Removal of selenite using ‘waste’ Fe(III)/Cr(III) hydroxide: Adsorption kinetics and isotherms

Removal of selenite [Se (IV)] from aqueous solution on to industrial solid ‘waste’ Fe(III)/Cr(III) hydroxide as adsorbent was investigated in the present article. Maximum adsorption was found to be at pH 4.0. Pretreated Fe(III)/Cr(III) hydroxide was found to be more efficient for the removal of selenite compared to untreated adsorbent. Langmuir and Freundlich isotherms have been studied. The Langmuir adsorption capacity (Q ₀) of the pretreated and untreated adsorbents was found to be 15.63 and 6.04?mg?g^?1, respectively. The adsorption process fit into the second-order kinetics. Thermodynamic parameters show that the adsorption process is spontaneous and endothermic in the temperature range 32 to 60°C. Coexisting anions vanadate and phosphate significantly affect the adsorption of selenite for both the pretreated and untreated adsorbents. Molybdate, thiocyanate, sulphate, nitrate and chloride do not significantly affect the removal of selenite for pretreated adsorbent.     

Cycling of selenite and selenate in marine phytoplankton

The marine phytoplankton Dunaliella tertiolecta, Cachonina niei, Thalassiosira nordenskioldii, Phaeodactylum tricornutum, and Chaetoceros sp. were incubated with a range of molar concentrations of sodium-selenite (Na₂-SeIVO₃) and sodium-selenate (Na₂-SeVIO₄) to examine further their role in metabolic cycling of selenium in ocean waters. At low selenium concentrations, approaching those found naturally in seawater (10^-10 to 10^-9 M), all species distinguished between selenite and selenate, and actively concentrated selenite from the incubating medium while only marginally accumulating selenate. At much higher concentrations (10^-8 to 10^-6 M), selenate was also taken up. At the highest concentration tested, i.e., 10^-5 M with C. niei, after an immediate rapid uptake in the first 24 h, the intracellular selenite and selenate levels dropped to about 35 to 50% of the initial peak values. These observations suggest an uptake mechanism in these algae which, at normal ambient concentrations of selenium (10^-9 M), preferentially selects selenite and excludes selenate. At much higher concentrations (10^-8 M), the mechanism becomes overloaded and both selenium species enter the cells. Intracellularly, selenite became associated primarily with protein and amino acid fractions, in approximately equal proportions, while only ca. 4% of total intracellular selenium was found in the lipid fraction. Trace amounts of selenate that entered the cells, mainly during the first minutes of exposure, also entered the protein and amino acid components, but over time were increasingly associated with the protein fraction only. At the end of a 10-d incubation of algal cells in selenite-spiked medium, less than 25% of total Se in the medium could in fact be identified analytically as selenite. This suggests the presence of a non-selenite metabolite, possibly released back into the medium from the algae.     

Adsorption of cationic and anionic surfactants onto organic polymer resin Lewatit VPOC 1064 MD PH

The adsorption of a cationic (CTAB, cetyl trimethylammonium bromide) and an anionic surfactant (SLES, sodium dodecylethersulfate) from aqueous solution onto organic polymer resin (Lewatit VPOC 1064 MD PH) was studied. A series of batch experiments were performed to determine the sorption isotherms of surfactants to organic polymer resin. The experimental studies were analyzed by Langmuir and Freundlich isotherms. Furthermore, the isotherm parameters, average percentage errors (ε) of model data, and separation factor (R _L) were calculated. Other factors influencing the adsorption capacity (contact time, adsorbent amount, and initial surfactant concentration) were also discussed. The experimental data fitted very well to the Langmuir equilibrium model in the studied concentration range. The calculated R _L values showed that the adsorption of both surfactants were favorable. Among the surfactants, CTAB showed higher adsorption capacity onto organic polymer resin compared to SLES (Q ⁰ = 250 and 34.36 mg g⁻¹, respectively).     

Influence of some abiotic environmental factors on acute toxicity of inorganic lead to Cyprinus carpio var communis (Linn.) and Catla catla (Ham.) in simulated toxic aquatic environment

With the increase of water hardness from 60 to 720?mg/L CaCO₃, total alkalinity from 32 to 376?mg/L CaCO_3, pH from 7.6 to 7.9 and chloride from 28 to 350?mg/L, 96?h LC₅₀ on the basis of total lead increased from 8.2 to 1291?mg/L for Cyprinus carpio and 5.3 to 865?mg/L for Catla catla, when soil sediments were included these values were further raised to 1356 and 874?mg/L, respectively. The dissolved lead LC₅₀ values in all the treatments of soil and water was consistent with fixed amount of dissolved lead (1.04–1.78?mg/L) being needed for median lethal toxicity. Total lead toxicity also decreased with increase in pH from 6.3 to 11.3. 96?h LC₅₀ values increased for common carp 15 to 631?mg/L and for catla, 8 to 355?mg/L. But dissolved lead toxicity was found to increase with the increase of pH from 6.3 to 11.3 for both common carp (LC₅₀, 3.53 to 0.24?mg/L) and catla (LC₅₀, 2.21 to 0.09?mg/L). Removal of dissolved Pb with increasing carbonate content, particulate matter and pH due to adsorption, precipitation or coprecipitation reaction, reduced the dissolved lead concentration and thus the total lead toxicity. Increase in toxicity of lead with increase of exposure time was the biological response of longer contact time and decrease in dissolved lead toxicity with decrease in pH was due to increase H⁺ ion competition.     

Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces

This study examines the adsorption isotherms, kinetics and mechanisms of Pb²⁺ sorption onto waste cow bone powder (WCBP) surfaces. The concentrations of Pb²⁺ in the study range from 10 to 90 mg/L. Although the sorption data follow the Langmuir and Freundlich isotherm, a detailed examination reveals that surface sorption or complexation and co-precipitation are the most important mechanisms, along with possibly ion exchange and solid diffusion also contributing to the overall sorption process. The co-precipitation of Pb²⁺ with the calcium hydroxyapatite (Ca-HAP) is implied by significant changes in Ca²⁺ and PO₄ ^3? concentrations during the metal sorption processes. The Pb²⁺ sorption onto the WCBP surface by metal complexation with surface functional groups such as ≡ POH. The major metal surface species are likely to be ≡ POPb⁺. The sorption isotherm results indicated that Pb²⁺ sorption onto the Langmuir and Freundlich constant q _max and K _F is 9.52 and 8.18 mg g^?1, respectively. Sorption kinetics results indicated that Pb²⁺ sorption onto WCBP was pseudo-second-order rate constants K ₂ was 1.12 g mg^?1 h^?1. The main mechanism is adsorption or surface complexation (≡POPb⁺: 61.6%), co-precipitation or ion exchange [Ca_3.93 Pb_1.07 (PO₄)₃ (OH): 21.4%] and other precipitation [Pb 50 mg L^?1 and natural pH: 17%). Sorption isotherms showed that WCBP has a much higher Pb²⁺ removal rate in an aqueous solution; the greater capability of WCBP to remove aqueous Pb²⁺ indicates its potential as another promising way to remediate Pb²⁺-contaminated media.     

Selenium improves physiological responses and nutrient absorption in wheat (Triticum aestivum L.) grown under salinity

Abstract

Salinity is a serious limiting factor for crop growth and production. The present study was conducted to investigate the response of wheat grown at salinities of 0.12, 0.30 and 0.60?S?m^?1 on soil supplemented with 0, 0.5, 1 and 4?mg?kg^?1 Se as selenite. Chlorophyll a and b, carotenoid contents, Fe, Zn and Se in shoots as well as shoot dry weight were negatively affected by increased salinity. Se had a dual effect: at 0.5?mg?kg^?1, chlorophyll b, proline, and shoot Fe content were increased, catalase activity was stimulated; there was no effect on Zn content and shoot dry weight. At the two higher concentrations, Se led to decreases in chlorophyll content, nutrient concentration, and shoot dry weight. Thus, moderate addition of Se to soil could be a strategy to improve physiological responses and micronutrient status in wheat under salinity stress.     

Removal of chromium(VI) by ZnCl2 activated coir pith carbon

The adsorption of chromium(VI) onto ZnCl₂ activated carbon developed from coir pith was investigated to assess the possible use of this adsorbent. The influence of contact time, adsorbent dose, Cr(VI) concentration, pH and temperature were investigated. The two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q ₀) was found to be 120.5?mg Cr(VI) per g of the adsorbent. The adsorption followed the second-order kinetics and was found to be maximum at pH 2.0. The pH effect and the desorption studies showed that ion exchange mechanism might be involved in the adsorption process. The effects of foreign ions such as chloride, sulphate, phosphate, selenite, molybdate, nitrate and perchlorate on the removal of Cr(VI) have been investigated. The removal of Cr(VI) from synthetic ground water was also tested. The results show that ZnCl₂ activated coir pith carbon is effective for the removal of Cr(VI) from water.     

几类有机污染物的微塑料/水分配系数的线性溶解能关系模型

水体中的微塑料会吸附其中的有机污染物,影响有机污染物和微塑料的环境归趋和生态毒性。研究微塑料对有机污染物的吸附行为,对于评价有机污染物和微塑料的环境赋存、迁移及生物有效性有重要意义。污染物在微塑料与水之间的平衡分配系数(Kd),是表征微塑料对有机污染物吸附能力的重要参数。实验方法难以逐个测定众多有机污染物的Kd值,有必要发展其预测模型。本研究搜集了有机污染物的线性溶解能关系(LSER)参数及Kd值,构建了可预测有机污染物在聚丙烯微塑料与海水、聚乙烯微塑料与海水、聚乙烯微塑料与淡水之间Kd值的LSER模型。模型具有良好的拟合优度(R2adj介于0.794~0.903)、稳健性(Q2LOO和Q2BOOT分别介于0.763~0.863和0.720~0.804)和预测能力(R2ext和Q2ext分别介于0.886~0.971和0.825~0.954),能够用于预测多氯联苯、多环芳烃、六氯环已烷和氯苯类有机污染物的Kd值。     

Optimisation of bisphenol A removal from water using chemically modified pine bark and almond shell

The ability of pine bark and almond shells to remove bisphenol A (BPA) from aqueous solutions was evaluated. Samples of these traditional agro-forestry by-products were milled, sieved into different particle size fractions (0.10–0.15 and 1.5–2.0 mm) and submitted to two different types of treatment. Sorption experiments were conducted in a batch system at room temperature and natural pH. Sorption equilibrium was attained after 48 h for all systems under study. Bisphenol A was adsorbed more effectively on the smaller particles of the sorbents. Pine bark and almond shell pretreated with formaldehyde presented higher sorption efficiency (95%), followed by almond shell (87%) and pine bark (82%) washed with hot water. All the sorption isotherms were found to fit a Freundlich equation, with correlation coefficients (R ²) between 0.823 and 0.989. The sorption coefficient (K _F) ranged from 0.06 to 0.74 (mg^1?1/n ·L ^1/n ·g ^?1). These results indicate that utilisation of both materials as an alternative sorbent for the removal of bisphenol A from contaminated waters is promising because they are available in large amounts and have an acceptable cost–efficiency ratio when compared with traditional adsorbents.     

Selenium Distribution in Topsoils and Plants of a Semi-arid Mediterranean Environment

Selenium was determined from 25 topsoils and 25 plants in the semi-arid Central Spain where large extents of soils are developed on evaporitic materials. Some species of vegetation associated with them are of the genera Astragalus, Salsola, Mercurialis, Phlomis, Thymus and Atriplex. Total selenium in soils was determined and its bioavailability assessed by chemical sequential fractionation. Se content in soils was adequate (in the range 0.17–0.39 mg kg⁻¹) or large (in the range 0.50–4.38 mg kg⁻¹) and appeared in highly and/or potentially available forms. Several plant species showed high Se levels (in the range 5–14.3 mg kg⁻¹), which can be a potential risk of toxicity to animals. Data obtained from the study area can be used as a guide to the range of values in soils and plants of the European Mediterranean area that are relatively unpolluted from industrial sources, allowing comparison with more polluted areas.     

Adsorption of vanadate(V) on Fe(III)/Cr(III) hydroxide waste

Adsorption of vanadate(V) from aqueous solution onto industrial solid ‘waste’ Fe(III)/Cr(III) hydroxide was investigated. HCl treated Fe(III)/Cr(III) hydroxide was found to be more efficient for the removal of vanadate(V) compared to untreated adsorbent. The adsorption follows second-order kinetics. Langmuir and Freundlich isotherms have been studied. The Langmuir adsorption capacity (Q ₀) of the treated and untreated adsorbents was found to be 11.43 and 4.67 mg g⁻¹, respectively. Thermodynamic parameters showed that the adsorption process was spontaneous and endothermic in the temperature range 32–60°C. Maximum adsorption was found at system pH 4.0. The adsorption mechanism was predominantly ion exchange. Effect of other anions such as phosphate, selenite, molybdate, nitrate, chloride, and sulfate on adsorption of vanadium has been examined.     

Effect of metallic cations on the sorption of pesticides on soil

We studied the adsorption and desorption of two pesticides, namely isoproturon and dimetomorph, onto a model soil sample. We first show that the adsorption of isoproturon depends on pH, from 1 mg g⁻¹ at pH 4 to 2 mg g⁻¹ at pH 10, contrary to the adsorption of dimetomorph (5.8 mg g⁻¹). We also studied the influence of metallic cations, copper(II), iron(III), manganese(II), and chromium(III), on the sorption of isoproturon and dimetomorph. We found that in the case of isoproturon, the presence of metallic cations does influence the retention capacity of the soil sample. The sorption becomes very weak in the presence of copper and chromium, whereas in the case of iron and manganese the sorption properties are slightly modified.     

Sorption of the natural endocrine disruptors,oestrone and 17 beta-oestradiol in the aquatic environment

Adsorption of hydrophobic contaminants at the particle/water interface is one of the key processes controlling their fate in the aquatic environment. The sorption of the natural female hormones oestrone and 17-oestradiol has been studied under simulated riverine conditions. Both the kinetics and the effects of varying fundamental environmental parameters (e.g. sediment properties) on the thermodynamic equilibrium partition coefficient (K _p) have been studied in continuous and batch sorption experiments, respectively. Results showed that the sorption of oestrone and 17-oestradiol by sediment was relatively slow, reaching equilibrium in 50 days. In addition, relatively small adsorption of both oestrone and 17-oestradiol onto the sediment was observed, with K _p values between 200 and 250 mL g^–1. The comparable K _p values of the two compounds reflect their structural similarity. It can be concluded that the two endocrine disruptors, oestrone and 17-oestradiol remain primarily in association with the aqueous phase.     

Modelling the kinetics and equilibrium properties of cadmium biosorption by river green alga and water hyacinth weed

Cadmium biosorption properties of non-living, dried river green alga from a river source, and water hyacinth weed, Eichhornia crassipes from a lake in Zimbabwe have been investigated. The cadmium uptake was found to depend on initial pH, uptake being apparently minimal at low pH values and increasing with an increase in pH. Cadmium biosorption kinetics by both samples is fast, with 80% of total uptake occurring within 60?min. The effect of initial solution pH and initial cadmium concentration on cadmium biosorption from a cadmium solution has been studied. The data for algal biomass fitted the Langmuir monolayer adsorption isotherm, while the biosorption of the metal by water hyacinth weed fitted the Freundlich adsorption isotherm with 1/n values all less than 1. Maximum metal uptake capacities were recorded using 0.35?g of biomass and a 250?mg?L^?1 cadmium solution at pH 6.5 and at 25°C and these were about 85 and 50?mg?L^?1 for water hyacinth weed and green alga, respectively, showing that water hyacinth weed offered a greater potential for cadmium uptake. The absorption was described by pseudo-second order rate model and the rate constant and equilibrium sorption capacity are reported.     

Effect of selenite and seleniferous fly-ash leachate on growth and viability of the marine amphipod Allorchestes compressa

Juveniles of the amphipod Allorchestes compressa Dana were exposed to sodium selenite and to seleniferous leachate from coal fly-ash. A maximum acceptable toxicant concentration (MATC) for selenite of >44<93 g Se l^-1 is indicated by the results for growth and viability. Leachate:sea water mixtures produced effects which were consistent with selenite toxicity but quantitatively less drastic than expected from the pure selenite work, perhaps because of sulphate antagonism. The results are compared with selenium toxicity data for other aquatic species, and high-light the difficulties of using application factors as the basis for water-quality criteria.     

Über den Einfluß der Nahrungskonzentration und anderer Faktoren auf Filtrierleistung und Nahrungsausnutzung der Muscheln Arctica islandica und Modiolus modiolus

Filtration rates and the extent of phagocytosed food particles were determined in the offshore lamellibranchs Artica islandica and Modiolus modiolus in relation to particle concentration, body size and temperature. Pure cultures of the algae Chlamydomonas sp. and Dunaliella sp. were used as food. A new method for determining filtration rates was developed by modifying the classical indirect method. The concentration of the experimental medium (100%) was kept constant to ±1%. Whenever the bivalves removed algae from the medium, additional algae were added and the filtration rate of the bivalves expressed in terms of percentage amount of algae added per unit time. The concentration of the experimental medium was measured continuously by a flow colorimeter. By keeping the concentration constant, filtration rates could be determined even in relation to different definite concentrations and over long periods of time. The amount of phagocytosed food was measured by employing the biuret-method (algae cells ingested minus algae cells in faeces). Filtration rates vary continuously. As a rule, however, during a period of 24 h, two phases of high food consumption alternate with two phases of low food consumption during which the mussels' activities are almost exclusively occupied by food digestion. Filtration rate and amount of phagocytosed algae increase with increasing body size. Specimens of A. islandica with a body length of 33 to 83 mm filter between 0.7 to 71/h (30–280 mg dry weight of algae/24 h) and phagocytose 21 to 122 mg dry weight of algae during a period of 24 h. The extent of food utilization declines from 75 to 43% with increasing body size. In M. modiolus of 40 to 88 mm body length, the corresponding values of filtration rate and amount of phagocytosed algae range between 0.5 and 2.5 l/h (20–100 mg dry weight of algae) and 17 to 90 mg dry weight of algae, respectively; the percentage of food utilization does not vary much and lies near 87%. Filtration rate and amount of phagocytosed algae follow the allometric equation y=a·x ^b. In this equation, y represents the filtration rate (or the amount of phagocytosed algae), a the specific capacity of a mussel of 1 g soft parts (wet weight), x the wet weight of the bivalves' soft parts, and b the specific form of relationship between body size and filtration rate (or the amount of phagocytosed algae). The values obtained for b lie within a range which indicates that the filtration rate (or the amount of phagocytosed algae) is sometimes more or less proportional to body surface area, sometimes to body weight. Temperature coefficients for the filtration rate are in Arctica islandica Q₁₀ (4°–14°C)=2.05 and Q₁₀ (10°–20°C)=1.23, in Modiolus modiolus Q₁₀ (4°–14°C)=2.33 and Q₁₀ (10°–20°C)=1.63. In A. islandica, temperature coefficients for the amount of phagocytosed algae amount to Q₁₀ (4°–14°C)=2.15 and Q₁₀ (10°–20°C)=1.55, in M. modiolus to Q₁₀ (4°–14°C)=2.54 and Q₁₀ (10°–20°C)=1.92. Upon a temperature decrease from 12° to 4°C, filtration rate and amount of phagocytosed algae are reduced to 50%. At the increasing concentrations of 10×10⁶, 20×10⁶ and 40×10⁶ cells of Chlamydomonas/l offered, filtration rates of both mollusc species decrease at the ratios 3:2:1. At 12°C, pseudofaeces production occurs in both species in a suspension of 40×10⁶, at 20°C in 60×10⁶ cells of Chlamydomonas/l. At 12°C and 10–20×10⁶ cells of Chlamydomonas/l, the maximum amount of algae is phagocytosed. At 40×10⁶ cells/l, the amount of phagocytosed cells is reduced by 26% as a consequence of low filtration rates and intensive production of pseudofaeces. At 20°C and 20–50×10⁶ cells of Chlamydomonas/l, the maximum amount of algae is sieved out and phagocytosed; the concentration of 10×10⁶ cells/l is too low and cannot be compensated for by increased activity of the molluscs. With increasing temperatures, the amount of suspended matter, allowing higher rates of filtration and food utilization, shifts toward higher particle concentrations; but at each temperature a threshold exists, above which increase in particle density is not followed by increase in the amount of particles ingested. Based on theoretical considerations and facts known from literature, 7 different levels of food concentration are distinguishable. Experiments with Chlamydomonas sp. and Dunaliella sp. used as food, reveal the combined influence of particle concentration and particle size on filtration rate. Supplementary experiments with Mytilus edulis resulted in filtration rates similar to those obtained for M. modiolus, whereas, experiments with Cardium edule, Mya arenaria, Mya truncata and Venerupis pullastra revealed low filtration rates. These species, inhabiting waters with high seston contents, seem to be adapted to higher food concentrations, and unable to compensate for low concentrations by higher filtration activities. Adaptation to higher food concentrations makes it possible to ingest large amounts of particles even at low filtration rates. Suspension feeding bivalves are subdivided into four groups on the basis of their different food filtration behaviour.     

Biosynthesis of iron nanoparticles and their application in removing phosphorus from aqueous solutions

This paper reports the biosynthesis of nanoscale zero-valent iron (nZVI) using the extracts of Shirazi thyme leaf (Th-nZVI) and pistachio green hulls (P-nZVI). Scanning electron microscopy verified the successful synthesis of the poorly crystalline nZVI with a spherical shape and diameter in the range of 40–70 nm. According to X-ray diffraction and Fourier transform infrared spectroscope analyses, the synthesised nZVI were composed of iron oxides nanoparticles and ployphenol obtained from Shirazi thyme leaf and pistachio green hulls extracts acting as both reducing and capping agents. The phosphorus removal efficiency of Th-nZVI and P-nZVI increased with time and reached equilibrium at about 4 and 2h, respectively. Sorption of phosphorus on both sorbents was observed to be pH-dependent with maximum phosphorus removal occurring in the pH range of 2–5. Langmuir, Freundlich, Redlich–Peterson, and Temkin models were used to describe phosphorus sorption at pH 5 and maximum sorption capacity for Th-nZVI and P-nZVI was about 40.52 and 29.33?mg?g^?1, respectively. Correlation coefficient (R²) and standard errors of estimate showed that the Elovich model was better than other models at describing the kinetic data. These results suggested that the synthesised nZVI with Shirazi thyme leaf and pistachio green hulls extracts could be employed as an efficient sorbent for the remediation of phosphorus from contaminated water sources.     

Chemically modified biochar produced from conocarpus waste increases NO<Subscript>3</Subscript> removal from aqueous solutions

Biochar has emerged as a universal sorbent for the removal of contaminants from water and soil. However, its efficiency is lower than that of commercially available sorbents. Engineering biochar by chemical modification may improve its sorption efficiency. In this study, conocarpus green waste was chemically modified with magnesium and iron oxides and then subjected to thermal pyrolysis to produce biochar. These chemically modified biochars were tested for NO₃ removal efficiency from aqueous solutions in batch sorption isothermal and kinetic experiments. The results revealed that MgO-biochar outperformed other biochars with a maximum NO₃ sorption capacity of 45.36 mmol kg^?1 predicted by the Langmuir sorption model. The kinetics data were well described by the Type 1 pseudo-second-order model, indicating chemisorption as the dominating mechanism of NO₃ sorption onto biochars. Greater efficiency of MgO-biochar was related to its high specific surface area (391.8 m² g^?1) and formation of strong ionic complexes with NO₃. At an initial pH of 2, more than 89 % NO₃ removal efficiency was observed for all of the biochars. We conclude that chemical modification can alter the surface chemistry of biochar, thereby leading to enhanced sorption capacity compared with simple biochar.