Isotope dilution analysis of polychlorinated biphenyls (PCBs) in transformer oil and global commercial PCB formulations by high resolution gas chromatography-high resolution mass spectrometry

Special polychlorinated biphenyls (PCBs) standards (native and isotope labeled) were analyzed by isotope dilution method using HRGC-HRMS. Multiple analysis of special PCBs standards by three different laboratories produced the relative response factors (RRFs) and relative standard deviations (RSDs %) was in the average of 0.979 and 3.86, respectively. Additionally, inter-laboratory analysis of various forms of transformer oil revealed the PCBs concentrations were in the following order; PCBs fortified transformer oil (940-1300 ng/g)>PCB polluted transformer oil (490-680 ng/g)>chemically degraded-transformer oil (480-490 ng/g) and PCBs free oil (ND-17 ng/g). Chemical degradation resulted in an order of magnitude decrease in the PCB concentrations. Specifically, higher chlorinated PCBs degraded into lower chlorinated PCBs. Also, composition of PCBs have been determined in PCB formulations from Japan (Kanechlor), Germany (Clophen), USA (Aroclor), Russia (Sovol) and Poland (Chlorofen). Major PCBs (24-PCB congeners) contributed 54-67%, 55-68%, 16-69%, 71% and 72% in Kanechlor, Clophen, Aroclor, Sovol and Chlorofen, respectively to total PCBs. The homologue pattern of Kanechlor, Aroclor and Clophen in technical fromulation was similar (e.g., Kanechlor-300 resembled to those of Clophen A-30 and Aroclor-1242). Furthermore, congener-specific distributions of major PCBs/dioxin-like PCBs and toxic equivalency quantities (TEQ) were calculated. Based on our tentative assumption calculations, cumulative production of five different technical PCB formulations, WHO-TEQ emission was estimated to be approximately 16.05 tons.     

PCB accumulation in osprey exposed to local sources in lake sediment

We examined the accumulation of PCBs in ospreys (Pandion haleaetus) that were exposed to local sediment sources. Eggs, chick plasma, and sediment samples were collected over a range of 14 km (0.2-14.2 km) from a PCB source in Sturgeon Lake, ON. Sum PCB concentrations declined in chick plasma (range 422.5-58.3 ng/g) as distance from the PCB source increased, but there was a poor relationship with sum PCBs in eggs. Both tissues indicated an Aroclor 1248/1254 source. Aroclor 1254 comprised an average of 66.9% of sum PCBs in chick plasma from Sturgeon Lake, but comprised only from 27.0 to 44.4% in plasma from other Great Lake colonies. Dietary differences among osprey colonies were not sufficient to explain the PCB patterns observed. There was weak evidence that the ability to metabolize PCBs may differ between juveniles and adults, based upon the PCB profile in eggs and chick plasma.     

Spatial distribution and source apportionment of PCBs in sediments around İzmit industrial complexes, Turkey

The spatial distribution, degree of pollution and major sources of PCBs were evaluated in surficial sediments within the heavily urbanized and industrialized ?zmit Bay and its main freshwater inputs. ΣPCB concentrations range from 2.90 to 85.4ngg(-1) in marine sediments and from ND to 47.7ngg(-1) in freshwater sediments. Results suggest that high concentrations of ΣPCBs were localized around a chlor-alkali plant and an industry that handles bulk liquid, dry and drummed chemicals, and petroleum products in the Bay. Using a chemical mass balance receptor model (CMB), major sources of PCBs in the region were investigated. The CMB model identified Aroclor 1254 and 1260 to be the major PCB sources in marine sediments and the less chlorinated Aroclor 1248 and 1242 as the major PCB sources in freshwater sediments. The potential sources for the PCBs were briefly discussed in terms of their use in various industrial applications.     

Historical reconstruction of polychlorinated biphenyl (PCB) exposures for workers in a capacitor manufacturing plant

We developed a semiquantitative job exposure matrix (JEM) for workers exposed to polychlorinated biphenyls (PCBs) at a capacitor manufacturing plant from 1946 to 1977. In a recently updated mortality study, mortality of prostate and stomach cancer increased with increasing levels of cumulative exposure estimated with this JEM (trend p values?=?0.003 and 0.04, respectively). Capacitor manufacturing began with winding bales of foil and paper film, which were placed in a metal capacitor box (pre-assembly), and placed in a vacuum chamber for flood-filling (impregnation) with dielectric fluid (PCBs). Capacitors dripping with PCB residues were then transported to sealing stations where ports were soldered shut before degreasing, leak testing, and painting. Using a systematic approach, all 509 unique jobs identified in the work histories were rated by predetermined process- and plant-specific exposure determinants; then categorized based on the jobs’ similarities (combination of exposure determinants) into 35 job exposure categories. The job exposure categories were ranked followed by a qualitative PCB exposure rating (baseline, low, medium, and high) for inhalation and dermal intensity. Category differences in other chemical exposures (solvents, etc.) prevented further combining of categories. The mean of all available PCB concentrations (1975 and 1977) for jobs within each intensity rating was regarded as a representative value for that intensity level. Inhalation (in microgram per cubic milligram) and dermal (unitless) exposures were regarded as equally important. Intensity was frequency adjusted for jobs with continuous or intermittent PCB exposures. Era-modifying factors were applied to the earlier time periods (1946–1974) because exposures were considered to have been greater than in later eras (1975–1977). Such interpolations, extrapolations, and modifying factors may introduce non-differential misclassification; however, we do believe our rigorous method minimized misclassification, as shown by the significant exposure–response trends in the epidemiologic analysis.     

Comparison of an enzyme-linked immunosorbent assay (ELISA) to gas chromatography (GC)--measurement of polychlorinated biphenyls (PCBs) in selected US fish extracts

The analysis of PCBs in fish tissues by immunoassay methods was evaluated using fish collected from a US monitoring program, the National Contaminant Biomonitoring Program of the US Department of Interior, Fish and Wildlife Service. Selected composite whole fish samples, which represented widely varying concentrations and sources of PCBs, were extracted and subjected to congener PCB analysis by gas chromatography (GC) and total PCB analysis using an ELISA (ePCBs) calibrated against technical Aroclor 1248. PCB congener patterns in these fishes were different from the patterns found in commercial Aroclors or their combinations as demonstrated by principal component analysis of normalized GC congener data. The sum of the PCB congeners measured by GC (total-PCBs) ranged from 37 to 4600 ng/g (wet weight). Concentrations of PCBs as determined by the ELISA method were positively correlated with total-PCBs and the ePCBs/total-PCBs ratios for individual samples ranged from 1 to 6. Ratios of ePCBs/total-PCBs for dilutions of Aroclors 1242, 1254, and 1260 and for matrix spikes range from 0.6 for 1242 to 2.5 for 1254 and 1260. These results suggest that higher chlorinated PCB congeners have higher affinity for the anti-PCB antibodies. Partial least squares with latent variable analysis of GC and ELISA data of selected Aroclors and fish samples also support the conclusion that ELISA derived PCB concentrations are dependent on the degree of chlorination.     

Atmospheric PCB congeners across Chicago

We have measured PCBs in 184 air samples collected at 37 sites in the city of Chicago using an innovative system of high-volume air samplers mounted on two health clinic vans. Here we describe results of sampling conducted from November 2006 to November 2007. The samples were analyzed for all 209 PCB congeners using a gas chromatograph with tandem mass spectrometry (GC-MS/MS). The ΣPCBs (sum of 169 peaks) in Chicago ranged from 75 pg m(-3) to 5500 pg m(-3) and primarily varied as a function of temperature. The congener patterns are surprisingly similar throughout the city even though the temperature-corrected concentrations vary by more than an order of magnitude. The average profile resembles a mixture of Aroclor 1242 and Aroclor 1254, and includes many congeners that have been identified as being aryl hydrocarbon receptor (AhR) agonists (dioxin-like) and/or neurotoxins. The toxic equivalence (TEQ) and neurotoxic equivalence (NEQ) in air were calculated and investigated for their spatial distribution throughout the urban-industrial complex of Chicago. The NEQ concentrations are linearly correlated with ΣPCBs while the TEQ concentrations are not predictable. The findings of this study suggest that airborne PCBs in Chicago are widely present and elevated in residential communities; there are multiple sources rather than one or a few locations of very high emissions; the emission includes congeners associated with dioxin-like and neurotoxic effects and congeners associated with unidentified sources.     

Polychlorinated biphenyls contamination in urban soil of Shanghai: level, compositional profiles and source identification

Surface soil samples taken from 55 sampling sites at the urban areas of Shanghai were collected and analyzed for the occurrence of 144 polychlorinated biphenyls (PCBs) by GC-μECD. The results showed that totally 74 PCB congeners were identified and the mean concentration of total PCBs was 3057 ng kg⁻¹ with a range of 232 to 11325 ng kg⁻¹. Compared with the related reports, the level of PCBs contamination in this study was approximately equal to the global background value in soils, but higher than Chinese background for rural and urban soils. According to the compositional profiles of PCBs homologues, a higher proportion of low chlorinated (from tri-CBs to hexa-CBs) was observed. The results indicated that PCB15 + 13, PCB18, PCB28, PCB104 + 47 and PCB153 were the most dominant congeners among the identified PCBs. Through homologues analysis, cluster analysis and principal component analysis (PCA), it was found that PCBs were stretched from mixed local sources, and appeared to be mostly originated by Aroclor 1260- and 1254-like mixtures as well as some samples influenced by Aroclor 1232 and 1242. The correlation analysis showed the relatively good correlation among the PCB homologues and soil total organic carbon (TOC), suggesting important influence of soil TOC on PCBs contamination in soil matrix in Shanghai region. The toxic equivalency (TEQ) concentrations of these six dioxin-like PCBs detected in urban soil samples range from 2.71 to 24.9 pg kg⁻¹-PCDDeq with a mean 8.18 pg kg⁻¹-PCDDeq.     

Bioaccumulation of anthropogenic contaminants by detritivorous fish in the Río de la Plata estuary: 2-Polychlorinated biphenyls

The temporal variability and bioaccumulation dynamics of individual PCBs were studied in a detritivorous fish (Sábalo: Prochilodus lineatus) collected from 1999 to 2005 in the polluted Buenos Aires coastal area. Fish muscles contain high concentrations of total PCBs (11+/-7.2, 4.6+/-3.4 or 19+/-13 microg g(-1), dry, fresh and lipid weight, respectively) reflecting chronic bioaccumulation from sewage-industrial particulates. On a temporal basis, lipid normalized PCBs concentrations peaked by the end of 2001-2002 coincident with the rainiest period over the last four decades and shortly after PCB prohibition in the country, reflecting massive discharges to the coastal ecosystem. PCB composition in fish muscles show a prevailing contribution of hexachlorobiphenyls (35+/-4.2%), followed by hepta (23+/-3.0%), penta (20+/-3.6%), tri-tetra (16+/-4.8%) and minor proportions of octa-decachlorobiphenyls (5.7+/-3.1%) similar to an Aroclor 1242-1254-1260 1:2:4 mixture. During 2001-2002 maxima fish showed an enrichment in tri-tetrachlorobiphenyls ( approximately 1242-1254-1260 1:1:1 mixture) denoting a fresher signature. Fish/settling material lipid-organic carbon accumulation factors (BSAFs: 2.4-46, average: 21+/-10) plotted against kow showed a parabolic trend (BSAFs=-0.38 log kow2 + 5.16 log kow -15.85; R2=0.46) maximizing at hexa, hepta and octachlorobiphenyl 203 with reduced bioaccumulation of a few hepta (170, 191) and most octa-decachlorobihenyls suggesting limited intestinal absorption.     

Polychlorinated biphenyls in surface sediments of Yueqing Bay, Xiangshan Bay, and Sanmen Bay in East China Sea

The spatial distribution and source of polychlorinated biphenyls (PCBs) in 30 surface sediments of Yueqing Bay, Xiangshan Bay, and Sanmen Bay in Eastern China were analysed. Total concentrations of PCBs ranged from 9.33 to 19.60 ng g⁻¹ dry weight for all the sampling stations. The observed PCB levels were lower than those in areas of high urbanisation or contamination in the bay. Low-chlorinated PCBs, dominated by tri-PCB, were identified as the prevalent contaminate of surface sediments, and the top three PCB congeners were lighter chlorinated congeners (PCB 8, PCB 18 and PCB 28). These results were in agreement with the fact that tri-PCB compounds are the dominant contaminants in China. The result of the principal component analysis revealed that all samples were similar in composition to Aroclor 1242, suggesting they might originate from electrical capacitors and transformers. The levels of PCBs were significantly correlated with the total organic carbon in the sediments.     

PCBs,PCNs, PCDD/Fs,PAHs and Cl-PAHs in air and water particulate samples--patterns and variations

Methodology for the determination of biologically active polychlorinated biphenyls (PCBs), non-ortho PCBs, polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polycyclic aromatic hydrocarbons (PAHs) was used to investigate concentrations and patterns of certain chlorinated PAH (Cl-PAH) in source related samples using synthetic reference mixtures. Thus, in addition to the above mentioned compounds, mono-heptachlorosubstituted fluorenes, phenanthrenes/anthracenes and pyrenes/fluoranthenes (Cl-PAHs) were measured in vapour and particulate air samples from urban road tunnels, samples of settling particulate matter (SPM), and in bottom sediment samples from two point source locations (pulp and paper, and Mg-plant/Fe-Mn-smelter/chlor-alkali) and in the Baltic Sea. Concentrations in air samples followed: PAHs>PCBs>PCNs>non-ortho PCBs or Cl-PAHs>PCDD/Fs. SPM samples collected at increasing distance to the urban area of Stockholm showed: PAHs>PCBs>PCNs>PCDD/Fs>non-ortho PCBs or Cl-PAHs. For all compound groups there was a tenfold (Cl-PAHs fivefold) concentration decrease in SPM samples from highest levels in the urban water area to lowest levels at a distance of 26 km from city centre. PCB profiles of SPM showed similarities with combined profiles of Aroclor 1242 and 1254. PCN profiles of SPM showed similarities with combined profiles of Halowax 1099 and 1014. A correlation with concentration of all tested Cl-PAH and their corresponding parent PAH was found only for Cl-fluorene.     

Vertical fluxes and accumulation of PCBs in coastal sediments of the Río de la Plata estuary, Argentina

Settling particles and underlying sediments collected at 1, 2.5 and 4 km along offshore transects in the urbanized sector of the Río de la Plata were analyzed to evaluate the sources and accumulation of PCBs. Total PCB concentrations range from <0.1 to 100 ng g(-1) and include variability associated to North-South and offshore gradients reflecting the impact of coastal discharges. Highest concentrations were recorded in the industrialized Central area close to Buenos Aires (61+/-37 ng g(-1) at 1 km) relative to cleaner northern stations (3.6+/-2.2 ng g(-1)) and southward sites (37+/-2.8 ng g(-1)), affected by transport of particulate PCBs by coastal currents. Sediment traps deployed in the Central area revealed large depositional fluxes of total matter (361+/-124 gm(-2)day(-1)) and PCBs (26+/-19 microg m(-2)day(-1)) and high sedimentation rates (5.0+/-1.7 cm yr(-1)). Uniform PCB concentrations (66-89 ng g(-1)) down to 20 cm in sediment cores suggest continued PCB discharges during the last 4 years. PCB composition was dominated by hexa (43+/-6.4%), hepta (23+/-5.1%) and pentachlorobiphenyls (21+/-5.5%) with lower proportions tri-tetra (7.4+/-5.4%) and higher chlorinated congeners (5.1+/-3.3%). A consistent weathering pattern with loss of 3-5 chlorobiphenyls and enrichment in higher chlorinated PCBs corresponding to a shift from a 1:1 to a 1:3 1254:1260 Aroclor mixture, was observed offshore. A principal component analysis performed with the relative contribution of PCB congener classes confirmed the offshore weathering pattern indicating that transformer oils containing Aroclor 1254-1260 are the most probable sources. Sediment inventories, sediment trap fluxes and Fugacity II calculations indicate an accumulation approximately 500-800 kg PCB in superficial sediments of this coastal environment.     

Aroclor misidentification in environmental samples: how do we communicate more effectively between the laboratory and the data user?

Disposal of carbonless copy paper (CCP) paper sludge during the 1960s contaminated a site in the USA with PCBs. Despite historic records of CCP sludge disposal and absence of evidence of any other disposal, a dispute arose among the parties over the source of the PCBs. Aroclor 1242 is well documented as the PCB mixture used in CCP, yet Aroclors 1242, 1248, 1254, and 1260 were reported by the analytical laboratory. How could the PCBs at a single, small site be reported as four different Aroclors? Some claimed that there had to be at least four Aroclors source inputs to the site. Disposal of four different Aroclors at this site would simply defy logic and the historic record. Weathering of the mixtures is part of the story. A larger issue is the conflict between the intent of the USEPA 8082 method to determine the total PCB content in environmental samples to facilitate environmental cleanup and disposal decisions within a regulatory context versus the data users’ intent to identify the PCB sources. This inappropriate extension of the data leads to erroneous conclusions. To mitigate problems like this, laboratory analysis requests need to be matched to the intended data usage; conversely, the data must not be over-interpreted beyond the limits of the method. The PCB analysis community needs to develop a better articulation of the limits of Aroclor identification for the broader community that may naïvely assume that if the laboratory reports “Aroclor 1248,” then someone must have placed Aroclor 1248 at the site. After all, when a laboratory reports “lead” or “chloroform,” those identifications are never in question.     

Anaerobic biodegradation of weathered polychlorinated biphenyls (PCBs) in contaminated sediments of Porto Marghera (Venice Lagoon,Italy)

The biodegradation of weathered polychlorinated biphenyls (PCBs) (mono and di-chlorinated biphenyls along with PCBs partially ascribed to Aroclor 1242 and 1254) occurring at 1.5-2.5 mg/kg in three different sediments collected from the Porto Marghera contaminated area of Venice Lagoon (Italy) was reported in this study. Strictly anaerobic, slurry microcosms consisting of sediments suspended (at 25% v/v) in a marine salt medium, lagoon water or lagoon water supplemented with NaHCO3 and Na2S were developed and monitored for PCB transformation, sulfate consumption and methane (CH4) production for 6 months. A marked depletion of highly chlorinated biphenyls along with the accumulation of low-chlorinated, often ortho-substituted biphenyls was observed in the biologically active microcosms, where a remarkable consumption of sulfate and/or a significant production of CH4 were also detected. Notably, a more extensive PCB transformation was observed in the microcosms developed with site water (both without or with NaHCO3 plus Na2S), where both the initial concentration of sulfate and sulfate consumption were five fold-higher than in the corresponding microcosms with salt medium. These data indicate that weathered PCBs of the three contaminated sediments of Porto Marghera utilized in this study can undergo reductive dechlorination, probably mediated by indigenous sulfate-reducing and/or methanogenic bacteria.     

Isomer-specific analysis of chlorinated biphenyls,naphthalenes and dibenzofurans in Delor: polychlorinated biphenyl preparations from the former Czechoslovakia

Technical polychlorinated byphenyl (PCB) preparations--Delors 103, 104, 105, and 106--produced in the former Czechoslovakia were analyzed for their chlorobiphenyl (CB), chloronaphthalene (PCN) and chlorinated dibenzofuran (PCDF) composition and content using high resolution gas chromatography-mass spectrometry techniques. The congener patterns of Delors 103, 104, 105, and 106 resembled Aroclors 1242, 1248, 1254, and 1260. Delors contained PCNs and PCDFs, as impurities, at microgram per gram concentrations. Concentrations of PCNs and PCDFs in Delors were greater than those found in the corresponding Aroclors. The potential for the emissions of PCNs and PCDFs from Delor was estimated to be 3680 and 860 kg, respectively. Non- and mono-ortho PCBs were the major contributors to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalents in Delor mixtures.     

A preliminary investigation of the environmental impact of a thermal power plant in relation to PCB contamination

Purpose

The most significant application of polychlorinated biphenyls (PCBs) is in transformers and capacitors. Therefore, power plants are important suspected sources for entry of PCBs into the environment. In this context, the levels and distribution of PCBs in sediment, soil, ash, and sludge samples were investigated around Seyitömer thermal power plant, Kütahya, Turkey. Moreover, identity and contribution of PCB mixtures were predicted using the chemical mass balance (CMB) receptor model.

Methods

United States Environmental Protection Agency methods were applied during sample preparation, extraction (3540C), cleanup (3660B, 3665A, 3630C), and analysis (8082A).

Results

ΣPCB concentrations in the region ranged from not detected to 385 ng/g dry weight, with relatively higher contamination in sediments in comparison to soil, sludge, and ash samples collected from around the power plant. Congener profiles of the sediment and soil samples show penta-, hexa-, and hepta-chlorobiphenyls as the major homolog groups. The results from the CMB model indicate that PCB contamination is largely due to Clophen A60/A40 and Aroclor 1254/1254(late)/1260 release into the sediment and sludge samples around the thermal power plant.

Conclusions

Since there are no other sources of PCBs in the region and the identity of PCB sources estimated by the CMB model mirrors PCB mixtures contained in transformers formerly used in the plant, the environmental contamination observed especially in sediments is attributed to the power plant. Release of PCBs over time, as indicated by the significant concentrations observed even in surface samples, emphasizes the importance of the need for better environmental management.

     

Chlorinated hydrocarbon contaminants in Hong Kong surficial sediments.

Twenty surficial sediments were sampled from nearshore Hong Kong waters during 1997-1998, and analyzed for a range of chlorinated pesticides and polychlorinated biphenyls (PCBs). Results showed that concentrations (on a dry weight basis) of total HCHs were in the range 0.1-16.7 ng g-1, and total DDTs 0.3-14.8 ng g-1. PCBs, measured as an Aroclor 1242, 1248, 1254, 1260 (1:1:1:1) mixture, were found to be in a range of 0.5-97.9 ng g-1, and were at highest concentrations in Victoria Harbour. Results indicated that chlorinated pesticides and PCBs in Hong Kong nearshore sediments were most likely derived from waste discharge from a variety of sources, including agricultural, sewage, industrial waste disposal and shipping-related activities. In addition, as the north and west sides of Hong Kong are subject to influence from the Pearl River (due mainly to agricultural activities in the Pearl River Delta, and to a lesser extent developments around the Shenzhen Special Economic Zone), these inputs are also thought to be likely sources of contamination.     

Polychlorinated biphenyls (PCBs) in fish from the Sana River (Bosnia and Herzegovina): A preliminary study on the health risk in sport fishermen

Fish is the main single source of polychlorinated biphenyls (PCBs) exposure in men. Anecdotal reports suggest high wild fish consumption rates among sport fishermen in Sanski Most area, Bosnia and Herzegovina (BiH). Presence of PCBs in the environment in BiH was previously documented. The main objective of this work was to estimate the magnitude of PCBs exposure and assess the potential health risk in sport fishermen in Sanski Most. The fishing pattern and magnitude of fish consumption were estimated in the questionnaire survey conducted during April 2012 among members (n = 60) of the local sport fishermen association in Sanski Most. Calculated median and high-end (90th percentile) fish consumption rates were 31 g d^?1 and 126 g d^?1, respectively. The PCB concentrations (as Aroclor 1254 equivalents), determined by ELISA immunoassay in 28 fish fillets ranged from undetectable to 208 μg kg^?1. Two different exposure scenarios were used: (a) median exposure, calculated from the median fish consumption rate and median PCB concentrations, and (b) “worst case” scenario, calculated from the high-end fish consumption rate and mean PCB concentrations. The results suggest negligible lifelong cancer and non-cancer risks in case of low to moderate fish consumption rate, but possibly unacceptable risk levels in high-end consumers.     

Distribution patterns of nitrobenzenes and polychlorinated biphenyls in water, suspended particulate matter and sediment from mid- and down-stream of the Yellow River (China)

Samples of water, suspended particulate matter (SPM) and sediment were collected from mid- and down-stream of the Yellow River. The distribution and concentration of 10 nitroaromatic compounds and polychlorinated biphenyls (PCBs) were extensively studied. The total concentration of 10 nitrobenzenes (SigmaNBs) varied from 0.269 to 9.052 microg l(-1) in water, from 2.916 to 164.4 microg kg(-1) dry weight in SPM, and from 0.954 to 14.72 microg kg(-1) dry weight in sediment. PCBs associated with the sediments, measured as the summed responses of Aroclor 1242, 1248, 1254, 1260 (in comparison to those of a standard 1:1:1:1 mixture), were found to be in the range of non-detectable to 5.98 microg kg(-1). In the samples collected, various PCB congeners showed similar distribution characteristics with congeners containing 3-5 chlorine atoms accounting for more than 96.4% of total PCB. In most of the samples, PCB concentrations occurred in the order: TetraCB > TriCB > PentaCB. Levels of SigmaNBs in the Yellow River were relatively low in comparison with values reported from other river and marine systems, and PCB levels were comparatively low. Relative to the PCBs, SigmaNBs showed significantly more difference among the various stations, presumably due to the influence of different pollution sources. No obvious correlation was observed between the pollutant concentrations and either the TOC or the grain size of the sediments.     

Congener-specific approach to human PCB concentrations by serum analysis

The objective of this study was to evaluate all congeners of polychlorinated biphenyls (PCBs) in human serum samples. Concentrations of all PCB congeners in the serum of 87 volunteers were determined by high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The participants consisted of 47 males and 40 females, including 25 men working at municipal solid waste incinerators (MSWIs). The mean concentrations of total PCBs and dioxin-like PCBs were 242.77ng/g lipid (median: 180.17ng/g lipid) and 18.57ng/g lipid (median: 15.34ng/g lipid), respectively. Penta-, hexa-, and heptachlorinated biphenyls contributed more than 80% of the total PCBs detected in human serum. Congener-specific analysis indicated that PCB153, PCB138, PCB180, PCB187, and PCB118 contributed 57.3% of the total PCBs detected in human serum samples. A statistical analysis was performed to determine whether there were significant correlations between PCB concentrations and specific variables such as age, gender, smoking habits, occupation, and body mass index (BMI). However, serum PCB concentrations correlated only with age. In addition, we found that total PCBs and dioxin-like PCBs highly correlated with PCB153 (correlation coefficient r=0.93, p<0.01) and PCB118 (correlation coefficient r=0.98, p<0.01), respectively. Thus these two congeners could be satisfactory indicators for total PCBs and dioxin-like PCBs in human serum.