Quantal response of Paleomonetes africanus in locally formulated drilling mud lubricants

The toxic potency of three locally formulated drilling mud lubricants against Paleomonetes africanus, a brackish water crustacean commonly found in the oil producing Niger Delta (Nigeria), was evaluated. A 96?h exposure to quantal (lethal) doses of the mud lubricants gave LC₅₀ (median lethal concentration) of 350, 620 and 210?mg?L^?1, respectively. The mud lubricant with the highest molecular weight of 40,000?g?mol^?1 (lubricant 2) had the least toxicity on the organisms, attributable to the reduced rate of diffusion into the vital cells of the test organism. The higher toxicity of lubricant 3 over lubricant 1, despite its higher molecular weight, might be as a result of its higher acid value of 21.60?mg?KOH?g^?1. The results show that the test lubricants would be environmentally friendly within the baseline concentrations and lethal times (LT₅₀) measured.     

Low levels of toxic elements in Dead Sea black mud and mud-derived cosmetic products

Natural muds used as or in cosmetics may expose consumers to toxic metals and elements via absorption through the skin, inhalation of the dried product, or ingestion (by children). Despite the extensive therapeutic and cosmetic use of the Dead Sea muds, there apparently has been no assessment of the levels of such toxic elements as Pb, As, or Cd in the mud and mud-based products. Inductively coupled plasma mass spectrometry analysis of eight toxic elements in samples collected from three black mud deposits (Lisan Marl, Pleistocene age) on the eastern shore of the Dead Sea in Jordan revealed no special enrichment of toxic elements in the mud. A similar analysis of 16 different commercial Dead Sea mud cosmetics, including packaged mud, likewise revealed no toxic elements at elevated levels of concern. From a toxic element standpoint, the Dead Sea black muds and derivative products appear to be safe for the consumer. Whatever the therapeutic benefits of the mud, our comparison of the elemental fingerprints of the consumer products with those of the field samples revealed one disturbing aspect: Dead Sea black mud should not be a significant component of such items as hand creams, body lotions, shampoo, and moisturizer.     

Origin and Distribution of Suspended Organic Matter As Inferred From Carbon Isotope Composition in A Mediterranean Semi-Enclosed Marine System

Abstract

The origin and distribution of suspended organic matter, the trophic features and the stable carbon isotopic composition of particulate organic carbon (POC) were studied monthly in a Western Mediterranean semi-enclosed basin. Sampling stations were selected as a function of wind-exposure and the degree of vegetation cover and then compared with an adjacent unvegetated site. the predominant vegetation was seagrass (Posidonia oceanica and Cymodocea nodosa) and Caulerpa prolifera. Water samples were analyzed for total suspended matter (inorganic and organic fractions), photosynthetic pigments (chlorophyll-a and phaeopigments), dissolved organic carbon, particulate organic carbon and their isotopic composition. Temperature and salinity were also measured at the same sampling sites within range of Mediterranean limits. the suspended organic matter concentration was 1.77 ± 1.55 mg l^?1; the chlorophyll-a concentration was low (0.35 ± 0.24 μg l^?1); the disolved organic carbon concentration was 2,140 ± 2,010 μg l^?1; the particulate organic carbon concentration was 212 ± 106 μg l^?1 and the isotopic composition was 18.77 ± 2.51%_°. There were significant temporal differences except for phaeopigments, POC and its POC isotopic composition, and there were no spatial differences other than for δ¹³C. This picture highlighted a general seasonal trend and trophical features similar to adjacent sea.

Spatial differences in δ¹³C showed that the source of suspended organic matter was different between stations as that between sources and wind-hydrodynamic constraints. In     

Characterization of indoor dust from Brazil and evaluation of the cytotoxicity in A549 lung cells

Over the past decade, ambient air particulate matter (PM) has been clearly associated with adverse health effects. In Brazil, small and poor communities are exposed to indoor dust derived from both natural sources, identified as blowing soil dust, and anthropogenic particles from mining activities. This study investigates the physicochemical and mineralogical composition of indoor PM₁₀ dust samples collected in Minas Gerais, Brazil, and evaluates its cytotoxicity and inflammatory potential. The mean PM₁₀ mass concentration was 206 μg/m³. The high dust concentration in the interior of the residences is strongly related to blowing soil dust. The chemical and mineralogical compositions were determined by ICP-OES and XRD, and the most prominent minerals were clays, Fe-oxide, quartz, feldspars, Al(hydr)oxides, zeolites, and anatase, containing the transition metals Fe, Cr, V, Ni, Cu, Zn, Ti, and Mn as well as the metalloid As. The indoor dust samples presented a low water solubility of about 6 %. In vitro experiments were carried out with human lung alveolar carcinoma cells (A549) to study the toxicological effects. The influence of the PM₁₀ dust samples on cell viability, intracellular formation of reactive oxygen species (ROS), and release of the pro-inflammatory cytokine IL-8 was analysed. The indoor dust showed little effects on alamarBlue reduction indicating unaltered mitochondrial activity. However, significant cell membrane damage, ROS production, and IL-8 release were detected in dependence of dose and time. This study will support the implementation of mitigation actions in the investigated area in Brazil.     

Concentrations of lead in cosmetics commonly used in South Africa

In this study, we present evidence of lead in lip liner, oil absorbent powder, mascara, concealer, lipsticks, lip gloss, and foundation. The samples were analyzed for lead by flame atomic absorption spectrometry. The levels of lead in concealer, mascara, lip liner, and oil absorbent powder were found to be 7.4?±?1.3?µg?g^?1, 15.8?±?0.2?µg?g^?1, 29.0?±?9.2?µg?g^?1, and 17.3?±?2.9?µg?g^?1, respectively. The levels of lead in lipsticks, lip gloss, and foundation ranged from not detected to 73.1?±?5.2?µg?g^?1, 4.7 to 11.7?±?2.8?µg?g^?1, and 7.8 to 32.9?±?1.4?µg?g^?1, respectively. Thus, in the majority of samples, the concentrations of lead are higher than the USFDA maximum permissible concentration of 0.10?µg?g^?1 in candy and cosmetics. In lipsticks alone, only 25% of 40 samples were found to meet the requirement. Therefore, continuous use of cosmetic products in which lead concentration exceeds the maximum permissible level may pose a health hazard for the female population of South Africa in the long run.     

The pollution characteristics of PM<Subscript>2.5</Subscript> and correlation analysis with meteorological parameters in Xinxiang during the Shanghai Cooperation Organization Prime Ministers’ Meeting

The pollution characteristics of PM_2.5 and correlation analysis with meteorological parameters in Xinxiang during the Shanghai Cooperation Organization Prime Ministers’ Meeting were investigated. During the whole meeting, nine PM_2.5 samples were collected at a suburban site of Xinxiang, and the average concentration of PM_2.5 was 122.28 μg m^?3. NO₃ ^?, NH₄ ⁺, SO₄ ^2? accounted for 56.8% of the total water-soluble ions. In addition, with an exception of Cl^?, all of water-soluble ions decreased during the meeting. Total concentrations of crustal elements ranged from 6.53 to 185.86 μg m^?3, with an average concentration of 52.51 μg m^?3, which accounted for 82.5% of total elements. The concentrations of organic carbon and elemental carbon were 7.71 and 1.52 μg m^?3, respectively, lower than those before and after the meeting. It is indicated that during the meeting, limiting motor vehicles is to reduce exhaust emissions, delay heating is to reduce the fossil fuel combustion, and other measures are to reduce the concentration of PM_2.5. The directly dispersing by mixing layerheight increase and the indirectly reducing the formation of secondary aerosol by low relative humidity, andthese are the only two key removing mechanisms of PM_2.5 in Xinxiang during the meeting.     

Geochemistry and quality of groundwater of the Yarmouk basin aquifer,north Jordan

Quality of groundwater in the Yarmouk basin, Jordan has been assessed through the study of hydrogeochemical characteristics and the water chemistry as it is considered the main source for drinking and agriculture activities in the region. The results of the relationship between Ca²⁺ + Mg²⁺ versus HCO₃^? + CO₃^2?, Ca²⁺ + Mg²⁺ versus total cations, Na⁺ + K⁺ versus total cations, Cl^? + SO₄^2? versus Na⁺ + K⁺, Na⁺ versus Cl^?, Na⁺ versus HCO₃^? + CO₃^2?, Na⁺ versus Ca²⁺, and Na⁺: Cl^? versus EC describe the mineral dissolution mechanism through the strong relationship between water with rocks in alkaline conditions with the release of Ca²⁺, Mg²⁺, Na⁺, K⁺, HCO₃^?, CO₃^2?, SO₄^2?, and F^? ions in the groundwater for enrichment. Furthermore, evaporation processes, groundwater depletion, and ion exchange contribute to the increased concentration of Na⁺ and Cl^? ions in groundwater. Anthropogenic sources are one of the main reasons for contamination of groundwater in the study area and for increasing the concentration of Mg²⁺, Na⁺, Cl^?, SO₄^2?, and NO₃^? ions. Results show the quality of groundwater in the study area is categorized as follows: HCO₃^? + CO₃^2? > Cl^? > SO₄^2? > NO₃^? > F^? and Na⁺ > Ca²⁺ > Mg²⁺ > K⁺. In conclusion, the results of TDS, TH, and chemical composition showed that 26% of the groundwater samples were unsuitable for drinking. About 28% of groundwater samples in the study area have a high concentration of Mg²⁺, Na⁺, and NO₃^? above the acceptable limit. Also, based on high SAR, 10% of the groundwater samples were not suitable for irrigation purposes.     

Analysis of polymeric quaternary ammonium salts as found in cosmetics by metachromatic polyelectrolyte titration

Metachromatic polyelectrolyte titration was investigated as a means of analyzing polymeric quaternary ammonium salts (polyquaterniums) of relatively low charge density used as ingredients in cosmetics. They are of possible toxicological concern, but little is known of their environmental fate and behavior. With o-toluidine blue as the indicator, determination of the concentration of a range of polyquaterniums of commercial importance and cosmetic origin was possible. Using a visual endpoint, normalities as low as 3 × 10^?5 N could be determined, while with a spectrophotometric endpoint, the technique was effective to approximately 3 × 10^?6 N. The concentrations (g L^?1) to which these normalities correspond depend on the charge density of the polymer. Polyquaterniums are frequently used in association with anionic surfactants in cosmetic formulations and the presence of an anionic surfactant even in excess did not affect results although the color change was less stable. Titration in the presence of prepared humic acid was also possible.     

Thermal treatment of plasma-synthesized goethite improves Fenton-like degradation of orange II dye

Various iron oxides are used for Fenton reactions to degrade organic pollutants. The degradation efficiency may be improved by transforming an iron oxide phase to another. Here, we report on the transformation of goethite into hematite by thermal treatment at 400 °C. The products were analyzed by X-ray diffractometry, Raman spectroscopy, scanning electron microscopy and N₂-physisorption. The catalytic activities were measured for orange II bleaching at initial concentration of 25 mg L^?1, pH 3, catalyst concentration of 0.2 g L^?1; 5 mM H₂O₂, 30 °C. Results show that the synthesized goethite was successfully transformed into hematite, and the specific surface area of the material increased from 134 to 163 m² g^?1. The bleaching efficiency of the orange II dye reached 100 % for the hematite product, versus 78 % for goethite. Therefore, a moderate thermal treatment of a plasma-synthesized goethite improves the catalytic oxidation of organic pollutants.     

Fast and complete removal of the 5-fluorouracil drug from water by electro-Fenton oxidation

Cytostatic drugs are a troublesome class of emerging pollutants in water owing to their potential effects on DNA. Here we studied the removal of 5-fluorouracil from water using the electro-Fenton process. Galvanostatic electrolyses were performed with an undivided laboratory-scale cell equipped with a boron-doped diamond anode and a carbon felt cathode. Results show that the fastest degradation and almost complete mineralization was obtained at a Fe²⁺ catalyst concentration of 0.2 mM. The absolute rate constant for oxidation of 5-fluorouracil by hydroxyl radicals was 1.52 × 10⁹ M^?1 s^?1. Oxalic and acetic acids were initially formed as main short-chain aliphatic by-products, then were completely degraded. After 6 h the final solution mainly contained inorganic ions (NH₄ ⁺, NO₃ ^? and F^?) and less than 10% of residual organic carbon. Hence, electro-Fenton constitutes an interesting alternative to degrade biorefractory drugs.     

Diffusive boundary layers and photosynthesis of the epilithic algal community of coral reefs

The effects of mass transfer resistance due to the presence of a diffusive boundary layer on the photosynthesis of the epilithic algal community (EAC) of a coral reef were studied. Photosynthesis and respiration of the EAC of dead coral surfaces were investigated for samples from two locations: the Gulf of Aqaba, Eilat (Israel), and One Tree Reef on the Great Barrier Reef (Australia). Microsensors were used to measure O₂ and pH at the EAC surface and above. Oxygen profiles in the light and dark indicated a diffusive boundary layer (DBL) thickness of 180–590 μm under moderate flow (~0.08 m s^?1) and >2,000 μm under quasi-stagnant conditions. Under light saturation the oxygen concentration at the EAC surface rose within a few minutes to 200–550% air saturation levels under moderate flow and to 600–700% under quasi-stagnant conditions. High maximal rates of net photosynthesis of 8–25 mmol O₂ m^?2 h^?1 were calculated from measured O₂ concentration gradients, and dark respiration was 1.3–3.3 mmol O₂ m^?2 h^?1. From light–dark shifts, the maximal rates of gross photosynthesis at the EAC surface were calculated to be 16.5 nmol O₂ cm^?3 s^?1. Irradiance at the onset of saturation of photosynthesis, E _k, was <100 µmol photons m^?2 s^?1, indicating that the EAC is a shade-adapted community. The pH increased from 8.2 in the bulk seawater to 8.9 at the EAC surface, suggesting that very little carbon in the form of CO₂ occurs at the EAC surface. Thus the major source of dissolved inorganic carbon (DIC) must be in the form of HCO₃ ^?. Estimates of DIC fluxes across the DBL indicate that, throughout most of the daytime under in situ conditions, DIC is likely to be a major limiting factor for photosynthesis and therefore also for primary production and growth of the EAC.     

Arsenic speciation in polychaetes (Annelida) and sediments from the intertidal mudflat of Sundarban mangrove wetland, India

This paper documents the concentration of total arsenic and individual arsenic species in four soft-bottom benthic polychaetes (Perenereis cultifera, Ganganereis sootai, Lumbrinereis notocirrata and Dendronereis arborifera) along with host sediments from Sundarban mangrove wetland, India. An additional six sites were considered exclusively for surface sediments for this purpose. Polychaetes were collected along with the host sediments and measured for their total arsenic content using inductively coupled plasma mass spectrometry. Arsenic concentrations in polychaete body tissues varied greatly, suggesting species-specific characteristics and inherent peculiarities in arsenic metabolism. Arsenic was generally present in polychaetes as arsenate (As^V ranges from 0.16 to 0.50 mg kg^?1) or arsenite (As^III ranges from 0.10 to 0.41 mg kg^?1) (30–53 % as inorganic As) and dimethylarsinic acid (DMA^V <1–25 %). Arsenobetaine (AB < 16 %), and PO₄-arsenoriboside (8–48 %) were also detected as minor constituents, whilst monomethylarsonic acid (MA^V) was not detected in any of the polychaetes. The highest total As (14.7 mg kg^?1 dry wt) was observed in the polychaete D. arborifera collected from the vicinity of a sewage outfall in which the majority of As was present as an uncharacterised compound (10.3 mg kg^?1 dry wt) eluted prior to AB. Host sediments ranged from 2.5 to 10.4 mg kg^?1 of total As. This work supports the importance of speciation analysis of As, because of the ubiquitous occurrence of this metalloid in the environment, and its variable toxicity depending on chemical form. It is also the first work to report the composition of As species in polychaetes from the Indian Sundarban wetlands.     

Ocean acidification and warming alter photosynthesis and calcification of the symbiont-bearing foraminifera Marginopora vertebralis

The impact of elevated CO₂ and temperature on photosynthesis and calcification in the symbiont-bearing benthic foraminifer Marginopora vertebralis was studied. Individual specimens of M. vertebralis were collected from Heron Island on the southern Great Barrier Reef (Australia). They were maintained for 5 weeks at different temperatures (28, 32 °C) and pCO₂ (400, 1,000 µatm) levels spanning a range of current and future climate-change scenarios. The photosynthetic capacity of M. vertebralis was measured with O₂ microsensors and a pulse-amplitude-modulated chlorophyll (Chl) fluorometer, in combination with estimates of Chl a and Chl c ₂ concentrations and calcification rates. After 5 weeks, control specimens remained unaltered for all parameters. Chlorophyll a concentrations significantly decreased in the specimens at 1,000 µatm CO₂ for both temperatures, while no change in Chl c ₂ concentration was observed. Photoinhibition was observed under elevated CO₂ and temperature, with a 70–80 % decrease in the maximum quantum yield of PSII. There was no net O₂ production at elevated temperatures in both CO₂ treatments as compared to the control temperature, supporting that temperature has more impact on photosynthesis and O₂ flux than changes in ambient CO₂. Photosynthetic pigment loss and a decrease in photochemical efficiency are thus likely to occur with increased temperature. The elevated CO₂ and high temperature treatment also lead to a reduction in calcification rate (from +0.1 to >?0.1 % day^?1). Thus, both calcification and photosynthesis of the major sediment-producing foraminifer M. vertebralis appears highly vulnerable to elevated temperature and ocean acidification scenarios predicted in climate-change models.     

Lead and copper in the sclerotium of the mushroom Pleurotus tuber-regium (Osu): assessment of contribution to dietary intake in southeastern Nigeria

The concentrations of lead and copper in sclerotium of the mushroom Pleurotus tuber-regium widely consumed in Southeastern Nigeria were determined. The specimens purchased from different markets were mineralized with H₂SO₄ and H₂O₂ and analyzed using flame atomic absorption spectrophotometer. The concentrations of Pb ranged from 0.2?±?0.1?mg?kg^?1 to 0.8?±?0.5?mg?kg^?1 with approximately 91% of the results being below 1?mg?kg^?1. The concentrations of Cu ranged from 0.5?±?0.2?mg?kg^?1 to 1.2?±?0.6?mg?kg^?1 with 78% of the results below 1?mg?kg^?1. The results were compared with the literature and levels set by regulatory authorities, with the conclusion that the consumption of sclerotium does not pose a toxicological risk. The low Pb content of the studied products would contribute to only about 1% of the provisional tolerable weekly intake of Pb. The Cu contents would contribute to nutritional intake of the metal in the general population. It is recommended that the outer layers of the sclerotia be properly scrapped before use to reduce metal contamination from exogenous sources.     

Seasonal variations in physicochemical characteristics and cyanobacterial diversity of a lake in Northern India

Physicochemical analyses and cyanobacterial diversity of Ramgarh Lake water were performed at five sampling sites during winter, summer, and monsoon seasons. Higher load of solids, carbon, and nutrients were persistent throughout the analysis that indicates the conversion of lake from oligotrophic to eutrophic nature. High nutrients load enhanced cyanobacterial biomass, while low nutrients load produced relatively less biomass. The physicochemical parameters of water samples revealed minimum 2.9 mg L^?1 dissolved oxygen (DO) at site-1 during summer, while maximum (5.6 mg L^?1) at site-4 in monsoon season. Maximum biochemical oxygen demand (BOD) (40 mg L^?1) and chemical oxygen demand (COD) (126 mg L^?1) were recorded at site-1 during summer, whereas minimum BOD (18 mg L^?1) and COD (52 mg L^?1) were evident at site-3 in monsoon season. Minimum concentration of nitrate (0.72 mg L^?1) was recorded at site-3 in summer, whereas maximum 2.7 mg L^?1 was present at site-5 in winter season. The phosphate concentration was maximum (0.52 mg L^?1) at site-5 in summer, and minimum (0.18 mg L^?1) was observed at site-4 in monsoon season. Cyanobacterial diversity was higher during all the seasons, and dominated by the species of Microcystis at all the five sampling sites.     

Speciation of mercury in South African coals

Total mercury (Hg_TOT) concentrations were determined by inductively coupled plasma mass spectrometry (ICP MS) for South African Highveld coals. The distribution of Hg in coals was investigated using a four-stage sequential leaching protocol and isotope dilution/gas chromatography coupled to ICP MS (ID-GC-ICP MS). The results show that Hg_TOT ranged from 144 to 303?µg?kg^?1 with a mean of 199?±?26?µg?kg^?1, while Hg_TOT leached from coals using different solvents ranged between 103 and 310?µg?kg^?1 (mean: 218?±?60?µg?kg^?1). Hg leaching rates of 53–78% were achieved in crushed coals. Hg⁰, Hg²⁺, and CH₃Hg⁺ were identified in all coals. CH₃Hg⁺ in studied coals ranged between 0.1 and 0.4 (mean: 0.2) µg?kg^?1. GC ICP MS chromatograms also showed unknown Hg peaks which were identified as other organomercury species such as ethylmercury. Modes of occurrence of Hg in coals were variable with the organic-bound (37–40%) and the sulfide-bound (37–39%) being the dominant mercury forms. Increasing the HCl concentration in the used protocol increased the amount of Hg leached (16%) during this step.     

Environmental impact of CO<Subscript>2</Subscript>, Rn,Hg degassing from the rupture zones produced by Wenchuan <Emphasis Type="Italic">M</Emphasis><Subscript>s</Subscript> 8.0 earthquake in western Sichuan,China

The concentrations and flux of CO₂, ²²²Radon (Rn), and gaseous elemental mercury (Hg) in soil gas were investigated based on the field measurements in June 2010 at ten sites along the seismic rupture zones produced by the May 12, 2008, Wenchuan M _s 8.0 earthquake in order to assess the environmental impact of degassing of CO₂, Rn and Hg. Soil gas concentrations of 344 sampling points were obtained. Seventy measurements of CO₂, Rn and Hg flux by the static accumulation chamber method were performed. The results of risk assessment of CO₂, Rn and Hg concentration in soil gas showed that (1) the concentration of CO₂ in the epicenter of Wenchuan M _s 8.0 earthquake and north end of seismic ruptures had low risk of asphyxia; (2) the concentrations of Rn in the north segment of seismic ruptures had high levels of radon, Maximum was up to level 4, according to Chinese code (GB 50325-2001); (3) the average geoaccumulation index I _geo of soil Hg denoted the lack of soil contamination, and maximum values classified the soil gas as moderately to strongly polluted in the epicenter. The investigation of soil gas CO₂, Rn and Hg degassing rate indicated that (1) the CO₂ in soil gas was characterized by a mean \(\updelta^{13}C_{CO2}\) of ?20.4 ‰ and by a mean CO₂ flux of 88.1 g m^?2 day^?1, which were in the range of the typical values for biologic CO₂ degassing. The maximum of soil CO₂ flux reached values of 399 g m^?2 day^?1 in the epicenter; (2) the soil Rn had higher exhalation in the north segment of seismic ruptures, the maximum reached value of 1976 m Bq m^?2 s^?1; (3) the soil Hg flux was lower, ranging from ?2.5 to 18.7 n g m^?2 h^?1 and increased from south to north. The mean flux over the all profiles was 4.2 n g m^?2 h^?1. The total output of CO₂ and Hg degassing estimated along seismic ruptures for a survey area of 18.17 km² were approximately 0.57 Mt year^?1 and 688.19 g year^?1. It is recommended that land-use planners should incorporate soil gas and/or gas flux measurements in the environmental assessment of areas of possible risk. A survey of all houses along seismic ruptures is advised as structural measures to prevent the ingress of soil gases, including CO₂ and Rn, were needed in some houses.     

Environmental risk induced by TiO2 dispersions in waters and sediments: a case study

A southern Italian area that is characterized by large outcrops of rocks that are rich in titanium oxide (TiO₂) phases were investigated to determine the mineralogical risk induced by the natural dispersion of TiO₂ minerals. Rock, sediment and surface water samples were collected to determine the physicochemical and mineralogical factors (i.e., size distribution, morphology and alteration) indicative of potential TiO₂ toxicity. X-ray diffraction data suggested that titanium oxides were present as rutile and anatase. Scanning electron microscopy images showed elongated TiO₂ morphologies; fibres were found as either isolated or embedded/enclosed in flake-like phyllosilicates. The concentration of fibres in stream water ranged from 1.7 to 4.6 million fibres per litre. The highest fibre amounts in the sediments were in the <8-µm fraction, while single fibres were primarily concentrated in the <2-µm fraction. The results indicate that titanium oxide minerals represent a natural source of environmental risk and that the geomineralogical characterization of rich TiO₂ areas is indispensable for understanding their geoavailability, dispersion and distribution.

     

Duckweed: an effective tool for phyto-remediation

Effective wastewater treatment through conventional methods that rely on heavy aeration are expensive to install and operate. Duckweed is capable of recovering or extracting nutrients or pollutants and is an excellent candidate for bio-remediation of wastewaters. Such plants grow very fast, utilizing wastewater nutrients and also yield cost effective protein-rich biomass as a by-product. Duckweeds being tiny surface-floating plants are easy to harvest and have an appreciable amount of protein (15%–45% dry mass basis) and a lower fiber (7%–14% dry mass basis) content. Besides nutrient extraction, duckweeds has been found to reduce total suspended solids, biochemical oxygen demand (BOD), and chemical oxygen demand in wastewater significantly. Depending on the initial concentrations of nutrients, duckweed-covered systems can remove nitrate (NO₃^?) at daily rates of 120–590 mg NO₃^? m^?2 (73%–97% of initial concentration) and phosphate (PO₄^?) at 14–74 mg PO₄^? m^?2 (63%–99% of initial concentration). Removal efficiencies within 3 days of 96% and 99% have been reported for BOD and ammonia (NH₃). Besides several genera of duckweeds (Spirodela, Lemna, Wolffia), other surface-floating aquatic plants like water hyacinth (Eichhornia) are well known for their phyto-remediation qualities.     

Monitoring and risk assessment of polychlorinated biphenyls (PCBs) in agricultural soil from two industrialized areas

For monitoring and risk assessment, levels and distributions of Σ₂₉ PCBs in paddy soil samples collected from Gwangyang (10 sites) and Ulsan (20 sites), heavily industrialized cities in Korea, were investigated using high-resolution gas chromatography/high-resolution mass spectrometry. Overall, total concentrations of Σ₂₉ PCBs in Gwangyang (216.4–978.6 pg g^?1 dw) and Ulsan (273.8–1824.1 pg g^?1 dw) were higher than those (106.6–222.6 pg g^?1 dw) in agricultural soil from Anseong in Korea. The TEQ (toxic equivalency) values from Gwangyang (0.06–0.40 ng TEQ kg^?1 dw) and Ulsan (0.06–0.22 ng TEQ kg^?1 dw) were higher than those (0.04–0.11 ng TEQ kg^?1 dw) in Anseong but lower than the WHO threshold level (20 ng TEQ kg^?1). However, one of the most toxic congeners, PCB 126, gave the highest concentration, possibly posing a risk to the biota. Seven indicator PCB congeners contributed to 50–80% of the total concentration of Σ₂₉ PCBs, indicating the 7 PCBs can be used as valuable indicators for monitoring. The principal component analysis and cluster analysis for the homologue profiles of PCBs indicated that all the samples from both cities had the similar PCB contamination patterns, and the major sources of the PCB contamination were most likely from the usage of Aroclor 1254 than those of Aroclors 1242 and 1260. These PCB technical mixtures were possibly significantly used by various industries including iron and steel industries in Gwangyang and petrochemical and shipbuilding industries in Ulsan.