUFF showed considerable agreement with the observed values but were generally underestimated. The spatial-temporal concentration pattern revealed that the maximum concentrations tended to appear in the urban centers and during the winter. In terms of their contributions to pollutant concentrations, the districts of Xihu, Pingshan, and Mingshan all affected the urban air quality to different degrees. According to the type-based classification, which categorized the pollution sources as belonging to the Bengang Group, large point sources, small point sources, and area sources, the source apportionment showed that the Bengang Group, the large point sources, and the area sources had considerable impacts on urban air quality. Finally, combined with the industrial characteristics, detailed control measures were proposed with which local policy makers could improve the urban air quality in Benxi. In summary, the results of this study showed that this framework has credibility for effectively improving urban air quality, based on the source apportionment of atmospheric pollutants.

Implications: The authors endeavored to build up an effective framework based on the integrated WRF/CALPUFF to improve the air quality in many cities on meso-micro scales in China. Via this framework, the integrated modeling tool is accurately used to study the characteristics of meteorological fields, concentration fields, and source apportionments of pollutants in target area. The impacts of classified sources on air quality together with the industrial characteristics can provide more effective control measures for improving air quality.

Through the case study, the technical framework developed in this study, particularly the source apportionment, could provide important data and technical support for policy makers to assess air pollution on the scale of a city in China or even the world.     

Impact of biomass burning on urban air quality estimated by organic tracers: Guangzhou and Beijing as cases

The impacts of biomass burning have not been adequately studied in China. In this work, chemical compositions of volatile organic compounds and particulate organic matters were measured in August 2005 in Beijing and in October 2004 in Guangzhou city. The performance of several possible tracers for biomass burning is compared by using acetonitrile as a reference compound. The correlations between the possible tracers and acetonitrile show that the use of K⁺ as a tracer could result in bias because of the existence of other K⁺ sources in urban areas, while chloromethane is not reliable due to its wide use as industrial chemical. The impact of biomass burning on air quality is estimated using acetonitrile and levoglucosan as tracers. The results show that the impact of biomass burning is ubiquitous in both suburban and urban Guangzhou, and the frequencies of air pollution episodes significantly influenced by biomass burning were 100% for Xinken and 58% for downtown Guangzhou city. Fortunately, the air quality in only 2 out of 22 days was partly impacted by biomass burning in August in Beijing, the month that 2008 Olympic games will take place. The quantitative contribution of biomass burning to ambient PM2.5 concentrations in Guangzhou city was also estimated by the ratio of levoglocusan to PM2.5 in both the ambient air and biomass burning plumes. The results show that biomass burning contributes 3.0–16.8% and 4.0–19.0% of PM2.5 concentrations in Xinken and Guangzhou downtown, respectively.     

Methyl Tertiary Hexyl Ether and Methyl Tertiary Octyl Ether as Gasoline Oxygenates: Assessing Risks from Atmospheric Dispersion and Deposition

Abstract

Methyl tertiary hexyl ether (MtHxE) and methyl tertiary octyl ether (MtOcE) are currently being developed as replacement oxygenates for methyl tertiary butyl ether (MtBE) in gasoline. As was the case with MtBE, the introduction of these ethers into fuel supplies guarantees their introduction into the environment as well. In this study, a screening-level risk assessment was performed by comparing predicted environmental concentrations (PEC) of these ethers to concentrations that might cause adverse effects to humans or ecosystems. A simple box model that has successfully estimated urban air concentrations of MtBE was adapted to predict atmospheric concentrations of MtHxE and MtOcE. Expected atmospheric concentrations of these ethers were also estimated using the European Union System for the Evaluation of Substances (EUSES) multimedia fate model, which simultaneously calculates PECs in the various environmental compartments of air, water, soil, and sediment. Because little or no data are available on the physicochemical, environmental, and toxicological properties of MtHxE and MtOcE, estimation methods were used in conjunction with EUSES to predict both the PECs and the concentrations at which these ethers might pose a threat. The results suggest that these ethers would contaminate the air of a moderately sized U.S. city (Boston, MA) at levels similar to those found previously for MtBE. The risk assessment module in EUSES predicted risk characterization ratios of 10^?3 and 10^?2 for MtHxE and MtOcE, respectively, in Boston, and 10^?2 and 10^?1 in very large urban centers, suggesting that these ethers pose only a minimal threat to ecosystems at the anticipated environmental concentrations. The assessment also indicates that these compounds are possible human carcinogens and that they may be present in urban air at concentrations that pose an unacceptable cancer risk. Therefore, testing of the toxicological properties of these compounds is recommended before they replace MtBE in gasoline.     

Air ion concentrations in various urban outdoor environments

Atmospheric ions are produced by many natural and anthropogenic sources and their concentrations vary widely between different environments. There is very little information on their concentrations in different types of urban environments, how they compare across these environments and their dominant sources. In this study, we measured airborne concentrations of small ions, particles and net particle charge at 32 different outdoor sites in and around a major city in Australia and identified the main ion sources. Sites were classified into seven groups as follows: park, woodland, city centre, residential, freeway, power lines and power substation. Generally, parks were situated away from ion sources and represented the urban background value of about 270 ions cm^?3. Median concentrations at all other groups were significantly higher than in the parks. We show that motor vehicles and power transmission systems are two major ion sources in urban areas. Power lines and substations constituted strong unipolar sources, while motor vehicle exhaust constituted strong bipolar sources. The small ion concentration in urban residential areas was about 960 cm^?3. At sites where ion sources were co-located with particle sources, ion concentrations were inhibited due to the ion-particle attachment process. These results improved our understanding on air ion distribution and its interaction with particles in the urban outdoor environment.     

Seasonal and spatial variation of diffuse (non-point) source zinc pollution in a historically metal mined river catchment, UK

Quantifying diffuse sources of pollution is becoming increasingly important when characterising river catchments in entirety - a prerequisite for environmental management. This study examines both low and high flow events, as well as spatial variability, in order to assess point and diffuse components of zinc pollution within the River West Allen catchment, which lies within the northern England lead-zinc Orefield. Zinc levels in the river are elevated under all flow regimes, and are of environmental concern. Diffuse components are of little importance at low flow, with point source mine water discharges dominating instream zinc concentration and load. During higher river flows 90% of the instream zinc load is attributed to diffuse sources, where inputs from resuspension of metal-rich sediments, and groundwater influx are likely to be more dominant. Remediating point mine water discharges should significantly improve water quality at lower flows, but contribution from diffuse sources will continue to elevate zinc flux at higher flows.     

Distribution of hexabromocyclododecane in Detroit River suspended sediments

The distribution of hexabromocyclododecane (HBCD) isomers (alpha, beta and gamma) was determined in Detroit River suspended sediments using liquid chromatography tandem mass spectrometry (LC/MS/MS). Individual isomers of HBCD were measured at concentrations ranging from <0.025 to 1.9 ng/g (dry wt.) for the alpha-isomer, <0.025 to 0.28 ng/g for the beta-isomer, and <0.025 to 2.3 ng/g for the gamma-isomer. Concentrations of total HBCD ranged from <0.075 to 3.7 ng/g. Roughly two-thirds of HBCD profiles in suspended sediments were dominated by the gamma-isomer, and were similar to profiles of commercial technical mixtures. Profiles in the remaining samples were dominated by the alpha-isomer. The beta-isomer was consistently detected at substantially lower levels than the other isomers; this isomer is a minor constituent in the commercial technical mixtures. Seasonal sampling showed significant shifts in the relative ratios of the HBCD isomers. The spatial distribution of HBCD in the Detroit River was similar to other persistent organic pollutants (e.g., PCBs), and showed a strong association with urban/industrial activities in the watershed. However, the highest HBCD concentrations (2.6-3.7 ng/g) were associated with areas of contemporary industrial activity, and were much lower than maximum concentrations of PCBs (2.2 microg/g) found in areas of the Detroit River associated with historical industrial activity.     

Meta-analysis of environmental contamination by phthalates

Phthalate acid esters (PAE), commonly named phthalates, are toxics classified as endocrine-disrupting compounds; they are primarily used as additives to improve the flexibility in polyvinyl chloride. Many studies have reported the occurrence of phthalates in different environmental matrices; however, none of these studies has yet established a complete overview for those compounds in the water cycle within an urban environment. This review summarizes PAE concentrations for all environmental media throughout the water cycle, from atmosphere to receiving waters. Once the occurrences of compounds have been evaluated for each environmental compartment (urban wastewater, wastewater treatment plants, atmosphere, and the natural environment), we reviewed data in order to identify the fate of PAE in the environment and establish whether geographical and historical trends exist. Indeed, geographical and historical trends appear between Europe and other countries such as USA/Canada and China, however they remain location dependent. This study aimed at identifying both the correlations existing between environmental compartments and the processes influencing the fate and transport of these contaminants into the environment. In Europe, the concentrations measured in waterways today represent the background level of contamination, which provides evidence of a past diffuse pollution. In contrast, an increasing trend has actually been observed for developing countries, especially for China.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 4. A Three-Parameter Averaging-Time Model

Urban air pollutant concentration data often tend to fit a two-parameter averaging-time model having three characteristics: (1) pollutant concentrations are (two-parameter) lognormally distributed for all averaging times; (2) median concentrations are proportional to averaging time raised to an exponent; and (3) maximum concentrations are approximately inversely proportional to averaging time raised to an exponent. Concentration data obtained near many isolated point sources and in some urban areas often do not fit a two-parameter lognormal distribution. An increment (either positive or negative) can be added to each such concentration in order to fit the data instead to a three-parameter lognormal distribution. This increment has been incorporated as the third parameter in a new three-parameter averaging-time model that can be used in both point-source and urban settings. Examples show how this new model can be used to analyze SO₂ concentration data obtained near a point source to determine the degree of emission reduction needed to achieve the national ambient air quality standards.