Biosolids-derived nitrogen mineralization and transformation in forest soils

Utilization of biosolids through land application is becoming increasingly popular among wastewater managers. To minimize the potential contamination of receiving waters from biosolids-derived nitrogen (N), it is important to understand the availability of N after land application of biosolids. In this study, four secondary biosolids (two municipal and two pulp and paper industrial biosolids) were used in a laboratory incubation experiment to simulate N mineralization and transformation after land application. Municipal biosolids were from either aerobically or anaerobically digested sources, while pulp and paper industrial biosolids were from aerated wastewater stabilization lagoons. These biosolids were mixed with two New Zealand forest soils (top 100 mm of a volcanic soil and a brown soil) and incubated at two temperatures (10 and 20 degrees C) for 26 wk. During incubation, mineralized N was periodically leached from the soil-biosolids mixture with 0.01 M CaCl2 solution and concentrations of NH4 and NO3 in leachate were determined. Mineralization of N from aerobically digested municipal biosolids (32.1%) was significantly more than that from anaerobically digested biosolids (15.2%). Among the two pulp and paper industrial biosolids, little N leached from one, while as much as 18.0% of total organic N was leached from the other. As expected, mineralization of N was significantly greater at 20 degrees C (average 22.8%) than at 10 degrees C (average 9.7%). It was observed that more N in municipal biosolids was mineralized in the brown soil, whereas more N in pulp and paper industrial biosolids mineralized in the volcanic soil. Transformation of NH4 to NO3 was affected by soil type and temperature.     

Reclamation of acid sulfate soils using lime-stabilized biosolids

Excavation of sulfidic materials during construction has resulted in acid rock drainage (ARD) problems throughout Virginia. The most extensive documented uncontrolled disturbance at a single location is Stafford Regional Airport (SRAP) in Stafford, Virginia. Beginning in 1998, over 150 ha of sulfidic Coastal Plain sediments were disturbed, including steeply sloping cut surfaces and spoils placed into fills. Acid sulfate soils developed, and ARD generated on-site degraded metal and concrete structures and heavily damaged water quality with effects noted over 1 km downstream. The site was not recognized as sulfidic until 2001 when surface soil sampling revealed pH values ranging from 1.9 to 5.3 and peroxide potential acidity (PPA) values ranging from 1 to 42 Mg CaCO(3) per 1000 Mg material. In February 2002 a water quality program was established in and around the site to monitor baseline pH, EC, NO(3)-N, NH(4)-N, PO(4)-P, Fe, Al, Mn, and SO(4)-S, and initial pH values as low as 2.9 were noted in on-site receiving streams. In the spring and fall of 2002, the site was treated with variable rates of lime-stabilized biosolids, straw-mulch, and acid- and salt-tolerant legumes and grasses. By October 2002, the site was fully revegetated (> or = 90% living cover) with the exception of a few highly acidic outcrops and seepage areas. Surface soil sampling in 2003, 2004, and 2006 revealed pH values typically > 6.0. Water quality responded quickly to treatment, although short-term NH(4)(+) release occurred. Despite heavy loadings, no significant surface water P losses were observed.     

Degradation of methyl isothiocyanate and chloropicrin in forest nursery soils

Recent studies have observed enhanced degradation of methyl isothiocyanate (MITC) from repeated fumigation in agricultural soils. Little is known about fumigant degradation in forest and nursery soils. This study was conducted to determine degradation rates of MITC and chloropicrin (CP) in two forest soils and the impacts of nursery management on degradation of MITC and CP. The half-life values of MITC and CP were evaluated in the laboratory under isothermal conditions (22 +/- 2 degrees C). Three rates representing 0.5x, 1x, and 2x field application rates for each fumigant were used in laboratory incubations. Effect of microbial degradation was determined by conducting incubations with both fresh and sterilized soils. Soil moisture effects were also studied. There was no difference in MITC or CP degradation between fumigated and nonfumigated forest nursery soils. Soil sterilization and high soil moisture content (15% by wt.) reduced MITC and CP degradation. The degradation rates of MITC and CP varied with factors such as nursery history, fumigant application rates, and freshness of tested soils.     

Valorization of sodium sulfate waste to potassium sulfate fertilizer: experimental studies,process modeling,and optimization

ABSTRACT

Sodium sulfate is a common low-value industrial by-product but can be managed using the Glaserite process to convert it into high-value potassium sulfate. The aim of the study is to investigate the potential for implementing this process in an industrial application. Experimental studies were completed to determine the yield and purity of both glaserite and potassium sulfate. Process simulation using SysCAD was utilized to optimize a two-stage glaserite process to produce potassium sulfate. Comparison of experimental and simulated data was made to validate the simulator’s results, finding the AAD in solid and liquid phase for glaserite production to be 6.9% and 5.7%, respectively, and for potassium sulfate to be 5.7% and 2.3%, respectively. For a process treating seven MT/hr of Na₂SO₄, a KCl feed strategy of 3.0 MT/hr to the glaserite reactor and 4.5 MT/hr to the K₂SO₄ reactor was found to maximize yield and minimize water demand. It was also found that ambient temperatures were preferred for the K₂SO₄ reactor and that K₂SO₄ yield suffered significantly under certain conditions when the glaserite reactor operated at 50°C or above.     

Nitrogen mineralization and microbial activity in oil sands reclaimed boreal forest soils

Organic materials including a peat-mineral mix (PM), a forest floor-mineral mix (L/S), and a combination of the two (L/PM) were used to cap mineral soil materials at surface mine reclamation sites in the Athabasca oil sands region of northeastern Alberta, Canada. The objective of this study was to test whether LFH provided an advantage over peat by stimulating microbial activity and providing more available nitrogen for plant growth. Net nitrification, ammonification, and N mineralization rates were estimated from field incubations using buried bags. In situ gross nitrification and ammonification rates were determined using the 15N isotope pool dilution technique, and microbial biomass C (MBC) and N (MBN) were measured by the chloroform fumigation-extraction method. All reclaimed sites had lower MBC and MBN, and lower net ammonification and net mineralization rates than a natural forest site (NLFH) used as a control, but the reclamation treatment using LFH material by itself had higher gross and net nitrification rates. A positive correlation between in situ moisture content, dissolved organic N, MBC, and MBN was observed, which led us to conduct a moisture manipulation experiment in the laboratory. With the exception of the MBN for the L/S treatment, none of the reclamation treatments ever reached the levels of the natural site during this experiment. However, materials from reclamation treatments that incorporated LFH showed higher respiration rates, MBC, and MBN than the PM treatment, indicating that the addition of LFH as an organic amendment may stimulate microbial activity as compared to the use of peat alone.     

A regional-scale study on the crop uptake of cadmium from sandy soils: measurement and modeling

Plant uptake is one of the major pathways by which cadmium (Cd) in soils enters the human food chain. This study was conducted to investigate the uptake of Cd by crops from soils within the wastewater irrigation area (WIA) of Braunschweig (Germany) and to develop a simple process-oriented model that is suited to predict Cd uptake at the regional scale. The sandy soils within the WIA (4300 ha) have received considerable loads of heavy metals by irrigation using municipal wastewater for up to 40 years. In 1998 and 1999, we sampled soil and plant material at 40 potato (Solanum tuberosum L.), 40 sugar beet (Beta vulgaris L.), and 32 winter wheat (Triticum aestivum L.) fields. In both years and for all three crops, we found close linear relationships between the Cd content of plant material and the Cd concentration in soil solution. For all three crops, we observed a trend of relatively increased Cd uptake in the year with the higher saturation deficit of the atmosphere. We interpret this to indicate that transpiration plays an important role in the Cd uptake of crops under the conditions of the WIA. In modeling the uptake of Cd by crops, we assume that uptake is proportional to mass flow, that is, the product of water transpired, Cd concentration in soil solution, and a plant-specific empirical parameter. The simulations agreed well with the observed Cd contents in crops. Our model explained between 66 and 87% of the observed variance.     

Solute transport modeling under cultivated sandy soils and transient water regime

Drainable lysimeters offer the possibility to integrate heterogeneous solute leaching conditions caused by row crops and transient water regime, and to conveniently measure water and solute fluxes at the drainage outlet. To compare solute leaching behavior in and around drainable lysimeters operating under a transient water regime in potato (Solanum tuberosum L.) fields, parameters of the convective lognormal transfer (CLT) function model were fitted using bromide (Br-) flux concentrations (Cf) measured in lysimeters and from Br- resident concentrations (Cr) measured in adjacent soil cores. Expected mean values Ez(I) obtained from Cr and Cf CLT parameters were equivalent and well correlated (R2 = 0.78). However, estimated median values mu of the CLT function were smaller when derived from Cr (1.05 to 1.28) compared with Cf (1.23 to 2.14). Most mu values were also smaller than previously reported values for a 30-cm reference depth, indicating that 50% of solute mass would leach more readily in these coarse sandy soils. Higher variance and dispersion of Cr compared with those of Cf could be related to a smaller sampling support (sample size/sampling area) in the case of Cr measured by soil coring, or to disruption of solute transport mechanisms in the repacked lysimeter. Retained Br- in the top soil layer after 12 to 17 cm of cumulative drainage was indicated by measured Cr. Neither CLT function simulated well residual topsoil Cr values, indicating that Br- plant cycling or preferential flow probably interfered even though tuber Br- uptake was relatively small.     

Chemical properties of soils in relation to forest composition in moist temperate valley slopes of Garhwal Himalaya, India

The present study was undertaken in moist temperate forest of Mandal-Chopta area in the Garhwal region of Uttarakhand, India. The aim of the present study was to assess the chemical properties of soils in relation to the forest structure and composition. Twelve forest types according to the altitude, slope aspect, and species composition were selected for the study. Chemical properties of the soil, i.e., total nitrogen (N), available phosphorus (P), available potassium (K), organic carbon (C), soil organic matter (SOM), pH and C:N ratios were analyzed for three different depths viz., (i) ??Upper?? (0?C10?cm), (ii) ??Middle?? (11?C30?cm), and (iii) ??Lower?? (31?C60?cm) in all the selected forest types. Phytosociological and diversity parameters viz. total basal cover (Gha^?1), stem density (Nha^?1), tree species richness (SR), Simpson concentration of dominance and Shannon?CWiener diversity index ( $ \overline{\rm H} $ ) were also calculated for each forest type. Values of N, P, K, C, SOM, C:N ratio and pH ranged from 0.17 to 0.45?%, 2.73 to 20.17?ppm, 40.67 to 261.17?ppm, 2.29 to 4.31?%, 3.95 to 7.43?%, 8.12 to 14.49 and 5.47 to 6.67, respectively. N showed a positive relationship with C and K. P was positively correlated with C and negatively correlated with altitude. P was higher in the soil of lower horizons of all the forest types. K was found to be positively correlated with altitude, C and N. pH of all the forest types was slightly acidic. C was comparatively higher in mixed broad-leaved forest types. No relationship between altitude and C was observed, which may be due to different composition of forest types along the altitudinal gradient and their differential decomposition rates. C content decreased with the depth of the soil. C showed positive correlation with N, P, and K. N showed a positive correlation with Gha^?1. K showed a negative correlation with SR and $ \overline{\rm H} $ . P showed no relationship with the phytosociological parameters. This study also provides the comparisons between the results of chemical analysis of the present study with numerous other previous studies in the temperate Himalayan region of the Uttarakhand. The values of soil chemical properties of the present study in most of the forest types are on the higher end than the values previously recorded for the other similar forests of the region. The possible reason being luxuriant vegetation and undisturbed nature of these forest types, which is evident from higher values of diversity and other phytosociological parameters.     

Estimating and valuing the carbon sequestered in softwood and hardwood trees, timber products and forest soils in Wales

Models of carbon storage in softwood and hardwood trees and forest soils and its emission from timber products and waste are developed and integrated with data on storage benefits to yield estimates of the value of the net carbon flux generated by afforestation. The long-term nature of the processes under consideration and the impact of varying the discount rate are explicitly incorporated within the model. A geographical information system (GIS) is used to apply carbon sequestration models to data on tree growth and soil type distribution for a large study area (the entire country of Wales). The major findings are: (1) all three elements under analysis (carbon sequestration in livewood, release from different products and waste, and storage or emission from soils) play a vital role in determining overall carbon flux; (2) woodland management has a substantial impact upon carbon storage in livewood however the choice of discount rate exerts the largest overall influence upon estimated carbon flux values; (3) timber growth rates (yield class) also have a major impact upon values; (4) tree species does affect storage values, however this is less important than the other factors listed above; (5) non-peat soils generally sequester relatively low levels of carbon. Planting upon peat soils can result in very substantial emissions of carbon which exceed the level of storage in livewood.The GIS is used to produce valuation maps which can be readily incorporated within cost-benefit analyses regarding optimal locations for conversion of land into forestry.     

Leaching of dissolved organic carbon and carbon dioxide emission after compost application to six nutrient-depleted forest soils

The objective of this study was to assess the effect of compost application on soil respiration and dissolved organic carbon (DOC) output of nutrient-depleted forest soils. An amount of 6.3 kg m(-2) mature compost was applied to the forest floor of European beech (Fagus sylvatica L.), Norway spruce (Picea abies Karst.), and Scots pine (Pinus sylvestris L.) stands at Soiling and Unterlüss, Germany. Cumulative soil respiration significantly increased by 499 g C m(-2) in the spruce stand at Unterlüss and by 274 g C m(-2) in the beech stand at Soiling following compost application whereas soil respiration of the other four stands was not affected. The increases in soil respiration of the two stands were explained by improved microbial decomposition of soil organic matter. The DOC concentrations and fluxes in throughfall and seepage water at 10- and 100-cm depths were determined from August 1997 to March 2000. In the control plots, cumulative DOC outputs at 10 cm ranged between 57 and 95 g C m(-2), with the highest rates in the pine stands. Compost treatment significantly increased cumulative DOC outputs by 31 to 69 g C m(-2) at 10 cm and by 0.3 to 6.6 g C m(-2) at 100 cm. The mineral soils between the 10- and 100-cm depths acted as significant sinks for DOC, as shown by much lower cumulative outputs at 100 cm of 3 to 11 g C m(-2) in the control and 6 to 16 g C m(-2) in the compost plots. Our results suggest that a single, moderate application of mature compost to nutrient-depleted forest soils has little effect on C losses to the atmosphere and ground water.     

Study of Fractionation and Potential Mobility of Metal from the Guadalquivir Estuary: Changes in Mobility with Time and Influence of the Aznalcollar Mining Spill

This study analyzed the evolution of metal levels in surface sediments from the Guadalquivir estuary between 1997 and 2002 and assessed the impact of the April 1998 Aznalcollar tailings dam failure and subsequent cleanup on metal concentrations in surface sediments. We also analyzed metal distribution with time in five chemical fractions of the surface sediments: exchangable, carbonate, reducible, oxidizable, and residual. This work showed that the April 1998 Aznalcollar tailings dam failure caused a considerable increase in the concentrations of Cd, Zn, Cu, and Pb in the surface sediments of the Guadalquivir estuary. It was also found there was a change in the distribution of Cd, Zn, Cu, and Pb between the chemical fractions of the sediment after the failure of the dam. There were increases in the percentages of Cd in the carbonate fraction, of Zn and Pb in the reducible fraction, and of Cu in the oxidizable fraction, whereas the percentages of these elements associated with the residual fraction decreased. In 1999, there was a decrease in the metal concentrations in the surface sediments from the Guadalquivir estuary, and by 2000 the chemical distribution and metal levels had returned to levels similar those before the dam failure.     

Phosphorus cycling in wetland soils: the importance of phosphate diesters

Productivity in P limited peatlands is regulated in part by the turnover of organic phosphates, which is influenced by the chemical nature of the compounds involved. We used solution 31P nuclear magnetic resonance (NMR) spectroscopy to quantify organic and inorganic phosphates in benthic floc (a mixture of plant detritus and algae) and underlying soil from sites along P gradients in hard water and soft water areas of the northern Florida Everglades, USA. Phosphorus-enriched sites were dominated by cattail (Typha spp.), while unenriched sites included sawgrass (Cladium jamaicense Crantz) ridges and open-water sloughs. Phosphorus extracted in a solution containing 0.25 M NaOH and 50 mM EDTA (ethylenediaminetetraacetate) included phosphate, phosphate monoesters, DNA, and pyrophosphate. Signals from phosphate monoesters were consistent with those from alkaline hydrolysis products of RNA and phospholipids formed during extraction and analysis, whereas phytic acid (myo-inositol hexakisphosphate), the most abundant organic phosphate in most soils, was not detected. Phosphorus composition was similar among sites, although neither DNA nor pyrophosphate were detected in extracts of benthic floc from a calcareous slough. DNA was a greater proportion of the P extracted from soil compared to benthic floc, while the opposite was true for pyrophosphate. Research on the cycling of organic phosphates in wetlands focuses conventionally on the turnover of phosphate monoesters, but our results suggest strongly that greater emphasis should be given to understanding the role of phosphate diesters and phosphodiesterase activity.     

Mobility of acid-treated carbon nanotubes in water-saturated porous media

The production, use, and disposal of nanomaterials may inevitably lead to their appearance in water. With the development of new industries around nanomaterials, it seems necessary to be concerned about the transport of nanomaterials in the environment. In this paper, the transport of acid-treated carbon nanotubes (CNTs) in porous media was investigated. Before the mobility investigation, the stability of acid-treated CNT dispersions was studied using ultraviolet-visible spectra and it was indicated that, under the chemical conditions employed in this work, there was no apparent aggregation. The mobility investigation showed that transport of acid-treated CNTs increased with treatment time due to increase in particle zeta potential. Carbon nanotubes treated with nitric acid for 2, 6, and 12 h possessed measured zeta potentials of -30.0, -43.0, and -48.5 mV, respectively. Utilizing clean-bed filtration theory, we showed that acid-treated CNTs have the potential to migrate 3.28, 5.67, and 7.69 m in saturated glass beads, respectively. We showed that solution ionic strength and pH have important effects on the mobility of acid-treated CNTs. Increasing the pH from 6.0 to 7.9 resulted in an increase in migration potential from 2.96 to 10.86 m. Increasing the ionic strength from 0.005 to 0.020 M resulted in a decrease in CNT migration potential from 5.67 to 1.42 m.     

Monitoring of nitrate leaching in sandy soils: comparison of three methods

Proper N fertilizer and irrigation management can reduce nitrate leaching while maintaining crop yield, which is critical to enhance the sustainability of vegetable production on soils with poor water and nutrient-holding capacities. This study evaluated different methods to measure nitrate leaching in mulched drip-irrigated zucchini, pepper, and tomato production systems. Fertigation rates were 145 and 217 kg N ha(-1) for zucchini; 192 and 288 kg N ha(-1) for pepper; and 208 and 312 kg N ha(-1) for tomato. Irrigation was either applied at a fixed daily rate or based on threshold values of soil moisture sensors placed in production beds. Ceramic suction cup lysimeters, subsurface drainage lysimeters and soil cores were used to access the interactive effects of N rate and irrigation management on N leaching. Irrigation treatments and N rate interaction effects on N leaching were significant for all crops. Applying N rates in excess of standard recommendations increased N leaching by 64, 59, and 32%, respectively, for pepper, tomato, and zucchini crops. Independent of the irrigation treatment or nitrogen rate, N leaching values measured from the ceramic cup lysimeter-based N leaching values were lower than the values from the drainage lysimeter and soil coring methods. However, overall nitrate concentration patterns were similar for all methods when the nitrate concentration and leached volume were relatively low.     

Monitoring forest biodiversity: a European perspective with reference to temperate and boreal forest zone

Recent state of forest biodiversity at the European level was reviewed and analysed with respect to the current requirements from the environmental policies as well as with respect to scientific findings in the field. The analysis reveals the main deficits and development needs, and outlines some possible courses for future action. Specific reference is given to the boreal, Atlantic and continental regions of Europe.Especially the operational definition of biodiversity, the selection of the scale and consideration of the most appropriate indicators and data collection methods are of primary importance when defining a monitoring approach. The results of a recent assessment at national scale contribute to an improved understanding, but show some shortcomings with respect to the level of detail. The high variability of the distribution, structure and composition of forests in Europe can be comprised only partially when the monitoring follows national borders. To detect changes in time for corrective measures and to be able to apply appropriate threshold values for biodiversity indicators a more detailed approach, which takes into account different bio-geographical regions and forest ecosystem types, is needed. Technically, this could be based on aggregation national forest inventories or European-wide sampling scheme combined with remote sensing data and distinct forest types or categories.     

Cadmium in aquatic ecosystems in Western Australia: A legacy of nutrient-deficient soils

More than 273 tonnes of cadmium have been added to Western Australian ecosystems through the application of superphosphate fertilisers since 1982. Fifty percent of this is water soluble and therefore eventually leaches into waterbodies and accumulates in the sediments. From this source, it enters the food web through algae and benthic animals and may ultimately be passed to humans. This is reflected in the cadmium levels of the freshwater mussels (Westralunio carteri) that exceeded statutory Australia New Zealand Food Authority (ANZFA) guidelines for Maximum Permissible Concentrations (MPCs) with respect to human consumption. The cadmium levels bioaccumulated in freshwater mussels elevated with increasing catchment clearing, being highest in degraded catchments. The MPC for Cd in crustaceans have recently been removed, yet tissues within the freshwater crayfish (Cherax tenuimanus) frequently exceeded the old MPC (0·2 μCd g⁻¹wet weight). Marron are sometimes consumed in considerable quantities and the risk to human health posed by a high Cd intake is briefly summarised. Finally, a number of management options concerned with reducing the level of Cd from fertilisers passing to humans are reviewed.     

Denitrification in suburban lawn soils

There is great uncertainty about the fate of nitrogen (N) added to urban and suburban lawns. We used direct flux and in situ chamber methods to measure N and NO fluxes from lawns instrumented with soil O sensors. We hypothesized that soil O, moisture, and available NO were the most important controls on denitrification and that N and NO fluxes would be high following fertilizer addition and precipitation events. While our results support these hypotheses, the thresholds of soil O, moisture, and NO availability required to see significant N fluxes were greater than expected. Denitrification rates were high in saturated, fertilized soils, but low under all other conditions. Annual denitrification was calculated to be 14.0 ± 3.6 kg N ha yr, with 5% of the growing season accounting for >80% of the annual activity. Denitrification is thus an important means of removing reactive N in residential landscapes, but varies markedly in space, time, and with factors that affect soil saturation (texture, structure, compaction) and NO availability (fertilization). Rates of in situ NO flux were low; however, when recently fertilized soils saturated with water were incubated in the laboratory, we saw extraordinarily high rates of NO production for the first few hours of incubation, followed by rapid NO consumption later in the experiment. These findings indicate a lag time between accelerated NO production and counterbalancing increases in NO consumption; thus, we cannot yet conclude that lawns are an insignificant source of NO in our study area.