Fall arrest characteristics of a scissor lift

Problem

Census of Fatal Occupational Injuries (CFOI) data indicate 306 aerial lift fatalities between 1992-2003. Seventy-eight of these fatalities specifically involved scissor lifts. Members of standards committees have requested that NIOSH conduct research to determine the effects of safety-control practices related to using fall-protection systems for scissor lifts.

Method

This research examined the structural and dynamic stability of a scissor lift subjected to fall arrest forces. This was accomplished by conducting drop tests from a scissor lift. Anchorage locations evaluated included manufacturer-supplied anchorage points on the scissor lift platform as well as mid-rail and top-rail locations.

Results

Preliminary drop tests determined that a 2400 lb maximum arrest force (MAF) could be generated by dropping 169 lb through a fall height of 36” using Nystron® rope as a lanyard. The scissor lift maintained structural and dynamic stability for all drop tests when fully extended and on an incline.

Discussion

Anchoring a fall arrest system to either the mid-rail or top-rail is not a recommended practice by the scissor lift manufacturer. Anchor points are provided on the platform floor of the scissor lift for this purpose. However, our results demonstrate that the mid-rail and top-rail absorb substantial energy from an arrested fall and may have potential as appropriate anchorage points.

Impact to Industry

Employers and workers should consider implementing fall arrest systems when using scissor lifts as part of their overall risk mitigation plan for fall injury prevention.     

The effect of work hours on adverse events and errors in health care

Introduction

We studied the relationship between registered nurses' extended work duration with adverse events and errors, including needlestick injuries, work-related injuries, patient falls with injury, nosocomial infections, and medication errors.

Method

Using bivariate and multivariate logistic regression, this secondary analysis of 11,516 registered nurses examined nurse characteristics, work hours, and adverse events and errors.

Results

All of the adverse event and error variables were significantly related to working more than 40 hours in the average week. Medication errors and needlestick injuries had the strongest and most consistent relationships with the work hour and voluntary overtime variables.

Discussion

This study confirms prior findings that increased work hours raise the likelihood of adverse events and errors in healthcare, and further found the same relationship with voluntary overtime.

Impact on Industry

Legislation has focused on mandatory overtime; however, this study demonstrated that voluntary overtime could also negatively impact nurse and patient safety.     

Required hours of practice for learner drivers: A comparison between two Australian jurisdictions

Problem

This study considers whether requiring learner drivers to complete a set number of hours while on a learner license affects the amount of hours of supervised practice that they undertake. It compares the amount of practice that learners in Queensland and New South Wales report undertaking. At the time the study was conducted, learner drivers in New South Wales were required to complete 50 hours of supervised practice while those from Queensland were not.

Method

Participants were approached outside driver licensing centers after they had just completed their practical driving test to obtain their provisional (intermediate) license. Those agreeing to participate were interviewed over the phone later and asked a range of questions to obtain information including socio-demographic details and amount of supervised practice completed.

Results

There was a significant difference in the amount of practice that learners reported undertaking. Participants from New South Wales reported completing a significantly greater amount of practice (M = 73.3 hours, sd = 29.12 hours) on their learner license than those from Queensland (M = 64.1 hours, sd = 51.05 hours). However, the distribution of hours of practice among the Queensland participants was bimodal in nature. Participants from Queensland reported either completing much less or much more practice than the New South Wales average.

Summary

While it appears that the requirement that learner drivers complete a set number of hours may increase the average amount of hours of practice obtained, it may also serve to discourage drivers from obtaining additional practice, over and above the required hours.

Impact on Industry

The results of this study suggest that the implications of requiring learner drivers to complete a set number of hours of supervised practice are complex. In some cases, policy makers may inadvertently limit the amount of hours learners obtain to the mandated amount rather than encouraging them to obtain as much practice as possible.     

Analysis of bus collision and non-collision incidents using transit ITS and other archived operations data

Introduction

This paper analyzes factors contributing to bus operations safety incidents at TriMet, the transit provider for the Portland Oregon metropolitan region.

Method

The analysis focuses on 4,631 collision and non-collision incidents that occurred between 2006 and 2009. Empirical analysis of these incidents draws on a wide array of operator-level data recovered by transit ITS technologies in combination with information from TriMet's human resources, scheduling, and customer relations databases. Incident frequencies are estimated in relation to operators' demographic characteristics, employment status, assigned work characteristics, service delivery and performance indicators, temporal factors, and customer information.

Results

Apart from identifying factors that are empirically related to the frequency of safety incidents, the findings offer insights into operations policies and practices that hold promise for improving safety.

Impact on Industry

Potential for safety improvement based on analysis of archived operations and human resource data.     

On-road and simulated driving: concurrent and discriminant validation

Introduction

A converging pair of studies investigated the validity of a simulator for measuring driving performance/skill.

Study 1

A concurrent validity study compared novice driver performance during an on-road driving test with their performance on a comparable simulated driving test.

Results

Results showed a reasonable degree of concordance in terms of the distribution of driving errors on-road and errors on the simulator. Moreover, there was a significant relationship between the two when driver performance was rank ordered according to errors, further establishing the relative validity of the simulator. However, specific driving errors on the two tasks were not closely related suggesting that absolute validity could not be established and that overall performance is needed to establish the level of skill.

Study 2

A discriminant validity study compared driving performance on the simulator across three groups of drivers who differ in their level of experience - a group of true beginners who had no driving experience, a group of novice drivers who had completed driver education and had a learner's permit, and a group of fully licensed, experienced drivers.

Results

The findings showed significant differences among the groups in the expected direction -- the various measures of driving errors showed that beginners performed worse than novice drivers and that experienced drivers had the fewest errors. Collectively, the results of the concurrent and discriminant validity studies support the use of the simulator as a valid measure of driving performance for research purposes.

Impact on industry

These findings support the use of a driving simulator as a valid measure of driving performance for research purposes. Future research should continue to examine validity between on-road driving performance and performance on a driving simulator and the use of simulated driving tests in the evaluation of driver education/training programs.     

Mitigating construction safety risks using prevention through design

Introduction

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD).

Method

This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs.

Results

Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction.

Impact on industry

The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance.     

When may road fatalities start to decrease?

Introduction

The comparative analysis of macroscopic trends in road safety has been a popular research topic. The objective of this research is to propose a simple and, at the same time, reliable multiple regime model framework for international road safety comparisons, allowing for the identification of slope changes of personal risk curves and respective breakpoints.

Method

The trends of road traffic fatalities in several EU countries have been examined through the temporal evolution of elementary socioeconomic indicators, namely motorized vehicle fleet and population, at the country level.

Results

Piece-wise linear regression models have been fitted, using a methodology that allows the simultaneous estimation of all slopes and breakpoints. The number and location of breakpoints, as well as the slope of the connecting trends, vary among countries, thus indicating different road safety evolution patterns.

Impact on industry

Macroscopic analysis of road accident trends may be proved beneficial for the identification of best examples and the implementation of appropriate programmes and measures, which will lead to important benefits for the society and the economy through the reduction of road fatalities and injuries. Best performing countries and the related programmes and measures adopted may concern several safety improvements at the processes of the road, the vehicle and the insurance industries.

Conclusions

Lessons from the analysis of the past road safety patterns of developed countries provide some insight into the underlying process that relates motorization levels with personal risk and can prove to be beneficial for predicting the road safety evolution of developing countries that may have not yet reached the same breakpoints. Furthermore, the presented framework may serve as a basis to build more elaborate models, including more reliable exposure indicators (such as vehicle-km driven).     

A traffic safety evaluation of California's traffic violator school citation dismissal policy

Introduction

This study evaluated California's traffic violator school (TVS) citation dismissal policy.

Method

This study identified and compared two large samples of drivers either completing a TVS (N = 210,015) or convicted of a traffic citation (N = 168,563).

Results

Prior to adjudication, the TVS group had characteristics (e.g., lower prior conviction rate and smaller proportion of males) that were predictive of a lower subsequent crash risk. However, the TVS group exhibited significantly more crashes than did the convicted group in the subsequent one-year period. The difference (4.83%) increased to 10% after adjusting for the more favorable characteristics of the TVS group. The TVS group also had a higher adjusted subsequent crash rate at each prior driver record entry level, reflecting a loss in the general and specific deterrence of the non-conviction masked status of TVS dismissed citations. It was reported that the TVS dismissal policy results in approximately 12,300 additional crashes annually with economic costs of approximately $398,000,000.

Conclusions

The avoidance of licensing actions resulting from the dismissal policy assists in explaining why the driving public is exposed to an increased crash risk. A number of recommendations are offered to reduce the negative traffic safety impact of the TVS citation dismissal policy.     

Crash involvement during the different phases of the New Zealand Graduated Driver Licensing System (GDLS)

Introduction

The New Zealand Graduated Driver Licensing System (GDLS) is designed to allow novice drivers to gain driving experience under conditions of reduced risk.

Method

To examine the effectiveness of the GDLS, an analysis of how the crash involvement of novice drivers changes as drivers move through the GDLS was undertaken. Crash profiles were created by data matching the New Zealand license and crash databases, covering a time period from 1999-2006.

Results

The crash profiles show that the initial learner period of the GDLS is relatively safe and the time at which novice drivers have the highest rate of crash involvement is during the first few months of solo driving. Analysis using logistic regression also showed an effect of age and gender, with higher crash involvement associated with younger drivers and males. In addition, individuals who gained a full license within 12-18 months of holding a restricted license, due to completion of a time-discount associated educational program, had a higher level of involvement in crashes than individuals who gained a full license after 18 months.

Conclusions

The crash profiles provide an insight into the crash risk associated with different phases of the New Zealand GDLS.

Impact on Industry

Increasing the age at which drivers first begin to solo drive and the removal of the time-discount associated with completion of an educational program should be considered.     

Winter storm-related injuries in Oklahoma, January 2007

Introduction

A January 2007 ice storm occurred in Oklahoma, causing power outages and hazardous travel conditions. The objective of this investigation was to describe the nature of winter storm-related injuries among Oklahoma residents, to determine populations at risk, and to inform prevention-planning personnel.

Methods

Winter storm-related injuries were a temporarily reportable condition; all acute-care hospitals and the state medical examiner logged storm-related injuries and deaths during January 12 − 30, 2007. Medical records were retrospectively abstracted.Risk of injury was described by demographic group, injury type, and mechanism.

Results

Among 6,047 persons experiencing winter storm-related injuries, 74% were injured in falls, 13% in motor-vehicle collisions (MVCs), 8% while sledding, 1% by unintentional carbon monoxide poisoning, 1% in cleanup activities, and 3% by other mechanisms. Median age of injured persons was 39 years. Persons aged ≥ 40 years were 1.4 times more likely to experience falls as the cause of injury than those aged < 40 years, and falls were twice as likely as other mechanisms to cause fractures among persons aged ≥ 40 years. Injured persons aged < 40 years were 2.2 times more likely to experience MVC-related injuries, and 19 times more likely to experience sledding-related injuries than persons aged ≥ 40 years.

Conclusions

Younger persons were more likely injured in MVCs and sledding incidents, whereas older persons were more likely to experience falls and fractures.

Impact on industry

Prevention messages for winter storm-related injuries should target winter-driving safety tips to younger adults and precautions regarding falls to older adults.     

Re-education of young driving offenders; Effects on self-reports of driver behavior

Introduction

Offending drivers are often re-educated, but these courses have seldom been shown to have any safety effects.

Method

An on-line improvement course for offending drivers below the age of 25 was evaluated with several driver inventories.

Results

The drivers reported higher levels of aggression, stress, sensation seeking, drunk driving, and driving violations, six months after the course than before. However, these levels were lower than those of controls, indicating that the initially low levels for the education group were due to socially desirable responding, as measured by a lie scale, an effect that waned after the course.

Discussion

The results can be interpreted as a positive effect of the education, although this conclusion is tentative and not in agreement with all effects in the data.

Impact on industry

The results are in disagreement with previous evaluation studies using the same or similar instruments, and show the need to include controls for social desirability in self-report studies.     

Hepatitis B virus infection among health care workers in Public Teaching Hospitals in Khartoum State, Sudan

Background

Hepatitis B virus (HBV) infection is a global public health problem. It is estimated that there are more than 300 million HBV carriers in the world.

Aim

The study aimed to examine the sero-prevalence of hepatitis B virus (HBV) markers among health care workers (HCWs) in Public Teaching Hospitals in Khartoum State, in the year 2004.

Methods

The study is an observational, cross sectional, facility-based study. It was conducted on stratified two-stage cluster random sample of 843 subjects. The study followed non-parametric statistical methods, using Z-test for single proportion.

Results

Among the 843 subjects tested for all HBV markers (Anti-HBc, HBsAg, HBsAb, and HBeAg), the prevalence of Anti-HBc, HBsAg, HBsAb, and HBeAg was found to be 57% (CI 95%:53-60%), 6% (CI 95%:4.0-8.0%), 37% (CI 95%:34-40%) and 9% (CI 95%:7-11%) respectively. P < 0.05.

Conclusion

Seroprevalence of all HBV markers (P < 0.05) was found to be significantly high, while the rate of immunity against HBV infection was low among health care workers In Public Teaching Hospitals in Khartoum State, Sudan.     

Evaluating impaired drivers confidence and intention to "(Please) drink responsibly"

Introduction

Currently, alcohol industry-sponsored advertisements subsume traditional designated driver and don't drink and drive messages within responsible drinking campaigns. Yet, to date, there remains a dearth of literature specifically examining the attitudinal beliefs impaired drivers attach to the responsible drinking message.

Objective

This investigation sought to examine the responsible drinking attitudes and beliefs of impaired drivers, specifically examining their confidence and intention to drink responsibly the next time they consumed alcohol.

Methods

A random sample of 729 students attending a large, public Texas university completed a web-based administration of the Characteristic of Responsible Drinking Survey (CHORDS).

Results

Participants in this sample who had driven while impaired by alcohol exhibited significantly less confidence in refraining from drinking and driving and reported significantly lower intentions to designate a driver, take a taxi, or use a safe-ride program the next time they consumed alcohol. Additionally, they also reported less confidence, and lower intentions, to ensure their blood alcohol concentrations remained below the legal limit (0.08%) the next time they consumed alcohol.

Conclusions

Drivers who had driven while impaired significantly differed in their confidence and intention to drink responsibly the next time they consumed alcohol. Logistic regression results indicate that by increasing one's confidence in responsible drinking, and increasing their intention to drink responsibly, the likelihood of impaired driving can be decreased.

Impact on industry

Results from this investigation demonstrate one’s responsible drinking attitudinal beliefs accounts for a significant amount of the variance associated with one’s alcohol-related behaviors. Thus, further research should examine and establish how individuals conceptualize and practice responsible drinking.     

Survival risk factors for fatal injured car and motorcycle drivers in single alcohol-related and alcohol-unrelated vehicle crashes

Introduction

A high percentage of drivers who die as a result of a single vehicle crash are under the influence of alcohol. We aimed to better understand the prevalence of these fatalities and the ratio of death to injuries based on various risk factors. We focused on alcohol-related and -unrelated single-vehicle crashes to investigate the influence of such risk factors on the time until death for car and motorcycle drivers.

Methods

We combined data from national police reports and a vital registration database in Taiwan. Survival analysis using Cox regression models was used to identify the risk factors of time until death.

Results

Overall, nearly 60% of car driver fatalities and 40% of motorcycle driver fatalities involved the consumption of alcohol. Survival analysis of single-vehicle crashes suggested that the traffic island separation between a car moving at a higher speed and motorcycle traffic resulted in a higher risk of death over time for motorcycle drivers who consumed alcohol. The factors attributed to a higher risk of death over time for motorcycle drivers were older age, crashing into trees, night-time driving, driving on curved roads, and driving on local roads. Driving without restraints and driving on roads with higher speed limits attributed to a higher risk of death over time for car drivers.

Conclusions

The factors that influence the risk of death over time in a motor-vehicle accident involving alcohol depended on different elements, which should each be considered when attempting to reduce this risk.

Impact on Industry

More efforts should be made to investigate the various risk factors in areas with large motorcycle populations.     

The development and validation of a psychological contract of safety scale

Introduction

This paper builds on previous research by the author and describes the development and validation of a new measure of the psychological contract of safety. The psychological contract of safety is defined as the beliefs of individuals about reciprocal safety obligations inferred from implicit and explicit promises.

Method

A psychological contract is established when an individual believes that perceived employer and employee safety obligations are contingent on each other. A pilot test of the measure is first undertaken with participants from three different occupations: nurses, construction workers, and meat processing workers (N = 99). Item analysis is used to refine the measure and provide initial validation of the scale. A larger validation study is then conducted with a participant sample of health care workers (N = 424) to further refine the measure and to determine the psychometric properties of the scale.

Results

Item and correlational analyses produced the final employer and employee obligations scales, consisting of 21 and 17 items, respectively. Factor analyses identified two underlying dimensions in each scale comparable to that previously established in the organizational literature. These transactional and relational-type obligations provided construct validity of the scale. Internal consistency ratings using Cronbach's alpha found the components of the psychological contract of safety measure to be reliable.

Impact on Industry

The refined and validated psychological contract of safety measure will allow investigation of the positive and negative outcomes associated with fulfilment and breach of the psychological contract of safety in future research.     

Injury crashes with bicyclists at roundabouts: influence of some location characteristics and the design of cycle facilities

Problem

Previous research indicated that conversions of intersections into roundabouts appear to increase the number of injury crashes with bicyclists. However, it was assumed that the effectiveness of roundabouts could vary according to some differences in design types of cycle, facilities and other geometrical factors.

Method

Regression analyses on effectiveness-indices resulting from a before-and-after study of injury crashes with bicyclists at 90 roundabouts in Flanders, Belgium.

Results

Regarding all injury crashes with bicyclists, roundabouts with cycle lanes appear to perform significantly worse compared to three other design types (mixed traffic, separate cycle paths, and grade-separated cycle paths). Nevertheless, an increase of the severest crashes was noticed, regardless of the design type of the cycle facilities. Roundabouts that are replacing signal-controlled intersections seem to have had a worse evolution compared to roundabouts on other types of intersections.

Impact on industry

The results might affect design guidelines for roundabouts, particularly for the accommodation of bicyclists.     

Is a hands-free phone safer than a handheld phone?

Introduction

Although it is becoming more and more accepted that driving while talking on a cell phone can be hazardous, most jurisdictions are making handheld phone use illegal while allowing hands-free phone use.

Methods

The scientific literature exploring the effects of these two types of cell phone use on driving and driving-related performance is reviewed here.

Results

Our review shows that talking on the phone, regardless of phone type, has negative impacts on performance especially in detecting and identifying events. Performance while using a hands-free phone was rarely found to be better than when using a handheld phone. Some studies found that drivers compensate for the deleterious effects of cell phone use when using a handheld phone but neglect to do so when using a hands-free phone.

Impact on Industry

Current research does not support the decision to allow hands-free phone use while driving.     

Road safety in China: Analysis of current challenges

Introduction

China has the world's largest population, and is the second largest automobile market. China's economy is booming, resulting in a rapid increase in both the road infrastructure and access to private vehicles. Along with economic growth, the ownership of motorized vehicles has almost quadrupled in the past 10 years, from 42.2 million in 1997 to 159.7 million in 2007. However, at the same time, China also has a very high number of road fatalities compared to other countries, with about 100,000 reported fatalities each year.

Method

This study analyzes the Chinese road-fatality situation to identify areas in which the total harm caused by crashes can be substantially and readily reduced. It provides a comprehensive analysis of the current road-fatality situation in China using conventional indices and the likely future trends.

Results

Four areas were identified in which countermeasures have the most potential to substantially reduce fatalities in China: pedestrians and other non-motorists, nighttime driving, vehicle passengers, and motorcycles.

Conclusion

While China faces unprecedented road safety issues, this report identifies major areas in which there are opportunities to greatly reduce total harm.     

Evaluation of guardrail systems for preventing falls through roof and floor holes

Introduction

Fall-related occupational injuries and fatalities are serious problems in the U.S. construction industry, especially incidents related to unguarded holes. The National Institute for Occupational Safety and Health, Division of Safety Research, Morgantown, WV conducted a project to evaluate the effectiveness of guardrail systems to prevent falls through roof and floor holes.

Methods

Two commercial edge-protection products were evaluated when used as perimeter guarding around a roof hole. Installations of the commercial products were compared to job-built guardrails constructed of 2^″ × 4^″ construction-grade lumber. Occupational Safety and Health Administration (OSHA) regulations require that “a force of at least 200 pounds” must be supported by the top rail of a guardrail system “in any outward or downward direction at any point along the top edge.” A laboratory testing system was developed to evaluate this requirement. A dynamic 200-lb force was generated against the top rail using a weighted manikin mounted on a hinged steel frame. Nine construction workers, who served as test subjects, each built five different guardrail configurations.

Results

All 45 configurations met the 200-lb OSHA requirement. Installation time for one commercial product was 32% quicker than the job-built configuration (25.6 min vs. 37.9 min).

Impact on Industry

This study: (a) indicates that the two edge-protection products can be used as perimeter guarding; (b) highlights the importance of using proper materials and fasteners to construct guardrails to protect workers from falling into unguarded roof and floor holes; and (c) discusses an overall-strength-testing methodology that can be used by fall-protection researchers.