Interpreting the relationship between pheromone component emission from commercial lures and captures of Helicoverpa zea (boddie) in bucket and cone traps

Abstract

Male corn earworm moths, Helicoverpa zea (Boddie), were captured in conical Texas pheromone traps (cone traps) and bucket traps baited with four different commercial lures manufactured by three different manufacturers. Because significant numbers were captured in bucket traps baited with some of the lures, and none with others, the volatile emissions from all of the lures were sampled and analyzed by gas Chromatographic methods. The numbers of males captured in two types of trap were compared with bait emissions in an endeavor to define a more effective lure for bucket traps. The lure from one manufacturer captured the same numbers of males in both trap types; one captured more in bucket traps than in cone traps, and another captured only a small number in bucket traps. The emission rate of all active compounds from each of the different lures was approximately linear for the duration of the assays. A gas‐liquid Chromatographic peak associated with a third compound, (Z)‐9‐tetradecenal, which reduces behavioral responses, was observed in the emissions from all lures evaluated. The effectiveness of the Hercon (Emmigsville, PA) lure in capturing males in both types of trap was associated with a lower emission of (Z)‐l 1‐hexadecenal, (Z)‐9‐hexadecenal and (Z)‐9‐tetradecenal than from the other lures.     

Comparison of microwave assisted extraction with conventional (homogenization, vortexing) for the determination of incurred salinomycin in chicken eggs and tissues

Incurred and fortified salinomycin residues were extracted from chicken tissues and eggs by homogenization, vortexing and by microwave assisted extraction. The salinomycin residues were quantitated by liquid chromatography following postcolumn derivatization with either vanillin or 4-dimcthylamino-benzaldehyde and detected at 520 or 592 nm, respectively. Comparison of residue data indicated that microwave assisted extraction performed as well as the vortexing technique in extracting salinomycin residues in the tissues of laying chickens that were fed meal containing drugs at various level. In the present study, extracts from homogenizing could not be analyzed directly without clean up. Therefore, microwave assisted extraction appears to be a reliable, reproducible, and economical substitute for routinely used homogenization and vortexing extraction techniques.     

Comparison of Microwave Assisted Extraction with Conventional (Homogenization,Vortexing) for the Determination of Incurred Salinomycin in Chicken Eggs and Tissues

Abstract

Incurred and fortified salinomycin residues were extracted from chicken tissues and eggs by homogenization, vortexing and by microwave assisted extraction. The salinomycin residues were quantitated by liquid chromatography following postcolumn derivatization with either vanillin or 4-dimethylamino-benzaldehyde and detected at 520 or 592 nm, respectively. Comparison of residue data indicated that microwave assisted extraction performed as well as the vortexing technique in extracting salinomycin residues in the tissues of laying chickens that were fed meal containing drugs at various level. In the present study, extracts from homogenizing could not be analyzed directly without clean up. Therefore, microwave assisted extraction appears to be a reliable, reproducible, and economical substitute for routinely used homogenization and vortexing extraction techniques.     

Multiresidue analysis of organophosphate and pyrethroid pesticides in duplicate-diet solid food by pressurized liquid extraction

An analytical method was developed for determining organophosphate pesticides (OPP) and pyrethroid pesticides (PYR) in duplicate-diet solid food. The method consisted of pressurized liquid extraction (PLE) with dichloromethane followed by cleanup with gel permeation and solid phase extraction columns and gas chromatography/mass spectrometry (GC/MS) analysis. Quantitative recoveries (73-117 %) of the target pesticides were obtained for spiked duplicate-diet food samples. The percent standard deviation (% RSD) of replicate food samples was within ± 20 %. Another method was developed for determining a common OPP metabolite, 3, 5, 6-trichloro-2-pyridinol (TCP) in duplicate-diet food. The method consisted of a PLE with methanol followed by liquid-liquid partitioning, derivatization, and GC/MS analysis. Recoveries of TCP ranged from 83 to 101 % for spiked duplicate-diet food samples. The % RSD of replicate food samples was within ± 15 %. The results confirmed that these methods are reliable and robust, and that they can be used in routine analysis. In addition, a storage stability study for a common OPP, chlorpyrifos (CPF), in solid food samples was performed. The fortified (15)N-(13)C-labeled CPF was stable over 16 mo storage at -20° C in the dark. The developed analytical methods were successfully applied to 278 duplicate-diet food samples from preschool children, demonstrating that these methods are robust and suitable for routine analysis in future exposure monitoring studies.     

An intercomparison of formaldehyde measurement techniques at ambient concentration

A study was conducted to evaluate five techniques for determining ambient formaldehyde concentrations. One technique used a spectroscopic determination, and the other four techniques used derivatization followed by fluorometric analysis or high-performance liquid chromatography with detection by u.v. absorption. Formaldehyde was generated by two techniques. In the first technique, zero air was bubbled through a solution of aqueous formaldehyde to produce gas-phase formaldehyde. Various compounds serving as possible interferences were added singly or in combination to these air mixtures. In the second technique, formaldehyde was generated as a product from controlled irradiations of hydrocarbons and nitrogen oxides in a smog chamber operated in a dynamic mode. The study was conducted as a blind intercomparison with no knowledge by the participants of the HCHO concentrations or the interferences added.The data from each of the techniques were compared against mean values in each sampling period. For formaldehyde in zero air, average deviations for each of the techniques ranged between 15 and 30%. At a formaldehyde concentration of 10 ppb, each technique showed no evidence for interferences by O₃ (190 ppbv), NO₂ (300 ppbv), SO₂ (20 ppbv), and H₂O₂ (7 ppbv). The agreement for formaldehyde concentrations measured for the photochemical mixtures was similar to that of the mixtures in zero air.Ambient measurements were also performed on three evenings and for one 36-h period. Ambient formaldehyde concentrations ranged from 1 to 10 ppbv. Ambient H₂O₂ measurements were also performed. A strong correlation in the diurnal concentration profile for formaldehyde and H₂O₂ was observed over the 36-h period.     

Multiresidue analysis of organophosphate and pyrethroid pesticides in duplicate-diet solid food by pressurized liquid extraction

An analytical method was developed for determining organophosphate pesticides (OPP) and pyrethroid pesticides (PYR) in duplicate-diet solid food. The method consisted of pressurized liquid extraction (PLE) with dichloromethane followed by cleanup with gel permeation and solid phase extraction columns and gas chromatography/mass spectrometry (GC/MS) analysis. Quantitative recoveries (73–117 %) of the target pesticides were obtained for spiked duplicate-diet food samples. The percent standard deviation (% RSD) of replicate food samples was within ± 20 %. Another method was developed for determining a common OPP metabolite, 3, 5, 6-trichloro-2-pyridinol (TCP) in duplicate-diet food. The method consisted of a PLE with methanol followed by liquid-liquid partitioning, derivatization, and GC/MS analysis. Recoveries of TCP ranged from 83 to 101 % for spiked duplicate-diet food samples. The % RSD of replicate food samples was within ± 15 %. The results confirmed that these methods are reliable and robust, and that they can be used in routine analysis. In addition, a storage stability study for a common OPP, chlorpyrifos (CPF), in solid food samples was performed. The fortified ¹⁵N-¹³C-labeled CPF was stable over 16 mo storage at ?20° C in the dark. The developed analytical methods were successfully applied to 278 duplicate-diet food samples from preschool children, demonstrating that these methods are robust and suitable for routine analysis in future exposure monitoring studies.     

Interpreting the relationship between pheromone component emission from commercial lures and captures of Helicoverpa zea (Boddie) in bucket and cone traps

Male corn earworm moths, Helicoverpa zea (Boddie), were captured in conical Texas pheromone traps (cone traps) and bucket traps baited with four different commercial lures manufactured by three different manufacturers. Because significant numbers were captured in bucket traps baited with some of the lures, and none with others, the volatile emissions from all of the lures were sampled and analyzed by gas chromatographic methods. The numbers of males captured in two types of trap were compared with bait emissions in an endeavor to define a more effective lure for bucket traps. The lure from one manufacturer captured the same numbers of males in both trap types; one captured more in bucket traps than in cone traps, and another captured only a small number in bucket traps. The emission rate of all active compounds from each of the different lures was approximately linear for the duration of the assays. A gas-liquid chromatographic peak associated with a third compound, (Z)-9-tetradecenal, which reduces behavioral responses, was observed in the emissions from all lures evaluated. The effectiveness of the Hercon (Emmigsville, PA) lure in capturing males in both types of trap was associated with a lower emission of (Z)-11-hexadecenal, (Z)-9-hexadecenal and (Z)-9-tetradecenal than from the other lures.     

Determination of polar pharmaceuticals in sewage water of Greece by gas chromatography-mass spectrometry

Sewage influents and effluents of different urban areas of Greece, were analyzed for polar pharmaceutical residues, used in human medicine. Drugs investigated were the anti-inflammatory drugs diclofenac and ibuprofen, the metabolite of the drugs clofibrates used as blood lipid regulators, clofibric acid and the analgesics phenazone and propyphenazone. Analysis was carried out using capillary gas chromatography-mass spectrometry with selected ion monitoring. The method used was involved solid phase extraction (C(18)) and derivatization with pentafluorobenzyl bromide. Diclofenac was detected in every sewage effluent sample.     

Analysis of nitrated polynuclear aromatic hydrocarbons

A derivatization-gas chromatography/electron capture detector (GC/ECD) method has been developed for the measurement of trace nitrated polynuclear aromatic hydrocarbons (NPAHs) in air. The method involves first the derivatization of parent nitro-PAHs to their corresponding fluorinated derivatives, followed by GC/ECD analysis. The sensitivity of the method is an order of magnitude higher than those of direct GC/ECD analysis of NPAHs themselves. The method is simple and robust and thus ideally suited for the routine monitoring of NPAHs in air samples. The sensitivity and reproducibility of GC/negative ion chemical ionization MS (NICIMS) for the measurement of NPAHs after derivatization has been evaluated. The method has sensitivity comparable to GC/ECD, but is less reproducible in quantification. The method is therefore suitable for method validation and NPAHs peak confirmation rather than routine operations.     

Method development for determination of fluroxypyr in soil

Four methods were developed for the analysis of fluroxypyr in soil samples from oil palm plantations. The first method involved the extraction of the herbicide with 0.05 M NaOH in methanol followed by purification using acid base partition. The concentrated material was subjected to derivatization and then cleaning process using a florisil column and finally analyzed by gas chromatography (GC) equipped with electron capture detector (ECD). By this method, the recovery of fluroxypyr from the spiked soil ranged from 70 to 104% with the minimum detection limit at 5 microg/kg. The second method involved solid liquid extraction of fluroxypyr using a horizontal shaker followed by quantification using high performance liquid chromatography (HPLC) equipped with UV detector. The recovery of fluroxypyr using this method, ranged from 80 to 120% when the soil was spiked with fluroxypyr at 0.1-0.2 microg/g soil. In the third method, the recovery of fluroxypyr was determined by solid liquid extraction using an ultrasonic bath. The recovery of fluroxypyr at spiking levels of 4-50 microg/L ranged from 88 to 98% with relative standard deviations of 3.0-5.8% with a minimum detection limit of 4 microg/kg. In the fourth method, fluroxypyr was extracted using the solid liquid extraction method followed by the cleaning up step with OASIS HLB (polyvinyl dibenzene). The recovery of fluroxypyr was between 91 and 95% with relative standard deviations of 4.2-6.2%, respectively. The limit of detection in method 4 was further improved to 1 pg/kg. When the weight of soil used was increased 4 fold, the recovery of fluroxypyr at spiking level of 1-50 microg/kg ranged from 82-107% with relative standard deviations of 0.5-4.7%.     

Toxaphene levels in salmon (Salmo salar) from the Baltic Sea

Three toxaphene congeners have been determined in salmon from the Swedish coastal environment using both supercritical fluid (SFE) and the traditional liquid/liquid extractions. The levels obtained using a modifier-free SFE technique, followed by group separation on a silica gel column, were by far much lower than concentrations obtained by SFE with a modifier or liquid/liquid extraction. The mean concentrations on fresh weight basis using a liquid/liquid extraction technique were 5.87, 8.70 and 1.59 microg/kg for CHBs 26, 50 and 62, respectively. There was a plausible relationship between the various fishing sites and the toxaphene levels.     

Sediment pollution and dynamic in the Mar Piccolo of Taranto (southern Italy): insights from bottom sediment traps and surficial sediments

Major and trace element, PAH, and PCB concentrations were measured in surface sediments and particles from sediment traps collected in the First and Second Basin of the Mar Piccolo (Gulf of Taranto) in two periods (June–July and August–September, 2013). The aim of the study was to evaluate pollution degree, sediment transport and particle redistribution dynamic within the area. Results confirm the higher contamination of sediments from the First Basin observed by previous researches, particularly for Cu, Hg, Pb, total PAHs, and total PCBs. Advective transport from the First to the Second Basin appears to be the leading transfer mechanism of particles and adsorbed contaminants, as evidenced by measured fluxes and statistical analyses of contaminant concentrations in surficial sediments and particles from sediment traps. Long-range selective transports of PAHs and microbial anaerobic degradation processes for PCBs have been also observed. These results are limited to a restricted time window but are consistent with the presence of transport fluxes at the bottom of the water column. This mechanism deserves further investigation and monitoring activities, potentially being the main responsible of pollutant delivering to the less contaminated sectors of the Mar Piccolo.     

Application of nano-FIA-Direct-EI-MS to determine diethylene glycol in produced formation water discharges and seawater samples

Diethylene glycol (DEG) is extensively used on offshore gas platforms to prevent the hydrate formation during the gas-water separation process and to inhibit corrosion events. This chemical might enter in the marine environment via the produced formation water (PFW) discharge. In this study, a new approach was applied to the investigation of the DEG content in PFW discharges and seawater samples from four gas installation platforms in the Adriatic Sea (Italy). The method includes an off-line solid-phase extraction/pre-concentration technique, followed by a nanoscale flow injection/direct-electron ionization (EI) mass spectrometric analysis. Direct-EI is a novel and miniaturized interface for directly coupling a liquid chromatograph with an electron ionization mass spectrometer. The capability to acquire EI spectra, and to operate in selected ion monitoring mode during actual sample analyses, allowed a precise quantification of DEG with a method limit of detection of 31microg/l. In addition, a careful evaluation of the matrix effect showed that, as opposed to electrospray ionization, the response of the Direct-EI interface was not affected by sample interferences.     

Method Development for Determination of Fluroxypyr in Soil

Abstract

Four methods were developed for the analysis of fluroxypyr in soil samples from oil palm plantations. The first method involved the extraction of the herbicide with 0.05 M NaOH in methanol followed by purification using acid base partition. The concentrated material was subjected to derivatization and then cleaning process using a florisil column and finally analyzed by gas chromatography (GC) equipped with electron capture detector (ECD). By this method, the recovery of fluroxypyr from the spiked soil ranged from 70 to 104% with the minimum detection limit at 5 µg/kg. The second method involved solid liquid extraction of fluroxypyr using a horizontal shaker followed by quantification using high performance liquid chromatography (HPLC) equipped with UV detector. The recovery of fluroxypyr using this method, ranged from 80 to 120% when the soil was spiked with fluroxypyr at 0.1–0.2 µg/g soil. In the third method, the recovery of fluroxypyr was determined by solid liquid extraction using an ultrasonic bath. The recovery of fluroxypyr at spiking levels of 4–50 µg/L ranged from 88 to 98% with relative standard deviations of 3.0–5.8% with a minimum detection limit of 4 µg/kg. In the fourth method, fluroxypyr was extracted using the solid liquid extraction method followed by the cleaning up step with OASIS® HLB (polyvinyl dibenzene). The recovery of fluroxypyr was between 91 and 95% with relative standard deviations of 4.2–6.2%, respectively. The limit of detection in method 4 was further improved to 1 µg/kg. When the weight of soil used was increased 4 fold, the recovery of fluroxypyr at spiking level of 1–50 µg/kg ranged from 82–107% with relative standard deviations of 0.5–4.7%.     

Measurements of atmospheric nitrous acid and nitric acid

A highly sensitive technique for the measurement of atmospheric HONO and HNO₃ is reported. The technique is based on aqueous scrubbing using two coil samplers, followed by conversion of HNO₃ to nitrite, derivatization of nitrite to a highly light-absorbing azo dye with sulfanilamide (SA) and N-(1-naphthyl) ethylenediamine (NED), and high performance liquid chromatography (HPLC) analysis. HNO₃ concentration was obtained by the difference of the two channels. Two scrubbing solutions were used for sampling the two species: a 1-mM phosphate buffer solution (pH 7) for the measurement of HONO and a 180 mM NH₄Cl/NH₃ buffer solution (pH 8.5) for the measurement of HONO+HNO₃. The scrubbing solution flow rate was 0.24 ml min⁻¹ and the gas sampling flow rate was 2 l min⁻¹. HNO₃ in the NH₄Cl/NH₃ buffer solution was quantitatively reduced to nitrite along an on-line 0.8-cm Cd reductor column. Nitrite in both channels was derivatized with 2 mM SA and 0.2 mM NED in 25 mM HCl. Quantitative derivatization was achieved within 5 min at 55°C. The azo dye derivative was then separated from the SA/NED reagent by reversed-phase HPLC and detected with a UV-vis detector at 540 nm. With an on-line SEP-PAK C-18 cartridge for the reagent purification, the method detection limit is estimated to be better than 1 pptv for HONO and about 20 pptv for HNO₃. The sample integration time was about 2 min and the sampling frequency is every 10 min. Data collected in downtown Albany and Whiteface Mountain, NY, are shown as examples of applications of this technique in both urban and remote clean environments.     

Promising new technology for managing diamondback moth (Lepidoptera: Plutellidae) in cabbage with pheromone

Experiments were conducted in plantings of cabbage in spring 1999 and 2000 to evaluate a novel, new matrix system for delivering sex pheromone to suppress sexual communication by diamondback moth, Plutella xylostella (L.). The liquid, viscous, slow-release formulation contained a combination of diamondback moth pheromone, a blend of Z-11-hexadecenyl acetate, 27%:Z-11-hexadecen-1-ol, 1%:Z-11-tetradecen-1-ol, 9%:Z-11-hexadecenal, 63%, and the insecticide permethrin (0.16% and 6% w/w of total formulated material, respectively). Field trapping experiments showed that the lure-toxicant combination was highly attractive to male moths for at least four weeks using as little as a 0.05 g droplet of formulated material per trap; and the permethrin insecticide had no apparent influence on response of moths to lure baited traps. Small field plots of cabbage were treated with the lure-toxicant-matrix combination using droplets of 0.44 and 0.05 g each applied to cabbage in a grid pattern at densities ranging from 990 to 4396 droplets/ha to evaluate the potential for disrupting sexual communication of diamondback moth. There was no significant difference in the level of suppression of sexual communication of diamondback moth, as measured by captures of males in pheromone-baited traps located in the treated plots, versus moths captured in untreated control plots, among the treatments regardless of droplet size (0.05 or 0.44 g) or number of droplets applied per ha. Plots treated with the smallest droplet size (0.05 g) and with the fewest number of droplets per ha (990) suppressed captures of male diamondback moths > 90% for up to 3 weeks post treatment. Although laboratory assays showed that the lure-toxicant combination was 100% effective at killing the diamondback moth, the mode of action in the field trials was not determined. The results indicate that the liquid, viscous, slow release formulation containing diamondback moth pheromone could be used to effectively suppress sexual communication of this pest in cabbage and other crucifers, although as many as three applications probably would be required for suppression over an entire growing season.     

Adaptation and validation of QuEChERS method for the analysis of trifluralin in wind-eroded soil

This study was carried out to develop and validate a reliable analytical procedure for trifluralin analysis in wind-eroded sediments. Soil sediments trapped in BEST sediment traps were subjected to QuEChERS extraction method, incorporating a simple simultaneous cleanup step, followed by trifluralin analysis with GC-ECD. Results revealed that QuEChERS method offered a potential alternative technique for pesticide extraction from soil samples. The validity of analytical method was performed by the method-performance criteria such as, recovery, LOD, LOQ repeatability, precision, and all found to be within the required limits. It was also observed in this study that herbicide concentrations in the wind-eroded sediment did not vary with the time and trap height. Trifluralin concentrations of surface soil after four erosion events were higher (626.05 μg/kg) than wind-eroded soil (450.08 μg/kg).     

Occurrence of pharmaceutically active and non-steroidal estrogenic compounds in three different wastewater recycling schemes in Australia

The discovery that natural and synthetic chemicals, in the form of excreted hormones and pharmaceuticals, as well as a vast array of compounds with domestic and industrial applications, can enter the environment via wastewater treatment plants and cause a wide variety of environmental and health problems even at very low concentrations, suggests the need for improvement of water recycling. Three Australian wastewater recycling schemes, two of which employ reverse osmosis (RO) technology, the other applying ozonation and biological activated carbon filtration, have been studied for their ability to remove trace organic contaminants including 11 pharmaceutically active compounds and two non-steroidal estrogenic compounds. Contaminant concentrations were determined using a sensitive analytical method comprising solid phase extraction, derivatization and GC with MS using selected ion monitoring. In raw wastewater, concentrations of analgesics and non-steroidal anti-inflammatory medications were comparable to those found in wastewaters around the world. Remarkably, removal efficiencies for the three schemes were superior to literature values and RO was responsible for the greatest proportion of contaminant removal. The ability of RO membranes to concentrate many of the compounds was demonstrated and highlights the need for continued research into monitoring wastewater treatment, concentrate disposal, improved water recycling schemes and ultimately, safer water and a cleaner environment.     

New metallothionein assay in Scrobicularia plana: heating effect and correlation with other biomarkers

Metallothionein (MT) and other biomarker levels were measured in Scrobicularia plana clams to assess pollution of the Guadalquivir Estuary possibly affected by metals released from Aznalcóllar pyrite mine in 1998. After optimizing reagent concentrations for monobromobimane derivatization, MT levels were quantified by reversed-phase high-performance liquid chromatography coupled to fluorescence detection (RP-HPLC-FD) in heated or unheated digestive gland extracts and compared to those obtained by differential pulse polarography (DPP). MT content assayed by RP-HPLC-FD in unheated samples was higher than that obtained by DPP and correlated better with metals and anti-oxidant activities. MT assay by RP-HPLC-FD in unheated extracts would be preferable for assessing metal pollution, due to its greater sensitivity and specificity. In addition to MT induction, glyoxalase II inhibition was well correlated with metal contents. Our results suggest that metals at the estuary do not originate from Aznalcóllar spill, but from those carried along by the river and deposited at its concave bank.     

Combination of beehive matrices analysis and ant biodiversity to study heavy metal pollution impact in a post-mining area (Sardinia, Italy)

Mining activities represent a major source of environment contamination. The aim of this study was to evaluate the use of bees and ants as bioindicators to detect the heavy metal impact in post-mining areas. A biomonitoring programme involving a combination of honeybee hive matrices analysis and ant biodiversity survey was conducted over a 3-year period. The experimental design involved three monitoring stations where repeated sampling activities focused on chemical detection of cadmium (Cd), chrome (Cr) and lead (Pb) from different matrices, both from hosted beehives (foraging bees, honey and pollen) and from the surrounding environment (stream water and soil). At the same time, ant biodiversity (number and abundance of species) was determined through a monitoring programme based on the use of pitfall traps placed in different habitats inside each mining site. The heavy metal content detected in stream water from the control station was always below the analytical limit of quantification. In the case of soil, the content of Cd and Pb from the control was lower than that of mining sites. The mean heavy metal concentrations in beehive matrices from mining sites were mainly higher than the control, and as a result of regression and discriminant analysis, forager bee sampling was an efficient environmental pollution bioindicator. Ant collection and identification highlighted a wide species variety with differences among habitats mostly associated with vegetation features. A lower variability was observed in the polluted landfill characterised by lack of vegetation. Combined biomonitoring with forager bees and ants represents a reliable tool for heavy metal environmental impact studies.