欧盟国家燃煤电厂环保政策及技术路线分析

温室气体的排放控制作为全球性的环境问题受到了广泛关注。中国是火力发电的大国,其燃煤机组的温室气体排放总量巨大。《火电厂大气污染物排放标准》（GB 13223-2011）提高了我国燃煤电厂的烟气污染物排放的要求,对火电厂烟气处理的技术选择和投资都会产生重大影响。针对中国燃煤电厂环保面临的新形势,阐述了欧盟国家的环保政策重点,并对欧盟国家燃煤电厂污染物控制的相关标准进行了分析,同时简要介绍了欧盟国家燃煤电厂环保的主要技术路线,在一定程度上可作为中国燃煤电厂污染物控制的借鉴和参考。     

Pulp and paper plant wastes valorisation in bituminous mixes

Nowadays, the increasing amount of wastes is a concerning reality and the environmental aspects has become a major priority. Following this worry, the purpose of this experimental study was to investigate the possibility of using pulp and paper inorganic wastes, named dregs and grits, in bituminous mixtures as aggregate replacement to reduce environmental effects of these wastes disposal.First, the wastes were chemically and physically characterized and also tested primarily taking into account the requirements for aggregates in bituminous mixtures. Then, formulations were prepared replacing aggregates with wastes in different amounts. The mechanical properties of these mixtures containing wastes were compared with reference samples based on standard methods.According to the results it was possible to verify that grits had a good performance and it might be directly tested industrially as an aggregate in road construction. On the other hand, dregs need to be treated before incorporation to guarantee stable mixes in terms of water sensitivity.     

Tritium inventory prediction in a CANDU plant

The flow of tritium in a CANDU nuclear power plant was modeled to predict tritium activity build-up. Predictions were generally in good agreement with field measurements for the period 1983–1994. Fractional contributions of coolant and moderator systems to the environmental tritium release were calculated by least square analysis using field data from the Wolsong plant. From the analysis, it was found that: (1) about 94% of tritiated heavy water loss came from the coolant system; (2) however, about 64% of environmental tritium release came from the moderator system. Predictions of environmental tritium release were also in good agreement with field data from a few other CANDU plants. The model was used to calculate future tritium build-up and environmental tritium release at Wolsong site, Korea, where one unit is operating and three more units are under construction. The model predicts the tritium inventory at Wolsong site to increase steadily until it reaches the maximum of 66.3 MCi in the year 2026. The model also predicts the tritium release rate to reach a maximum of 79 KCi/yr in the year 2012. To reduce the tritium inventory at Wolsong site, construction of a tritium removal facility (TRF) is under consideration. The maximum needed TRF capacity of 8.7 MCi/yr was calculated to maintain tritium concentration effectively in CANDU reactors.     

燃煤电厂无旁路烟气脱硫系统的设计与调试

随着我国环保标准的提高,电厂烟气脱硫系统取消旁路成了大势所趋。介绍了燃煤电厂无旁路烟气脱硫系统的设计与调试方案,阐述了无旁路脱硫系统的工艺流程、特点,以及在实际工程设计中应注意的要点,探讨了无旁路脱硫系统调试过程中需要重点检查的事项,并提出了异常情况的处理方法。     

兴建垃圾电厂的基本原则

垃圾电厂是一种新兴的发电形式。根据垃圾电厂的特殊性和公益性原则，结合广东省的实例进行具体分析。兴建垃圾电厂与常规发电厂所遵循原则的区别主要体现在厂址选择、设备选择和工程造价等几方面，同时还应遵循国家环境保护标准，使垃圾电厂保持良性发展，争取达到经济效益与环境效益的统一。     

氨法在燃煤电厂烟气治理中的应用和发展

燃煤排放的CO2、SO2、NOx等气态污染物会造成酸雨、温室效应、臭氧层破坏等一系列的大气环境问题。减少和抑制燃煤电厂燃烧过程中污染气体的排放，是实现清洁生产和能源可持续发展的基本需要。氨法烟气治理技术作为电厂排放烟气处理的新兴技术，以其污染物脱除效率高、耗能小、二次污染低、脱除副产品可资源化等特点，得到了越来越多的关注，并已在部分燃煤电厂得到成功的应用。对氨法脱除烟气中气态污染物技术进行了分析和总结，并对其应用前景进行了分析和预测，指出了氨法烟气治理技术在燃煤电厂烟气处理方面具有良好的经济、社会和环保效益，并具有广阔的发展前景。     

基于火用参数环境影响评价探讨

基于煳参数与环境之间的关系，论述了将斓参数用于环境影响评价的可行性。提出通过修正标准参考环境而确定安全基准环境的理论，然后用足用参数来评价不同污染物的环境影响。阐述了火电厂系统、标准参考环境和安全基准环境三者之间的关系。     

Multi-criteria GIS-based siting of an incineration plant for municipal solid waste

Siting a municipal solid waste (MSW) incineration plant requires a comprehensive evaluation to identify the best available location(s) that can simultaneously meet the requirements of regulations and minimise economic, environmental, health, and social costs. A spatial multi-criteria evaluation methodology is presented to assess land suitability for a plant siting and applied to Santiago Island of Cape Verde. It combines the analytical hierarchy process (AHP) to estimate the selected evaluation criteria weights with Geographic Information Systems (GIS) for spatial data analysis that avoids the subjectivity of the judgements of decision makers in establishing the influences between some criteria or clusters of criteria. An innovative feature of the method lies in incorporating the environmental impact assessment of the plant operation as a criterion in the decision-making process itself rather than as an a posteriori assessment. Moreover, a two-scale approach is considered. At a global scale an initial screening identifies inter-municipal zones satisfying the decisive requirements (socio-economic, technical and environmental issues, with weights respectively, of 48%, 41% and 11%). A detailed suitability ranking inside the previously identified zones is then performed at a local scale in two phases and includes environmental assessment of the plant operation. Those zones are ranked by combining the non-environmental feasibility of Phase 1 (with a weight of 75%) with the environmental assessment of the plant operation impact of Phase 2 (with a weight of 25%). The reliability and robustness of the presented methodology as a decision supporting tool is assessed through a sensitivity analysis. The results proved the system effectiveness in the ranking process.     

火电烟气脱硫效率低的常见原因分析及对策

随着最严环保标准的出台及监管力度加大，对脱硫等环保设施的可靠性提出了更高要求。针对当前脱硫系统关键指标-脱硫效率，系统剖析了脱硫输入、运行参数、关键设备及仪表等诸方面影响脱硫效率的常见原因，并提出了相应的对策。     

Simulation of the flue gas cleaning system of an RDF incineration power plant

Because of the stringent pollutant emission standards introduced with the European Union guidelines for waste incineration, it is very important to optimize the flue gas cleaning systems which are able to result in a low environmental impact according to the emission limits. In this paper a thermochemical model has been proposed for the simulation of the flue gas cleaning system of an RDF incineration plant. The model simulates the operation of the flue-gas treatment section and the combustion section by using a simplified approach. The combustion includes the grate incinerator and the post-combustion chamber, while the cleaning section includes the NO(x) reduction process (urea injection) and the scrubbing of SO(2) and HCl (Ca(OH)(2) as sorbent). The modelling has been conducted by means of ASPEN PLUS code. The simulation results have been validated with the operating data. The model proposed by the authors can be a useful tool in both evaluating the efficiency of the gas cleaning system by verifying the environmental pollution of an incinerator power plant in nominal operating conditions and in forecasting the efficiency of the cleaning system in off-design operating conditions.     

炼油废水处理装置提标改造

对某炼油厂废水处理装置进行提标改造。在原炼油废水处理流程的基础上将接触氧化池改造为移动床生物膜反应器（MBBR）,将斜板沉淀池改换为高密度沉淀池,分别为新增曝气生物滤池（BAF）、催化臭氧氧化等深度处理工艺。改造后装置运行平稳,出水各项指标的6个月平均值：COD 25.2 mg/L,ρ（NH₃-N） 1.3 mg/L,TN 12.6 mg/L,TP 0.11 mg/L,满足《石油炼制工业污染物排放标准》（GB 31570—2015）的排放要求。改造后每年COD和NH₃-N消减分别约为240 t和44 t,环境效益显著。     

Environmental impact assessment of a WtE plant after structural upgrade measures

The study focuses on analysing the evolution of environmental impacts caused by a medium–large Italian WtE plant before and after revamping and maintenance operations, with the aim of providing an evaluation of how much these structural upgrade measures may affect the total environmental performance.LCA methodology was applied for the modelling and comparison of six WtE scenarios, each describing the main structural upgrades carried out in the plant over the years 1996–2011. The comparison was conducted by adopting 1 ton of MSW as the functional unit, and the net contribution from energy recovery to power generation was distinguished by defining consistent national grid electricity mixes for every year considered. The Ecoindicator99 2.09 impact assessment method was used to evaluate the contribution to midpoint and endpoint categories (e.g. carcinogens, respiratory inorganics and organics, climate change, damage to human health). Lastly, the “Pedigree quality matrix” was applied to verify the reliability and robustness of the model created.As expected, the results showed better environmental scores after both the implementation of new procedures and the integration of operations. However, while a net reduction of air emissions seems to be achievable through dedicated flue gas treatment technologies, outcomes underscored potentials for improving the management of bottom ash through the adoption of alternative options aimed to use that solid residue mainly as filler, and to decrease risks from its current disposal in landfill. If the same effort that is put into flue gas treatment were devoted to energy recovery, the targets for the WtE plant could be easily met, achieving a higher sustainability. This aspect is even more complex: national policies for implementing greener and renewable energy sources would result in a lower impact of the national energy mix and, hence, in a lower net avoided burden from energy recovery.The study confirmed the expected improvements, indicating quantitatively the lower environmental impact resulting from structural upgrade operations in a WtE plant. Furthermore, the work highlights the importance of considering the evolution of the national energy mix in LCA studies, especially during the present years of transition from fossil fuels to renewable sources.     

火电厂建立ISO14001环境管理体系的工作内容

阐述了火电厂建立ISO14001环境管理体系工作的详细内容及其工作重点，并指出做好此项工作应注意的事项。     

石景山电厂1号炉电除尘器技术改造

石号山电厂1号炉配套的电除尘器，虽然一直能达到设计时的保证效率值，但不能满足现今的环保要求。在结构、资金等受到限制的条件下，挖掘现有设备潜力，制定了经济、合理的改造方案，取得了预定的效果，收尘效率达到了99．91％以上，为同类电除尘器的改造积累了经验。     

Life Cycle Assessment of the MBT plant in Ano Liossia, Athens, Greece

The aim of this paper is the application of Life Cycle Assessment to the operation of the MBT facility of Ano Liossia in the region of Attica in Greece. The region of Attica is home to almost half the population of Greece and the management of its waste is a major issue. In order to explicitly analyze the operation of the MBT plant, five scenarios were generated. Actual operation data of the MBT plant for the year 2008 were provided by the region of Attica and the LCA modeling was performed via the SimaPro 5.1 software while impact assessment was performed utilizing the Eco-indicator’99 method.The results of our analysis indicate that even the current operation of the MBT plant is preferable to landfilling. Among the scenarios of MBT operation, the one with complete utilization of the MBT outputs, i.e. compost, RDF, ferrous and non-ferrous metals, is the one that generates the most environmental gains. Our analysis indicates that the exploitation of RDF via incineration is the key factor towards improving the environmental performance of the MBT plant. Our findings provide a quantitative understanding of the MBT plant. Interpretation of results showed that proper operation of the modern waste management systems can lead to substantial reduction of environmental impacts and savings of resources.     

Removal of mercury using processes involving sulfuric acid during zinc production in an imperial smelting process (ISP) plant

Journal of Material Cycles and Waste Management - Mercury emissions from non-ferrous metal industries are a major environmental concern. Because of the large differences in mercury emission factors...     

Recycling of combined coal-biomass ash from electric power plant waste as a cementitious material: characteristics and improvement

Combined coal-biomass ash has an enormous impact on environmental quality near electric power plants. This paper describes an alternative to disposal in which the ash is used to produce cementitious materials. Ash was obtained from combustion of coal and biomass containing four mass ratios of anthracite, bitumen, rice husks, and eucalyptus bark. The cement-forming properties were systematically characterized including compressive strength development, durability, and expansion in water. The ash samples were ground to increase the specific surface area, and then used to partially replace ASTM Type I Portland cement in mixtures containing 15, 30, or 45 % ash by mass. The water-binder material's (Portland cement with or without combined coal-biomass ash) ratios (w/c) were held constant at 45, 55, or 65 % by mass. Types A, B, and D ash behaved similarly, while the properties of type C ash were slightly different. Increasing the ash fraction in Portland cement mixtures increased the water requirement and resulted in lower compressive strength. Thorough mechanical grinding reduced the porosity and significantly enhanced the material properties.     

Thermal process of fluff: Preliminary tests on a full-scale treatment plant

Until only recently fluff has been largely disposed of in controlled landfill sites. However, in Europe environmental regulations, including the EU Landfill Directive 1999/31/EC and ELV (End of Life Vehicle) Directive 2000/53/EC, have dramatically increased the pressure on all stakeholders to develop alternative solutions. As increasingly stringent legislation forces Shredder Residues (SR) to be diverted from landfilling, newly developed technologies will be in a position to compete for the market value of disposing of the waste.However, the fluff waste stream is so variable that it cannot be automatically assumed that processes developed for one type of fluff will prove to be suitable for other fluff streams. This situation has contributed towards convincing stakeholders to withhold investment funds or delay taking decisions as to how best to proceed; as a consequence, very few technologies have been fully developed on a commercial basis. It is of particular interest therefore that commercial alternatives to be used in dealing with this complex waste stream should be identified.The present paper illustrates the findings of a full-scale thermal treatment performed on SR samples obtained from various shredding plants. The outcome of the study provides an important contribution towards assessing the feasibility and reliability of the process, thus constituting a basic prerequisite for process performance evaluation. The full-scale plant, designed for the thermo-valorization of tyres, was purpose-modified to allow for fluff combustion. Three different fluff compositions (car fluff with different percentage of shredding, whites and 100% car fluff) were taken into consideration. Both the raw samples and solid products were thoroughly characterized. Combustion emissions were continuously analyzed during the test period, alternatively operating for tyre and fluff combustion. Classification of combustion residues for landfill disposal was carried out indicating only 2% (ashes) as hazardous waste. Preliminary results, obtained from a unsophisticated thermodynamic analysis of the process, indicated a value of 0.61 for energy efficiency parameter calculated in accordance with the Directive 2008/98/EC.To conclude, the thermal treatment investigated may be deemed an appropriate technique for use in managing fluff. Indeed, values obtained for all organic and inorganic contaminants released into the atmosphere were lower than legal limits prescribed, and a significant energy content was recovered from waste fractions.     

AERMOD在火电大气环评中出现山地极端异常值的分析

利用AERMOD模型预测了我国东部某电厂＂上大压小＂项目污染物排放对评价区域大气环境的影响。结果发现,受厂址东南山体影响,SO2、NO2小时最大落地浓度分别为环境空气质量二级标准的552.00%和1223.33%,NO2日均最大落地浓度为环境空气质量二级标准的117.50%。据统计,SO2小时贡献值超过标准时次为1次;NO2小时贡献值超过标准时次为5次,超标发生的概率均较低。预测超标原因主要与预测模型中烟羽遇到山体后的烟羽分层简化处理与实际烟羽运行状况存在一定差异有关。     

The environmental fate of heavy metals arising from a MSW incineration plant

Pollutant fluxes from municipal solid waste (MSW) incinerators are of a certain concern, especially gaseous emissions from the stack, which constitute the major effluent from the plant. In this work, heavy metals in soil and vegetation sampled in different sites around the plant are compared with those found in the gaseous emissions from an incinerator: the suspected source and environmental matrices are observed together, in order to detect a possible relationship of cause and effect, using statistical methods. The incinerator examined, regarding dimension and technology, can be considered a typical Italian one. Heavy metal concentrations in soil and vegetation show a clear dependence on sampling year; similar behaviour can be found in emission fluxes referring to the same years. A dependence on the distance from the incinerator is also apparent. This study supplies a methodological approach that can be easily extended and applied to other suspected contamination sources.