Primary biodegradability of mineral base oils in relation to their chemical and physical characteristics.

The primary biodegradability of 32 mineral base (i.e., unformulated) oils of paraffinic nature was evaluated using the CEC L-33-A-93 test. These oils were refinery products obtained by varying manufacturing processes. Biodegradation percentages ranged between 15% and 75%, i.e., below the commonly accepted standards for environmentally-compatible lubricants. Biodegradability values were compared to the overall chemical composition and main physical properties of base oils. Biodegradability decreased with increasing levels of aromatic and/or polar compounds in the tested oils. For most oils, the biodegradation percentage increased with the viscosity index, but was a decreasing function of the kinematic viscosity (KV), the pour point, the flash point (FP) and the refractive index (RI). Linear relationships between biodegradability and FP or RI values were observed. These results show that, beside chemical features such as the contents in polar and aromatic compounds, simple physical magnitudes such as KV and RI, commonly used to characterize lubricant properties, may be useful parameters for predicting the biodegradability of mineral base oils.     

Biodegradability testing of synthetic ester lubricants--effects of additives and usage

The optimised biodegradability test system "O2/CO2 Headspace Test with GC-TCD" is used for the assessment of synthetic ester lubricants. The effects of both additives and usage on biodegradability are examined and discussed. Ester based cutting fluids and hydraulic fluids with and without additives are used under defined conditions at machine tools and hydraulic and plain bearing test benches. The lubricants are characterised additionally with respect to kinematic viscosity, acidity and elemental composition. Furthermore, a formulated mineral oil is characterised before and after usage at an hydraulic test bench. The results clearly show that the mineral oil is far less biodegradable than the ester oils and that their biodegradability is not affected by usage. Biodegradability of the ester oils is mainly depending on the characteristics of the base fluids and not affected by the additives. Antioxidants are influencing stability respectively biodegradability indirectly, since they prevent oxopolymerisation effects. Other effects of usage on biodegradation are not detected. In this context, the antioxidants ensure ready biodegradability and have a positive effect on the environmental fate of synthetic ester lubricants.     

A correlation between the biodegradability of oil products in the CEC L-33-T-82 and modified Sturm tests

Using a data set for 39 base oils, formulated oil products and pure compounds it was demonstrated that there was a good positive relationship between biodegradation in CEC L-33-T-82 and mineralisation to CO₂ in the modified Sturm test. A mathematical model was developed which described this correlation for most of the materials tested. One outlier from the model was di-iso tridecyl adipate (DITA), the well-degradable calibration oil for the CEC test. The measured mineralisation of DITA was much lower than that predicted by the model based on the compound's high biodegradability in the CEC test. A possible reason for this is given and the implications of this result discussed.     

Lubricants based on renewable resources--an environmentally compatible alternative to mineral oil products

The development of lubricants like, e.g. engine and hydraulic oils was traditionally based on mineral oil as a base fluid. This fact is related to the good technical properties and the reasonable price of mineral oils. The Report to the Club of Rome (W.W. Behrens III, D.H. Meadows, D.I. Meadows, J. Randers, The limits of growth, A Report to the Club of Rome, 1972) and the two oil crises of 1979 and 1983, however, elucidated that mineral oil is on principle a limited resource. In addition, environmental problems associated with the production and use of chemicals and the limited capacity of nature to tolerate pollution became obvious (G.H. Brundtland, et al., in: Hauff, Volker (Ed.), World Commission on Environment and Development (WCED), Report of the Brundtland-Commission, Oxford, UK, 1987), and the critical discussion included besides acid rain, smog, heavy metals, and pesticides also mineral oil (especially oil spills like the case Exxon Valdes). A disadvantage of mineral oil is its poor biodegradability and thus its potential for long-term pollution of the environment. From the early development of lubricants for special applications (e.g. turbojet engine oils) it was known, that fatty acid polyol esters have comparable or even better technical properties than mineral oil. Subsequently, innumerable synthetic esters have been synthesized by systematic variation of the fatty acid and the alcohol components. Whereas the alcohol moiety of the synthetic esters are usually of petrochemical origin, the fatty acids are almost exclusively based on renewable resources. The physico-chemical properties of oleochemical esters can cover the complete spectrum of technical requirements for the development of high-performance industrial oils and lubricants (e.g. excellent lubricating properties, good heat stability, high viscosity index, low volatility and superior shear stability). For a comprehensive review of their technical properties see F. Bongardt, in: Jahrbuchfür Praktiker, H. Ziolkowsky (Ed.), Verlag für chemische Industrie GmbH, 1996, pp. 348-361. This article will focus on the ecological properties of oleochemical (synthetic) esters. The environmental relevance of oleochemicals in comparison to petrochemicals is discussed, and then the principles of an ecological assessment are described. The ecotoxicological properties and the biodegradability of oleochemical esters are presented. Finally, the ecological properties of the oleochemical esters are discussed with regard to existing environmental classification and labeling systems.     

Occurrence and ecological hazard assessment of selected veterinary medicines in livestock wastewater treatment plants

The occurrence of some veterinary medicines in the livestock wastewater plants (WWTPs) was investigated. This investigation represented the occurrence of veterinary medicines to treat in the livestock WWTPs or be discharged into the water system in Korea since the sampling sites were widely distributed across the nation and samples were collected from the 11 livestock WWTPs. Nine antibiotics, two analgesics, and two disinfectants occurred in the livestock wastewater plants (WWTPs). From 11 livestock WWTP influents, chlortetracycline, oxytetracycline, acetylsalicylic acid, and disinfectants frequently occurred with the high concentrations. Meanwhile, sulfamethoxazole, erythromycin-H₂O, and trimethoprim did not occur during sampling periods. The values for log Kow of each chemical showed a high correlation with the number of hydrogen bonding acceptors and were important parameters to estimate and understand the biodegradability and toxicity of a compound in the environment. The biodegradability of each compound was proportional to the hydrophilicity of each compound and the toxicity was proportional to the number of hydrogen bonding acceptors of each compound. The expected introductory concentration (EIC), predicted exposure concentration (PEC), and hazard quotient showed that the livestock WWTP effluents were hazardous to ecosystems.     

Kinetic study of the anaerobic biodegradation of alkyl polyglucosides and the influence of their structural parameters

This paper reports a study of the anaerobic biodegradation of non-ionic surfactants alkyl polyglucosides applying the method by measurement of the biogas production in digested sludge. Three alkyl polyglucosides with different length alkyl chain and degree of polymerization of the glucose units were tested. The influence of their structural parameters was evaluated, and the characteristics parameters of the anaerobic biodegradation were determined. Results show that alkyl polyglucosides, at the standard initial concentration of 100 mgC L^?1, are not completely biodegradable in anaerobic conditions because they inhibit the biogas production. The alkyl polyglucoside having the shortest alkyl chain showed the fastest biodegradability and reached the higher percentage of final mineralization. The anaerobic process was well adjusted to a pseudo first-order equation using the carbon produced as gas during the test; also, kinetics parameters and a global rate constant for all the involved metabolic process were determined. This modeling is helpful to evaluate the biodegradation or the persistence of alkyl polyglucosides under anaerobic conditions in the environment and in the wastewater treatment.     

汽车电泳磷化废水的特点及处理

汽车工业电泳磷化废水成分复杂、COD值高、可生化性差。聚合氯化铝 (PAC)对乳化油珠的电中和破乳及其凝絮对高分子有机物的吸附起主要作用 ;选择阳离子高分子絮凝剂 ,由于其水解产物带有正电荷铵盐基团 ,加强了残存COD的吸附 ,完善了絮凝分离过程。选用恰当的混凝剂和设计合理的工艺流程 ,采用以混凝为基础的物理化学方法 ,可以进行有效的处理。     

Production of a refined biooil derived by fast pyrolysis of chicken manure with chemical and physical characteristics close to those of fossil fuels

The chemical and physical properties of raw biooils prevent their direct use in combustion engines. We processed raw pyrolytic biooil derived from chicken manure to yield a colorless refined biooil with diesel qualities. Chemical characterization of the refined biooil involved elemental and several spectroscopic analyses. The physical measurements employed were viscosity, density and heat of combustion. The elemental composition (% wt/wt) of the refined biooil was 82.7 % C, 15.3 % H, 0.2 % N and 1.8 % O, no S. Its viscosity was 0.006 Pa.s and a heat of combustion of 43 MJ kg(-1). The refined biooil fraction contains n-alkanes, ranging from n-C(14) to n-C(27), alkenes varying from C(10:1) to C(22:1), and long-chain alcohols. The refined biooil makes a good diesel fuel due to its chemical and physical properties.     

Modelling of dissolved oxygen content using artificial neural networks: Danube River, North Serbia, case study

The aims of this study are to create an artificial neural network (ANN) model using non-specific water quality parameters and to examine the accuracy of three different ANN architectures: General Regression Neural Network (GRNN), Backpropagation Neural Network (BPNN) and Recurrent Neural Network (RNN), for prediction of dissolved oxygen (DO) concentration in the Danube River. The neural network model has been developed using measured data collected from the Bezdan monitoring station on the Danube River. The input variables used for the ANN model are water flow, temperature, pH and electrical conductivity. The model was trained and validated using available data from 2004 to 2008 and tested using the data from 2009. The order of performance for the created architectures based on their comparison with the test data is RNN > GRNN > BPNN. The ANN results are compared with multiple linear regression (MLR) model using multiple statistical indicators. The comparison of the RNN model with the MLR model indicates that the RNN model performs much better, since all predictions of the RNN model for the test data were within the error of less than ±10 %. In case of the MLR, only 55 % of predictions were within the error of less than ±10 %. The developed RNN model can be used as a tool for the prediction of DO in river waters.     

An automated test for measuring polymer biodegradation

The biodegradability of polymer materials as evaluated by the modified Sturm test is labor-intensive, cumbersome and costly and also tends to cumulate errors. An automated system for the measurement of carbon dioxide would overcome many of these disadvantages. We describe here a method in which CO2 was determined by IR spectroscopy. We compared the results with those from trapping CO2 in a solution of barium hydroxide (Ba(OH)2) followed by manual titration. The automated system was more reproducible, less costly and more compact. The automated system could also be employed to measure the biodegradability of other substances such as oils and detergents.     

Mixtures of quaternary ammonium compounds and anionic organic compounds in the aquatic environment: Elimination and biodegradability in the closed bottle test monitored by LC-MS/MS

Quaternary ammonium compounds (QACs) are widely used as disinfectants, detergents and fabric softeners. Anionic detergents are one of the most widely used chemical substances. QACs and anionic surfactants can form ionic pairs. In the present study we investigated the biodegradability of QACs in the presence of different anionic surfactants. The biodegradability of three QACs, namely benzalkonium chloride (BAC), didecyldimethylammonium chloride (DDMAC) and ethacridine lactate (EL), when applied as single substances and in combination with anionic surfactants such as benzene sulfonic acid (BSA), LAS, naphthalene sulfonic acid (NSA) and sodium dodecylsulfonate (SDS) was studied applying the closed bottle test (CBT) [OECD 301D, 1992. Guidelines for Testing of Chemicals. Closed bottle test. Organisation of Economic Cooperation and Development, Paris] at a ratio of 1:1 (mol:mol). Biodegradation was monitored by measuring oxygen concentration in the test vessels with an oxygen electrode in accordance with international standard methods [ISO 5414, 1990. Water quality - determination of dissolved oxygen. In: German Standard Methods for the Examination of Water, Wastewater and Sludge. VCH Verlagsgesellschaft, Weinheim, New York, Basel Cambridge]. Primary elimination of the QACs and of LAS was monitored by LC-MS/MS. There was little biodegradability of the QACs as either single compounds or in the presence of organic counter ions. The biodegradability of the organic counter ions was lower in the presence of QACs as compared to the single substances. Primary elimination of the QACs by sorption took place.     

Bacillus thuringiensis fermentation of hydrolyzed sludge--rheology and formulation studies

Rheology of Bacillus thuringiensis fermentation of hydrolyzed sludge was investigated in bench scale fermenter. Stable liquid formulations were developed and optimized for two-year based studies comprising various physical/chemical (viscosity, particle size, corrosion and suspendibility) and biological (microbial contamination, viable spores and entomotoxicity) parameters at different pHs and temperatures. The hydrolyzed sludge depicted non-Newtonian and pseudoplastic behaviour during fermentation with 90% to 96% confidence of fits into Casson, Power and IPC paste models. Higher values of consistency and flow index during exponential growth and stationary phase, respectively, affected downstream processing. The power law was also followed by stable formulations. Sorbitol, sodium monophosphate and sodium metabisulfite (2.2:1:1) as suspending agents produced suspendibility ranging from 69% to 94%. The stable formulation (FH-4) comprising sorbitol, sodium monophosphate and sodium metabisulfite deteriorated at pHs 6, 6.5 and temperatures, 40 and 50 degrees C, with no signs of corrosion and microbial contamination. The viscosity of FH-4 formulations decreased with shear rate which could improve handling and consequent spraying.     

A new bioseed for determination of wastewater biodegradability: analysis of the experimental procedure

A new bioassay proposed in the patent P201300029 was applied to a pre-treated wastewater containing a mixture of commercial pesticides to simulate a recalcitrant industrial wastewater in order to determine its biodegradability. The test uses a mixture of standardized inoculum of the lyophilized bacteria Pseudomonas putida with the proper proportion of salts and minerals. The results highlight that biodegradation efficiency can be calculated using a gross parameter (chemical oxygen demand (COD)) which facilitates the biodegradability determination for routine water biodegradability analysis. The same trend was observed throughout the assay with the dehydrated and fresh inoculums, and only a difference of 5 % in biodegradation efficiency (E _f) was observed. The obtained results showed that the P. putida biodegradability assay can be used as a commercial test with a lyophilized inoculum in order to monitor the ready biodegradability of an organic pollutant or a WWTP influent. Moreover, a combination of the BOD₅/COD ratio and the P. putida biodegradability test is an attractive alternative in order to evaluate the biodegradability enhancement in water pre-treated with advanced oxidation processes (AOPs).     

Treatment of pharmaceutical wastewater containing antibiotics by O3 and O3/H2O2 processes

Ozonation of three different synthetic pharmaceutical formulation wastewater containing two human antibiotics and a veterinary antibiotic has been studied to enhance the their biodegradability. The effects of pH and initial chemical oxygen demand (COD) value as well as addition of hydrogen peroxide on ozonation process were investigated. Total organic carbon (TOC), COD, biochemical oxygen demand (BOD), and aromatic content (UV254) were the parameters followed to evaluate the performance of ozonation process. Comparison of the biodegradability of selected wastewaters containing different antibiotics confirmed that the variation of biodegradability was associated with the target compound. While BOD5/COD ratio of veterinary antibiotic formulation wastewater was increased from 0.077 to 0.38 with an applied ozone dosage of 2.96 g/l, this ratio for human antibiotic I and human antibiotic II was increased from 0 to 0.1 and 0.27 respectively. Moreover the results of this investigation showed that the ozonation process is capable of achieving high levels of COD and aromaticity removals at about their natural pH values.     

石灰干化污泥对土壤重金属稳定化处理的效果

以采自湖南省嘉禾县重金属复合污染土壤为研究对象,采用城市污水处理石灰干化污泥作为稳定剂,对污染土壤进行稳定化处理,并采用TCLP和BCR连续提取法对稳定化效果进行分析和评价。研究结果表明,单独使用石灰干化污泥,TCLP浸出浓度随着干化污泥质量分数的增加而显著减少,干化污泥的质量分数为40%时,稳定化率最大为Zn-98.92%、Cd-99.06%、Pb-96.84%;但是干化污泥的高pH值导致稳定后土壤中As的浸出增加。为了恢复植物生长功能,经过亚铁盐和磷酸调节pH后,石灰干化污泥稳定过的土壤pH有效降低,同时亚铁盐和磷酸有利于促进Pb和Zn的稳定效果;但是对Cd的稳定有负面影响;另外,亚铁盐的加入同时可以减少As的浸出浓度。经处理后土壤中重金属形态由不稳定态转为稳定态,使重金属的浸出浓度明显降低,减少了土壤重金属的浸出毒性。该研究结果表明,石灰干化污泥可以作为资源回收利用,应用于重金属污染土壤的修复中,并能改善稳定后土壤适宜植物生长的理化性质。     

Production of a refined biooil derived by fast pyrolysis of chicken manure with chemical and physical characteristics close to those of fossil fuels

The chemical and physical properties of raw biooils prevent their direct use in combustion engines. We processed raw pyrolytic biooil derived from chicken manure to yield a colorless refined biooil with diesel qualities. Chemical characterization of the refined biooil involved elemental and several spectroscopic analyses. The physical measurements employed were viscosity, density and heat of combustion. The elemental composition (% wt/wt) of the refined biooil was 82.7 % C, 15.3 % H, 0.2 % N and 1.8 % O, no S. Its viscosity was 0.006 Pa.s and a heat of combustion of 43 MJ kg^?1. The refined biooil fraction contains n-alkanes, ranging from n-C₁₄ to n-C₂₇, alkenes varying from C_10:1 to C_22:1, and long-chain alcohols. The refined biooil makes a good diesel fuel due to its chemical and physical properties.     

Application of the headspace CO2 method (ISO 14 593) to the assessment of the ultimate biodegradability of surfactants: results of a calibration exercise

In the recent review of the control of marketing surfactants used in detergents, the EU decided to increase the severity of the testing procedure by using the criterion of ultimate biodegradability (mineralization) rather than primary biodegradation (removal of the parent molecule) to ensure that possible harmful organic metabolites do not reach the environment. The relatively new ISO headspace CO2 test, considered to be an improvement on the OECD 301B (Sturm CO2) test was chosen. The method was subjected to a ring test by 11 laboratories using one of each of four classes of surfactants plus a poorly degradable reference surfactant; all laboratories satisfactorily applied the method. The necessary addition of silica gel to the medium containing the cationic surfactant, known as a class to be more inhibitory than other classes, was confirmed as a technique for avoiding inhibition of the inoculum. The biodegradability of the surfactants was in general agreement with results reported in the literature and the often reported variable values of % inorganic carbon (IC) produced of the theoretical was found. The anionic and cationic surfactants were readily biodegradable (%IC > 60), the non-ionic surfactant was well below the pass value, while the amphoteric was borderline. The IC production by the blank controls, one of the validity criteria, was about 0.3 mg C/100 ml test medium, equivalent to 3 mg C/l, as recommended in the ISO text. Mild conditions of pre-exposure of the inoculum to the test surfactant did not produce consistent worthwhile effects on either the percentage biodegradation or on its variability.