Power generation by high head water in a building using micro hydro turbine—a greener approach

Demand for green energy production is arising all over the world. A lot of emphasis is laid in making the buildings green. Even a small amount of energy savings made contribute to saving the environment. In this study, an idea is proposed and studied to extract power from the high head water in the pipelines of a building. A building of height 15 m is considered for this study. Water flowing in the pipe has sufficient energy to run a micro hydro turbine. The feasibility of producing electrical energy from the energy of pipe water is found. The motivation is to find the feasibility of generating power using a low-cost turbine. The experimental setup consists of micro turbine of 135 mm diameter coupled to a 12-V DC generator; LEDs and resistors are employed to validate the results. The theoretical calculations were presented using the fundamental equations of fluid mechanics. The theoretical results are validated using experimental and numerical results using CFD simulation. In addition, exergy analysis has been carried out to quantify the irreversibilities during the process in the system.     

Life cycle implications of urban green infrastructure

Low Impact Development (LID) is part of a new paradigm in urban water management that aims to decentralize water storage and movement functions within urban watersheds. LID strategies can restore ecosystem functions and reduce runoff loadings to municipal water pollution control facilities (WPCF). This research examines the avoided energy and greenhouse gas (GHG) emissions of select LID strategies using life cycle assessment (LCA) and a stochastic urban watershed model. We estimate annual energy savings and avoided GHG emissions of 7.3 GJ and 0.4 metric tons, respectively, for a LID strategy implemented in a neighborhood in New York City. Annual savings are small compared to the energy and GHG intensity of the LID materials, resulting in slow environmental payback times. This preliminary analysis suggests that if implemented throughout an urban watershed, LID strategies may have important energy cost savings to WPCF, and can make progress towards reducing their carbon footprint.     

Urbanisation and greening of Indian cities: Problems,practices, and policies

Progress of the Indian economy is threatened by the impact of climate change. Generation of urban heat islands (UHIs), waning of urban green cover, increase in carbon emissions and air pollution deteriorate the living environment. Rise in urban temperatures and heat stress induced mortality remain major concerns. Although the National Action Plan on Climate Change emphasises the national missions of ‘enhanced energy efficiency’, and ‘green India’, little research has been devoted to explore the passive cooling potential of urban greenery in India, thus lending uniqueness to this study. The manifestations of unplanned urban development (UHIs, escalated carbon emissions, air pollution) are discussed and corroborated with identification of contributory factors. Contemporary greening practices and bye-laws in four major Indian cities (New Delhi, Pune, Chennai, and Visakhapatnam) are analysed and compared with global best practices. The findings are used to propose planning guidelines which are expected to assist in consolidating natural sustainability of emerging economies.     

Evaluating pollution damage function through carbon pricing,renewable energy demand,and cleaner technologies in China: blue versus green economy

Climate change and increased greenhouse gas emissions boost the global average temperature to less than 2°C, which is the estimated breakeven point. The globe is moving into blue pollution economies as the environmental sustainability objective becomes more distorted. The study looked at three United Nations Sustainable Development Goals, namely (i) affordable and clean energy; (ii) industry, innovation, and infrastructure; and (iii) climate change, to see how far the Chinese economy has progressed toward green and clean development strategy. In the context of China, the “pollution damage function” was intended to refer to carbon damages related to carbon pricing, technological variables, sustained economic growth, incoming foreign investment, and green energy. The data was collected between 1975 and 2019 and analyzed using various statistical approaches. The results of the autoregressive distributed lag model suggest that carbon taxes on industrial emissions reduce carbon damages in the short and long run. Furthermore, a rise in inbound foreign investment and renewable energy demand reduces carbon damages in the short term, proving the “pollution halo” and “green energy” hypotheses; nonetheless, the results are insufficient to explain the stated results in the long run. In the long run, technology transfers and continued economic growth are beneficial in reducing carbon damages and confirming the potential of cleaner solutions in pollution mitigation. The causal inferences show the one-way relationship running from carbon pricing and technology transfer to carbon damages, and green energy to high-technology exports in a country. The impulse response estimates suggested that carbon tax, inbound foreign investment, and technology transfers likely decrease carbon damages for the next 10 years. On the other hand, continued economic growth and inadequate green energy sources are likely to increase carbon pollution in a country. The variance decomposition analysis suggested that carbon pricing and information and communication technology exports would likely significantly influence carbon damages over time. To keep the earth’s temperature within the set threshold, the true motivation to shift from a blue to a green economy required strict environmental legislation, the use of green energy sources, and the export of cleaner technologies.

Graphical abstract

Source: Authors’ self-extract

     

Shade trees reduce building energy use and CO2 emissions from power plants

Urban shade trees offer significant benefits in reducing building air-conditioning demand and improving urban air quality by reducing smog. The savings associated with these benefits vary by climate region and can be up to $200 per tree. The cost of planting trees and maintaining them can vary from $10 to $500 per tree. Tree-planting programs can be designed to have lower costs so that they offer potential savings to communities that plant trees. Our calculations suggest that urban trees play a major role in sequestering CO2 and thereby delay global warming. We estimate that a tree planted in Los Angeles avoids the combustion of 18 kg of carbon annually, even though it sequesters only 4.5-11 kg (as it would if growing in a forest). In this sense, one shade tree in Los Angeles is equivalent to three to five forest trees. In a recent analysis for Baton Rouge, Sacramento, and Salt Lake City, we estimated that planting an average of four shade trees per house (each with a top view cross section of 50 m2) would lead to an annual reduction in carbon emissions from power plants of 16,000, 41,000, and 9000 t, respectively (the per-tree reduction in carbon emissions is about 10-11 kg per year). These reductions only account for the direct reduction in the net cooling- and heating-energy use of buildings. Once the impact of the community cooling is included, these savings are increased by at least 25%.     

Influence of residual carbon on the decomposition process of PCDD/Fs in MSWI fly ash

In heating treatment of fly ash to reduce PCDD/Fs, cooling process is important to inhibit de novo formation of PCDD/Fs. In this study, assuming that residual carbon is the dominant factor of de novo synthesis, the relation between PCDD/Fs and residual carbon was examined. Firstly, by using MSWI fly ash which was treated in an actually operated facility, both the content of PCDD/Fs and residual carbon were decreased as heating temperature increased. At temperatures higher than 400 degrees C, the reduction rate of residual carbon was higher than 20% and more than 95% of PCDD/Fs was decomposed. In order to simulate a heating treatment process, fly ash was heated at different temperatures and gas atmospheres, oxygen or nitrogen. Heated fly ash was placed for 2 h at 300 degrees C in oxygen to promote de novo synthesis, or cooled immediately. As a result, good correlation between PCDD/Fs and residual carbon was found, therefore it was shown experimentally that residual carbon was the main factor for PCDD/Fs formation by de novo synthesis in fly ash.     

Industrialization,urbanization, and carbon emission efficiency of Yangtze River Economic Belt—empirical analysis based on stochastic frontier model

Carbon emission efficiency directly determines the level of green economic development. Based on the panel data of China’s Yangtze River Economic Belt (YEB) from 2008 to 2017, this paper uses the stochastic frontier analysis (SFA) model to analyze the overall carbon emission efficiency level, influencing factors, and changing trends, with a view to discussing the relationship between economic development and carbon emission efficiency. The results suggest, first, the overall carbon emission efficiency of the YEB is on an upward trend, but there is still much room for improvement. Second, the impact of industrialization and urbanization on carbon emission efficiency follows a U-shaped. As industrialization and urbanization progress, the impact on carbon emission efficiency shows a downward and then upward trend. Third, due to the rebound effect, technological progress has a slight negative impact on carbon emission efficiency. Energy consumption structure, government intervention, and foreign trade are all negative incentive factors. Therefore, efforts to improve carbon emission efficiency in the YEB should focus on transforming the economic growth model, adjusting the industrial structure, improving the energy consumption structure, and innovating green technology. The research results can provide a reference for the government policymakers to develop a green economy.

     

微生物生理群在猪粪秸秆高温堆肥碳氮转化中的作用

在自制的强制通风静态堆肥反应箱中,猪粪与秸秆以鲜重7∶1的比例进行了堆肥化实验,在堆制的23 d里根据堆温变化分阶段采集堆肥样品,利用MPN法测定了堆料中纤维素分解菌和氮素微生物生理群的数量变化,同时测定了相应的碳、氮含量。结果表明,纤维素分解菌在稳定腐熟阶段较多,对于后期有机碳的降解和腐殖质含量的增大起了很大的作用,在堆制的23 d里,腐殖质增加了2.4%。整个堆制过程中,氨化细菌的数量最大且与氨气释放浓度和铵态氮含量呈显著正相关,都在高温期增加,降温期后减少,氨化细菌的数量在高温期的增加率远高于降温期后的减少率,而铵态氮在高温期的增加率远低于在降温后期的减少率,铵态氮总体上减少了74.1%;亚硝化细菌数量与硝态氮呈正相关;反硝化细菌数量在降温期上升幅度较大,堆制结束时为堆制初期的13倍,且与堆肥中硝态氮含量呈正相关;硝态氮含量增加了87.5%;堆肥后期硝态氮的增加可能与堆肥中存在能进行硝化作用的反硝化细菌有关。固氮菌数量在堆制结束时达堆制初期的2.61倍,主要在降温期增加较多,对堆肥中有机氮的形成起很大作用。     

Applicability of energy-positive net-zero water management in Alaska: technology status and case study

Challenges of water and wastewater management in Alaska include the potential need for above-grade and freeze-protected piping, high unit energy costs and, in many rural areas, low population density and median annual income. However, recently developed net-zero water (NZW), i.e., nearly closed-loop, direct potable water reuse systems, can retain the thermal energy in municipal wastewater, producing warm treated potable water without the need for substantial water re-heating, heat pumping or transfer, or additional energy conversion. Consequently, these systems are projected to be capable of saving more energy than they use in water treatment and conveyance, in the temperate USA. In this paper, NZW technology is reviewed in terms of potential applicability in Alaska by performing a hypothetical case study for the city of Fairbanks, Alaska. Results of this paper study indicate that in municipalities of Alaska with local engineering and road access, the use of NZW systems may provide an energy-efficient water service option. In particular, case study modeling suggests hot water energy savings are equivalent to five times the energy used for treatment, much greater savings than in mid-latitudes, due largely to the substantially higher energy needed for heating water from a conventional treatment system and lack of need for freeze-protected piping. Further study of the applicability of NZW technology in cold regions, with expanded evaluation in terms of system-wide lifecycle cost, is recommended.     

Evaluation of Method 25 Nonmethane Organic Analyzer Design

Under contract to the U.S. Environmental Protection Agency, Research Triangle Institute has been conducting research to improve the precision, accuracy and limit of detection attainable with the EPA Method 25 nonmethane organic (NMO) analyzer. In Method 25, volatile organic carbon (VOC) samples are collected by drawing gas from an emitting source through a dry ice cooled sample trap and into an evacuated collection tank. The hydrocarbon concentration emitted from the source is determined on a per-carbon basis by catalytically converting the trap and tank sample fractions to CO₂ and quantitating the amount of CO₂ produced using the NMO analyzer. A reduction catalyst evaluation led to the selection of an NMO analyzer reduction catalyst which operates at a moderate temperature and displays no appreciable effect on peak shape. A gas chromatographlc column system which provides better permanent gas separation and hydrocarbon quantitation was also selected for use in the NMO analyzer.     

The Development of a Charging/Collecting Device for High Resistivity Dust Using Cooled Electrodes

A charging/collecting device for high-resistivity fly ash has been developed which controls back ionization by cooling the collector electrode internally with water. The device consists of parallel 6.0 cm pipes with corona wires suspended between the pipes. The pipes provide a simple means of interfacing with a cooling water system and also minimizing the collector area needing to be cooled. By cooling the pipes with 38°C (100°F) water, back ionization is eliminated and average field strengths of 7 kV/cm can be achieved with fly ash having a resistivity > 10¹² ω-cm. Results of tests on an actual flue gas stream and plans for future testing are described. Initial tests using heated instead of cooled electrodes are described as well as other tests that lead to the present design. The results of tests with the heated electrode show the kind of improvements in performance that can be obtained when resistivity is controlled in only a small collection area.     

Temporal and spatial characteristics of green total factor productivity in energy-intensive industry in China

China’s energy-intensive industry (EII) is characterized by high pollution, high energy consumption, and high emissions. It is essential to boost this sector’s green total factor productivity (GTFP) in order to support the sustainable development of the China’s economy and help to achieve the objective of carbon neutrality. This work measures the evolution of GTFP in EII and its subsectors at provincial and regional level from 2001 to 2019, identifies the causes of these changes, and finally analyzes the particular spatial aggregation effect of GTFP in EII. It is discovered that the GTFP of China’s EII has significantly improved throughout the sample period and exhibits a spatial structure of “high in the coastal areas and low in the west and center.” The main driver of GTFP growth for China’s EII and its subsectors was technological advance. Smelting and pressing of ferrous metals (SPFM) and smelting and pressing of non-ferrous metals (SPNM) were the industries with the most significant technological progress. Remarkable spatial correlations existed among the GTFP of EII at provincial level. The GTFP values of EII in coastal regions were relatively high and tend to benefit the adjacent provinces but there was a polarization effect in the Middle Reaches of Yellow River (YR). Finally, policy implications are provided for the sustainable development of China’s EII.

     

Carbon Sequestration Function of Check-Dams: A Case Study of the Loess Plateau in China

Check-dams are the most common structures for controlling soil erosion in the Loess Plateau. However, the effect of check-dams on carbon sequestration, along with sediment transport and deposition, has not been assessed over large areas. In this study, we evaluated the carbon sequestration function of check-dams in the Loess Plateau. The results indicate that there were approximately 11 000 check-dams distributed in the Loess Plateau, with an estimate of the amount of sediment of 21 × 10⁹ m³ and a soil organic carbon storage amount of 0.945 Pg. Our study reveals that check-dams in the Loess Plateau not only conserve soil and water but also sequester carbon.     

A novel application of concentrated solar thermal energy in foundries

Scrap preheating in foundries is a technology that saves melting energy, leading to economic and environmental benefits. The proposed method in this paper utilizes solar thermal energy for preheating scrap, effected through a parabolic trough concentrator that focuses sunlight onto a receiver which carries the metallic scrap. Scraps of various thicknesses were placed on the receiver to study the heat absorption by them. Experimental results revealed the pattern with which heat is gained by the scrap, the efficiency of the process and how it is affected as the scrap gains heat. The inferences from them gave practical guidelines on handling scraps for best possible energy savings. Based on the experiments conducted, preheat of up to 160 °C and a maximum efficiency of 70 % and a minimum efficiency of 40 % could be achieved across the time elapsed and heat gained by the scrap. Calculations show that this technology has the potential to save around 8 % of the energy consumption in foundries. Cumulative benefits are very encouraging: 180.45 million kWh of energy savings and 203,905 t of carbon emissions cut per year across the globe. This research reveals immense scope for this technology to be adopted by foundries throughout the world.     

Exploring the influencing factors of carbon neutralization in Chinese manufacturing enterprises

One of the key issues facing the government in achieving carbon neutrality is what methods can be used to effectively reduce carbon emissions. Taking manufacturing enterprises as an example, this paper studies the carbon emission reduction effects of green technology innovation subsidy (GIS), carbon tax (CT), and carbon emission trading (CET). Under the background of social welfare and carbon emission reduction efficiency, we get the results of optimal carbon emission reduction measures in different environments. The results are as follows: (1) In the initial and mature stage of green technology innovation, GIS is the best choice to improve the degree of green manufacturing and maximize social welfare. CT and CET are the best choice to obtain the highest SE (carbon emission reduction efficiency). (2) In the transitional stage, CET and CT can promote the maturity of green technology. However, with the maturity of green technology, the promotion of green technology has weakened. CT is the best choice to achieve the highest SE. (3) When the carbon tax or carbon trading price is at a high or low level, raising the tax rate or carbon trading price can increase the income of enterprises. Therefore, the government should take measures according to the objectives of different stages. When the goal is to maximize social benefits, GIS is the best choice in the initial stage and transition stage, and CET or CT is the best choice in the transition stage. In the initial stage and fertilization stage, when the highest SE, CT, or CET is the best choice, while in the transition stage, CT is the best choice.

     

Green finance,technological progress,and ecological performance—evidence from 30 Provinces in China

The interaction between green finance and other factors, such as ecological environment, has been a research hotspot nowadays. Especially, the reasonable guiding of capital into energy conservation and environmental protection industries would greatly affect those factors, so as to the relation between them. This paper aimed to analyze the relationships between green finance, technological progress, and ecological performance quantitatively. The entropy method was used to respectively construct the system of index for green finance and technological progress, and index for ecological performance was measured by the super-SBM model. The panel vector autoregressive (PVAR) model was selected to empirically analyze dynamic relationships based on datasets from 30 provinces in China during 2008–2019 period. The results told that (1) from 2008 to 2019, China’s overall level of green finance, technological progress and ecological performance increased to varying degrees. Spatially, the areas with high-developed green finance greatly coincided with those such as large cities or the eastern coast that had good financial development. The distribution of technological progress index were similar, except some underdeveloped areas with relatively advanced scientific research institutes. The ecological performance, however, was high in the South and low in the north. (2) In the lag for 3 years, the influence of green finance on ecological performance in different regions was all positive for that all the coefficient symbols that passed the significance test were above 0, while that on technological progress was negative first and then positive. And the effects of technological progress on ecological performance were positive in ecological regions and negative in low ecological regions (0.0893 and -0.1211 in the case of three-stage lag respectively). (3) The contribution of green finance to ecological performance was high according to the results of variance decomposition, maintained at about 30%, and that of technological progress increased year by year (from 0.000 to 0.039). Therefore, we proposed to strengthen the development of green finance in underdeveloped regions. The emphasis should be laid on the researches and applications of green technology, the formulation of financing policies in innovation compensation and the establishment of a dynamic monitoring system for the ecological environment.

     

Improving nutrient removal while reducing energy use at three Swiss WWTPs using advanced control

Aeration consumes about 60% of the total energy use of a wastewater treatment plant (WWTP) and therefore is a major contributor to its carbon footprint. Introducing advanced process control can help plants to reduce their carbon footprint and at the same time improve effluent quality through making available unused capacity for denitrification, if the ammonia concentration is below a certain set-point. Monitoring and control concepts are cost-saving alternatives to the extension of reactor volume. However, they also involve the risk of violation of the effluent limits due to measuring errors, unsuitable control concepts or inadequate implementation of the monitoring and control system. Dynamic simulation is a suitable tool to analyze the plant and to design tailored measuring and control systems. During this work, extensive data collection, modeling and full-scale implementation of aeration control algorithms were carried out at three conventional activated sludge plants with fixed pre-denitrification and nitrification reactor zones. Full-scale energy savings in the range of 16-20% could be achieved together with an increase of total nitrogen removal of 40%.     

The role of green innovations,environmental policies and carbon taxes in achieving the sustainable development goals of carbon neutrality

The green innovations, environmental policies, and carbon taxes are the tools to achieve sustainable development goals (SDGs) in the mitigation process. This study is intended to examine the impact of innovation, carbon pricing (CTAX), environmental policies (EP), and energy consumption (ECON) on PM_2.5 and greenhouse gas (GHG) emission for Central-Eastern European countries. The panel effect during 2000–2018 is tested using a dynamic panel data model while the Granger causality approach obtains country-related outcomes. The outcomes reveal that eco-friendly innovations have a more profound effect on carbon mitigation. Environmental policies reduce emissions by 2.7% in the short run and 17.4% in the long run. Similarly, CTAX mitigates GHG emissions by 8.6% in the short-run and PM2.5 by 0.9% and 5.7% in the short and long run. However, urbanization, energy consumption and trade openness are the leading polluters in the region. The main findings remain dominant in the country-specific results and find unidirectional and bidirectional causality evidence among variables. The research concludes that green innovations and strict environmental policy can lead towards achieving sustainable development goals using carbon taxes as a tool on the way.

Graphical abstract

     

Carbon budgets for catchments across a managed landscape mosaic in southeast Sweden: contributing to the safety assessment of a nuclear waste repository

Ecosystem budgets of matter contribute to the assessment of transport and accumulation of bioavailable contaminants in a landscape, since flows of matter and energy ultimately determine the rates at which contaminants will be partitioned in the environment. This study compares ecosystem properties, such as net primary production (NPP), sequestration of matter and fluxes to food sources for humans, which are of potential interest to describe fluxes and accumulation of bioavailable radionuclides in 14 catchments within a larger catchment area in southeast Sweden. The carbon budgets, used as a proxy for organic matter, are mainly based on local estimates of pools and fluxes, which have been distributed across a landscape mosaic of different vegetation types and management regimes using a geographical information system (GIS). NPP varied by a factor close to two (432 - 709 g x Cx m(-2)x y(-1)), while net ecosystem production ranged between -124 and 159 gx C x m(-2) x y (-1) for the different catchments. Carbon sequestration mainly occurred in the vegetation while the soil organic carbon pool was mainly a source of carbon. Large herbivores consumed on average 4.5 % of the above-ground green tissue production. When arable land was present in the catchment, the flux of carbon to humans was highest from crops and, in decreasing order, milk and beef, followed by the flux from hunting and berry/fungus picking. The results can be used to estimate the potential assimilation of radionuclides in vegetation and the potential exposure to humans of bioavailable radionuclides.     

Hot filter/impinger and dilution sampling for fine particulate matter characterization from ferrous metal casting processes

A study using two stack-sampling methodologies for collecting particulate matter (PM) emissions was conducted using a hot filter followed by a cold impinger sampling train and a dilution sampler. Samples were collected from ferrous iron metal casting processes that included pouring molten iron into a sand mold containing an organic binder, metal cooling, removal of the sand from the cooled casting (shakeout), and postshakeout cooling. The shakeout process contributed more to PM emissions than the metal pouring and cooling processes. Particulate matter less than 2.5 microm in aerodynamic diameter (PM2.5) mass emissions for the entire casting cycle ranged from 3.4 to 4.7 lb/t of metal for the hot filter/impinger method and from 0.8 to 1.8 lb/t of metal for the dilution method. Most of the difference was due to PM captured by the impingers, much of which was probably dissolved gases rather than condensable vapors. Of the PM fraction captured by the impingers, 96-98% was organic in nature. The impinger PM fraction contributed 32-38% to the total suspended particle mass and caused a factor of 2-4 positive bias for PM2.5 emissions. For the pouring and cooling processes only, the factor increased to over seven times.