Continued progress in the prevention of nail gun injuries among apprentice carpenters: What will it take to see wider spread injury reductions?

Problem

Nail guns are a common source of acute, and potentially serious, injury in residential construction.

Method

Data on nail gun injuries, hours worked and hours of tool use were collected in 2008 from union apprentice carpenters (n = 464) through classroom surveys; this completed four years of serial cross-sectional data collection from apprentices. A predictive model of injury risk was constructed using Poisson regression.

Results

Injury rates declined 55% from baseline measures in 2005 with early training and increased use of tools with sequential actuation. Injury rates declined among users of tools with both actuation systems, but the rates of injury were consistently twice as high among those using tools with contact trip triggers.

Discussion and impact

Nail gun injuries can be reduced markedly through early training and use of tools with sequential actuation. These successful efforts need to be diffused broadly, including to the non-union sector.     

Time trends and predictive factors for safety perceptions among incoming South Australian university students

Problem

Young workers are over-represented in injury statistics. In order to develop injury prevention strategies, this study investigated time trends and predictive factors relating to safety skills, confidence, and attitudes.

Method

Annual surveys were conducted from 2006-2009 among incoming students at the University of Adelaide. The questions addressed safety training, injury experience, and health and safety perceptions.

Results

Time trends in training, perceived safety skills, confidence, and attitudes were not significant. In terms of skills and confidence, the most important correlate was safety training outside of high school (odds ratio = 1.6), especially when repeated, assessed, or in face to face mode. Feeling strongly about safety issues was best predicted by injury experience (OR = 1.7) and gender.

Discussion

These results emphasize the value of assessed training, but they are also consistent with published U.S. data, indicating no improvement over time. It is suggested that there be a more integrated approach in safety education, involving schools and workplaces.

Impact on industry

By developing an understanding of student safety perceptions and experiences, this research aims to target strategies to reduce the excess injury rate for young workers. Workplaces should be more aware of the limitations of school-based safety education and a more integrated and evidence-based approach should be developed, involving schools and workplaces.     

Mitigating construction safety risks using prevention through design

Introduction

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD).

Method

This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs.

Results

Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction.

Impact on industry

The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance.     

The impact of a peer-led participatory health and safety training program for Latino day laborers in construction

Background

Immigrant Latino day laborers working in residential construction are at particularly high risk of fatal and non-fatal traumatic injury and benefit from targeted training.

Objective

To understand the impact of a participatory, peer-facilitated health and safety awareness training customized to the needs of Latino day laborers.

Methods

Baseline surveys exploring exposures, PPE use, attitudes, work practices and work-related injuries were collected from more than 300 New Jersey Latino day laborers in construction prior to their participation in a one day (minimum of six hour) Spanish language health and safety training class. The classes, led by trained worker trainers, engaged participants in a series of tasks requiring teamwork and active problem solving focused on applying safe practices to situations they encounter at their worksites. Follow-up surveys were difficult to obtain among mobile day laborers, and were collected from 70 men (22% response rate) 2-6 months following training. Chi-square analysis was used to compare pre- and post-intervention PPE use, self protective actions, and self-reported injury rates. Focus groups and in-depth interviews addressing similar issues provided a context for discussing the survey findings.

Results

At baseline, the majority of day laborers who participated in this study reported great concern about the hazards of their work and were receptive to learning about health and safety despite limited influence over employers. Changes from baseline to follow-up revealed statistically significant differences in the use of certain types of PPE (hard hats, work boots with steel toes, safety harnesses, and visible safety vests), and in the frequency of self-protective work practices (e.g., trying to find out more about job hazards on your own). There was also a suggestive decrease in self-reported injuries (receiving an injury at work serious enough that you had to stop working for the rest of the day) post-training based on small numbers. Sixty-six percent of workers surveyed post-training reported sharing information from their safety workbook with friends and co-workers. Focus groups and interview results generally confirmed the quantitative findings.

Conclusions

Participatory, peer led training tailored to the needs of construction day laborers may have a positive effect on Latino immigrant workers’ attitudes, work practices, and self reported injury rates, but major changes would require employer engagement.

Impact on Industry

Health and safety researchers have identified reducing the number of traumatic injuries among the immigrant construction workforce as an increasingly important priority. This project provides one model for collaboration between university-based researchers, a union, and a community-based organization. The specific elements of this project—participatory curriculum customized to the needs of day laborers in residential construction, training day laborers to facilitate training classes, and involving peer leaders in outreach and research—could be adapted by other organizations. The findings of this study suggest that the Latino day laborers have a strong interest in and some ability to act on health and safety information. Widespread implementation of this type of training, especially if supported with cooperation from residential contractors, could lead to reduced rates of traumatic injury in the residential construction industry.     

Comparison of risk factors for falls from height between commercial and residential roofers

Introduction

The purpose of this investigation was to compare commercial roofers and residential roofers in terms of their behaviors, beliefs, working conditions, and attitudes toward the use of fall protection devices, which could lead to fall accidents.

Methods

A cross-sectional sample of 252 roofers participated in the survey in the Midwest (Wisconsin, Illinois, Michigan, Indiana, and Iowa).

Results

Residential roofers were more likely to fall (adjusted prevalence ratio = 1.57, 95% CI = 0.86, 2.27) than commercial roofers. Existence of fall protection programs, enforcement of fall protection device use, actual use of fall protection devices, work type, company size, and race/ethnicity were significantly associated with fall accidents.

Impact on industry

This study adds insight into fall accidents from roofs in the construction industry and provides industry-specific cautions against fall accidents that can be reflected in regulatory agency implementation.     

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry

Introduction

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period.

Method

This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant handson experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison.

Results

The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry.

Impact on Industry

It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

On-road and simulated driving: concurrent and discriminant validation

Introduction

A converging pair of studies investigated the validity of a simulator for measuring driving performance/skill.

Study 1

A concurrent validity study compared novice driver performance during an on-road driving test with their performance on a comparable simulated driving test.

Results

Results showed a reasonable degree of concordance in terms of the distribution of driving errors on-road and errors on the simulator. Moreover, there was a significant relationship between the two when driver performance was rank ordered according to errors, further establishing the relative validity of the simulator. However, specific driving errors on the two tasks were not closely related suggesting that absolute validity could not be established and that overall performance is needed to establish the level of skill.

Study 2

A discriminant validity study compared driving performance on the simulator across three groups of drivers who differ in their level of experience - a group of true beginners who had no driving experience, a group of novice drivers who had completed driver education and had a learner's permit, and a group of fully licensed, experienced drivers.

Results

The findings showed significant differences among the groups in the expected direction -- the various measures of driving errors showed that beginners performed worse than novice drivers and that experienced drivers had the fewest errors. Collectively, the results of the concurrent and discriminant validity studies support the use of the simulator as a valid measure of driving performance for research purposes.

Impact on industry

These findings support the use of a driving simulator as a valid measure of driving performance for research purposes. Future research should continue to examine validity between on-road driving performance and performance on a driving simulator and the use of simulated driving tests in the evaluation of driver education/training programs.     

Case-control and cross-sectional methods for estimating crash modification factors: comparisons from roadway lighting and lane and shoulder width safety effect studies

Problem

While observational before-after studies are considered the industry standard for developing crash modification factors (CMFs), there are practical limitations that may preclude their use in highway safety analysis. There is a need to explore alternative methods for estimating CMFs.

Method

This paper employs case-control and cross-sectional analyses to estimate CMFs for fixed roadway lighting and the allocation of lane and shoulder widths.

Results

Based on the case-control method, the CMF for intersection lighting is 0.886, while the cross-sectional study indicates a CMF of 0.881. The CMFs developed for lane and shoulder widths are also similar when comparing the two methods.

Conclusions

This paper suggests that case-control and cross-sectional studies produce consistent results if care is taken in the study design and model development.

Impact on industry

Case-control and cross-sectional studies may provide a viable alternative to estimate CMFs when a before-after study is impractical due to data restrictions.     

Disparities in the prevalence of smoke alarms in U.S. households: Conclusions drawn from published case studies

Introduction

Deaths from fires and burns are a leading cause of fatal home injury in the United States. Smoke alarms are one of the most effective interventions to prevent residential fire deaths. Nationwide, more than 95% of homes are estimated to have at least one smoke alarm. There is evidence that homes at highest risk of fire deaths lag behind national averages in smoke alarm use and maintenance.

Method

We compiled a comprehensive list of published studies that focus on smoke alarm prevalence in high-risk homes. Our findings show that there are substantial gaps in both smoke alarm presence and functional status between high-risk homes and national average estimates.

Conclusions

To save more lives, improved efforts are needed to reduce the disparity in smoke alarm prevalence and functional use in the United States.     

What is the potential of trauma registry data to be used for road traffic injury surveillance and informing road safety policy?

Introduction

Information from hospital trauma registries is increasingly being used to support injury surveillance efforts. This research examines the potential of using trauma registry data for road traffic injury surveillance for different types of road users in terms of both the information collected and how representative trauma data are compared to two population-based road traffic injury data collections.

Methods

The three data collections were assessed against recommended variables to be collected for injury surveillance purposes and the representativeness of the distribution of road traffic-related injury data from the trauma registry was compared to hospital admission and road traffic authority data collections.

Results

Data from the trauma registry was largely not representative of the distribution of age groups or activities compared to the two population-based collections, but was representative for gender for some road user groups to at least one population-based data collection.

Conclusions

Trauma data could be used to supplement information from population-based data collections to inform road safety efforts.

Impact on Industry

Road safety policy makers should be aware of the potential and the limitations of using trauma registry data for road traffic injury surveillance.     

When may road fatalities start to decrease?

Introduction

The comparative analysis of macroscopic trends in road safety has been a popular research topic. The objective of this research is to propose a simple and, at the same time, reliable multiple regime model framework for international road safety comparisons, allowing for the identification of slope changes of personal risk curves and respective breakpoints.

Method

The trends of road traffic fatalities in several EU countries have been examined through the temporal evolution of elementary socioeconomic indicators, namely motorized vehicle fleet and population, at the country level.

Results

Piece-wise linear regression models have been fitted, using a methodology that allows the simultaneous estimation of all slopes and breakpoints. The number and location of breakpoints, as well as the slope of the connecting trends, vary among countries, thus indicating different road safety evolution patterns.

Impact on industry

Macroscopic analysis of road accident trends may be proved beneficial for the identification of best examples and the implementation of appropriate programmes and measures, which will lead to important benefits for the society and the economy through the reduction of road fatalities and injuries. Best performing countries and the related programmes and measures adopted may concern several safety improvements at the processes of the road, the vehicle and the insurance industries.

Conclusions

Lessons from the analysis of the past road safety patterns of developed countries provide some insight into the underlying process that relates motorization levels with personal risk and can prove to be beneficial for predicting the road safety evolution of developing countries that may have not yet reached the same breakpoints. Furthermore, the presented framework may serve as a basis to build more elaborate models, including more reliable exposure indicators (such as vehicle-km driven).     

A reporting guide for studies on individual differences in traffic safety

Problem

Studies on individual differences in traffic safety report differently on their methodologies, and use different statistics, and these are therefore difficult to compare and meta-analyze.

Method

Based upon a previous, extensive review and meta-analysis of the traffic safety literature, several recommendations are made about what features of the methodology of studies on individual differences (including evaluations) in safety need to be reported to facilitate interpretation and meta-analysis. Similarly, some basic types of statistical values are recommended.

Impact on Industry

The accumulation of knowledge about individual differences in traffic safety would be facilitated if scientific authors and journals adhered to these guidelines.     

Effect of enhanced seat belt reminders on driver fatality risk

Objective

Enhanced seat belt reminders in automobiles have been shown to increase belt use rates by approximately 3 percentage points. The objective of this study was to estimate the effect of enhanced seat belt reminders on driver fatality risk.

Method

Data included all passenger vehicle driver deaths and vehicle registration counts in the United States for calendar years 2000-2007. Driver fatality rates per vehicle registration per year were compared for otherwise identical vehicle models with and without enhanced seat belt reminders.

Results

Driver fatality rates were 6% lower for vehicles with enhanced seat belt reminders compared with vehicles without enhanced belt reminders. After adjusting for vehicle age differences, the estimated effect of enhanced belt reminders on driver fatality risk ranged from a 9% reduction for General Motors vehicles to a 2% increase for Honda vehicles. Combining all manufacturers, enhanced belt reminders reduced fatality risk by approximately 2%. Although not statistically significant, the 2% reduction in fatality risk agrees with what should be expected from a 3 percentage point increase in seat belt use rates.

Conclusions

Enhanced seat belt reminders have raised driver belt use rates and reduced fatality rates, but more aggressive systems may be needed for some drivers. It can be inferred that nonfatal injury rates also have been reduced.

Impact on Industry

Manufacturers should be encouraged to put enhanced seat belt reminders on all vehicles as soon as possible.     

The development and validation of a psychological contract of safety scale

Introduction

This paper builds on previous research by the author and describes the development and validation of a new measure of the psychological contract of safety. The psychological contract of safety is defined as the beliefs of individuals about reciprocal safety obligations inferred from implicit and explicit promises.

Method

A psychological contract is established when an individual believes that perceived employer and employee safety obligations are contingent on each other. A pilot test of the measure is first undertaken with participants from three different occupations: nurses, construction workers, and meat processing workers (N = 99). Item analysis is used to refine the measure and provide initial validation of the scale. A larger validation study is then conducted with a participant sample of health care workers (N = 424) to further refine the measure and to determine the psychometric properties of the scale.

Results

Item and correlational analyses produced the final employer and employee obligations scales, consisting of 21 and 17 items, respectively. Factor analyses identified two underlying dimensions in each scale comparable to that previously established in the organizational literature. These transactional and relational-type obligations provided construct validity of the scale. Internal consistency ratings using Cronbach's alpha found the components of the psychological contract of safety measure to be reliable.

Impact on Industry

The refined and validated psychological contract of safety measure will allow investigation of the positive and negative outcomes associated with fulfilment and breach of the psychological contract of safety in future research.     

Fall arrest characteristics of a scissor lift

Problem

Census of Fatal Occupational Injuries (CFOI) data indicate 306 aerial lift fatalities between 1992-2003. Seventy-eight of these fatalities specifically involved scissor lifts. Members of standards committees have requested that NIOSH conduct research to determine the effects of safety-control practices related to using fall-protection systems for scissor lifts.

Method

This research examined the structural and dynamic stability of a scissor lift subjected to fall arrest forces. This was accomplished by conducting drop tests from a scissor lift. Anchorage locations evaluated included manufacturer-supplied anchorage points on the scissor lift platform as well as mid-rail and top-rail locations.

Results

Preliminary drop tests determined that a 2400 lb maximum arrest force (MAF) could be generated by dropping 169 lb through a fall height of 36” using Nystron® rope as a lanyard. The scissor lift maintained structural and dynamic stability for all drop tests when fully extended and on an incline.

Discussion

Anchoring a fall arrest system to either the mid-rail or top-rail is not a recommended practice by the scissor lift manufacturer. Anchor points are provided on the platform floor of the scissor lift for this purpose. However, our results demonstrate that the mid-rail and top-rail absorb substantial energy from an arrested fall and may have potential as appropriate anchorage points.

Impact to Industry

Employers and workers should consider implementing fall arrest systems when using scissor lifts as part of their overall risk mitigation plan for fall injury prevention.     

The business cycle and the incidence of workplace injuries: evidence from the U.S.A

Introduction

The current study explored the association between the business cycle and the incidence of workplace injuries to identify cyclically sensitive industries and the relative contribution of physical capital and labor utilization within industries.

Method

Bureau of Labor Statistics nonfatal injury rates from 1976 through 2007 were examined across five industry sectors with respect to several macroeconomic indicators. Within industries, injury associations with utilization of labor and physical capital over time were tested using time series regression methods.

Results

Pro-cyclical associations between business cycle indicators and injury incidence were observed in mining, construction, and manufacturing but not in agriculture or trade. Physical capital utilization was the highest potential contributor to injuries in mining while labor utilization was the highest potential contributor in construction. In manufacturing each effect had a similar association with injuries.

Conclusion

The incidence of workplace injury is associated with the business cycle. However, the degree of association and the mechanisms through with the business cycle affects the incidence of workplace injuries was not the same across industries.

Impact on Industry

The results suggest that firms in the construction, manufacturing, and mining industries should take additional precautionary safety measures during cyclical upturns. Potential differences among industries in the mechanisms through which the business cycle affects injury incidence suggest different protective strategies for those industries. For example, in construction, additional efforts might be undertaken to ensure workers are adequately trained and not excessively fatigued, while safety procedures continue to be followed even during boom times.     

Re-education of young driving offenders; Effects on self-reports of driver behavior

Introduction

Offending drivers are often re-educated, but these courses have seldom been shown to have any safety effects.

Method

An on-line improvement course for offending drivers below the age of 25 was evaluated with several driver inventories.

Results

The drivers reported higher levels of aggression, stress, sensation seeking, drunk driving, and driving violations, six months after the course than before. However, these levels were lower than those of controls, indicating that the initially low levels for the education group were due to socially desirable responding, as measured by a lie scale, an effect that waned after the course.

Discussion

The results can be interpreted as a positive effect of the education, although this conclusion is tentative and not in agreement with all effects in the data.

Impact on industry

The results are in disagreement with previous evaluation studies using the same or similar instruments, and show the need to include controls for social desirability in self-report studies.     

Visual performance for trip hazard detection when using incandescent and led miner cap lamps

Introduction

Accident data for 2003-2007 indicate that slip, trip, and falls (STFs) are the second leading accident class (17.8%, n = 2,441) of lost-time injuries in underground mining. Proper lighting plays a critical role in enabling miners to detect STF hazards in this environment. Often, the only lighting available to the miner is from a cap lamp worn on the miner's helmet. The focus of this research was to determine if the spectral content of light from light-emitting diode (LED) cap lamps enabled visual performance improvements for the detection of tripping hazards as compared to incandescent cap lamps that are traditionally used in underground mining. A secondary objective was to determine the effects of aging on visual performance.

Method

The visual performance of 30 subjects was quantified by measuring each subject's speed and accuracy in detecting objects positioned on the floor both in the near field, at 1.83 meters, and far field, at 3.66 meters. Near field objects were positioned at 0 degrees and ± 20 degrees off axis, while far field objects were positioned at 0 degrees and ± 10 degrees off axis. Three age groups were designated: group A consisted of subjects 18 to 25 years old, group B consisted of subjects 40 to 50 years old, and group C consisted of subjects 51 years and older.

Results

Results of the visual performance comparison for a commercially available LED, a prototype LED, and an incandescent cap lamp indicate that the location of objects on the floor, the type of cap lamp used, and subject age all had significant influences on the time required to identify potential trip hazards. The LED-based cap lamps enabled detection times that were an average of 0.96 seconds faster compared to the incandescent cap lamp. Use of the LED cap lamps resulted in average detection times that were about 13.6% faster than those recorded for the incandescent cap lamp. The visual performance differences between the commercially available LED and prototype LED cap lamp were not statistically significant.

Impact on Industry

It can be inferred from this data that the spectral content from LED-based cap lamps could enable significant visual performance improvements for miners in the detection of trip hazards.     

Dogs and cats as environmental fall hazards

Problem

Falls are the leading cause of non-fatal injuries in the United States. This study assessed the prevalence of fall injuries associated with cats and dogs in the United States and describes the types of injuries sustained, the location, activity, and circumstances under which they occurred.

Methods

Data were from a nationally representative sample of emergency department visits from January 1, 2001 to December 31, 2006, available through the National Electronic Injury Surveillance System All Injury Program (NEISS-AIP).

Results

Based on 7,456 cases, an estimated 86,629 fall injuries each year were associated with cats and dogs, for an injury rate of 29.7. There were 7.5 times as many injuries involving dogs as cats and females were 2.1 times more likely to be injured than males. Injury rates were highest among people aged ≥ 75, but pets were a fall hazard for all ages. Fractures and contusions or abrasions were the most common injuries; the highest rates were for injuries to the extremities. About 66.4% of falls associated with cats and 31.3 % of falls associated with dogs were caused by falling or tripping over the pet. An additional 21.2% of falls related to dogs were caused by being pushed or pulled.

Summary

Although pets were associated with fall injuries, this risk can be reduced by increasing public awareness about situations that can lead to falls, such as dog-walking and chasing pets, and by calling attention to the importance of obedience training for dogs to minimize hazardous behaviors such as pulling and pushing.

Impact on industry

Fall injuries represent a burden to individuals, our society and our health care system. Increasing public awareness and implementing basic prevention strategies can help people of all ages enjoy their pets, reduce their chances of experiencing pet-related falls, and lessen the impact of fall injuries on our health care system.