Sustainable development of building of extensive roof greening in Taiwan

Taiwan government specifies that the average roof thermal transmittance must be less than 0.8 (w/(m²·k)) for the design of all residential buildings in order to implement the policy of saving energy. However, self-disciplined architects practice the design of aesthetic roof to blend in with green landscape so that they urgently expect the academia to provide roof greening technical information to support their idea of designing green roofs for residential buildings. In this research, a single-family housing unit is used for investigating the possibility of applying extensive roof greening to achieve building sustainable development. The experiment tasks focused on the soil denudation caused by rainwater washing and replenishing the soil carbon by irrigating the soil with gray water. Using tap water to irrigate the green roof for 12, 16, and 14 weeks causes nitrogen, phosphate, and potassium, respectively, to be reduced to less than the original levels, respectively. Applying gray water to irrigate the green roof soil will raise the soil fertility by improving nitrogen and phosphate but not obvious for potassium.     

Evaluation of alternative water sources for commercial buildings: A case study in Brisbane,Australia

Commercial buildings are central to cities and contribute significantly to the urban demand for natural resources, including freshwater. Green building benchmarking tools include more efficient water use as key indicator of sustainability. This paper explores options for substituting mains drinking water with an alternative, non-potable water source on a fit for purpose basis. The research findings are based on a monitoring study of a commercial building in Brisbane, Australia that is harvesting rainwater for meeting non-potable water demand. The results demonstrated that the system is only achieving moderate reliability in meeting demand due to operational problems. The case study analysis has highlighted the need to include validation and monitoring to ensure the system is operating as per design intent. The paper also investigates the potential of other local, non-potable water sources for high-rise commercial buildings, in particular air conditioning condensate and groundwater inflow to a basement wet well. The paper concludes by comparing the advantages and disadvantages of different local water sources which highlights the need to undertake a site specific investigation to identify a suitable alternative water source, which considers O&M complexity and the capacity of facilities management.     

Roofing as a source of nonpoint water pollution

Sixteen wooden structures with two roofs each were installed to study runoff quality for four commonly used roofing materials (wood shingle, composition shingle, painted aluminum, and galvanized iron) at Nacogdoches, Texas. Each roof, either facing NW or SE, was 1.22 m wide x 3.66 m long with a 25.8% roof slope. Thus, there were 32 alternatively arranged roofs, consisting of four roof types x two aspects x four replicates, in the study. Runoff from the roofs was collected through galvanized gutters, downspouts, and splitters. The roof runoff was compared to rainwater collected by a wet/dry acid rain collector for the concentrations of eight water quality variables, i.e. Cu(2+), Mn(2+), Pb(2+), Zn(2+), Mg(2+), Al(3+), EC and pH. Based on 31 storms collected between October 1997 and December 1998, the results showed: (1) concentrations of pH, Cu, and Zn in rainwater already exceed the EPA freshwater quality standards even without pollutant inputs from roofs, (2) Zn and Cu, the two most serious pollutants in roof runoff, exceeded the EPA national freshwater water quality standards in virtually 100% and more than 60% of the samples, respectively, (3) pH, EC, and Zn were the only three variables significantly affected by roofing materials, (4) differences in Zn concentrations were significant among all roof types and between all roof runoff and rainwater samples, (5) although there were no differences in Cu concentrations among all roof types and between roof runoff and rainwater, all means and medians of runoff and rainwater exceeded the national water quality standards, (6) water quality from wood shingles was the worst among the roof types studied, and (7) although SE is the most frequent and NW the least frequent direction for incoming storms, only EC, Mg, Mn, and Zn in wood shingle runoff from the SE were significantly higher than those from the NW; the two aspects affected no other elements in runoff from the other three roof types. Also, Zn concentrations from new wood-shingle roofs were significantly higher than those from aged roofs of a previous study. The study demonstrated that roofs could be a serious source of nonpoint water pollution. Since Zn is the most serious water pollutant and wood shingle is the worst of the four roof types, using less compounds and materials associated with Zn along with good care and maintenance of roofs are critical in reducing Zn pollution in roof runoff.     

Rainwater reuse supply and demand response in urban elementary school of different districts in Taipei

This study primarily assesses rainwater supply and demand for Taipei City elementary school to develop a method to derive the rainwater reuse system. This work will help planners build water reuse systems for the sites, and facilitate the water demand of school. This study also analyzes rainfall records from fifteen weather stations in Taipei City to evaluate the rainfall changes in the region's morphology, and measures the rainfall supply in the sub-district of Taipei. The effect of water demand factors is also analyzed with linear regressions applied to estimate the change in monthly water demand for Taipei elementary schools. This work assumes that 35% of total water demand can replaced with rainwater. This work creates an active model for comparisons of each Taipei elementary site rainwater supply trend, demand drift, and maximum rainwater use percentage based on the rainwater reuse system. The efficacy of implementing rainwater reuse in Taipei is identified.     

PRELIMINARY OBSERVATIONS ON WATER QUALITY OF STORM RUNOFF FROM FOUR SELECTED RESIDENTIAL ROOFS1

ABSTRACT: Storm runoff from four characteristic types of residential roofs and incident rainwater were monitored for 47 storm events over a six-month period at Nacogdoches, Texas, to study water quality conditions for 20 element and four chemical variables. The total element concentration in storm runoff from each roof type was greater than that of rainwater in the open. Differences in element concentrations in storm runoff among the four roof types were statistically significant (α≤ 0.05) with the differences for the wood shingle roof being the greatest and that for terra cotta clay roof being the least. The median concentrations of four element variables exceeded the Texas surface water quality standards, while 12 variables exceeded the standards at least one time in all samples collected. Zinc concentrations violated the Standard ranging from 85.7 percent of the samples for the wood shingle roof to 66.0 percent for the composite shingle, the greatest exceedances of all 24 variables studied. Storm characteristics and gutter maintenance level had some effects on these water quality conditions. The study suggested that roof types can be important to water pollution management programs. More detailed studies on roof water quality in major municipalities are required.     

Potential for rainwater use in high-rise buildings in Australian cities

Rainwater is a traditional but underutilized water resource that has today had a resurgence due to the worldwide water crisis. This paper demonstrates the outcomes of research on the feasibility of rainwater use in high-rise residential envelopes for four Australian cities of Melbourne, Sydney, Perth and Darwin. Different climate patterns and various levels of water demand management were established for determination of storage dimensions; annual tank water use; reduction in both imported water flow and stormwater disposal; and water spillage from tanks. High level water demand management was a profoundly effective tool for reducing potable water supply, especially in combination with rainwater use. The economic feasibility of rainwater use systems were estimated; with Sydney having the shortest payback period compared to other cities either both with 3A rated appliances (8.6 years) or 5A ones installed (10.4 years). That was due to the higher and more consistent rainfall in Sydney. An outcome of this study was that Sydney was likely most suited to rainwater use, followed by Perth, Darwin, and then Melbourne. The objective of this study was to fill in the gap in estimating feasibility of rainwater use in various Australian cities. This investigation endeavors to provide assistance to water authorities and urban planners of Australian cities with the consideration of the potential of rainwater harvesting.     

Establishing Green Roof Infrastructure Through Environmental Policy Instruments

Traditional construction practices provide little opportunity for environmental remediation to occur in urban areas. As concerns for environmental improvement in urban areas become more prevalent, innovative practices which create ecosystem services and ecologically functional land cover in cities will be in higher demand. Green roofs are a prime example of one of these practices. The past decade has seen the North American green roof industry rapidly expand through international green roof conferences, demonstration sites, case studies, and scientific research. This study evaluates existing international and North American green roof policies at the federal, municipal, and community levels. Green roof policies fall into a number of general categories, including direct and indirect regulation, direct and indirect financial incentives, and funding of demonstration or research projects. Advantages and disadvantages of each category are discussed. Salient features and a list of prompting standards common to successfully implemented green roof strategies are then distilled from these existing policies. By combining these features with data collected from an experimental green roof site in Athens, Georgia, the planning and regulatory framework for widespread green roof infrastructure can be developed. The authors propose policy instruments be multi-faceted and spatially focused, and also propose the following recommendations: (1) Identification of green roof overlay zones with specifications for green roofs built in these zones. This spatial analysis is important for prioritizing areas of the jurisdiction where green roofs will most efficiently function; (2) Offer financial incentives in the form of density credits and stormwater utility fee credits to help overcome the barriers to entry of the new technology; (3) Construct demonstration projects and institutionalize a commitment greening roofs on publicly-owned buildings as an effective way of establishing an educated roofing industry and experienced installers for future green roof construction.     

Water Supply and Stormwater Management Benefits of Residential Rainwater Harvesting in U.S. Cities

This article presents an analysis of the projected performance of urban residential rainwater harvesting systems in the United States (U.S.). The objectives are to quantify for 23 cities in seven climatic regions (1) water supply provided from rainwater harvested at a residential parcel and (2) stormwater runoff reduction from a residential drainage catchment. Water‐saving efficiency is determined using a water‐balance approach applied at a daily time step for a range of rainwater cistern sizes. The results show that performance is a function of cistern size and climatic pattern. A single rain barrel (190 l [50 gal]) installed at a residential parcel is able to provide approximately 50% water‐saving efficiency for the nonpotable indoor water demand scenario in cities of the East Coast, Southeast, Midwest, and Pacific Northwest, but <30% water‐saving efficiency in cities of the Mountain West, Southwest, and most of California. Stormwater management benefits are quantified using the U.S. Environmental Protection Agency Storm Water Management Model. The results indicate that rainwater harvesting can reduce stormwater runoff volume up to 20% in semiarid regions, and less in regions receiving greater rainfall amounts for a long‐term simulation. Overall, the results suggest that U.S. cities and individual residents can benefit from implementing rainwater harvesting as a stormwater control measure and as an alternative source of water.     

Optimizing angles of rooftop photovoltaics,ratios of solar to vegetated roof systems,and economic benefits,in Portland,Oregon, USA

This study analyzed insolation data to account for multiple scattering in calculating optimal tilt angles for stationary and seasonally moving photovoltaics on three different roof types in the US Pacific Northwest: vegetated roofs, white roofs, and dark roofs. Using these results, we modeled the energy savings for vegetated roofs and roofs covered in varying numbers of photovoltaic panels. We then calculated the net present value, internal rate of return, and other economic measures for all possible combinations of covering rooftops in mixes of photovoltaic arrays and vegetation, accounting for installation costs, proposed carbon taxes, stormwater management discounts, and other relevant factors. Our results quantify how, in the US Pacific Northwest and similar locations, photovoltaics produce higher returns on investment than do vegetated roofs for new buildings, while vegetated roofs produce better returns on investment than do photovoltaics for older buildings. This is important because in many areas, some buildings have photovoltaics when a vegetated roof would have been more cost and energy efficient, while other buildings have vegetated roofs when photovoltaics would have been more cost and energy efficient. Potential applications include modifying incentive programs and other policies to account properly for building age, use, and other relevant factors to ensure building owners make the most energy-efficient decisions between photovoltaic versus vegetated roof installation. Our research also demonstrates how positive returns on investment can be realized in the US Pacific Northwest and similar regions through vegetated roofs and photovoltaics provided they are each installed optimally.     

Experience with Rainwater Catchment Systems in Kenya and Botswana

Rainwater catchment is a valuable but frequently neglected alternative a domestic water supply in the developing world. In the arid and semi-arid areas of Kenya and Botswana a number of water supply programmes which depend wholly or in part on rainwater catchment are currently being implemented. This paper discusses this experience and describes the various construction techniques being used. It has been found that rainwater catchments has a number of very unique advantages and relatively few disadvantages. It is argued that more consideration should be given to the inclusion of rainwater catchment systems, especially in rural water supply programmes.     

Implications of Upstream Flow Availability for Watershed Surface Water Supply across the Conterminous United States

Although it is well established that the availability of upstream flow (AUF) affects downstream water supply, its significance has not been rigorously categorized and quantified at fine resolutions. This study aims to fill this gap by providing a nationwide inventory of AUF and local water resource, and assessing their roles in securing water supply across the 2,099 8‐digit hydrologic unit code watersheds in the conterminous United States (CONUS). We investigated the effects of river hydraulic connectivity, climate variability, and water withdrawal, and consumption on water availability and water stress (ratio of demand to supply) in the past three decades (i.e., 1981–2010). The results show that 12% of the CONUS land relied on AUF for adequate freshwater supply, while local water alone was sufficient to meet the demand in another 74% of the area. The remaining 14% highly stressed area was mostly found in headwater areas or watersheds that were isolated from other basins, where stress levels were more sensitive to climate variability. Although the constantly changing water demand was the primary cause of escalating/diminishing stress, AUF variation could be an important driver in the arid south and southwest. This research contributes to better understanding of the significance of upstream–downstream water nexus in regional water availability, and this becomes more crucial under a changing climate and with intensified human activities.     

Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia

Rainwater tanks for larger roof areas need optimisation of tank size, which is often not carried out before installation of these tanks. This paper presents a case study of rainwater tank evaluation and design for large roof areas, located in Melbourne, Australia, based on observed daily rainfall data representing three different climatic regimes (i.e. dry average, and wet years). With the aim of developing a comprehensive Decision Support Tool for the performance analysis and design of rainwater tanks, a simple spreadsheet based daily water balance model is developed using daily rainfall data, contributing roof area, rainfall loss factor, available storage volume, tank overflow and irrigation water demand. In this case study, two (185 m³ and 110 m³) underground rainwater tanks are considered. Using the developed model, effectiveness of each tank under different climatic scenarios are assessed. The analysis shows that both the tanks are quite effective in wet and average years, however less effective in dry years. A payback period analysis of the tanks is preformed which reveals that the total construction cost of the tanks can be recovered within 15-21 years time depending on tank size, climatic conditions and future water price increase rates. For the tanks, a relationship between water price increase rates and payback periods is developed. The study highlights the need for detailed optimisation and financial analysis for large rainwater tanks to maximise the benefits.     

Cost-efficiency of rainwater harvesting strategies in dense Mediterranean neighbourhoods

Rainwater harvesting (RWH) presents many benefits for urban sustainability and it is emerging as a key strategy in order to cope with water scarcity in cities. However, there is still a lack of knowledge regarding the most adequate scale in financial terms for RWH infrastructures particularly in dense areas. The aim of this research is to answer this question by analysing the cost-efficiency of several RWH strategies in urban environments. The research is based on a case study consisting of a neighbourhood of dense social housing (600 inhabitants/ha) with multi-storey buildings. The neighbourhood is located in the city of Granollers (Spain), which has a Mediterranean climate (average rainfall 650 mm/year). Four strategies are defined according to the spatial scale of implementation and the moment of RWH infrastructure construction (building/neighbourhood scale and retrofit action vs. new construction). Two scenarios of water prices have been considered (current water prices and future increased water prices under the EU Water Framework Directive). In order to evaluate the cost-efficiency of these strategies, the necessary rainwater conveyance, storage and distribution systems have been designed and assessed in economic terms through the Net Present Value within a Life Cycle Costing approach. The pipe water price that makes RWH cost-efficient for each strategy has been obtained, ranging from 1.86 to 6.42€/m³. The results indicate that RWH strategies in dense urban areas under Mediterranean conditions appear to be economically advantageous only if carried out at the appropriate scale in order to enable economies of scale, and considering the expected evolution of water prices. However, not all strategies are considered cost-efficient. Thus, it is necessary to choose the appropriate scale for rainwater infrastructures in order to make them economically feasible.     

Evaluating the impact of green roof evapotranspiration on annual building energy performance

The performance of the building envelope predominantly determines the ultimate energy performance throughout the lifecycle of a building. A sustainable alternative to enhance roof performance while limiting heat flux through a roof is integrating passive techniques such as green roof. Particularly, green roof performance is sensitive to local climate. The main objective of this study was to evaluate the evapotranspiration effect of an extensive green roof on annual energy consumption of an office building in relation to the humid continental climate of Republic of Korea. The dynamic behavior of green roof and building energy performance were investigated through a parametric simulation method using green roof module in EnergyPlus coupled with jEPlus. Structural data of the reference building and ASHARE 90.1-2007 operational schedules were used as inputs for baseline building model while inputs for the green roof module were based on experimental data sets. Due to the influence of the humid conditions and local wind current on the evapotranspiration process, it was generally found that high leaf area index (LAI) reduced cooling energy demand and somewhat reduced heating energy demand as well; corresponding to the highest daily evapotranspiration fluxes of 4.79 mm day^?1 in summer and 1.80 mm day^?1 in winter. Increasing LAI from 20% to 100% cover increased evapotranspiration flux by 10.4% in summer and 80.2% in winter. Thus to minimize energy losses in winter, foliage cover must be carefully considered. Within limitations specified, the overall annual building energy consumption deceased by 90.9 GJ (3.7%).     

Simulation based programming for optimization of large-scale rainwater harvesting system: Malaysia case study

Large scale rainwater harvesting (LSRWH) is a promising alternative to address security and flood issues in urban areas. The development and planning of a LSRWH for an eco-community involves comprehensive site-planning, systems planning and design, which includes the rainwater source collection (roof) to the storage tank, the distribution and allocation system. This paper describes a new technique for designing a LSRWH for a community of 200 houses with an average of 4 persons per house and an average total daily water demand of 160 m³. It was found that the optimal size storage tank for a 20,000 m² roof area is 160 m³ with a 60% reliability. The application of this model to the case study revealed a significant water saving up to 58% .The total cost for this system is 443,861 USD over a life-span of 25 years.     

Characterizing Rainwater Harvesting Performance and Demonstrating Stormwater Management Benefits in the Humid Southeast USA

Rainwater harvesting (RWH) has traditionally been implemented in areas with (semi) arid climates or limited access to potable water supplies; however, recent droughts in the humid southeastern United States have led to increased implementation of RWH systems. The objectives of this study were twofold: (1) present usage characteristics and performance results for four RWH systems installed in humid North Carolina (NC) as compared with systems located in arid/semiarid regions and (2) identify system benefits and modifications that could help improve the performance of RWH systems installed in humid regions of the world. For this study four RWH systems were installed in NC. Their usage was monitored for at least one year and compared with similar studies. Results revealed that dedicated water uses and usage characteristics for RWH systems in NC differed from those previously reported in the literature. Two of the systems studied met 100 and 61% of the potable water demand with designated uses of animal kennel flushing and greenhouse irrigation, respectively. The designated uses yielding the greatest potable water replacement were often seasonal or periodic, thus necessitating the need for identifying and implementing secondary objectives for these systems, namely, stormwater management. Otherwise, the expense and effort required to implement RWH systems in humid areas will most likely preclude their use.     

MEETING FUTURE PUBLIC WATER SUPPLY NEEDS: A SOUTHWEST PERSPECTIVE1

ABSTRACT: Most southwestern cities were founded along rivers or in areas having springs or readily available ground water. Because of the generally sparse precipitation, the renewable fresh water supply in the Southwest is smaller than most other areas of the United States. Despite the arid climate, water use has increased rapidly, first in the form of irrigation, and more recently the use in cities. This has caused extensive development of local water resources and overdraft of ground water basins in some areas. It is difficult to implement new local supplies and importation projects due to a myriad of environmental and legal constraints and a general shortage of public funds. Various opportunities and plans for water management, both on the demand and supply sides, are discussed. Evolving water strategies in four metropolitan areas - El Paso, Albuquerque, Las Vegas, and Phoenix - and issues regarding the Central Arizona Project are presented.     

Analytic Modeling of Rainwater Harvesting in the Brazilian Semiarid Northeast

During the past two decades, government efforts to provide water access to rural communities in Brazil's semiarid Northeast region have focused on building systems to capture and store rainwater, most importantly through the One Million Cisterns Program (P1MC). This article presents an analytic model based on daily precipitation data to evaluate the sustainability of rainwater capture. Application of this model to analysis of the P1MC reveals the heterogeneous climate in this region causes large spatial variability in the effectiveness of this program. In addition, the size of the area of capture, the run‐off coefficient of the roofs, and the amount of first‐flush diversion also have important effects. This analysis demonstrates while rainwater capture can offer sufficient water for drinking, as a stand‐alone solution it cannot meet P1MC objectives of guaranteeing sustainable and universal access to water for drinking, cooking, and basic hygiene in all regions and years.     

Green roof stormwater retention: effects of roof surface, slope, and media depth

Urban areas generate considerably more stormwater runoff than natural areas of the same size due to a greater percentage of impervious surfaces that impede water infiltration. Roof surfaces account for a large portion of this impervious cover. Establishing vegetation on rooftops, known as green roofs, is one method of recovering lost green space that can aid in mitigating stormwater runoff. Two studies were performed using several roof platforms to quantify the effects of various treatments on stormwater retention. The first study used three different roof surface treatments to quantify differences in stormwater retention of a standard commercial roof with gravel ballast, an extensive green roof system without vegetation, and a typical extensive green roof with vegetation. Overall, mean percent rainfall retention ranged from 48.7% (gravel) to 82.8% (vegetated). The second study tested the influence of roof slope (2 and 6.5%) and green roof media depth (2.5, 4.0, and 6.0 cm) on stormwater retention. For all combined rain events, platforms at 2% slope with a 4-cm media depth had the greatest mean retention, 87%, although the difference from the other treatments was minimal. The combination of reduced slope and deeper media clearly reduced the total quantity of runoff. For both studies, vegetated green roof systems not only reduced the amount of stormwater runoff, they also extended its duration over a period of time beyond the actual rain event.     

Impacts of Changes in Precipitation Amount and Distribution on Water Resources Studied Using a Model Rainwater Harvesting System

Water supply reliability is expected to be affected by both precipitation amount and distribution changes under recent and future climate change. We compare historical (1951‐2010) changes in annual‐mean and annual‐maximum daily precipitation in the global set of station observations from Global Historical Climatology Network and climate models from the Inter‐Sectoral Impact Model Intercomparison Project (ISI‐MIP), and develop the study to 2011‐2099 for model projections under high radiative forcing scenario (RCP8.5). We develop a simple rainwater harvesting system (RWHS) model and drive it with observational and modeled precipitation. We study the changes in mean and maximum precipitation along with changes in the reliability of the model RWHS as tools to assess the impact of changes in precipitation amount and distribution on reliability of precipitation‐fed water supplies. Results show faster increase in observed maximum precipitation (10.14% per K global warming) than mean precipitation (7.64% per K), and increased reliability of the model RWHS driven by observed precipitation by an average of 0.2% per decade. The ISI‐MIP models show even faster increase in maximum precipitation compared to mean precipitation. However, they imply decreases in mean reliability, for an average 0.15% per decade. Compared to observations, climate models underestimate the increasing trends in mean and maximum precipitation and show the opposite direction of change in reliability of a model water supply system.