Slip and fall accident prevention: A review of research, practice, and regulations

This paper summarizes current research, practices, and regulations regarding walking/working surface slipperiness and coefficient of friction (COF) measurements. The literature and data are reviewed from three aspects:

1. (a) the biomechanics of walking and psychophysiological factors involved in slips and falls studied by the scientific community,

2. (b) various measuring devices and methods developed in an attempt to quantify the “slipperiness” of walking/working surfaces, and

3. (c) an acceptable quantitative standard for the “slipperiness” of surfaces and the impact of the Americans with Disabilities Act (ADA) on such a standard.

Unresolved issues related to slip-resistance are identified. A multifaceted approach and synergy from researchers, the building industries, standards organizations, and government are needed to obtain concensus on such issues.     

“Vybuchovy trojuhelnik”: A software tool for evaluation of explosibility of coal mine atmosphere

Rescue operations during mine fires or methane explosions are highly dangerous for rescue workers. The knowledge of the composition of the coal mine atmosphere and the calculations of its explosibility may help to increase the safety of the rescuers. In the Czech Republic, a system called “Mine Gas Laboratory” (DPL) has been used for these purposes. The DPL allows measurement of the composition of the mine atmosphere and transmits the data necessary for evaluation to the surface. Up to now the explosibility evaluation of the coal mine atmosphere has depended either on the rescuers’ experience or on software code calculation. The code called “Vybuchovy trojuhelnik” (explosion triangle) is a graphical computing system intended for fast assessment of explosibility of fuel–air mixture. This article introduces the code and describes two simple methods of explosibility evaluation. The first method is “explosion triangle analysis”—a graphical method based on empirical graphs transformed into equations. The second method uses thermodynamic calculation based on chemical balance dynamics and Gibbs and Helmholtz energy. According to the requirements of the Czech Bureau of Mining (CBU) and Central Mine Rescue Service (HBZS), the code solves the problems of explosion triangle for both standard and non-standard coal mine atmosphere compositions. Unfortunately, the atmosphere composition must be introduced manually due to the unknown format of the data transmitted from the old DPL model. On 1 September 2005, a project started to develop a new system for on-line monitoring and atmosphere explosibility evaluation. The system should be able to measure CO₂, O₂, CH₄, H₂ and CO concentrations as well as the wind speed, temperature and humidity. The “Vybuchovy trojuhelnik” code will be used as a basis for explosibility evaluation, and an on-line connection with the new model of DPL will be established.     

Expert opinions, fuzzy probabilities, and warnings: toward a mathematical method for evaluating warning “read and heed” effectiveness

In many situations, and particularly in legal matters, decisions may be based on whether some possibility is judged to be “more probable than not”, as for example, whether a warning, had it been present, would “more probably than not” have prevented an injury. The probability of a warning accomplishing its purpose of preventing injury can, in principle, be computed based on probability calculus. However, this paper proposes that: (1) such computations must use “fuzzy” probability statements which as a result produce a range of weighted possibilities for the final outcome and, moreover; (2) the critical statistic for determining whether the outcome is “more probable than not” is the median rather than the mean of the possible outcomes. This paper briefly outlines the mathematics for such computations and provides several examples. The paper basically treats fuzzy probabilities as standard “random variables” restricted to the range of [0,1].For brevity, this paper only treats the multiplication of two or more fuzzy probabilities. However, this is adequate for evaluation of a two stage “read and heed”, or of longer multiple step linear sequences and is indicative of the general approach. Treatment of the additive and general case will be found in later publications.     

The Surface Roughness of a Rubber Soling Material Determines the Coefficient of Friction on Water-Lubricated Surfaces

For more than a decade, evidence has been accumulating that points to the fact that the microscopic roughness of the footwear soling surface is a major determinant of slip-resistance on lubricated surfaces, but conclusive experimental proof has been lacking. This article describes an experiment in which five pairs of shoes were soled with the same rubber compound. Four of the pairs were abraded by different grades of grit to produce a range of roughness values. The coefficient of friction (CoF) of the five solings was then measured repeatedly by the walking traction method on wet surfaces including glazed wall tiles, vinyl asbestos coated with the wax floor polish, and both sides of a sheet of float glass. The Kruskal-Wallis statistical test proved beyond doubt that the soling roughness is a major factor in determining the CoF of this rubber soling material; p < 10⁻⁵. Nearly all of the grip was due to surface roughness of the soling material on these atypically smooth floors, although the surface roughness of the floors also had a significant effect on CoF; p < 0.003. Float glass is shown to be a promising reference floor material for the measurement of CoF of footwear; there was no statistical difference between results for the two sides of the glass sheet. Float glass could be used in the development of a standard CoF test method because new sheets of glass from the same manufacturer are identical and extremely smooth. The specification of CoF values for solings/floors combinations in lubricated conditions is of little value unless associated with roughness measurements and knowledge of how wear will affect the surface roughness of the sole. This article reports the first evidence that any specification of flooring by measuring CoF based on dry surfaces could lead to an increase in the number of injuries caused by slipping on the wet surfaces. Published by Elsevier Science Ltd     

Development of a method for predicting the ignition of explosive atmospheres by mechanical friction and impacts (MECHEX)

Mechanical friction and impacts is still today a main cause of ignition of explosive atmospheres (ATEX) in the industry and this trend seems to be stable in time. This situation certainly results from a significant gap of knowledge in the underlying mechanisms so that the parameters to play on are not precisely identified. In this programme of European dimensions, the process of degradation of the mechanical energy into heat during friction and impacts have been studied.

An extensive experimental programme is presented to this end. The mechanisms of dissipation of the mechanical energy into heat during friction has been studied with rubbing machines in which a slider equipped with temperature sensors rubs against a rotating wheel. For impacts, a new device has been developed using a special “air driven cannon” to propel a projectile accurately up to 50 m/s onto an inclined target. A very significant effort has been reserved to the investigation of the ignition mechanisms, not only for ATEX but also for dust accumulations.

Some “simple” modelling is proposed on purpose of practical applications. For frictional situations, a critical rubbing power is calculated without any limitations about any lower boundary concerning the rubbing velocity. For “impacts”, the relevant parameter for ignition is not the kinetic energy of the projectile but its velocity and the nature of the materials.     

Prevention and suppression of explosions in gas-air and dust-air mixtures using powder aerosol-inhibitor

The prevention and suppression of explosions is a very topical field of research because annually hundreds of coal mine workers became their victims. In this research a very effective powder “powder for suppression of explosions” (“PSE”) for the suppression of explosions has been developed and tested. The experiments on suppression of explosions of a methane–air mixture (MAM) at a laboratory conditions using “PSE”-powder have been carried out. The possibility of lowering the power of coal-dust explosion with the help of a “PSE”-powder has been investigated. The feasibility of almost instantaneous disperse of powders using intentionally created mini-explosions (ammonal) was investigated. The barrel-suppressor of explosion in the experimental adit (tunnel) was studied and the large-scale tests for suppression of MAM-explosions in experimental adit were also subjects of study.     

Coefficient of friction,walking speed and cadence on slippery and dry surfaces: shoes with different groove depths

Objective. The present study aimed to determine the coefficient of friction (COF), walking speed (WS) and cadence while walking on slippery and dry surfaces using shoes with different sole groove depths to predict likelihood of fall. Background. Design of shoe sole groove is crucial to prevent slipping during walking. Methods. 22 healthy young men (mean age 24.5, body mass index 22.5) volunteered for this semi-experimental study. Six different conditions of the test (combination of three shoes and two surfaces) were defined and the condition was repeated three times. In total, 396 trials (22 subjects?×?3 groove depths?×?2 surfaces?×?3 times) were obtained for data analysis. COF was recorded by force platform at 1000?Hz and walking parameters recorded using 3D motion analysis with six infrared cameras at 200?Hz. Results. The highest COF was obtained from the deepest groove depth (5.0?mm) on both dry and slippery surfaces. The COF on slippery surfaces was significantly lower in comparison with dry surfaces. WS and cadence were not significantly different on dry and slippery surfaces. Conclusion. The deeper groove is better to prevent slipping because the COF increases by increasing the shoe sole groove depth. WS did not change on dry and slippery surfaces.     

Scaling parameters for vented gas and dust explosions

Results of experiments or calculations for vented explosions are usually presented by expressing a term containing the peak (reduced) pressure as a function of a vent parameter. In gas explosions, the reactivity of the system has been typically characterized through an effective burning velocity, u_f. In the case of dust explosions, a normalized peak rate of pressure rise, K(=V^1/3(dp/dt)_max), has been used instead. Depending on the chosen approach, comparisons between systems with the same “reactivity” take different meanings. In fact, correlation formulas resulting from these two approaches imply different scaling between important system parameters. In the case of a constant-u_f system, and for sufficiently large vent areas, the reduced pressure, Δp_r, is approximately proportional to the square of the peak unvented pressure, Δp_m. On the other hand, correlations developed for constant-K systems imply proportionality of Δp_r with Δp_m raised to a power between −5/3 and −1, with the exact value depending on the assumptions made on the shape of the pressure profile. While the ultimate resolution of the details of the scaling may require recourse to experiments, this theoretical analysis offers a tool for the planning of such experiments and for the interpretation of their results. The paper provides a discussion of these scaling issues with the help of predictions from an isothermal model of vented explosions.     

Risky, aggressive, or emotional driving: addressing the need for consistent communication in research

Problem. Researchers agree that a consistent definition for aggressive driving is lacking. Such definitional ambiguity in the literature impedes the accumulation of accurate and precise information, and prevents researchers from communicating clearly about findings and implications for future research directions. This dramatically slows progress in understanding the causes and maintenance factors of aggressive driving. Summary. This article critiques prevailing definitions of driver aggression and generates a definition that, if used consistently, can improve the utility of future research. Pertinent driving behaviors have been variably labeled in the literature as risky, aggressive, or road rage. The authors suggest that the term “road rage” be eliminated from research because it has been used inconsistently and has little probability of being clarified and applied consistently. Instead, driving behaviors that endanger or have the potential to endanger others should be considered as lying on a behavioral spectrum of dangerous driving. Three dimensions of dangerous driving are delineated: (a) intentional acts of aggression toward others, (b) negative emotions experienced while driving, and (c) risk-taking. Impact on Industry. The adoption of a standardized definition for aggressive driving should spark researchers to use more explicit operational definitions that are consistent with theoretical foundations. The use of consistent and unambiguous operational definitions will increase the precision of measurement in research and enhance authors' ability to communicate clearly about findings and conclusions. As this occurs over time, industry will reap benefits from more carefully conducted research. Such benefits may include the development of more valid and reliable means of selecting safe professional drivers, conducting accurate risk assessments, and creating preventative and remedial dangerous driving safety programs.     

Exploratory analysis of the safety climate and safety behavior relationship

Problem: Safety climate refers to the degree to which employees believe true priority is given to organizational safety performance, and its measurement is thought to provide an “early warning” of potential safety system failure(s). However, researchers have struggled over the last 25 years to find empirical evidence to demonstrate actual links between safety climate and safety performance.Method: A safety climate measure was distributed to manufacturing employees at the beginning of a behavioral safety initiative and redistributed one year later.Results: Multiple regression analysis demonstrated that perceptions of the importance of safety training were predictive of actual levels of safety behavior. The results also demonstrate that the magnitude of change in perceptual safety climate scores will not necessarily match actual changes (r=0.56, n.s.) in employee's safety behavior.Discussion: This study obtained empirical links between safety climate scores and actual safety behavior. Confirming and contradicting findings within the extant safety climate literature, the results strongly suggest that the hypothesized climate-behavior-accident path is not as clear cut as commonly assumed.Summary: A statistical link between safety climate perceptions and safety behavior will be obtained when sufficient behavioral data is collected.Impact on Industry: The study further supports the use of safety climate measures as useful diagnostic tools in ascertaining employee's perceptions of the way that safety is being operationalized.     

The reality of “Revitalizing Health and Safety”

Problem: Workplace health and safety remains an important international socioeconomic issue, but the progressive declines in reported incidents may be slowing. The British Government has responded by launching a new policy initiative aimed at “Revitalizing Health and Safety” by establishing targets for improvement, strategies, and a series of action points, mainly targeting employers and organizational issues. This paper critically assesses the realities of implementing this policy with respect to the scientific base for each of the strategies. Method: Literature meta-analysis; analysis of policy. Results: Empirically proven determinants of workplace health and safety provide baselines for compensation and conditions of work, workforce characteristics, workplace characteristics, health and safety environment, political and economic factors, and industry characteristics. Support for different policy elements is varied and there are some significant gaps. Summary: An impressive body of research was found that offers a firm foundation for future developments. However, the need for work that is interdisciplinary, ordered, and collaborative is pressing. The need to move away from elegant but simplistic pictures of occupational health and safety (OHS) management practice, and to reflect true complexity is imperative. The reality of health and safety at work is that it is an issue that is taken lightly by those who do not practice or research safe and healthy working, and a serious issue for victims or relatives of victims of shoddy management. It remains one of the bastions of inequality of work worldwide. Impact on industry: The intent of governments in attempting to reinvigorate the suppression of workplace injury and illness is motivated by both social and economic imperatives. Motivation for organizations is not fully understood as there is no obvious business imperative. If organizations can further understand and provide a scientific justification for investment in OHS management, then governments' task will be made easier. By proving the value of OHS to management, we will demonstrate that organizations continue to present considerable hazards to their employees.     

Integrating human factors and systems engineering to reduce the risk of operator “error”

Introducing safety devices does not always reduce the frequency of accidents. Operators adjust their response to technological improvements. Protection mechanisms may be used to support “unsafe” working practices so that the net risk of failure remains unchanged or may even rise. Regulatory bodies have reacted against this risk compensation. Rules and procedures have been imposed upon the day-to-day operation of protection equipment. Unfortunately, these constraints often fail to preserve the safety of an application. Inattention, fatigue, poor training and willful neglect can lead to rules and guidelines being ignored. In this paper alternative means of reducing threats posed by risk compensation are explored. In particular, it is argued that designers must exploit an integrated approach to the development of high-risk applications. By this we mean that both human factors and systems engineering must be recruited to support the development of protection equipment.     

Risk assessment of antagonistic hazards

This paper considers the risk to major hazard plant from terrorists deliberately causing catastrophic industrial accidents. The United States of America Department of Justice [Assessment of the increased risk of terrorist or other criminal activity associated with posting off-site consequence analysis information on the internet, 2000] reports that “breaching a containment vessel of an industrial facility with an explosive or otherwise causing a chemical release may appear relatively simple to…a terrorist”. They concluded that the risk of such action is “real and credible”.

Analysis of terrorism is often hampered by its being described as ‘irrational’; one corollary would be that it is unpredictable. However, terrorism may usefully be treated as a rational behaviour and in doing so it becomes possible to assess the risks it causes.

We analyse the vulnerability of major hazard plant to terrorist attack and identify nine factors (access, security, visibility, opacity, secondary hazard, robustness, law enforcement response, victim profile, and political value) that might be used as a starting point for more formal risk assessment and management.     

Electrostatic spark ignition of sensitive dust clouds of MIE<1 mJ

Accidental electrostatic sparks in industrial plant producing/handling powders/dusts occur whenever a non-earthed electrically conducting object has been charged tribo-electrically to a high voltage and suddenly discharges its energy to earth via an air gap of appropriate length. When assessing the electrostatic spark ignition hazard in an industrial plant, the parameters of prime concern are the capacitances C of electrically conducting plant items that may become charged tribo-electrically, the voltages U to which they may become charged, and the minimum electric spark ignition energies (MIE) of the dust clouds of concern. Whenever , there is a possibility of accidental electrostatic spark ignition.

Current standard apparatuses for determining MIE of dust clouds have a lower spark energy limit of 2–3 mJ. In an investigation by the present authors, discussed in detail elsewhere, a new spark generator capable of producing synchronized capacitive sparks of energies down to the order of 0.01 mJ was developed and used for testing a selection of ignition-sensitive powders for MIE. Several of the MIEs found were 1–2 orders of magnitude lower than the lower energy limit of current standard test apparatus. Other experiments by the present authors, also reported elsewhere, have shown that quite low MIEs can be found for some dusts even with a less optimal synchronization mechanism, which may occur accidentally in practice.

The main object of the present paper is to discuss possible practical concerns arising from the finding that clouds in air of some dusts can have very low MIEs. In such cases, one may have to pay attention to even minor C values, i.e. minor plant items. Alternatively, with larger C values, even quite low voltages may give rise to hazardous spark discharges.

However, some types of fine metal powders of low MIEs will quite readily form electrically conductive layers on the solid surfaces with which they make contact. Hence, electrostatic spark ignition inside process equipment containing such dusts may be less probable than in the case of process equipment containing non-conducting dusts of correspondingly low MIEs.

There may be a need for a new standard test method for determination of MIEs of dust clouds in the <1 mJ range.     

Safety-culture in a Norwegian shipping company

Problem: Although there has been considerable interest in safety culture and safety climate in many industries, little attention has been given to safety culture in one of the world's riskiest industries, shipping. Method: Using both self developed items and items from published research on safety culture, safety climate, and quality and management style, a 40-item safety culture questionnaire was developed. The questionnaire was distributed in a self-administered form to sailors onboard 20 vessels and to officers attending a seminar in Manila. A total of 349 questionnaires were collected (total response rate, 60%). Results, discussion and impact on industry: Principal component analysis (PCA) revealed 11 factors when the Kaiser eigenvalue rule was used and four factors when the scree test criterion was used. The factor structure in the material confirmed structures found in other industries. The relative importance of the factors from the factor analysis on “level of safety” measures was tested by canonical correlation analysis and regression analysis. The results confirmed previous research and showed that the most important factors were influential across industries. To determine weather differences existed between nationalities, occupations, and vessels the factors from the PCA was subjected to Multiple Discriminant Analysis. Significant differences between occupations, nations, and vessels were found on one or more of the factors from the PCA.     

Unified correlations for vent sizing of enclosures at atmospheric and elevated pressures

Innovative vent sizing technology is presented for explosion safety design of equipment at atmospheric and elevated initial pressures. Unified correlations for vent sizing are suggested. They are modifications of previously reported correlations verified thoroughly for experimental data on vented gaseous deflagrations under different conditions but only at initial atmospheric pressure. Suggested correlations are based on experimental data on vented deflagrations of quiescent and turbulent propane–air mixtures at initial pressures up to 0.7 MPa. Typical values of turbulence factor and deflagration–outflow interaction number are obtained for experimental vented deflagrations at initial pressures higher than atmospheric.

“Blind” examination of new vent sizing technology on another set of experiments with methane–air and propane–air mixtures has shown that predictions by suggested vent sizing technology are better than by the NFPA 68 guide for “Venting of Deflagrations”.

In the development of recently reported results for initial atmospheric pressure it has been concluded that the innovative vent sizing technology is more reliable compared to the NFPA 68 guide at elevated initial pressures as well. Moreover it is crucial that the calculation procedure remains the same for arbitrary deflagration conditions.     

Accidents and risk control

A framework for transformation of knowledge and experience from risk analysis to emergency education is presented. An accident model was developed built on the concept “uncontrolled flow of energy (UFOE)”, where essential elements are the state, location and movement of the energy. A UFOE can be considered as the driving force of an accident, e.g. an explosion, a release of heavy gases. A domain model has been developed for representing emergencies occurring in society. A domain is a group of activities with allied goals and elements, and the domain model uses three main categories: status, context and objectives. Ten specific domains have been investigated including process plant, energy production and distribution, natural disasters and different sorts of transport. Totally 25 accident cases were consulted and information was extracted for filling into the schematic representations with two to four cases pr. specific domain.     

Risk and system integrity concepts for safety-related control systems

This paper provides an overview of the concepts of “risk” and “safety-integrity” in relation to safety-related electrical/electronic/programmable electronic systems. The paper is an abridged version of Annex A of the emerging International Electrotechnical Commission (IEC) Standard; “Functional safety of electrical/electronic/programmable electronic systems”. Although based on Annex A, the authors have deviated in a few instances, from the strict wording of Annex A in order to more properly represent their own views. Where this occurs, a note in the text has been added to alert the reader of the deviation. The concepts of risk (including tolerable risk; safety integrity; safety-related system; System and Software Integrity Levels) are discussed.     

Accident rates of drivers with bioptic telescopic lenses

The major purpose of this study was to determine the accident rate of drivers with bioptic telescopic lenses (“bioptic drivers”) in California. The bioptic driver group consisted of 229 drivers, while a randomly selected comparison sample consisted of 21,064 drivers. The 2-year total and fatal/injury accident rates of the bioptic group were normalized to the age/sex distribution of the comparison sample. Normalized accident rates for bioptic drivers were significantly greater than the corresponding rates for comparison drivers. The study also included an analysis of the driving records of bioptic drivers prior and subsequent to acquisition of telescopic lenses and an analysis of total and fatal/injury accidents for bioptic and comparison drivers with valid licenses only. It was recommended that California continue to license bioptic drivers, but with greater use of license restrictions and more stringent post-licensing control.