Biodegradability and ecotoxicity of amine oxide based surfactants

The aerobic and anaerobic biodegradability as well as the aquatic toxicity of two fatty amine oxides and one fatty amido amine oxide were investigated. Aerobic biodegradation was evaluated using the CO(2) headspace test (ISO 14593) and biodegradation under anaerobic conditions was assessed employing a standardised batch test. The three amine oxide based surfactants tested were readily biodegradable under aerobic conditions but only the alkyl amido amine oxide was found to be easily biodegradable under anaerobic conditions. Toxicity to Photobacterium phosphoreum and Daphnia magna was evaluated. Bacteria (EC(50) from 0.11 to 11 mg l(-1)) proved to be more sensitive to the toxic effects of the amine oxide based surfactants than crustacea (IC(50) from 6.8 to 45 mg l(-1)). The fatty amido amine oxide showed the lowest aquatic toxicity.     

Effect of the alkyl chain length on the anaerobic biodegradability and toxicity of quaternary ammonium based surfactants

The anaerobic biodegradability and toxicity to methanogenic gas production of different alkyl chain length homologs of quaternary ammonium based surfactants were examinated. Two series of these cationic surfactants were selected: alkyl trimethyl ammonium and alkyl benzyl dimethyl ammonium compounds. A simple anaerobic gas production test containing municipal digester solids as a source of anaerobic bacteria was used. Under the applied methanogenic conditions, the cationic surfactants tested showed a very poor primary biodegradation and no evidence of any extent of ultimate biodegradation was observed. The toxicity of quaternary ammonium based surfactants to methanogenic gas production decreased with increasing the alkyl chain length.     

A method for measuring the anoxic biodegradability under denitrifying conditions

A test for assessing the anoxic biodegradability of organic compounds under denitrifying conditions is proposed. The method is based on the recovery and quantification of the CO2 produced, which is evidence of complete biodegradation of the test compound (added as the sole carbon source). The tests were carried out in a mineral medium, with nitrate as electron acceptor. Whole lake sediments, sediment extracts and a commercial inoculum were assayed as a possible inoculum source by means of glucose biodegradability tests. It was found that the sediment extracts constitute a suitable and environmentally-relevant inoculum source, since they add non-significant amounts of carbon to the tests. Two xenobiotic compounds, namely, aniline and phenol, were tested in the aforementioned conditions as well as in a standard aerobic biodegradability test. Both aniline and phenol attained a biodegradation level higher than 60% in a short time period (<28 days) and thus can be considered as readily biodegradable in denitrifying environments. Nevertheless, the kinetics obtained in the anoxic test were slower than in aerobic conditions, and even suggested the accumulation of intermediate metabolites in the case of phenol. The results of this study indicate that the fate of xenobiotic compounds under anoxic conditions differs from that observed in an oxic environment, and therefore it should be considered by standard biodegradability testing procedures.     

4种脂肪酸浮选捕收剂的生物降解性能研究

在好氧的条件下,以活性污泥为接种体,使用改良斯特姆法测试脂肪酸浮选捕收剂(油酸钠、9-羟基硬脂酸钠、硬脂酸钠、蓖麻油酸钠)的生物降解性能,并与利用BOD5/COD进行的可生化评价方法进行比较。结果表明:(1)油酸钠、蓖麻油酸钠的BOD5/COD分别为0.54、0.63,属易生物降解物质;9-羟基硬脂酸钠、硬脂酸钠的BOD5/COD分别为0.36、0.37,属可生物降解物质。(2)油酸钠、9-羟基硬脂酸钠、蓖麻油酸钠28d的生物降解率分别为88.6%、62.2%、100.0%,达到了经济合作与发展组织的OECD-301B生物降解性能实验标准,属于易生物降解物质;硬脂酸钠28d的生物降解率为49.8%,没有达到OECD-301B生物降解性能实验标准,属难生物降解物质。4种脂肪酸浮选捕收剂的生物降解性能依次为:蓖麻油酸钠油酸钠9-羟基硬脂酸钠硬脂酸钠。(3)当有机酸中存在碳碳双键和羟基时,有机酸的生物降解性能都会提高,并且碳碳双键的影响要大于羟基的影响;当二者同时存在时,生物降解性能会大幅度提高。     

Anaerobic degradation and toxicity of commercial cationic surfactants in anaerobic screening tests

Anaerobic biodegradability and toxicity on anaerobic bacteria of di(hydrogenated tallow) dimethyl ammonium chloride (DHTDMAC) and two esterquats have been investigated. A batch test system containing municipal digester solids as a source of anaerobic bacteria, based on the method proposed by the ECETOC, has been applied. To evaluate the potential toxicity of such surfactants on anaerobic sludge, a co-substrate, an easily biodegradable compound in anaerobic conditions, has been added to the samples to test and the effects on biogas production have been determined. For the esterquats studied high biodegradation levels were obtained and no toxic effects on anaerobic bacteria were observed even at the highest concentrations tested, 100 and 200 mg C/l, respectively. On the contrary, DHTDMAC was not degradated at the same test conditions. However, no inhibitory effects on the biogas production were detected for this surfactant at concentrations <100 mg C/l.     

Testing biodegradability with standardized methods

Laboratory test methods are used by industry laboratories to determine biodegradability, an important parameter for the evaluation of the ecological behaviour of substances. Biodegradability has a key role due to the simple fact that a degradable substance will cause no long term risk in the environment. The great variety of biodegradation processes in the natural environment and in technical plants for treating waste water and solid wastes gave rise to a rather large number of test methods based on different test principles. To guarantee the acceptance of the test results by authorities and customers internationally standardized methods (ISO, OECD) and established quality criteria (GLP, EN 45000, ISO 9000) are used.     

Anaerobic inhibition and biodegradation of antibiotics in ISO test schemes

Municipal sewage is the main exposure route for antibiotics that are used in human medical care. Antibiotics that adsorb to the primary sludge and/or sur-plus activated sludge will enter the anaerobic digesters of municipal sewage treatment plants. Here anaerobic biodegradation or inhibition of anaerobic bacteria resulting in a disturbance of the process might occur. ISO standards 13641 (2003) and 11734 (1999) were used for assessing the anaerobic inhibition of 16 and the anaerobic biodegradability of 9 antibiotics respectively. Digestion sludge from a municipal sewage treatment plant (1g/l d.s.) was used as inoculum in both tests. In ISO 13641 (2003) most antibiotics showed only moderate inhibition effects after a 7 day incubation period, with EC50 values between 24 mg/l and more than 1000 mg/l (equal to mg/g d.s.). In contrast, metronidazol was decisively toxic to anaerobic bacteria with an EC50 of 0.7 mg/l. In the anaerobic degradation tests according to ISO standard 11734 (1995), only benzylpenicillin showed certain ultimate biodegradation after 60 days and most antibiotics inhibited the digesting sludge in the respective parallel tested inhibition controls. Thus the inhibition of anaerobic bacteria by antibiotics observed in the degradation tests was higher than expected from the results of the inhibition tests. The possible explanations are that distinct substrates are used (yeast extract versus sodium benzoate), that the digestion sludge loses activity during the washing steps performed for the degradation tests and that the exposure time in the degradation tests was 8 times longer than in the inhibition test.     

Biodegradation of diesel oil by cold-adapted microorganisms in presence of sodium dodecyl sulfate.

The effect of different concentrations of the anionic surfactant sodium dodecyl sulfate (SDS) on biodegradation of diesel oil was assessed during 32 days at 10 degrees C, under simulated environmental conditions, in liquid culture and in an alpine soil. Low SDS concentrations (50-100 mg l-1) significantly enhanced oil biodegradation by a psychrotrophic inoculum in liquid culture, whereas higher SDS concentrations (500-1000 mg l-1) inhibited hydrocarbon biodegradation. Oil biodegradation by the indigenous microorganisms in soil was inhibited at all SDS concentrations tested. The surfactant itself was rapidly biodegraded both in liquid culture and in soil.     

A new bioseed for determination of wastewater biodegradability: analysis of the experimental procedure

A new bioassay proposed in the patent P201300029 was applied to a pre-treated wastewater containing a mixture of commercial pesticides to simulate a recalcitrant industrial wastewater in order to determine its biodegradability. The test uses a mixture of standardized inoculum of the lyophilized bacteria Pseudomonas putida with the proper proportion of salts and minerals. The results highlight that biodegradation efficiency can be calculated using a gross parameter (chemical oxygen demand (COD)) which facilitates the biodegradability determination for routine water biodegradability analysis. The same trend was observed throughout the assay with the dehydrated and fresh inoculums, and only a difference of 5 % in biodegradation efficiency (E _f) was observed. The obtained results showed that the P. putida biodegradability assay can be used as a commercial test with a lyophilized inoculum in order to monitor the ready biodegradability of an organic pollutant or a WWTP influent. Moreover, a combination of the BOD₅/COD ratio and the P. putida biodegradability test is an attractive alternative in order to evaluate the biodegradability enhancement in water pre-treated with advanced oxidation processes (AOPs).     

Determination of the aerobic biodegradability of polymeric material in aquatic batch tests

Results of an international ring-test of two laboratory methods are presented for investigating the biodegradability of organic polymeric test materials in aquatic test systems based on respirometry and the evolution of carbon dioxide. These methods are developed further from the well-known standardized biodegradation tests ISO 9408 (1999) and ISO 9439 (1999), which have been successfully used for many years. The most important improvements are the extension of the test period up to six months, the increase of the buffer capacity and nutrient supply of the inorganic medium, an optimization of the inoculation, and optionally, the possibility of a carbon balance. A ring test, organized by the International Biodeterioration Research Group (IBRG), was run using a poly(,-caprolactone)-starch blend and an aliphatic-aromatic co-polyester as test materials and a microcrystalline cellulose powder as a reference material. The test results and the experience gained by the participants showed that the methods are suitable and practicable. The test methods have been meanwhile established as standards ISO 14851 (1999) and ISO 14852 (1999).     

Adaptation of the CAS test system and synthetic sewage for biological nutrient removal. Part II: design and validation of test units

A global increase in biological nutrient removal (BNR) applications in wastewater treatment and concern for potential effects of anthropogenic substances on BNR processes resulted in the adaptation of the Continuous Activated Sludge (CAS) laboratory test system (cf. guideline OECD 303A or ISO 11733). In this paper two novel systems are compared to the standard CAS unit: the Behrotest KLD4 and a University of Cape Town system (CAS-UCT). Both are 'single sludge' systems with an anoxic/aerobic and an anaerobic/anoxic/aerobic configuration, respectively. They both can simulate the essential processes of full-scale BNR installations. The units where fed with a specially designed synthetic sewage, Syntho (cf. Part I of this study), or its precursor BSR3 medium. The performance of the two new units was benchmarked against the standard CAS system in terms of carbon/nitrogen/phosphorus (C/N/P) removal, as well as primary biodegradation of the surfactants linear alkylbenzene sulfonate (LAS) and glucose amide (GA). Both systems allow to easily achieve stable excess N- and P-removal. Experimental C/N/P removal data compared closely with simulations obtained with the IAWQ Activated Sludge Model No. 2 (ASM2), and with full scale BNR plants with a similar configuration. In both units the effluent concentrations of the surfactants tested were significantly reduced in comparison to the standard CAS system (up to 50% less). No adverse effects on BNR were noted for the test surfactants dosed at 400 microg/l together with an overall surfactant background concentration in the feed of ca. 20 mg/l. The proposed systems hold potential to complement the standard CAS system for situations where advanced sewage treatment plants with BNR need to be simulated in the laboratory with minimum effort.     

Fate and effect of monoalkyl quaternary ammonium surfactants in the aquatic environment

The effect of the alkyl chain of quaternary ammonium-based surfactants on their aquatic toxicity and aerobic biodegradability has been studied. Two families of monoalkylquats surfactants were selected: alkyl trimethyl ammonium and alkyl benzyl dimethyl ammonium halides. Acute toxicity tests on Daphnia magna and Photobacterium phosphoreum were carried out and EC50 values in the range of 0.1-1 mg/l were obtained for the two series of cationic surfactants. Although the substitution of a benzyl group for a methyl group increases the toxicity, an incremental difference in toxicity between homologs of different chain length were not observed. Biodegradability of the different homologs was determined not only in standard conditions but also in coastal water, both tests yielding similar results. An increase in the alkyl chain length or the substitution of a benzyl group for a methyl group reduces the biodegradation rate. The degradation of these compounds in coastal waters was associated with an increase in bacterioplankton density, suggesting that the degradation takes place because the compound is used as a growth substrate.     

Influence of surfactants on solubilization and fungal degradation of fluorene

Eighteen fungal strains were tested in toxicity assays with surfactants in order to select surfactants and strains tolerant to surfactants for degradation assays. Two nonionic surfactants were used, an alkylphenol ethoxylate, Triton X-100, a sorbitan ester, Tween 80 and an anionic surfactant, sodium dodecyl sulfate. Solubilization and biodegradation tests were conducted in liquid medium batch; fluorene was quantified by HPLC. Results showed the enhancement of fluorene solubilization by the three surfactants, good tolerance of nonionic surfactants by the fungal strains and the enhancement of the biodegradation of fluorene by Doratomyces stemonitis (46-62%) and Penicillium chrysogenum (28-61%) in the presence of Tween 80 (0.324 mM) after 2 days.     

Biodegradability of surfactants and inhibition of surfactants to biodegradation of other pollutants

Changes of BOD/TOD and DOC with time were obtained for solutions of 9 synthetic surfactants and 2 fatty acid salts under various conditions. The cationic surfactants, ABM and ABDM, were not biodegraded at all and inhibited the biodegradation of a synthetic sewage. LAS was not biodegraded at concentration of 30 mg/l and higher and inhibited the biodegradation of the sewage.     

Mixtures of quaternary ammonium compounds and anionic organic compounds in the aquatic environment: Elimination and biodegradability in the closed bottle test monitored by LC-MS/MS

Quaternary ammonium compounds (QACs) are widely used as disinfectants, detergents and fabric softeners. Anionic detergents are one of the most widely used chemical substances. QACs and anionic surfactants can form ionic pairs. In the present study we investigated the biodegradability of QACs in the presence of different anionic surfactants. The biodegradability of three QACs, namely benzalkonium chloride (BAC), didecyldimethylammonium chloride (DDMAC) and ethacridine lactate (EL), when applied as single substances and in combination with anionic surfactants such as benzene sulfonic acid (BSA), LAS, naphthalene sulfonic acid (NSA) and sodium dodecylsulfonate (SDS) was studied applying the closed bottle test (CBT) [OECD 301D, 1992. Guidelines for Testing of Chemicals. Closed bottle test. Organisation of Economic Cooperation and Development, Paris] at a ratio of 1:1 (mol:mol). Biodegradation was monitored by measuring oxygen concentration in the test vessels with an oxygen electrode in accordance with international standard methods [ISO 5414, 1990. Water quality - determination of dissolved oxygen. In: German Standard Methods for the Examination of Water, Wastewater and Sludge. VCH Verlagsgesellschaft, Weinheim, New York, Basel Cambridge]. Primary elimination of the QACs and of LAS was monitored by LC-MS/MS. There was little biodegradability of the QACs as either single compounds or in the presence of organic counter ions. The biodegradability of the organic counter ions was lower in the presence of QACs as compared to the single substances. Primary elimination of the QACs by sorption took place.     

Ultimate biodegradation and elimination of antibiotics in inherent tests

The biodegradation and elimination of antibiotics in municipal wastewater treatment plants is of particular concern because sewage is the main exposure route for antibiotics used in human medicine. The inherent biodegradability of 17 antibiotics was determined in a combined test design based on the Zahn-Wellens test (OECD 302 B, 1992) and the CO2-evolution test (OECD 301 B, 1992). CO2 Evolution test (Modified Sturm test). OECD Guideline for the Testing of Chemicals, Paris). Only benzylpenicillin sodium salt (Penicillin G) proved to be ultimately biodegradable, reaching ThCO2 degradation extents of 78-87%. Among the others, only amoxicillin, imipenem and nystatin showed certain ultimate biodegradation in few of the parallel flasks and can be regarded as partially biodegradable with formation of stable metabolites. The DOC-elimination of tetracycline-HCl showed a typical degradation curve starting with 18% and reaching the plateau phase at 80% after 21 days. Nevertheless, the CO2-evolution measured in parallel did not support the data, indicating that the time needed for reaching the adsorption equilibrium was underestimated. Several other antibiotics showed considerable DOC-elimination in the inherent test while only minor incidences of ultimate biodegradation were observed. The combination of CO2-evolution and DOC-elimination is a suitable instrument for assessing the behaviour of chemicals within one test. It enables one to assess both inherent ultimate biodegradability and DOC-elimination by sorption. The applicability of the test is limited to substances with a moderate toxicity.     

Biological and photochemical degradation rates of diethylenetriaminepentaacetic acid (DTPA) in the presence and absence of Fe(III)

The environmental fate of ethylenediaminetetraacetic acid (EDTA) has been extensively studied, while much less is known about the environmental behaviour of diethylenetriaminepentaacetic acid (DTPA). In this study, it was confirmed that DTPA is persistent toward biodegradation. The biodegradability of DTPA was investigated in the absence and in the presence of Fe(III) by using CO2 evolution test and Manometric respirometry test. The CO2 evolution and oxygen uptake of iron-free (DTPA was added as free acid) and Fe(III)DTPA were less than in inoculum blank. Possible inhibitor effect was analysed by testing biodegradation of sodium benzoate with and without iron-free or Fe(III)DTPA in the Manometric respirometry test. Only slight inhibition was observed when DTPA was added as free acid. Photodegradation of iron-free DTPA and Fe(III)-DTPA complex was studied by using sunlight and UV radiation at the range 315-400 nm emitted by black light lamps. The results indicate that DTPA added as free acid degrades photochemically in humic lake water. Fe(III)DTPA was shown to be very photolabile in humic lake water in the summer; the photochemical half-life was below one hour. Photodegradation products were identified by the mass spectrometric technique (GC-MS). It was shown that photodegradation of Fe(III)DTPA does not result in total mineralization of the compound. Diethylenetriaminetetraacetic acid, diethylenetriaminetriacetic acid, ethylenediaminetriacetic acid, N,N'- and/or N,N-ethylenediaminediacetic acid, iminodiacetate, ethylenediaminemonoacetic acid and glycine were identified as photodegradation products of Fe(III)DTPA. Based on these observations, we propose a photodegradation pathway for Fe(III)DTPA.     

Ecotoxicity of biocomposites based on renewable feedstock - preliminary studies

The aim of the work was to study the biodegradation process of biocomposites prepared from renewable resources and the ecotoxicological assessment of their biodegradation products. Biocomposites from modified starch reinforced with various cellulose fibers were prepared by the extrusion process. Biodegradation studies were carried out according to the ISO respirometic method. Ecotoxicity of biodegradation products was assessed by the luminescent bacteria test. It was found that biodegradation of biocomposites was above 60% within 24 days according to the results of respirometric test. Increase in the amount of natural fiber reinforcement, as well as smaller fiber size increased the biodegradability of biocomposites. On the basis of the preliminary results of the ecotoxicological test using luminescent bacteria it seems that the biodegradation products of the biocomposites studied are ecologically safe.     

Toxic effect of surfactants and probable products of their biodegradation on methanogenesis in an anaerobic microbial community.

Surfactants used in household and various industries, are rather toxic; therefore, the accumulation of these compounds in the environment through wastewaters has challenged the problem of their biodegradation. In this research, an attempt was made to assess the toxic effect of various surfactants and the likely products of their biodegradation on the acetoclastic methanogens of an anaerobic microbial community. Among the substances investigated, cationic surfactants were found to be most toxic to methanogens: 154 mg/l alkamon DS and 345 mg/l catamin AB induced a 50% inhibition of methanogenesis. Toxicity studies of some aromatic and cyclic compounds, as the probable products of biodegradation of alkylbenzene sulfonate surfactants, showed that methanogenesis in the microbial community under study are rather tolerant to high concentrations of these compounds.