Heavy metal contaminations in the groundwater of Brahmaputra flood plain: an assessment of water quality in Barpeta District, Assam (India)

A study was conducted to evaluate the heavy metal contamination status of groundwater in Brahmaputra flood plain Barpeta District, Assam, India. The Brahmaputra River flows from the southern part of the district and its many tributaries flow from north to south. Cd, Fe, Mn, Pb, and Zn are estimated by using atomic absorption spectrometer, Perkin Elmer AA 200. The quantity of heavy metals in drinking water should be checked time to time; as heavy metal accumulation will cause numerous problems to living being. Forty groundwater samples were collected mainly from tube wells from the flood plain area. As there is very little information available about the heavy metal contamination status in the heavily populated study area, the present work will help to be acquainted with the suitability of groundwater for drinking applications as well as it will enhance the database. The concentration of iron exceeds the WHO recommended levels of 0.3 mg/L in about 80% of the samples, manganese values exceed 0.4 mg/L in about 22.5% of the samples, and lead values also exceed limit in 22.5% of the samples. Cd is reported in only four sampling locations and three of them exceed the WHO permissible limit (0.003 mg/L). Zinc concentrations were found to be within the prescribed WHO limits. Therefore, pressing awareness is needed for the betterment of water quality; for the sake of safe drinking water. Statistical analysis of the data was carried out using Special Package for Social Sciences (SPSS 16).     

Potability of water sources in relation to metal and bacterial contamination in some northern and north-eastern districts of India

A total of 1094 water samples from 326 springs, 207 streams, 183 dug wells, 151 piped supplies, 90 tube wells, 75 hand pumps, 60 rivers and 2 lakes were collected from eight northern and six north-eastern districts of India. Samples were analysed to assess their potability by estimating the level of heavy metals and bacterial (coliform and faecal coliform) contaminations. Iron was found in a maximum number (53%) of water samples from hand pumps, followed by lead in 43% of the tube wells, chromium in 16% of dug wells, cadmium in 13% of streams and manganese in 7% of hand pumps above their maximum admissible concentrations (MACs). Maximum metal pollution has been observed in a considerable number of water samples from Doda, followed by Almora, Mirzapur and Bankura. Hand pump water samples exhibited maximum metal pollution followed by dug well, spring, stream and river water samples. Contamination of coliform and/or faecal coliform bacteria ranged between 41% and 67% of water samples from open water sources but it was also less, i.e. 6–15% of water samples from tube wells and hand pumps. In general, 42–85% of water samples from districts surveyed, except from Jammu (18%) and Mirzapur (27%), were found to be bacteriologically unsatisfactory. Since toxic metals and pathogenic bacteria pose a risk to public health, monitoring of drinking water sources is required.     

Health risk assessment of heavy metal variability in sachet water sold in Ado-Odo Ota,South-Western Nigeria

The sales of sachet water (SW), also known as “pure water” (PW), in Nigeria is a lucrative business. It serves many people, especially low-income earners, by providing a more affordable access to safe drinking water when compared with table water. However, some of the producers of SW do not effectively treat raw water before packaging them for sale. This study investigates the presence and concentrations of heavy metals, such as chromium (Cr), iron (Fe), manganese (Mn), copper (Cu), aluminum (Al), and zinc (Zn) in some samples of SW sold within Ota, Ogun State, Nigeria. Samples of SW from nine different producers were purchased for four consecutive weeks and analyzed to determine the concentrations of these heavy metals in them. Furthermore, health risk indicators, such as chronic daily intake (CDI) and health risk indices (HRI) for children and adults, were calculated separately. The metal concentrations were compared with allowable limits set by the World Health Organization (WHO), Nigerian Industrial Standard (NIS), and the United States Environmental Protection Agency (US EPA). High concentrations of Cr, Fe, and Al were found in all the nine samples and exceeded the maximum allowable limits (MAL) of all the standards considered. However, the concentrations of Zn, Mn, and Cu were within permissible limits. The HRIs of heavy metals were in the order of Cu > Fe > Zn > Mn > Al > Cr, but since the standard limits set for some metals were exceeded, proper and effective treatment is required to safeguard the health of consumers.     

Heavy metals in water,periphytonic algae,detritus, and insects from two streams in Shillong,Notheastern India

Cadmium, copper, manganese, lead and zinc concentrations were determined in water, periphytonic algae, detritus, and larvae of three aquatic insects, viz. Baetis sp. (Ephemeroptera: Baetidae), Hydropsyche sp. (Trichoptera: Hydropsychiidae), and Chironomus ramosus Choudhury and Das (Diptera: Chironomidae), during two surveys from an unpolluted and a polluted stream in Shillong, Meghalaya State, Northeastern India. Metal concentrations were higher in all the samples from the polluted stream, possibly reflecting the contributions from various non-point sources of metal contamination present in its catchment. Among the three insects, Baetis sp. was found to accumulate cadmium, copper, and zinc, and Hydropsyche sp. manganese, to concentrations significantly higher than those found in the other taxa. The concentrations of all the metals were higher in fine detritus than in C. ramosus, although Cd and Zn concentrations were elevated in Baetis as compared to those in periphytonic algae and fine detritus, indicating possible bioconcentration of these metals by this animal.     

Source identification study of heavy metal contamination in the industrial hub of Unnao,India

India's Unnao region is home to many leather-treatment facilities and related industries. Industrial and agricultural waste leads to heavy metal contamination that infiltrates groundwater and leads to human health hazards. This work measured the amount of heavy metal in groundwater at specific sites near the industrial facilities in Unnao and identified potential sources of contamination as anthropogenic or lithogenic. Groundwater samples were taken from 10 bore well sites chosen for depth and proximity to industry. Data obtained from sample sites was interpreted using a multivariate statistical analytical approach, i.e., principal component analysis, clustering analysis, and correlation analysis. The results of the multivariate analysis showed that cadmium, copper, manganese, nickel, lead, and zinc were correlated with anthropogenic sources, while iron and chromium were associated with lithogenic sources. These findings provide information on the possible sources of heavy metal contamination and could be a model for assessing and monitoring heavy metal pollution in groundwater in other locales. This study analyzed a selection of heavy metals chosen on the basis of industries located in the study area, which might not provide a complete range of information about the sources and availability of all heavy metals. Therefore, an extended investigation on heavy metal fractions will be developed in further studies.     

Water quality assessment of Ogun river, South West Nigeria

The quality of Ogun river in South-West, Nigeria was studied by a field survey for a period of 1 year (covering dry season and rainy season). Water samples were collected from thirteen sites and analysed for physico-chemical and bacteriological parameters as well as heavy metals using standard methods. Generally, the values obtained for turbidity, phosphate, oil and grease, iron and faecal coliform from all the sites in both seasons were above the maximum acceptable limit set by the World Health Organization (WHO) for drinking water. Also, the manganese content from all the sites in the dry season, lead concentrations from three sites in the dry season and cadmium concentrations from some sites in both seasons were above the WHO limit. The values obtained for total dissolved solids, dissolved oxygen and chloride at site M in the dry season and nitrate at site J in the rainy season were also above the WHO limit. Pollution of Ogun river water along its course is evidenced by the high concentrations of pollution indicators, nutrients and trace metals above the acceptable limit. This poses a health risk to several rural communities who rely on the river primarily as their source of domestic water. The study showed a need for continuous pollution monitoring programme of surface waters in Nigeria.     

Metal concentrations in water, sediment, and fish from sewage-fed aquaculture ponds of Kolkata, India

The concentrations of lead, cadmium, chromium, copper, and zinc were investigated in the sewage-fed pond water, sediment, and the various organs of Labeo rohita, Catla catla, Cirrhinus mrigala, Oreochromis mossambicus, and Cyprinus carpio cultured in sewage-fed ponds, Kolkata, India. Among the metals, cadmium, lead, and zinc were detected in water and, except lead, were below the water quality guideline levels for the protection of freshwater aquatic life proposed by CEQG (Canadian Environmental Quality Guidelines) and AENV (Alberta Environment). Therefore, lead could pose danger to aquatic organisms. All the five metals were detected in the sediment and, except cadmium and lead, were below the sediment quality guideline levels for aquatic life proposed by EPA (Environmental Protection Agency). Therefore, these two metals could be toxic to aquatic organisms. Significant (P > 0.05) differences were observed among the five fish species for all these metals accumulation. Also, significant (P > 0.05) differences were noticed among these metals accumulation in fish organs. Cadmium showed the least bioaccumulation, while zinc showed the highest bioaccumulation in all the fish species. Though the metal concentration in the different fish tissues was variable, the highest concentration was found in kidney and the lowest in the muscle. Concentrations of these metals in the muscle tissue of all the fish species were well below the consumption safety tolerance in fish set by WHO/FAO, and thus, so far as these metals are concerned, these sewage-fed cultured fishes are safe and suitable for human consumption.     

Consumption of heavy metal contaminated foods and associated risks in Bangladesh

This study investigated the magnitude of heavy metal contamination and determined the carcinogenic as well as non-carcinogenic risks associated with selected food consumption in Bangladesh. Commonly consumed varieties of rice, vegetables, and fish samples were analyzed to measure the concentrations of heavy metals such as cadmium, chromium, lead, arsenic, manganese, nickel, and zinc. These staple food items showed the greatest probabilities of heavy metal contamination in different phases of their production and marketing. Wide variations of metal concentrations were observed. Specifically, estimated daily intakes of arsenic and cadmium exceeded allowable daily intakes in all three food items. Toxicity scores of the metals were evaluated, and a comprehensive risk assessment was conducted to quantify the risks associated with the daily food consumption. Except for cadmium and lead in vegetables, all the contaminants present in each food item posed significant levels of carcinogenic risks up to 2.99?×?10^?3 compared to the EPA recommended carcinogenic risk level of 1.0?×?10^?6. Cadmium and arsenic intake due to rice consumption also posed unsafe levels of non-carcinogenic risks of 4.587 and 6.648, respectively, compared to the EPA recommended non-carcinogenic risk level of 1.0. Finally, a revised set of permissible limits was proposed for the heavy metals detected in the food items. Those permissible limits would ensure the risks associated with food consumption below the allowable carcinogenic and non-carcinogenic risk levels. Thus, this comprehensive approach would provide guidelines to formulate adequate control measures and regulatory limits of toxic metals in foods produced and marketed in Bangladesh.     

Determination of selected heavy metals in air samples from the northern part of Jordan

In this work, the atmospheric concentrations of selected heavy metals including lead (Pb), iron (Fe), cadmium (Cd), copper (Cu), nickel (Ni), manganese (Mn), and zinc (Zn) were measured for two different sampling sites (urban and rural) in the northern part of Jordan (Irbid city). Samples were collected according to a certain schedule for 1 year. High volume air samplers and glass fiber filters were used to collect the samples. Collected samples were digested using a mixture of analytical grade nitric acid and analytical grade hydrochloric acid, and analyzed to evaluate the levels of heavy metals by atomic absorption spectrophotometry. Six heavy metals (Pb, Fe, Cu, Ni, Mn, and Zn) were measured in all samples; the concentrations of Cd and Co were not detected in Irbid atmosphere by atomic absorption spectroscopy. The results were used to determine the levels of heavy metal pollutants in air, possible sources, and to compare the levels of selected heavy metals in the two studied sites. Aerosols from the rural site have lower concentrations for all the metals compared to those from the urban site. The daily and monthly variations of the elements were investigated. All heavy metals in urban and rural sites reached maximum concentrations in June, July, and August. This is consistent with the increased activities leading to particulate matter emission during the summer period. The enrichment factors with respect to earth crust and correlation coefficients of heavy metals were investigated to predict the possible sources of heavy metals in air.     

Groundwater quality and hydrogeochemical properties of Torbalı Region, Izmir, Turkey

The large demand for drinking, irrigation and industrial water in the region of Torbali (Izmir, Turkey) is supplied from groundwater sources. Almost every factory and farm has private wells that are drilled without permission. These cause the depletion of groundwater and limiting the usage of groundwater. This study investigates spatial and temporal change in groundwater quality, relationships between quality parameters, and sources of contamination in Torbali region. For this purpose, samples were collected from 10 different sampling points chosen according to their geological and hydrogeological properties and location relative to factories, between October 2001 and July 2002. Various physical (pH, temperature, EC), chemical (calcium, magnesium, potassium, sodium, chloride, alkalinity, copper, chromium, cadmium, lead, zinc) and organic (nitrate, nitrite, ammonia, COD and cyanide) parameters were monitored. It was observed that the groundwater has bicarbonate alkalinity. Agricultural contamination was determined in the region, especially during the summer. Nitrite and ammonia concentrations were found to be above drinking water standard. Organic matter contamination was also investigated in the study area. COD concentrations were higher than the permissible limits during the summer months of the monitoring period.     

Assessment of heavy metals in some wild edible mushrooms collected from Yunnan Province, China

Eight heavy metals (Cu, Zn, Fe, Mn, Cd, Cr, Ni, and Pb) in 14 different wild-growing edible mushroom species (Coprinus comatus, Voluariella volvacea, Pleurotus nebrodensis, Hypsizigus marmoreus, Hericium erinaceus, Agrocybe aegerita, Lenfinus edodes, Collybia velutipes, Agaricus bisporus, Russula albida, Clitocybe conglobata, Pleurotus eryngii, Lepista sordida, and Pleurotus ostreatus) collected from Yunnan province, China, were determined by inductively coupled plasma-atomic emission spectrometry after microwave digestion. All element concentrations were determined on a dry weight basis. The ranges of element concentrations for copper, zinc, iron, manganese, cadmium, chromium, nickel, and lead were 6.8-31.9, 42.9-94.3, 67.5-843, 13.5-113, 0.06-0.58, 10.7-42.7, 0.76-5.1, and 0.67-12.9 mg/kg, respectively. In general, iron content was higher than other metals in all mushroom species. The levels of zinc, cadmium, and lead in some edible mushroom samples were found to be higher than legal limits. The relative standard deviations were found below 10%. The accuracy of procedure was confirmed by certified reference material.     

Determination of trace heavy metals in harvested rainwater used for drinking in Hebron (south West Bank,Palestine) by ICP-MS

Rainwater samples harvested for drinking from the west part of Hebron (south of West Bank in Palestine), the largest city in the West Bank, were analyzed for the content of different trace heavy metals (Cr, Mn, Co, Ni, Cu, Zn, Mo, Ag, Cd, Bi, and Pb) by inductively coupled plasma mass spectrometry (ICP-MS). This study was conducted to determine the water quality of harvested rainwater used for drinking of south West Bank (case study, Hebron area). A total of 44 water samples were collected in November 2012 from 44 house cisterns used to collect rainwater from the roofs of houses. The samples were analyzed for their pH, temperature, electrical conductivity, total dissolved solids, and different heavy metal contents. The pH of all water samples was within the US Environmental Protection Agency limits (6.5–8.5), while some water samples were found to exceed the allowed WHO limit for total dissolved solids (TDSs) in drinking water. Results showed that concentrations of the heavy metals vary significantly between the 44 samples. Results also showed that the concentration of five heavy metals (Cr, Mn, Ni, Ag, and Pb) is higher than the WHO limits for these heavy metals in drinking water. Overall, our findings revealed that harvested rainwater used for drinking of this part of south West Bank is contaminated with heavy metals that might affect human health.     

Analysis of elemental concentration using ICP-AES and pathogen indicator in drinking water of Qasim Abad, District Rawalpindi, Pakistan

The present study was conducted to investigate drinking water quality (groundwater) from water samples taken from Qasim Abad, a locality of approximately 5,000 population, situated between twin cities Rawalpindi and Islamabad in Pakistan. The main sources of drinking water in this area are water bores which are dug upto the depth of 250–280 ft in almost every house. The study consists of the determination of physico-chemical properties, trace metals, heavy metals, rare earth elements and microbiological quality of drinking water. The data showed the variation of the investigated parameters in samples as follows: pH 6.75 to 8.70, electrical conductivity 540 to 855 μS/cm, total dissolved solids 325.46 to 515.23 ppm and dissolved oxygen 1.50 to 5.64 mg/L which are within the WHO guidelines for drinking water quality. The water samples were analysed for 30 elements (aluminium, iron, magnesium, manganese, silicon, zinc, molybdenum, titanium, chromium, nickel, tungsten, silver, arsenic, boron, barium, beryllium, cadmium, cobalt, copper, gallium, mercury, lanthanum, niobium, neodymium, lead, selenium, samarium, tin, vanadium and zirconium) by using inductively coupled plasma atomic emission spectroscopy. The organic contamination was detected in terms of most probable number (MPN) of faecal coliforms. Overall, elemental levels were lower than the recommended values but three water bores (B-1, B-6, B-7) had higher values of iron (1.6, 2.206, 0.65 ppm), two water bores (B-1, B-6) had higher values of aluminium (0.95, 1.92 ppm), respectively, and molybdenum was higher by 0.01 ppm only in one water bore (B-11). The total number of coliforms present in water samples was found to be within the prescribed limit of the WHO except for 5 out of 11 bore water samples (B-2, B-3, B-4, B-8, B-11), which were found in the range 5–35 MPN/100 mL, a consequence of infiltration of contaminated water (sewage) through cross connection, leakage points and back siphoning.     

Application of the positive matrix factorization approach to identify heavy metal sources in sediments. A case study on the Mexican Pacific Coast

During the last two decades, sediments collected in different sources of water bodies of the Tehuantepec Basin, located in the southeast of the Mexican Pacific Coast, showed that concentrations of heavy metals may pose a risk to the environment and human health. The extractable organic matter, geoaccumulation index, and enrichment factors were quantified for arsenic, cadmium, copper, chromium, nickel, lead, vanadium, zinc, and the fine-grained sediment fraction. The non-parametric SiZer method was applied to assess the statistical significance of the reconstructed metal variation along time. This inference method appears to be particularly natural and well suited to temperature and other environmental reconstructions. In this approach, a collection of smooth of the reconstructed metal concentrations is considered simultaneously, and inferences about the significance of the metal trends can be made with respect to time. Hence, the database represents a consolidated set of available and validated water and sediment data of an urban industrialized area, which is very useful as case study site. The positive matrix factorization approach was used in identification and source apportionment of the anthropogenic heavy metals in the sediments. Regionally, metals and organic matter are depleted relative to crustal abundance in a range of 45–55 %, while there is an inorganic enrichment from lithogenous/anthropogenic sources of around 40 %. Only extractable organic matter, Pb, As, and Cd can be related with non-crustal sources, suggesting that additional input cannot be explained by local runoff or erosion processes.     

Total concentrations and speciation of heavy metals in soils of the Shenyang Zhangshi Irrigation Area, China

The Shenyang Zhangshi Irrigation Area (SZIA) was used for the spreading of municipal and industrial waste water, which is an economic way of irrigating crops, recycling nutrients and water treatment. Long-term irrigation resulted in a severe metal contamination of soils. To identify the soil phases implicated in retaining the metals, sequential extractions were performed. The most predominant metal was cadmium which was mainly associated with mobile, easily soluble and easily reducible fractions. Copper was mainly associated with the residual, EDTA extractable and moderately reducible fractions. Lead was bound to organic matter and poorly crystalline Fe-oxides. Nickel and zinc were mainly associated with the residual and strongly reducible fractions. Although copper, lead, nickel and zinc concentrations were of minor importance mobile metal concentrations of these metals as well as of cadmium exceeded German trigger values for plant production and plant growth.     

Levels of Heavy Metals in Karelian Wildlife, 1989–91

The levels of mercury, cadmium, lead, copper, nickel, zinc and iron were determined in samples of liver, kidney, skeletal muscle, heart, lungs and hair of moose (N = 67), reindeer (N = 45), brown bear (N = 18), wild boar (N = 10) and squirrel (N = 18) shot in Karelia from 1989 to 1991 during regular hunting. The highest heavy-metal concentrations were found in livers, kidney, lungs and hair samples. The samples of muscle contained lowest levels of these elements. The tissues of moose, reindeer and brown bear were contaminated with heavy metals to a greatest extent. Lowest levels of toxicants were recorded in wild boar. Results indicate a widespread presence of heavy metal in the environment and in wildlife, which may be linked to acid precipitation. There was no evidence of these elements accumulated to toxic levels, but Karelian public have been informed that the eating of moose liver and kidney would probably result in their exceeding WHO standard weekly intake limit for cadmium.     

Water-soluble species and heavy metal contamination of the petroleum refinary area,Jordan

The levels of lead, cadmium, copper, zinc, aluminum, chromium, and iron in street dust, soil, and plants in the Jordanian petroleum refinery were determined using flame and graphite-furnace atomic absorption spectrophotometry. Major cations (Li+, Na+, NH4+, K+, Mg2+, and Ca2+) and anions (F-, Cl-, NO3-, SO4(2-), and Br-) were also determined using suppression mode ion chromatography. Generally, higher levels of the heavy metals studied were found in street dust samples than in soil samples. On the other hand, except Cl-, and Li+ ions, other anions and cations showed higher concentrations in soil than in street dust samples. For plant samples, unwashed samples showed higher levels of heavy metals than their washed counterparts, indicating that dust fall is a source of heavy metal contamination.     

Heavy metals contamination in water and three species of most consumed fish sampled from Caspian Sea, 2011

The present study is an attempt to evaluate the heavy metal contamination in the marine environment of the Caspian Sea of Iran. The concentrations of zinc, chromium, cadmium, and lead were measured in water and dorsal muscle of fish sampled from 10 selected stations along Gorgan coast using atomic absorption spectrophotometry during summer of 2011. The average concentrations of lead in water and fish samples (115.29?±?14.78 and 113.23?±?27.01 μg/L) were significantly higher than that of cadmium and chromium (P?<?0.05). The highest heavy metals content was observed in Cyprinus carpio samples. The heavy metals concentrations in the samples were within the acceptable recommended standards. But, elevating levels of heavy metals in water and fish made a serious concern about ecosystem and food chain contamination. It is recommended that protective authorities should carry out a continual assessment on the levels of pollutants in the sea.     

Antennal Deformities of Chironomid Larvae and Their Use in Biomonitoring of Heavy Metal Pollutants in the River Damodar of West Bengal,India

Analyses of sediment and water indicate the presence of heavy metal pollutants like lead, zinc, copper, mercury and cadmium of the river Damodar of India. These metals are responsible for causing morphological deformities of antennae and other parts of chironomid larvae. Percentage of deformity correlated positively with the concentrations of Pb in water and sediment (r > 0.6) at the confluence point. A new severity index, SISS_(antenna) has been proposed here to assess deformity at the family or subfamily level.