Changes in fall prevention training for apprentice carpenters based on a comprehensive needs assessment

Problem

Falls from heights in residential construction are common, especially among inexperienced workers.

Methods

We conducted a comprehensive needs assessment to determine gaps in the school-based apprentice carpenters' fall prevention training. A team of carpenter instructors and researchers revised the fall prevention training to fill these gaps. Apprentice evaluation and feedback guided ongoing curricular improvements.

Results

Most apprentice carpenters performed work tasks at heights prior to training and fall protection techniques were not commonly used at residential construction sites. Priorities of the revised school-based training included safe ladder habits, truss setting, scaffold use, guarding floor openings, and using personal fall arrest systems. New apprentices were targeted to ensure training prior to exposure at the workplace. We used adult learning principles to emphasize hands-on experiences. A framed portion of a residential construction site was fabricated to practice fall protection behaviors in a realistic setting. The revised curriculum has been delivered consistently and apprentice feedback has been very favorable.

Conclusions

Integration of needs assessment results was invaluable in revising the school-based carpenters apprentice fall prevention curriculum. Working closely with the instructors to tailor learning experiences has provided preliminary positive results.

Impact on Industry

The fall safety of the residential construction industry continues to lag behind commercial construction and industrial settings. The National Occupational Research Agenda includes a Strategic Goal to strengthen and extend the reach of quality training and education in the construction industry via mechanisms such as construction safety and health training needs assessments. This study demonstrates how a structured process can be used to identify and remedy gaps and improve training effectiveness. We encourage others to take steps to assess and increase the impact of training efforts directed at all residential construction professionals; including both union and non-union workers. The implications are even greater in the non-union sector where most U.S. residential work is done.     

Continued progress in the prevention of nail gun injuries among apprentice carpenters: What will it take to see wider spread injury reductions?

Problem

Nail guns are a common source of acute, and potentially serious, injury in residential construction.

Method

Data on nail gun injuries, hours worked and hours of tool use were collected in 2008 from union apprentice carpenters (n = 464) through classroom surveys; this completed four years of serial cross-sectional data collection from apprentices. A predictive model of injury risk was constructed using Poisson regression.

Results

Injury rates declined 55% from baseline measures in 2005 with early training and increased use of tools with sequential actuation. Injury rates declined among users of tools with both actuation systems, but the rates of injury were consistently twice as high among those using tools with contact trip triggers.

Discussion and impact

Nail gun injuries can be reduced markedly through early training and use of tools with sequential actuation. These successful efforts need to be diffused broadly, including to the non-union sector.     

Effects of safety climate on safety norm violations: exploring the mediating role of attitudinal ambivalence toward personal protective equipment

Problem

Research on the role of organizational and psychosocial factors in influencing risk behaviors and the likelihood of injury at work showed that safety climate also has great impact on workers’ behavior. However, the mechanisms through which this impact operates are still partially unclear.

Method

In order to explore the role that attitudinal ambivalence toward wearing PPE might play in mediating the impact of safety climate on safety norm violations, a questionnaire was administered to 345 Italian workers.

Results

Three dimensions of safety climate (i.e., company safety concern, senior managers’ safety concern, supervisors’ attitudes towards safety) were found to be positively associated with the individual ambivalence level, whereas the fourth one (i.e., work pressure) was negatively correlated with it. In turn, low levels of ambivalence were associated with a lower tendency to break the safety norms, even though the perception of a good safety climate also maintained a direct effect on unsafe behaviors.

Impact on industry

Designers of training program for the prevention of work related injuries must pay great attention to the psycho-social factors (such as the effects of the safety climate perception by employees on their attitudes and behaviors), and include specific contents into the prevention programs in order to improve workers compliance with safety norms.     

Mitigating construction safety risks using prevention through design

Introduction

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD).

Method

This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs.

Results

Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction.

Impact on industry

The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance.     

The effect of work hours on adverse events and errors in health care

Introduction

We studied the relationship between registered nurses' extended work duration with adverse events and errors, including needlestick injuries, work-related injuries, patient falls with injury, nosocomial infections, and medication errors.

Method

Using bivariate and multivariate logistic regression, this secondary analysis of 11,516 registered nurses examined nurse characteristics, work hours, and adverse events and errors.

Results

All of the adverse event and error variables were significantly related to working more than 40 hours in the average week. Medication errors and needlestick injuries had the strongest and most consistent relationships with the work hour and voluntary overtime variables.

Discussion

This study confirms prior findings that increased work hours raise the likelihood of adverse events and errors in healthcare, and further found the same relationship with voluntary overtime.

Impact on Industry

Legislation has focused on mandatory overtime; however, this study demonstrated that voluntary overtime could also negatively impact nurse and patient safety.     

The business cycle and the incidence of workplace injuries: evidence from the U.S.A

Introduction

The current study explored the association between the business cycle and the incidence of workplace injuries to identify cyclically sensitive industries and the relative contribution of physical capital and labor utilization within industries.

Method

Bureau of Labor Statistics nonfatal injury rates from 1976 through 2007 were examined across five industry sectors with respect to several macroeconomic indicators. Within industries, injury associations with utilization of labor and physical capital over time were tested using time series regression methods.

Results

Pro-cyclical associations between business cycle indicators and injury incidence were observed in mining, construction, and manufacturing but not in agriculture or trade. Physical capital utilization was the highest potential contributor to injuries in mining while labor utilization was the highest potential contributor in construction. In manufacturing each effect had a similar association with injuries.

Conclusion

The incidence of workplace injury is associated with the business cycle. However, the degree of association and the mechanisms through with the business cycle affects the incidence of workplace injuries was not the same across industries.

Impact on Industry

The results suggest that firms in the construction, manufacturing, and mining industries should take additional precautionary safety measures during cyclical upturns. Potential differences among industries in the mechanisms through which the business cycle affects injury incidence suggest different protective strategies for those industries. For example, in construction, additional efforts might be undertaken to ensure workers are adequately trained and not excessively fatigued, while safety procedures continue to be followed even during boom times.     

What is the potential of trauma registry data to be used for road traffic injury surveillance and informing road safety policy?

Introduction

Information from hospital trauma registries is increasingly being used to support injury surveillance efforts. This research examines the potential of using trauma registry data for road traffic injury surveillance for different types of road users in terms of both the information collected and how representative trauma data are compared to two population-based road traffic injury data collections.

Methods

The three data collections were assessed against recommended variables to be collected for injury surveillance purposes and the representativeness of the distribution of road traffic-related injury data from the trauma registry was compared to hospital admission and road traffic authority data collections.

Results

Data from the trauma registry was largely not representative of the distribution of age groups or activities compared to the two population-based collections, but was representative for gender for some road user groups to at least one population-based data collection.

Conclusions

Trauma data could be used to supplement information from population-based data collections to inform road safety efforts.

Impact on Industry

Road safety policy makers should be aware of the potential and the limitations of using trauma registry data for road traffic injury surveillance.     

Time trends and predictive factors for safety perceptions among incoming South Australian university students

Problem

Young workers are over-represented in injury statistics. In order to develop injury prevention strategies, this study investigated time trends and predictive factors relating to safety skills, confidence, and attitudes.

Method

Annual surveys were conducted from 2006-2009 among incoming students at the University of Adelaide. The questions addressed safety training, injury experience, and health and safety perceptions.

Results

Time trends in training, perceived safety skills, confidence, and attitudes were not significant. In terms of skills and confidence, the most important correlate was safety training outside of high school (odds ratio = 1.6), especially when repeated, assessed, or in face to face mode. Feeling strongly about safety issues was best predicted by injury experience (OR = 1.7) and gender.

Discussion

These results emphasize the value of assessed training, but they are also consistent with published U.S. data, indicating no improvement over time. It is suggested that there be a more integrated approach in safety education, involving schools and workplaces.

Impact on industry

By developing an understanding of student safety perceptions and experiences, this research aims to target strategies to reduce the excess injury rate for young workers. Workplaces should be more aware of the limitations of school-based safety education and a more integrated and evidence-based approach should be developed, involving schools and workplaces.     

[Case Study] CityCenter and Cosmopolitan Construction Projects, Las Vegas, Nevada: Lessons learned from the use of multiple sources and mixed methods in a safety needs assessment

Problem

The present study describes a response to eight tragic deaths over an eighteen month times span on a fast track construction project on the largest commercial development project in U.S. history.

Methods

Four versions of a survey were distributed to workers, foremen, superintendents, and senior management. In addition to standard Likert-scale safety climate scale items, an open-ended item was included at the end of the survey.

Results

Safety climate perceptions differed by job level. Specifically, management perceived a more positive safety climate as compared to workers. Content analysis of the open-ended item was used to identify important safety and health concerns which might have been overlooked with the qualitative portion of the survey.

Discussion

The surveys were conducted to understand workforce issues of concern with the aim of improving site safety conditions. Such efforts can require minimal investment of resources and time and result in critical feedback for developing interventions affecting organizational structure, management processes, and communication.

Summary

The most important lesson learned was that gauging differences in perception about site safety can provide critical feedback at all levels of a construction organization.

Impact on the Industry

Implementation of multi-level organizational perception surveys can identify major safety issues of concern. Feedback, if acted upon, can potentially result in fewer injuries and fatal events.     

The development and validation of a psychological contract of safety scale

Introduction

This paper builds on previous research by the author and describes the development and validation of a new measure of the psychological contract of safety. The psychological contract of safety is defined as the beliefs of individuals about reciprocal safety obligations inferred from implicit and explicit promises.

Method

A psychological contract is established when an individual believes that perceived employer and employee safety obligations are contingent on each other. A pilot test of the measure is first undertaken with participants from three different occupations: nurses, construction workers, and meat processing workers (N = 99). Item analysis is used to refine the measure and provide initial validation of the scale. A larger validation study is then conducted with a participant sample of health care workers (N = 424) to further refine the measure and to determine the psychometric properties of the scale.

Results

Item and correlational analyses produced the final employer and employee obligations scales, consisting of 21 and 17 items, respectively. Factor analyses identified two underlying dimensions in each scale comparable to that previously established in the organizational literature. These transactional and relational-type obligations provided construct validity of the scale. Internal consistency ratings using Cronbach's alpha found the components of the psychological contract of safety measure to be reliable.

Impact on Industry

The refined and validated psychological contract of safety measure will allow investigation of the positive and negative outcomes associated with fulfilment and breach of the psychological contract of safety in future research.     

The role of production and teamwork practices in construction safety: A cognitive model and an empirical case study

Problem

In construction, the challenge for researchers and practitioners is to develop work systems (production processes and teams) that can achieve high productivity and high safety at the same time. However, construction accident causation models ignore the role of work practices and teamwork. This study investigates the mechanisms by which production and teamwork practices affect the likelihood of accidents.

Method

The paper synthesizes a new model for construction safety based on the cognitive perspective (Fuller's Task-Demand-Capability Interface model, 2005) and then presents an exploratory case study. The case study investigates and compares the work practices of two residential framing crews: a 'High Reliability Crew' (HRC)—that is, a crew with exceptional productivity and safety over several years, and an average performing crew from the same company.

Results

The model explains how the production and teamwork practices generate the work situations that workers face (the task demands) and affect the workers ability to cope (capabilities). The case study indicates that the work practices of the HRC directly influence the task demands and match them with the applied capabilities. These practices were guided by the 'principle' of avoiding errors and rework and included work planning and preparation, work distribution, managing the production pressures, and quality and behavior monitoring.

Summary

The Task Demand-Capability model links construction research to a cognitive model of accident causation and provides a new way to conceptualize safety as an emergent property of the production practices and teamwork processes. The empirical evidence indicates that the crews' work practices and team processes strongly affect the task demands, the applied capabilities, and the match between demands and capabilities.

Impact on Industry

The proposed model and the exploratory case study will guide further discovery of work practices and teamwork processes that can increase both productivity and safety in construction operations. Such understanding will enable training of construction foremen and crews in these practices to systematically develop high reliability crews.     

What kinds of injuries do OSHA inspections prevent?

Objective

OSHA's enforcement program is one of the major public efforts to protect American workers. We examine both the scope of injury prevention that inspections can contribute and the types of standards that contribute the most.

Methods

We linked Pennsylvania Department of Labor and Industry files for lost-time injuries and employment to calculate injury rates for 1998-2005 for all single-establishment manufacturing firms. We linked these to OSHA inspection records.

Results

Inspections with penalties did affect injury types unrelated to standards as well as those related. We also found again that citations for violations of the standard requiring personal protective equipment had the largest impact on preventing injuries.

Impact on Industry

Programs requiring protective equipment use deserve added attention from consultants and inspectors. In addition, some inspections spur managers to undertake safety measures that go beyond compliance with standards.     

Making work safer: Testing a model of social exchange and safety management

Introduction

This study tests a conceptual model that focuses on social exchange in the context of safety management. The model hypothesizes that supportive safety policies and programs should impact both safety climate and organizational commitment. Further, perceived organizational support is predicted to partially mediate both of these relationships.

Methods

Study outcomes included traditional outcomes for both organizational commitment (e.g., withdrawal behaviors) as well as safety climate (e.g., self-reported work accidents). Questionnaire responses were obtained from 1,723 employees of a large national retailer.

Results

Using structural equation modeling (SEM) techniques, all of the model's hypothesized relationships were statistically significant and in the expected directions. The results are discussed in terms of social exchange in organizations and research on safety climate.

Impact on Industry

Maximizing safety is a social-technical enterprise. Expectations related to social exchange and reciprocity figure prominently in creating a positive climate for safety within the organization.     

Overhead drilling: Comparing three bases for aligning a drilling jig to vertical

Problem

Drilling overhead into concrete or metal ceilings is a strenuous task done by construction workers to hang ductwork, piping, and electrical equipment. The task is associated with upper body pain and musculoskeletal disorders. Previously, we described a field usability evaluation of a foot lever and inverted drill press intervention devices that were compared to the usual method for overhead drilling. Both interventions were rated as inferior to the usual method based on poor setup time and mobility.

Method

Three new interventions, which differed on the design used for aligning the drilling column to vertical, were compared to the usual method for overhead drilling by commercial construction workers (n = 16).

Results

The usual method was associated with the highest levels of regional body fatigue and the poorest usability ratings when compared to the three interventions.

Conclusion

Overall, the 'Collar Base' intervention design received the best usability ratings.

Impact on Industry

Intervention designs developed for overhead drilling may reduce shoulder fatigue and prevent subsequent musculoskeletal disorders. These designs may also be useful for other overhead work such as lifting and supporting materials (e.g., piping, ducts) that are installed near the ceiling. Workplace health and safety interventions may require multiple rounds of field-testing prior to achieving acceptable usability ratings by the end users.     

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry

Introduction

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period.

Method

This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant handson experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison.

Results

The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry.

Impact on Industry

It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

Perceptions of personal vulnerability to workplace hazards in the Australian construction industry

Introduction

The importance of risk perception for workplace safety has been highlighted by the inclusion of risk appraisals in contemporary models of precautionary behavior at work. Optimism bias is the tendency to think that negative events are less likely to happen to oneself than to the average person, and is proposed to be related to the reduced use of precautions.

Method

Building on studies of optimism bias for workplace hazards using samples with heterogenous risk profiles, the current study aimed to investigate whether optimism bias is present in a sample of workers exposed to similar workplace hazards. 175 Australian construction workers completed a brief survey that asked them to rate the likelihood of common construction industry hazards occurring to them and to the average worker of the same age doing the same job. Significant levels of optimism bias were found for many hazards (including being electrocuted, being trapped in a confined space, falling from heights, and causing someone else to have an injury).

Results

Optimism bias was not related to perceived controllability, contrary to findings in other domains, yet consistent with findings of optimism bias for workplace hazards. Optimism bias was not found to be related to a reduction in safe work behaviors, though this may be due to difficulties in measuring safe or precautionary behavior, such as social desirability.

Impact on industry

That most workers think that hazards are less likely to happen to them than to the average worker presents a significant problem because it may ameliorate the efficacy of safety programs, yet constitutes a largely unexplored opportunity for improving workplace safety performance.     

Needle stick and sharps injuries among health care workers in Gondar city, Ethiopia

Background

All employees in health care settings handling needles or other sharps are at risk for needle stick and sharps injuries (NSSIs). Health care workers in under developed countries are at greater risk of infection from blood borne pathogens because of the lack of safety devices and the high prevalence of these pathogens.

Objectives

The aim of this study was to assess the prevalence of NSSIs and associated factors among health care workers in government health institutions in Gondar city, Ethiopia.

Methods

Institution based cross sectional study was conducted from May-December, 2010. The study included 344 health care workers who were selected from the source population using simple random sampling technique. Data were collected through interviews using structured and pre-tested questionnaire and the collected data were entered and analyzed using SPSS version 16.0.

Results

The prevalence of NSSIs among health care workers in the preceding 12 months was 106 (30.8%), of which 58 (54.7%) was reported by females. Lack of training on occupational health and safety, working more than 48 h/week, dissatisfaction with work environment and work culture, greater than 10 years of work experience and having low and moderate perception of risk were found to be significantly associated with NSSIs.

Conclusion

The study found high prevalence of NSSIs among health care workers. Effective training, ongoing awareness on the risk of hazards, preventive measures such as engineering control, and post-exposure prophylaxis following NSSIs are essential to reduce the risk of such injuries.     

Assessing public opinion regarding potential ATV-related policies

Problem

States with laws regarding ATV use and safety have lower mortality and injury rates than states with few or no restrictions. Our objective was to assess the attitudes of registered Ohio voters concerning potential legislation regarding ATV use and safety to determine the feasibility of its enactment.

Method

A statewide telephone survey of 838 registered Ohio voters was conducted and results were weighted by region to accurately represent all Ohio voters.

Results

Registered voters were in favor of restricting the use of ATVs by children < 16 years (81%), prohibiting passengers on ATVs (81%), requiring helmets (78%), and requiring all ATV owners and users to take a safety class (77%). ATV riders indicated that a mandatory helmet law would increase helmet use.

Impact on Industry

Assessing public opinion regarding public health and safety laws is a critical first step when considering legislation to improve ATV safety.