Biofabrication of calcium phosphate nanoparticles using the plant Mimusops elengi

Nanoparticles are now widely applied in products. The synthesis of nanomaterials using biological materials is an emerging field, notably for medical applications because biologically derived compounds can be safe. For instance, calcium phosphate is a natural biomineral that possesses an excellent biocompatibility due to its chemical similarity to human hard tissue such as bone and teeth. Here, we synthesized calcium phosphate nanoparticles by using bark extract of Spanish cherry (Mimusops elengi). Calcium phosphate nanoparticles showed an absorbance at 275 nm by UV–visible analysis and particle size of 25 nm by nanoparticle tracking and analysis. Fourier transform infrared spectroscopy revealed the presence of aromatic amines as a capping and reducing agent. Transmission electron microscopy showed the presence of polydispersed spherical nanoparticles with an average size of 50 nm. Measurements of zeta potential revealed the stability of the synthesized calcium phosphate nanoparticles. These particles demonstrated antibacterial activity against Streptococcus mutans, Staphylococcus aureus and Escherichia coli. We conclude that the synthesis of calcium phosphate nanoparticles by using a M. elengi is easy, eco-friendly and scalable.     

Acute toxicity of copper oxide nanoparticles to Daphnia magna under different test conditions

The acute toxicity of monodispersed 6 nm and <100 nm poly-dispersed copper oxide nanoparticles toward Daphnia magna was assessed using 48 h immobilization tests. CuSO₄ was used as a reference. Four different exposure conditions were tested, to study whether the toxicity of the nanoparticle suspensions changed in a way similar to what is known for dissolved Cu: first in ISO standard test conditions (pH 7.8), second with slight acidity (pH 6.5), third in the presence of citric acid, and fourth in the presence of humic acid. For all four exposure conditions, the toxicity of Cu employed in the three forms followed the same sequence, i.e., CuSO₄ > monodispersed 6 nm CuO ? poly-dispersed CuO. The toxicity of all Cu forms decreased from pH 6.5, ? pH 7.8, > pH 7.8 + citric acid, to ? pH 7.8 + humic acid. This pattern is in agreement with concentrations of Cu²⁺ calculated using the equilibrium model MINTEQ. These findings show that the acute toxicity of copper oxide nanoparticles is governed by test water composition and the chemical species Cu²⁺.     

Silver nanoparticle antimicrobial activity explained by membrane rupture and reactive oxygen generation

Silver nanoparticles are widely used as antimicrobial compounds based on empirical observations. However, there is few knowledge on the mechanism ruling the antimicrobial activity and toxicity of Ag nanoparticles. Here, we investigated this mechanism. Nano-Ag was synthesised by thermal co-reduction. Mutagenicity analysis was performed using Salmonella typhimurium histidine auxotrophic strains TA 98 and TA 100 at nano-silver concentrations of 100 to 500 µg per plate. Dose-dependent analysis for reactive oxygen species generation has been performed using 2,7-dichlorofluorescein diacetate dye. Membrane integrity has been analyzed at 260 nm, before and after treatment. We also used scanning electron microscopy, membrane permeabilization test, and superoxide formation determinations. Results show that the average particle size of Ag nanoparticle is 60.4 ± 3.8 nm. The minimum inhibitory concentration of Ag nanoparticles for E.coli is 30 µg/mL; the minimum bactericidal concentration is 40 µg/mL. Ames mutagenicity tests showed negative results, which may be explained by the antimicrobial activity of nano-silver. Bacterial inner wall were indeed ruptured, and cytoplasmic content was released after 5 min of treatment in a dose-dependent manner. We thus propose that reactive oxygen generation and alteration of membrane integrity and permeability are the major mechanism of antimicrobial activity of nano-silver.     

Large-scale green synthesis of Cu nanoparticles

This article reports a novel, eco-friendly herbal method to synthesize Cu nanoparticles in large scales. Cu nanoparticles are an alternative to Ag and Au nanoparticles and have potential applications in many industrial areas. Many synthetic routes have been documented for the preparation of copper nanoparticles, but very few routes are eco-friendly and large-scale. We report here the preparation of Cu nanoparticles from aqueous CuSO₄ using non-toxic and inexpensive materials like curd, milk, and herbal extracts such as tamarind and lemon juice as capping agents. X-ray diffraction and transmission electron microscopy show that produced particles are nanocrystalline copper 20–50 nm in size with a face-centered cubic structure. Fourier-transformed infrared spectroscopy evidences the role of organic acids in the capping process. The novelty of this work is the synthesis of Cu nanoparticles from CuSO₄ without electricity and using non-toxic, cheap capping agents.     

Efficient oxidation of sulfides into sulfoxides catalyzed by a chitosan–Schiff base complex of Cu(II) supported on supramagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles

Sulfoxides are versatile synthetic intermediates for the preparation of biological products. Therefore, there is a need for efficient methods to oxidize sulfides into sulfoxides. Such oxidation may be catalyzed by magnetic nanocatalysts due to their good stability, easy synthesis, high surface area, low toxicity and easy separation by magnetic forces. Here we prepared a nanocatalyst by immobilization of the chitosan–Schiff base complex on supramagnetic Fe₃O₄ nanoparticles. The chitosan–Schiff base complex has been previously prepared by functionalization of chitosan with 5-bromosalicylaldehyde and metalation with copper(II) acetate. The catalyst was characterized by Fourier transform infrared, powder X-ray diffraction, transmission electron microscope, scanning electron microscopy, energy-dispersive X-ray spectroscopy and thermogravimetric analysis. Results show that the Fe₃O₄ nanoparticles and nanocatalyst were spherical in shape with an average size of 20 nm. Upon the covalently anchoring of chitosan–Schiff base Cu complex on the magnetic Fe₃O₄ nanoparticles, the average size increased to 60 nm. The prepared Fe₃O₄–chitosan–Schiff base Cu complex catalyzed very efficiently the oxidation of sulfides to sulfoxides with 100 % selectivity in all cases under green reaction conditions and excellent yields. Additionally, ease of recovery and reusability up to four cycles without noticeable loss of catalytic activity make the present protocol beneficial from industrial and environmental viewpoint.     

Cytotoxicity and cell membrane depolarization induced by aluminum oxide nanoparticles in human lung epithelial cells A549

The cytotoxicity of 13 and 22 nm aluminum oxide (Al₂O₃) nanoparticles was investigated in cultured human bronchoalveolar carcinoma-derived cells (A549) and compared with 20 nm CeO₂ and 40 nm TiO₂ nanoparticles as positive and negative control, respectively. Exposure to both Al₂O₃ nanoparticles for 24 h at 10 and 25 µg mL^?1 doses significantly decreased cell viability compared with control. However, the cytotoxicity of 13 and 22 nm Al₂O₃ nanoparticles had no difference at 5–25 µg mL^?1 dose range. The cytotoxicity of both Al₂O₃ nanoparticles were higher than negative control TiO₂ nanoparticles but lower than positive control CeO₂ nanoparticles (TiO₂ < Al₂O₃ < CeO₂). A real-time single cell imaging system was employed to study the cell membrane potential change caused by Al₂O₃ and CeO₂ nanoparticles using a membrane potential sensitive fluorescent probe DiBAC₄(3). Exposure to the 13 nm Al₂O₃ nanoparticles resulted in more significant depolarization than the 30 nm Al₂O₃ particles. On the other hand, the 20 nm CeO₂ particles, the most toxic, caused less significant depolarization than both the 13 and 22 nm Al₂O₃. Factors such as exposure duration, surface chemistry, and other mechanisms may contribute differently between cytotoxicity and membrane depolarization.     

Tolerance of juvenile barnacles (Amphibalanus improvisus) to warming and elevated pCO2

We investigated the impacts of warming and elevated pCO₂ on newly settled Amphibalanus improvisus from Kiel Fjord, an estuarine ecosystem characterized by significant natural pCO₂ variability. In two experiments, juvenile barnacles were maintained at two temperature and three pCO₂ levels (20/24 °C, 700–2,140 μatm) for 8 weeks in a batch culture and at four pCO₂ levels (20 °C, 620–2,870 μatm) for 12 weeks in a water flow-through system. Warming as well as elevated pCO₂ hardly affected growth or the condition index of barnacles, although some factor combinations led to temporal significances in enhanced or reduced growth with an increase in pCO₂. While warming increased the shell strength of A. improvisus individuals, elevated pCO₂ had only weak effects. We demonstrate a strong tolerance of juvenile A. improvisus to mean acidification levels of about 1,000 μatm pCO₂ as is already naturally experienced by the investigated barnacle population.     

Evidence of new particle formation during post monsoon season over a high-altitude site of the Western Ghats,India

The formation of ultrafine particles, their growth, and associated characteristic features has been studied during new particle formation events over a high-altitude station of the Western Ghats during the 2014 post-monsoon season. Most of the events were observed during noon time where particle bursts in the nucleation-mode size range from 5 to 25 nm followed by sustained growth in size. This phenomenon persists for ～4–8 h with a growth rate of 1–2 nm h^–1. Peak concentrations of nucleation-mode particles during the event generally vary from 2300 to 5000 cm^–3. The mean growth rate is 1.4 ± 0.42 nm h^–1, particle formation rate is 1.14 ± 0.22 cm^–3 s^–1, coagulation sink is 0.35 ± 0.22 cm^–3 s^–1, and condensational sink is 15.4 ± 2.6?×?10^–3 s^–1. All these values are comparable with earlier results from Indian region. Comparison of size-segregated particle number concentration during days of new particle formation events and those without new particle formation were carried out showing a distinct variation in nucleation and Aitken mode with least variability associated with the accumulation mode.     

Genotoxic effects of Ag2S and CdS nanoparticles in blue mussel (Mytilus edulis) haemocytes

The use of functionalised metal sulphide nanoparticles (NPs) for nanoremediation and biomedical application is rapidly increasing, which could lead to significant inputs into the marine environment. The potential impact of some NPs on marine organisms is still poorly understood. In the present paper the genotoxic potential of Ag₂S and CdS NPs on Mytilus edulis haemocytes was assessed. MPEG-SH (thiol-terminated methyl polyethylene glycol), was used as capping agent to avoid NPs agglomeration. TEM analysis showed that the Ag₂S NPs size was 13±7 nm, whereas CdS quantum dots had an average diameter of 4±1 nm. DNA integrity was evaluated by Comet assay following exposure to increasing concentration series (0.01–10 mg/L). Both silver and cadmium NPs showed genotoxic effects at the highest dose. MPEG-SH was also found to exert a weak genotoxic activity, suggesting that at least part of the genotoxic potential of functionalised NPs on mussel cells might be attributable to the capping agent. These results confirm the genotoxic potential of Ag₂S NPs for mussel cells and demonstrated, for the first time, that CdS NPs is genotoxic in a marine organism.     

Chronic study of arsenic trioxide-induced hepatotoxicity in relation to arsenic liver accumulation in rats

This study measured activities of serum enzymes alkaline phosphatase, acid phosphatase, glutamic oxaloacetic transaminase (SGOT), and glutamic pyruvic transaminase (SGPT), markers of liver function in albino rats after continuous ingestion of arsenic trioxide (As₂0₃). For the study, treated animals were given AS₂O₃ (0.2 mg/100 g/day) orally for 180 days. After the completion of treatment, the blood was collected for the estimation of serum biochemical markers. The results obtained were compared with control group. Data showed a significant increase in SGOT and SGPT activity after 60 days of As₂0₃ administration. The level of alkaline phosphatase and acid phosphatase increased significantly after 90 and 120 days, respectively. Since the elevation of these serum enzymes is an indicator of hepatic damage, data indicate that As₂O₃ produces hepatotoxicity. When taken continuously, arsenic was also deposited in liver and blood and affected the enzymatic pathways. Total accumulated arsenic was determined by HG-AAS at 193.7 nm.     

Determination of F2-isoprostanes in cultured human lung epithelial cells after exposure to metal oxide and silica nanoparticles by high-performance liquid chromatography/tandem mass spectrometry

The environmental impact of nanotechnology has caused a great concern. Many in vitro studies showed that many types of nanoparticles were cytotoxic. However, whether these nanoparticles caused cell membrane damage was not well studied. F₂-isoprostanes are specific products of arachidonic acid peroxidation by nonenzymatic reactive oxygen species and are considered as reliable biomarkers of oxidative stress and lipid peroxidation. In this article, we investigated the cytotoxicity of different nanoparticles and the degree of cellular membrane damage by using F₂-isoprostanes as biomarkers after exposure to nanoparticles. The human lung epithelial cell line A549 was exposed to four silica and metal oxide nanoparticles: SiO₂ (15 nm), CeO₂ (20 nm), Fe₂O₃ (30 nm), and ZnO (70 nm). The levels of F₂-isoprostanes were determined by using high-performance liquid chromatography/mass spectrometry. The F₂-isoprostanes’ peak was identified by retention time and molecular ion m/z at 353. Oasis HLB cartridge was used to extract F₂-isoprostanes from cell medium. The results showed that SiO₂, CeO₂, and ZnO nanoparticles increased F₂-isoprostanes levels significantly in A549 cells. Fe₂O₃ nanoparticle also increased F₂-isoprostanes level, but was not significant. This implied that SiO₂, CeO₂, ZnO, and Fe₂O₃ nanoparticles can cause cell membrane damage due to the lipid peroxidation. To the best of our knowledge, this is the first report on the investigation of effects of cellular exposure to metal oxide and silica nanoparticles on the cellular F₂-isoprostanes levels.     

TiO<Subscript><Emphasis Type="Bold">2</Emphasis></Subscript> nanoparticles – Relationship between dispersion preparation method and ecotoxicity in the algal growth test

PurposeLittle is known about the ecotoxicity of nanomaterials and there are no specific guidelines for sample preparation and testing. We set out to establish whether the method used to prepare TiO₂ dispersions had a significant impact on aquatic ecotoxicity. We also followed the formation of agglomerates during the incubation period.MethodsWe applied the algal growth inhibition test (OECD test guideline no. 201). Dispersions were prepared by stirring and/or ultrasonication for different durations, and by filtration according to an OECD procedure recommended for testing difficult substances.ResultsSamples stirred for 7?d were not toxic, but EC₂₀ values could be calculated for all the other treatments. Shorter treatments generated EC₂₀ values in the range 1–27?mg/L. Only the shortest treatment (1 min stirring, 1 min ultrasonication) produced an unusually high EC₂₀ value, indicating low toxicity. Development of agglomerate size and of toxicity depends on the nanoparticles. We found that ecotoxicity was predominantly caused by a fraction of nanoparticles and agglomerates obtained by passing dispersions through a 0.22-µm filter.ConclusionsWe propose a short treatment regime to generate the most relevant ecotoxicity data for TiO₂, for example stirring for 1?min followed by 3 min ultrasonication. Until more data concerning the ecotoxicity of different fractions are available, we recommend the testing of unfiltered dispersions rather than filtrates. Relating ecotoxicity to the total hydrodynamic surface of the nanomaterials rather than concentration does not seem to improve the accuracy of ecotoxicity assessments using the algal growth inhibition test.     

Nanostructured semiconducting materials for efficient hydrogen generation

Massive production of hydrogen by water decomposition triggered by a solar light active photocatalyst is a major objective in chemistry and a promising avenue to overcome the global energy crisis. The development of efficient, stable, economically viable and eco-friendly photocatalysts for hydrogen production is a challenging task. This article reviews the use of nanocomposite in three combinations: metal oxide–metal oxide semiconductor, metal–metal oxide semiconductor and metal chalcogenide–metal oxide core–shell nanostructures. These core–shell structures occur in two forms: a simple form where the photocatalyst is either in the core or the shell or in a more complex system where the core–shell structure comprises a co-catalyst deposited on a semiconducting material. We discuss the design, synthesis and development of semiconductor-based nanocomposite photocatalysts for hydrogen production. The major points are the role of catalytic active sites, the chemical nature of sacrificial agents, the effect of light sources, the variable light intensity and the energy efficiency calculation. For TiO₂-based nanocomposites, the metal oxide or metal co-catalyst loading of 1.0–3.0 wt% was optimal. TiO₂ nanotube–CuO hybrid nanocomposites produce 1,14,000 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\), whereas TiO₂/Au nanocomposites display 1,60,000 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\). For core–shell catalysts, a shell thickness of 2–20 nm was found for the best activity, and its performance is as follows: (a) CdS–NiO system produces around 19,949 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\) and (b) CuO–Cr₂O₃ as co-catalyst immobilized on TiO₂ system produces around 82,390 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\).     

Higher Cd adsorption on biogenic elemental selenium nanoparticles

Cadmium (Cd) is a carcinogenic metal contaminating the environment and ending up in wastewaters. There is therefore a need for improved methods to remove Cd by adsorption. Biogenic elemental selenium nanoparticles have been shown to adsorb Zn, Cu and Hg, but these nanoparticles have not been tested for Cd removal. Here we studied the time-dependency and adsorption isotherm of Cd onto biogenic elemental selenium nanoparticles using batch adsorption experiments. We measured ζ-potential values to assess the stability of nanoparticles loaded with Cd. Results show that the maximum Cd adsorption capacity amounts to 176.8 mg of Cd adsorbed per g of biogenic elemental selenium nanoparticles. The ζ-potential of Cd-loaded nanoparticles became less negative from ?32.7 to ?11.7 mV when exposing nanoparticles to an initial Cd concentration of 92.7 mg L^?1. This is the first study that demonstrates the high Cd uptake capacity of biogenic elemental selenium nanoparticles, of 176.8 mg g^?1, when compared to that of traditional adsorbents such as carboxyl-functionalized activated carbon, of 13.5 mg g^?1. An additional benefit is the easy solid–liquid separation by gravity settling due to coagulation of Cd-loaded biogenic elemental selenium nanoparticles.     

Future ocean acidification will be amplified by hypoxia in coastal habitats

Ocean acidification is elicited by anthropogenic carbon dioxide emissions and resulting oceanic uptake of excess CO₂ and might constitute an abiotic stressor powerful enough to alter marine ecosystem structures. For surface waters in gas-exchange equilibrium with the atmosphere, models suggest increases in CO₂ partial pressure (pCO₂) from current values of ca. 390 μatm to ca. 700–1,000 μatm by the end of the century. However, in typically unequilibrated coastal hypoxic regions, much higher pCO₂ values can be expected, as heterotrophic degradation of organic material is necessarily related to the production of CO₂ (i.e., dissolved inorganic carbon). Here, we provide data and estimates that, even under current conditions, maximum pCO₂ values of 1,700–3,200 μatm can easily be reached when all oxygen is consumed at salinities between 35 and 20, respectively. Due to the nonlinear nature of the carbonate system, the approximate doubling of seawater pCO₂ in surface waters due to ocean acidification will most strongly affect coastal hypoxic zones as pCO₂ during hypoxia will increase proportionally: we calculate maximum pCO₂ values of ca. 4,500 μatm at a salinity of 20 (T = 10 °C) and ca. 3,400 μatm at a salinity of 35 (T = 10 °C) when all oxygen is consumed. Upwelling processes can bring these CO₂-enriched waters in contact with shallow water ecosystems and may then affect species performance there as well. We conclude that (1) combined stressor experiments (pCO₂ and pO₂) are largely missing at the moment and that (2) coastal ocean acidification experimental designs need to be closely adjusted to carbonate system variability within the specific habitat. In general, the worldwide spread of coastal hypoxic zones also simultaneously is a spread of CO₂-enriched zones. The magnitude of expected changes in pCO₂ in these regions indicates that coastal systems may be more endangered by future global climate change than previously thought.     

Titanium dioxide nanoparticles induce bacterial membrane rupture by reactive oxygen species generation

Nano-titania is widely used in the food industry due to its efficient antimicrobial activity. However, the mechanism of microbial toxicity of nano-titania is poorly known. Here, nano-TiO₂ has been fabricated by microwave-irradiation chemistry, a new method, and then tested for antimicrobial activity. Mutagenicity of nano-TiO₂ was evaluated using Salmonella typhimurium histidine-auxotrophic strains. The reactive oxygen generation test was performed using 2,7-dichlorofluorescein diacetate dye. To test membrane permeabilization, E. coli cultures were grown in nutrient broth at an optical density of 0.3–0.5 at 610 nm, harvested by centrifugation at 11,000g for 10 min, washed and resuspended in 0.5 % NaCl solution. We also analyzed superoxide formation and membrane integrity, and we used scanning electron microscopy. Results show that nano-TiO₂ has a minimum inhibitory concentration of 15 µg/mL, and a minimum bactericidal concentration of 20 µg/mL for E. coli. The bacterial inner wall was ruptured, and cytoplasmic content was released after 5 min of treatment in a dose-dependent manner. Notably, superoxide formation was not observed, which establishes the fact that reactive oxygen generation and alteration of membrane integrity, as well as permeability, is the major mechanism of antimicrobial activity of nano-TiO₂.     

Discovery of nano-sized gold particles in natural plant tissues

Biological effects of nanoparticles have attracted widespread attention. However, the interaction between plants and nanoparticles remains unclear. The purpose of this study was to investigate characteristics of nano-sized metal particles in two representative plant species, Erigeron canadensis and Boehmeria nivea, in the Guangdong Province, China. The stems of the plants were sliced and placed on Ni–C grids for field-emission transmission electron microscopy (TEM). The metal-bearing nanoparticles were further analysed for their size, shape, composition, content and other characteristics using X-ray energy spectrum analysis, scanning TEM and selected-area electron diffraction pattern. The results revealed that the plants contain nano-sized Au-bearing particles with a diameter of 5–50 nm, ellipsoid, spherical and bone-rod shapes or irregular morphology with smooth edges. These nanoparticles primarily consisted of Au, Cu, O and Cl. The discovery of Au-bearing nanoparticles in natural plant tissues is of great significance for biological nanoscience. Here, we discuss the function and absorption mechanism of Au-bearing nanoparticles in plants and present the influence of the discovery of Au-bearing nanoparticles in natural plants.     

Real-time monitoring of nanoparticle retention in porous media

Nanoparticles are not specifically targeted in conventional treatment schemes; consequently, typical wastewater treatment systems are ineffective for nanoparticles removal. With rapidly increasing concern over their health effects, improved understanding of nanoparticle transport and retention in porous media filters is critical because of its application in new wastewater treatment methods and for assessment of the fate of the discharged nanoparticles in soil. In this study, a unique and robust integrated method is developed and validated. Experimentally, this approach uses an on-line, real-time, and in situ method for measuring nanoparticle retention dynamics, eliminating the laborious and less accurate sampling and off-line analysis. The data analysis part is a process simulator which provides both kinetic properties of the retention process as well as the overall capacity and loading. This technique is validated by application to the transport and retention of TiO₂ nanoparticles in two vastly different porous filtration media—activated carbon and sand. TiO₂ retained concentrations ranged from 0.24 to 0.37 mg g^?1 for activated carbon and 0.01–0.014 mg g^?1 for sand. The integrated method presented here is useful for both comparison of the filtration effectiveness of various porous materials as well as for process optimization and scale-up for industrial applications.     

The synergistic effects of increasing temperature and CO2 levels on activity capacity and acid–base balance in the spider crab, Hyas araneus

With global climate change, ocean warming and acidification occur concomitantly. In this study, we tested the hypothesis that increasing CO₂ levels affect the acid–base balance and reduce the activity capacity of the Arctic spider crab Hyas araneus, especially at the limits of thermal tolerance. Crabs were acclimated to projected oceanic CO₂ levels for 12 days (today: 380, towards the year 2100: 750 and 1,120 and beyond: 3,000 μatm) and at two temperatures (1 and 4 °C). Effects of these treatments on the righting response (RR) were determined (1) at acclimation temperatures followed by (2) righting when exposed to an additional acute (15 min) heat stress at 12 °C. Prior to (resting) and after the consecutive stresses of combined righting activity and heat exposure, acid–base status and lactate contents were measured in the haemolymph. Under resting conditions, CO₂ caused a decrease in haemolymph pH and an increase in oxygen partial pressure. Despite some buffering via an accumulation of bicarbonate, the extracellular acidosis remained uncompensated at 1 °C, a trend exacerbated when animals were acclimated to 4 °C. The additional combined exposure to activity and heat had only a slight effect on blood gas and acid–base status. Righting activity in all crabs incubated at 1 and 4 °C was unaffected by elevated CO₂ levels or acute heat stress but was significantly reduced when both stressors acted synergistically. This impact was much stronger in the group acclimated at 1 °C where some individuals acclimated to high CO₂ levels stopped responding. Lactate only accumulated in the haemolymph after combined righting and heat stress. In the group acclimated to 1 °C, lactate content was highest under normocapnia and lowest at the highest CO₂ level in line with the finding that RR was largely reduced. In crabs acclimated to 4 °C, the RR was less affected by CO₂ such that activity caused lactate to increase with rising CO₂ levels. In line with the concept of oxygen and capacity limited thermal tolerance, all animals exposed to temperature extremes displayed a reduction in scope for performance, a trend exacerbated by increasing CO₂ levels. Additionally, the differences seen between cold- and warm-acclimated H. araneus after heat stress indicate that a small shift to higher acclimation temperatures also alleviates the response to temperature extremes, indicating a shift in the thermal tolerance window which reduces susceptibility to additional CO₂ exposure.     

Facile synthesis of Pd nanoparticles on SiO2 for hydrogenation of biomass-derived furfural

This report shows that furfuryl alcohol can be selectively produced from the hydrogenation of furfural using supported Pd nanoparticles. Furfuryl alcohol is widely used as solvent and chemical intermediate for the synthesis of fine chemicals. Here, various Pd nanoparticles supported on mesoporous SiO₂ (Pd/SiO₂) were simply fabricated by a wet impregnation using palladium nitrate. Physical properties of Pd/SiO₂ nanoparticles were studied by X-ray diffraction, energy-dispersive, X-ray analysis, N₂ adsorption and desorption isotherms and transmission electron microscopy. Results show a high dispersion of Pd nanoparticles with small size. Pd nanoparticles catalyzed very efficiently the hydrogenation of furfural to furfuryl alcohol with 76 % selectivity under mild conditions. Overall, the catalyst developed could find applications for the production of chemicals from biomass.