Fatal crash trends for Australian young drivers 1997-2007: Geographic and socioeconomic differentials

Background

Little has been published on changes in young driver fatality rates over time. This paper examines differences in Australian young driver fatality rates over the last decade, examining important risk factors including place of residence and socioeconomic status (SES).

Methods

Young driver (17-25 years) police-recorded passenger vehicle crashes were extracted from New South Wales State records from 1997-2007. Rurality of residence and SES were classified into three levels based on drivers’ residential postcode: urban, regional, or rural; and high, moderate, or low SES areas. Geographic and SES disparities in trends of fatality rates were examined by the generalized linear model. Chi-square trend test was used to examine the distributions of posted speed limits, drinking driving, fatigue, seatbelt use, vehicle age, night-time driving, and the time from crash to death across rurality and socioeconomic status.

Results

Young driver fatality rate significantly decreased 5% per year (p < 0.05); however, stratified analyses (by rurality and by SES) showed that only the reduction among urban drivers was significant (average 5% decrease per year, p < 0.01). The higher relative risk of fatality for rural versus urban drivers, and for drivers of low versus high SES remained unchanged over the last decade. High posted speed limits, fatigue, drink driving and seatbelt non-use were significantly associated with rural fatalities, whereas high posted speed limit, fatigue, and driving an older vehicle were significantly related to low SES fatality.

Conclusion

The constant geographic and SES disparities in young driver fatality rates highlight safety inequities for those living in rural areas and those of low SES. Better targeted interventions are needed, including attention to behavioral risk factors and vehicle age.     

Fall arrest characteristics of a scissor lift

Problem

Census of Fatal Occupational Injuries (CFOI) data indicate 306 aerial lift fatalities between 1992-2003. Seventy-eight of these fatalities specifically involved scissor lifts. Members of standards committees have requested that NIOSH conduct research to determine the effects of safety-control practices related to using fall-protection systems for scissor lifts.

Method

This research examined the structural and dynamic stability of a scissor lift subjected to fall arrest forces. This was accomplished by conducting drop tests from a scissor lift. Anchorage locations evaluated included manufacturer-supplied anchorage points on the scissor lift platform as well as mid-rail and top-rail locations.

Results

Preliminary drop tests determined that a 2400 lb maximum arrest force (MAF) could be generated by dropping 169 lb through a fall height of 36” using Nystron® rope as a lanyard. The scissor lift maintained structural and dynamic stability for all drop tests when fully extended and on an incline.

Discussion

Anchoring a fall arrest system to either the mid-rail or top-rail is not a recommended practice by the scissor lift manufacturer. Anchor points are provided on the platform floor of the scissor lift for this purpose. However, our results demonstrate that the mid-rail and top-rail absorb substantial energy from an arrested fall and may have potential as appropriate anchorage points.

Impact to Industry

Employers and workers should consider implementing fall arrest systems when using scissor lifts as part of their overall risk mitigation plan for fall injury prevention.     

The impact of a peer-led participatory health and safety training program for Latino day laborers in construction

Background

Immigrant Latino day laborers working in residential construction are at particularly high risk of fatal and non-fatal traumatic injury and benefit from targeted training.

Objective

To understand the impact of a participatory, peer-facilitated health and safety awareness training customized to the needs of Latino day laborers.

Methods

Baseline surveys exploring exposures, PPE use, attitudes, work practices and work-related injuries were collected from more than 300 New Jersey Latino day laborers in construction prior to their participation in a one day (minimum of six hour) Spanish language health and safety training class. The classes, led by trained worker trainers, engaged participants in a series of tasks requiring teamwork and active problem solving focused on applying safe practices to situations they encounter at their worksites. Follow-up surveys were difficult to obtain among mobile day laborers, and were collected from 70 men (22% response rate) 2-6 months following training. Chi-square analysis was used to compare pre- and post-intervention PPE use, self protective actions, and self-reported injury rates. Focus groups and in-depth interviews addressing similar issues provided a context for discussing the survey findings.

Results

At baseline, the majority of day laborers who participated in this study reported great concern about the hazards of their work and were receptive to learning about health and safety despite limited influence over employers. Changes from baseline to follow-up revealed statistically significant differences in the use of certain types of PPE (hard hats, work boots with steel toes, safety harnesses, and visible safety vests), and in the frequency of self-protective work practices (e.g., trying to find out more about job hazards on your own). There was also a suggestive decrease in self-reported injuries (receiving an injury at work serious enough that you had to stop working for the rest of the day) post-training based on small numbers. Sixty-six percent of workers surveyed post-training reported sharing information from their safety workbook with friends and co-workers. Focus groups and interview results generally confirmed the quantitative findings.

Conclusions

Participatory, peer led training tailored to the needs of construction day laborers may have a positive effect on Latino immigrant workers’ attitudes, work practices, and self reported injury rates, but major changes would require employer engagement.

Impact on Industry

Health and safety researchers have identified reducing the number of traumatic injuries among the immigrant construction workforce as an increasingly important priority. This project provides one model for collaboration between university-based researchers, a union, and a community-based organization. The specific elements of this project—participatory curriculum customized to the needs of day laborers in residential construction, training day laborers to facilitate training classes, and involving peer leaders in outreach and research—could be adapted by other organizations. The findings of this study suggest that the Latino day laborers have a strong interest in and some ability to act on health and safety information. Widespread implementation of this type of training, especially if supported with cooperation from residential contractors, could lead to reduced rates of traumatic injury in the residential construction industry.     

Effect of enhanced seat belt reminders on driver fatality risk

Objective

Enhanced seat belt reminders in automobiles have been shown to increase belt use rates by approximately 3 percentage points. The objective of this study was to estimate the effect of enhanced seat belt reminders on driver fatality risk.

Method

Data included all passenger vehicle driver deaths and vehicle registration counts in the United States for calendar years 2000-2007. Driver fatality rates per vehicle registration per year were compared for otherwise identical vehicle models with and without enhanced seat belt reminders.

Results

Driver fatality rates were 6% lower for vehicles with enhanced seat belt reminders compared with vehicles without enhanced belt reminders. After adjusting for vehicle age differences, the estimated effect of enhanced belt reminders on driver fatality risk ranged from a 9% reduction for General Motors vehicles to a 2% increase for Honda vehicles. Combining all manufacturers, enhanced belt reminders reduced fatality risk by approximately 2%. Although not statistically significant, the 2% reduction in fatality risk agrees with what should be expected from a 3 percentage point increase in seat belt use rates.

Conclusions

Enhanced seat belt reminders have raised driver belt use rates and reduced fatality rates, but more aggressive systems may be needed for some drivers. It can be inferred that nonfatal injury rates also have been reduced.

Impact on Industry

Manufacturers should be encouraged to put enhanced seat belt reminders on all vehicles as soon as possible.     

[Case Study] CityCenter and Cosmopolitan Construction Projects, Las Vegas, Nevada: Lessons learned from the use of multiple sources and mixed methods in a safety needs assessment

Problem

The present study describes a response to eight tragic deaths over an eighteen month times span on a fast track construction project on the largest commercial development project in U.S. history.

Methods

Four versions of a survey were distributed to workers, foremen, superintendents, and senior management. In addition to standard Likert-scale safety climate scale items, an open-ended item was included at the end of the survey.

Results

Safety climate perceptions differed by job level. Specifically, management perceived a more positive safety climate as compared to workers. Content analysis of the open-ended item was used to identify important safety and health concerns which might have been overlooked with the qualitative portion of the survey.

Discussion

The surveys were conducted to understand workforce issues of concern with the aim of improving site safety conditions. Such efforts can require minimal investment of resources and time and result in critical feedback for developing interventions affecting organizational structure, management processes, and communication.

Summary

The most important lesson learned was that gauging differences in perception about site safety can provide critical feedback at all levels of a construction organization.

Impact on the Industry

Implementation of multi-level organizational perception surveys can identify major safety issues of concern. Feedback, if acted upon, can potentially result in fewer injuries and fatal events.     

Survival risk factors for fatal injured car and motorcycle drivers in single alcohol-related and alcohol-unrelated vehicle crashes

Introduction

A high percentage of drivers who die as a result of a single vehicle crash are under the influence of alcohol. We aimed to better understand the prevalence of these fatalities and the ratio of death to injuries based on various risk factors. We focused on alcohol-related and -unrelated single-vehicle crashes to investigate the influence of such risk factors on the time until death for car and motorcycle drivers.

Methods

We combined data from national police reports and a vital registration database in Taiwan. Survival analysis using Cox regression models was used to identify the risk factors of time until death.

Results

Overall, nearly 60% of car driver fatalities and 40% of motorcycle driver fatalities involved the consumption of alcohol. Survival analysis of single-vehicle crashes suggested that the traffic island separation between a car moving at a higher speed and motorcycle traffic resulted in a higher risk of death over time for motorcycle drivers who consumed alcohol. The factors attributed to a higher risk of death over time for motorcycle drivers were older age, crashing into trees, night-time driving, driving on curved roads, and driving on local roads. Driving without restraints and driving on roads with higher speed limits attributed to a higher risk of death over time for car drivers.

Conclusions

The factors that influence the risk of death over time in a motor-vehicle accident involving alcohol depended on different elements, which should each be considered when attempting to reduce this risk.

Impact on Industry

More efforts should be made to investigate the various risk factors in areas with large motorcycle populations.     

Epidemiology of subway-related fatalities in New York City, 1990-2003

Problem

Subway transit is a relatively safe mode of transportation, yet compared to all other forms of mass transit in the United States (U.S.), subways have the highest fatality rate. The aim of this paper is to characterize subway-related fatalities in order to identify opportunities for risk reduction.

Method

Medical examiner records for all New York City (NYC) subway-related deaths (1990-2003) were reviewed. Data were abstracted on decedents' demographics and autopsy findings, including laboratory findings.

Results

There were 668 subway-related fatalities, of these, 10 (1.5%) were homicides, 343 (51.3%) were determined to be suicides, and 315 (47.2%) were accidental. Although decedent characteristics varied between fatality categories, they were not particularly informative with regard to prevention.

Conclusion

Prevention strategies that focus on structural controls are likely to be most efficacious in improving the overall safety of the NYC subway systems.

Impact on industry

These findings suggest that structural rather than individual-level interventions would be most successful in preventing subway fatalities.     

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry

Introduction

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period.

Method

This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant handson experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison.

Results

The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry.

Impact on Industry

It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

Continued progress in the prevention of nail gun injuries among apprentice carpenters: What will it take to see wider spread injury reductions?

Problem

Nail guns are a common source of acute, and potentially serious, injury in residential construction.

Method

Data on nail gun injuries, hours worked and hours of tool use were collected in 2008 from union apprentice carpenters (n = 464) through classroom surveys; this completed four years of serial cross-sectional data collection from apprentices. A predictive model of injury risk was constructed using Poisson regression.

Results

Injury rates declined 55% from baseline measures in 2005 with early training and increased use of tools with sequential actuation. Injury rates declined among users of tools with both actuation systems, but the rates of injury were consistently twice as high among those using tools with contact trip triggers.

Discussion and impact

Nail gun injuries can be reduced markedly through early training and use of tools with sequential actuation. These successful efforts need to be diffused broadly, including to the non-union sector.     

When may road fatalities start to decrease?

Introduction

The comparative analysis of macroscopic trends in road safety has been a popular research topic. The objective of this research is to propose a simple and, at the same time, reliable multiple regime model framework for international road safety comparisons, allowing for the identification of slope changes of personal risk curves and respective breakpoints.

Method

The trends of road traffic fatalities in several EU countries have been examined through the temporal evolution of elementary socioeconomic indicators, namely motorized vehicle fleet and population, at the country level.

Results

Piece-wise linear regression models have been fitted, using a methodology that allows the simultaneous estimation of all slopes and breakpoints. The number and location of breakpoints, as well as the slope of the connecting trends, vary among countries, thus indicating different road safety evolution patterns.

Impact on industry

Macroscopic analysis of road accident trends may be proved beneficial for the identification of best examples and the implementation of appropriate programmes and measures, which will lead to important benefits for the society and the economy through the reduction of road fatalities and injuries. Best performing countries and the related programmes and measures adopted may concern several safety improvements at the processes of the road, the vehicle and the insurance industries.

Conclusions

Lessons from the analysis of the past road safety patterns of developed countries provide some insight into the underlying process that relates motorization levels with personal risk and can prove to be beneficial for predicting the road safety evolution of developing countries that may have not yet reached the same breakpoints. Furthermore, the presented framework may serve as a basis to build more elaborate models, including more reliable exposure indicators (such as vehicle-km driven).     

Prioritizing prevention opportunities in the Washington State construction industry, 2003-2007

Objective

This study compares construction industry groups in Washington State by injury severity and cost, and ranks industry groups according to potential for prevention.

Methods

All Washington State workers' compensation compensable claims with date of injury between 2003 and 2007 were classified into North American Industrial Classification System (NAICS) industry groups. Claims were then aggregated by injury type and industry groups were ranked according to a prevention index (PI). The PI is the average of the rank orders of the claim count and the claim incidence rate. A lower PI indicates a higher need for prevention activities. The severity rate was calculated as the number of days of time loss per 10,000 full-time equivalents (FTEs).

Results

For all injury types, construction industry groups occupy 7 of the top 15 PI ranks in Washington State. The severity rate among construction industry groups was twice that for non-construction groups for all injury types. Foundation, structure, and building exterior contractors (NAICS 2381) ranked highest in prevention potential and severity among construction industry groups for most common injury types including falls from elevation, fall on same level, struck by/against, and musculo-skeletal disorders of the neck, back, and upper extremity (WMSDs). Median claim costs by injury type were generally higher among construction industry groups.

Conclusions

The construction industry in Washington State has a high severity rate and potential for prevention. The methods used for characterizing these industry groups can be adapted for comparison within and between other industries and states.

Impact on Industry

These data can be used by industry groups and employers to identify higher cost and higher severity injury types. Knowledge about the relative frequencies and costs associated with different injury types will help employers and construction industry associations make better informed decisions about where prevention efforts are most needed and may have the greatest impact. The results of this study can also be used by industry stakeholders to cooperatively focus on high cost and high severity injuries and explore best practices, interventions, and solutions as demonstrated by efforts to prevent musculoskeletal disorders in masonry (Entzel, Albers, & Welch, 2007). Initiating construction industry groups to focus on high cost and high severity injuries may also help prevent other types of injuries.     

Perceptions of personal vulnerability to workplace hazards in the Australian construction industry

Introduction

The importance of risk perception for workplace safety has been highlighted by the inclusion of risk appraisals in contemporary models of precautionary behavior at work. Optimism bias is the tendency to think that negative events are less likely to happen to oneself than to the average person, and is proposed to be related to the reduced use of precautions.

Method

Building on studies of optimism bias for workplace hazards using samples with heterogenous risk profiles, the current study aimed to investigate whether optimism bias is present in a sample of workers exposed to similar workplace hazards. 175 Australian construction workers completed a brief survey that asked them to rate the likelihood of common construction industry hazards occurring to them and to the average worker of the same age doing the same job. Significant levels of optimism bias were found for many hazards (including being electrocuted, being trapped in a confined space, falling from heights, and causing someone else to have an injury).

Results

Optimism bias was not related to perceived controllability, contrary to findings in other domains, yet consistent with findings of optimism bias for workplace hazards. Optimism bias was not found to be related to a reduction in safe work behaviors, though this may be due to difficulties in measuring safe or precautionary behavior, such as social desirability.

Impact on industry

That most workers think that hazards are less likely to happen to them than to the average worker presents a significant problem because it may ameliorate the efficacy of safety programs, yet constitutes a largely unexplored opportunity for improving workplace safety performance.     

Analysis of bus collision and non-collision incidents using transit ITS and other archived operations data

Introduction

This paper analyzes factors contributing to bus operations safety incidents at TriMet, the transit provider for the Portland Oregon metropolitan region.

Method

The analysis focuses on 4,631 collision and non-collision incidents that occurred between 2006 and 2009. Empirical analysis of these incidents draws on a wide array of operator-level data recovered by transit ITS technologies in combination with information from TriMet's human resources, scheduling, and customer relations databases. Incident frequencies are estimated in relation to operators' demographic characteristics, employment status, assigned work characteristics, service delivery and performance indicators, temporal factors, and customer information.

Results

Apart from identifying factors that are empirically related to the frequency of safety incidents, the findings offer insights into operations policies and practices that hold promise for improving safety.

Impact on Industry

Potential for safety improvement based on analysis of archived operations and human resource data.     

The effect of work hours on adverse events and errors in health care

Introduction

We studied the relationship between registered nurses' extended work duration with adverse events and errors, including needlestick injuries, work-related injuries, patient falls with injury, nosocomial infections, and medication errors.

Method

Using bivariate and multivariate logistic regression, this secondary analysis of 11,516 registered nurses examined nurse characteristics, work hours, and adverse events and errors.

Results

All of the adverse event and error variables were significantly related to working more than 40 hours in the average week. Medication errors and needlestick injuries had the strongest and most consistent relationships with the work hour and voluntary overtime variables.

Discussion

This study confirms prior findings that increased work hours raise the likelihood of adverse events and errors in healthcare, and further found the same relationship with voluntary overtime.

Impact on Industry

Legislation has focused on mandatory overtime; however, this study demonstrated that voluntary overtime could also negatively impact nurse and patient safety.     

Occupational fatalities due to electrocutions in the construction industry

Introduction

Occupational fatalities due to contact with electricity account for approximately 9% of all deaths in the construction industry and is the fourth leading cause of death in this industry.

Method

Differences in the proportions of electrocutions in the construction industry are significantly different from other industries based upon the age of the worker and the source of the electricity.

Results

This study found that, in the construction industry, the proportion of occupational fatalities due to contact with electric current is significantly higher for workers in the 16 to 19 years old age group. Contact with overhead power lines occurred more frequently with younger workers, while contact with electric wiring, transformers, and related equipment was found to occur more frequently with older workers. The proportion of fatalities due to this event was also found to account for a significantly greater proportion of fatalities in the construction industry overall.

Impact on industry

The proportions of electrocution fatalities in the construction industry were found to be significantly higher for younger workers when compared to all other industries. Focusing prevention measures toward younger workers who work near overhead power lines could have a significant impact upon death rates. For older workers, the focus should be on those who work on or near transformers, electrical wiring, and components. Across the construction industry, implementation of effective lockout-tagout programs, and verification of energy isolation, can prevent approximately 125 fatalities per year in the construction industry.     

Road safety in China: Analysis of current challenges

Introduction

China has the world's largest population, and is the second largest automobile market. China's economy is booming, resulting in a rapid increase in both the road infrastructure and access to private vehicles. Along with economic growth, the ownership of motorized vehicles has almost quadrupled in the past 10 years, from 42.2 million in 1997 to 159.7 million in 2007. However, at the same time, China also has a very high number of road fatalities compared to other countries, with about 100,000 reported fatalities each year.

Method

This study analyzes the Chinese road-fatality situation to identify areas in which the total harm caused by crashes can be substantially and readily reduced. It provides a comprehensive analysis of the current road-fatality situation in China using conventional indices and the likely future trends.

Results

Four areas were identified in which countermeasures have the most potential to substantially reduce fatalities in China: pedestrians and other non-motorists, nighttime driving, vehicle passengers, and motorcycles.

Conclusion

While China faces unprecedented road safety issues, this report identifies major areas in which there are opportunities to greatly reduce total harm.     

Changes in fall prevention training for apprentice carpenters based on a comprehensive needs assessment

Problem

Falls from heights in residential construction are common, especially among inexperienced workers.

Methods

We conducted a comprehensive needs assessment to determine gaps in the school-based apprentice carpenters' fall prevention training. A team of carpenter instructors and researchers revised the fall prevention training to fill these gaps. Apprentice evaluation and feedback guided ongoing curricular improvements.

Results

Most apprentice carpenters performed work tasks at heights prior to training and fall protection techniques were not commonly used at residential construction sites. Priorities of the revised school-based training included safe ladder habits, truss setting, scaffold use, guarding floor openings, and using personal fall arrest systems. New apprentices were targeted to ensure training prior to exposure at the workplace. We used adult learning principles to emphasize hands-on experiences. A framed portion of a residential construction site was fabricated to practice fall protection behaviors in a realistic setting. The revised curriculum has been delivered consistently and apprentice feedback has been very favorable.

Conclusions

Integration of needs assessment results was invaluable in revising the school-based carpenters apprentice fall prevention curriculum. Working closely with the instructors to tailor learning experiences has provided preliminary positive results.

Impact on Industry

The fall safety of the residential construction industry continues to lag behind commercial construction and industrial settings. The National Occupational Research Agenda includes a Strategic Goal to strengthen and extend the reach of quality training and education in the construction industry via mechanisms such as construction safety and health training needs assessments. This study demonstrates how a structured process can be used to identify and remedy gaps and improve training effectiveness. We encourage others to take steps to assess and increase the impact of training efforts directed at all residential construction professionals; including both union and non-union workers. The implications are even greater in the non-union sector where most U.S. residential work is done.     

Overhead drilling: Comparing three bases for aligning a drilling jig to vertical

Problem

Drilling overhead into concrete or metal ceilings is a strenuous task done by construction workers to hang ductwork, piping, and electrical equipment. The task is associated with upper body pain and musculoskeletal disorders. Previously, we described a field usability evaluation of a foot lever and inverted drill press intervention devices that were compared to the usual method for overhead drilling. Both interventions were rated as inferior to the usual method based on poor setup time and mobility.

Method

Three new interventions, which differed on the design used for aligning the drilling column to vertical, were compared to the usual method for overhead drilling by commercial construction workers (n = 16).

Results

The usual method was associated with the highest levels of regional body fatigue and the poorest usability ratings when compared to the three interventions.

Conclusion

Overall, the 'Collar Base' intervention design received the best usability ratings.

Impact on Industry

Intervention designs developed for overhead drilling may reduce shoulder fatigue and prevent subsequent musculoskeletal disorders. These designs may also be useful for other overhead work such as lifting and supporting materials (e.g., piping, ducts) that are installed near the ceiling. Workplace health and safety interventions may require multiple rounds of field-testing prior to achieving acceptable usability ratings by the end users.     

Mitigating construction safety risks using prevention through design

Introduction

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD).

Method

This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs.

Results

Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction.

Impact on industry

The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance.