Effect of humic acids on physicochemical property and Cd(II) sorption of multiwalled carbon nanotubes

Zinc pyrithione is used as an antifouling agent. However, the environmental impacts of zinc pyrithione have recently been of concern. Zinc induces diverse actions during oxidative stress; therefore, we examined the effect of zinc pyrithione on rat thymocytes suffering from oxidative stress using appropriate fluorescent probes. The cytotoxicity of zinc pyrithione was not observed when the cells were incubated with 3 μM zinc pyrithione for 3 h. However, zinc pyrithione at nanomolar concentrations (10 nM or more) significantly increased the lethality of cells suffering from oxidative stress induced by 3 mM H₂O₂. The application of zinc pyrithione alone at nanomolar concentrations increased intracellular Zn²⁺ level and the cellular content of superoxide anions, and decreased the cellular content of nonprotein thiols. The simultaneous application of nanomolar zinc pyrithione and micromolar H₂O₂ synergistically increased the intracellular Zn²⁺ level. Therefore, zinc pyrithione at nanomolar concentrations may exert severe cytotoxic action on cells simultaneously exposed to chemicals that induce oxidative stress. If so, zinc pyrithione leaked from antifouling materials into surrounding environments would be a risk factor for aquatic ecosystems. Alternatively, zinc pyrithione under conditions of oxidative stress may become more potent antifouling ingredient.     

Synergistic increase in cell lethality by dieldrin and H2O2 in rat thymocytes: Effect of dieldrin on the cells exposed to oxidative stress

Dieldrin, one of persistent pesticides, is highly resistant to biotic and abiotic degradation. It is accumulated in organisms. Recent studies suggest that dieldrin exerts a potent cytotoxic action on cells exposed to oxidative stress. In this study, the effect of dieldrin on rat thymocytes exposed to hydrogen peroxide (H₂O₂)-induced oxidative stress was examined. Dieldrin at 5 μM and H₂O₂ at 300 μM slightly increased cell lethality from a control value of 5.4 ± 0.5% (mean ± standard deviation of four experiments) to 7.8 ± 1.3% and 9.0 ± 0.3%, respectively. Simultaneous application of dieldrin and H₂O₂ significantly increased cell lethality to 46.2 ± 1.8%. The synergistic increase in cell lethality was dependent on dieldrin concentration (0.3–5 μM) but not on H₂O₂ concentration (30–300 μM). Dieldrin accelerated H₂O₂-induced cell death, which was estimated with the help of annexin V-FITC and propidium iodide. Presence of either dieldrin or H₂O₂ decreased the cellular content of nonprotein thiol and increased intracellular Zn²⁺ concentration. The combination of dieldrin and H₂O₂ further pronounced these effects. TPEN, a chelator of intracellular Zn²⁺, significantly attenuated the synergistic increase in cell lethality induced by dieldrin and H₂O₂. It is, therefore, suggested that dieldrin augments the cytotoxicity of H₂O₂ in a Zn²⁺-dependent manner.     

Removal and formation of chlorinated triclosan derivatives in wastewater treatment plants using chlorine and UV disinfection

Triclosan, a common antimicrobial agent, may react during the disinfection of wastewater with free chlorine to form three chlorinated triclosan derivatives (CTDs). This is of concern because the CTDs may be photochemically transformed to tri- and tetra-chlorinated dibenzo-p-dioxins when discharged into natural waters. In this study, wastewater influent, secondary (pre-disinfection) effluent, and final (post-disinfection) effluent samples were collected on two occasions each from two activated sludge wastewater treatment plants, one using chlorine disinfection and one using UV disinfection. Concentrations of triclosan and three CTDs were determined using ultra performance liquid chromatography-triple quadrupole mass spectrometry with isotope dilution methodology. Triclosan and the CTDs were detected in every influent sample at levels ranging from 453 to 4530 and 2 to 98 ng L⁻¹, respectively, though both were efficiently removed from the liquid phase during activated sludge treatment. Triclosan concentrations in the pre-disinfection effluent ranged from 36 to 212 ng L⁻¹, while CTD concentrations were below the limit of quantification (1 ng L⁻¹) for most samples. In the treatment plant that used chlorine disinfection, triclosan concentrations decreased while CTDs were formed during chlorination, as evidenced by CTD levels as high as 22 ng L⁻¹ in the final effluent. No CTDs were detected in the final effluent of the treatment plant that used UV disinfection. The total CTD concentration in the final effluent of the chlorinating treatment plant reached nearly one third of the triclosan concentration, demonstrating that the chlorine disinfection step played a substantial role in the fate of triclosan in this system.     

Effects of growth substrate on triclosan biodegradation potential of oxygenase-expressing bacteria

Triclosan is an antimicrobial agent, an endocrine disrupting compound, and an emerging contaminant in the environment. This is the first study investigating triclosan biodegradation potential of four oxygenase-expressing bacteria: Rhodococcus jostii RHA1, Mycobacterium vaccae JOB5, Rhodococcus ruber ENV425, and Burkholderia xenovorans LB400. B. xenovorans LB400 and R. ruber ENV425 were unable to degrade triclosan. Propane-grown M. vaccae JOB5 can completely degrade triclosan (5 mg L⁻¹). R. jostii RHA1 grown on biphenyl, propane, and LB medium with dicyclopropylketone (DCPK), an alkane monooxygenase inducer, was able to degrade the added triclosan (5 mg L⁻¹) to different extents. Incomplete degradation of triclosan by RHA1 is probably due to triclosan product toxicity. The highest triclosan transformation capacity (T_c, defined as the amount of triclosan degraded/the number of cells inactivated; 5.63 × 10⁻³ ng triclosan/16S rRNA gene copies) was observed for biphenyl-grown RHA1 and the lowest T_c (0.20 × 10⁻³ ng-triclosan/16S rRNA gene copies) was observed for propane-grown RHA1. No triclosan degradation metabolites were detected during triclosan degradation by propane- and LB + DCPK-grown RHA1. When using biphenyl-grown RHA1 for degradation, four chlorinated metabolites (2,4-dichlorophenol, monohydroxy-triclosan, dihydroxy-triclosan, and 2-chlorohydroquinone (a new triclosan metabolite)) were detected. Based on the detected metabolites, a meta-cleavage pathway was proposed for triclosan degradation.     

Triclosan in individual human milk samples from Australia

Triclosan is a chlorinated phenol ether that has been in widespread use as a broad-spectrum antibacterial agent for four decades. When compared to the limited international data available on human body burden of triclosan, results from a pooled blood study suggested that triclosan concentrations in Australia were a factor two higher than observed in Sweden. This study determined triclosan levels in individual human milk samples (n = 151) collected between 2002 and 2005 from primiparous Australian mothers. It provided the first report of population triclosan levels and individual variation in Australia and gave a measure of infant exposure via breast feeding. The distribution of triclosan concentration was positively skewed, with 7.2% of the samples below the LOQ, 66% with a concentration of less than or equal to 1.0 ng g⁻¹ fresh weight and the remaining samples above 1 ng g⁻¹ reaching a maximum concentration of 19 ng g⁻¹ fresh weight. The mean and median triclosan concentrations were 1.3 ± 2.7 ng g⁻¹ f.w. and 0.26 ng g⁻¹ f.w., respectively. The results of this study showed high variability in triclosan concentrations between individuals and no correlations with maternal age (p = 0.094), maternal weight (p = 0.971) or infant age at the time of sample collection (p = 0.621). A large number of samples contained low or non-quantifiable concentrations of triclosan and so, in Australia, ubiquitous background exposure due to environmental sources is low. This means that body burden can be influenced by an individual’s use of triclosan containing product. Given that triclosan containing product use is continuing, it is important that monitoring in both humans and the environment is continued and that triclosan containing products are adequately labeled so that an individual can choose to avoid exposure.     

Effects of nano-TiO(2) in combination with ambient UV-irradiation on a leaf shredding amphipod

Production and use of engineered nanoparticles, such as titanium dioxide nanoparticles (nTiO₂), is increasing worldwide, enhancing their probability to enter aquatic environments. However, direct effects of nTiO₂ as well as ecotoxicological consequences due to the interactions of nTiO₂ with environmental factors like ultraviolet (UV) irradiation on representatives of detrital food webs have not been assessed so far. Hence, the present study displayed for the first time adverse sublethal effects of nTiO₂ at concentrations as low as 0.2 mg L⁻¹ on the leaf shredding amphipod Gammarus fossarum both in presence and absence of ambient UV-irradiation following a 7-d exposure. In absence of UV-irradiation, however, the effects seemed to be driven by accumulation of nTiO₂ at the bottom of the test vessels to which the gammarids were potentially exposed. The adverse sublethal and lethal effects on gammarids caused by the combined application of nTiO₂ and ambient UV-irradiation are suggested to be driven by the formation of reactive oxygen species. In conclusion, both the accumulation of nTiO₂ at the bottom of the test vessel and the UV induced formation of reactive oxygen species clearly affected its ecotoxicity, which is recommended for consideration in the environmental risk assessment of nanoparticles.     

Triclosan affects the microbial community in simulated sewage-drain-field soil and slows down xenobiotic degradation

Effects of the common antibacterial agent triclosan on microbial communities and degradation of domestic xenobiotics were studied in simulated sewage-drain-field soil. Cultivable microbial populations decreased 22-fold in the presence of 4 mg kg⁻¹ of triclosan, and triclosan-resistant Pseudomonas strains were strongly enriched. Exposure to triclosan also changed the general metabolic profile (Ecoplate substrate profiling) and the general profile (T-RFLP) of the microbial community. Triclosan degradation was slow at all concentrations tested (0.33-81 mg kg⁻¹) during 50-days of incubation. Mineralization experiments (¹⁴C-tracers) and chemical analyses (LC-MS/MS) showed that the persistence of a linear alkylbenzene sulfonate (LAS) and a common analgesic (ibuprofen) increased with increasing triclosan concentrations (0.16-100 mg kg⁻¹). The largest effect was seen for LAS mineralization which was severely reduced by 0.16 mg kg⁻¹ of triclosan. Our findings indicate that environmentally realistic concentrations of triclosan may affect the efficiency of biodegradation in percolation systems.     

Removal and reductive dechlorination of triclosan by Chlorella pyrenoidosa

Triclosan that is widely used as antimicrobial agent has been detected as contaminant in various aquatic environments. In this work, removal and biodegradation of triclosan in water by using a ubiquitous green alga, Chlorella pyrenoidosa was investigated. When C. pyrenoidosa was exposed to a series concentration of triclosan from 100 to 800 ng mL⁻¹, more than 50% of triclosan was eliminated by algal uptake from the culture medium during the first 1 h exposure and reached equilibrium after the 6 h treatment. In the biodegradation experiments, a removal percentage of 77.2% was obtained after C. pyrenoidosa was cultivated with 800 ng mL⁻¹ triclosan for 96 h. A major metabolite from the reductive dechlorination of triclosan was identified by using liquid chromatography coupled with electrospray ionization-mass spectrometry. The ultrastructural morphology of algal cells grown in the presence of triclosan was observed by using transmission electron microscopy and the growth of algal cells was detected. It was found that the trilcosan treatment resulted in the disruption of the chloroplast and the release of organic material into aquatic environment, which indicated that triclosan may affect membrane metabolism.     

Characterization of bacterial communities at heavy-metal-contaminated sites

The microbial community in soil samples from two long-term contaminated sites was characterized by using culture-dependent and culture-independent methods. The two sites investigated contained high amounts of heavy metals and were located in the upper Silesia Industrial Region in southern Poland. The evaluation of the aerobic soil microbial population clearly demonstrated the presence of considerable numbers of viable, culturable bacteria at both sites. A high fraction of the bacterial population was able to grow in the presence of high amounts of metals, i.e. up to 10 mM Zn²⁺, 3 mM Pb²⁺ or 1 mM Cu²⁺. Site 1 contained significantly (P < 0.05) lower bacterial numbers growing in the presence of 10 mM Zn²⁺ than site 2, while the opposite was observed for bacteria tolerating 1 mM Cu²⁺. This coincided with the contents of these two metals at the two sites. Ecophysiological (EP) indices for copiotrophs (r-strategists) and oligotrophs (K-strategists) pointed to high bacterial diversity at both sites. Fluorescence in situ hybridization (FISH) analysis indicated that Actinobacteria and Proteobacteria represent the physiologically active fraction of bacteria at the two sites. Shannon diversity (H′) indices for FISH-detected bacterial phylogenetic groups were not significantly different at the two sites.     

Aqueous photoreduction of oxidized mercury species in presence of selected alkanethiols

Mercury is a global environmental contaminant with severe toxicity impact. The chemical processes resulting in the transformation of oxidized mercury species (Hg²⁺) to elemental mercury (Hg⁰), greatly affects the fate and transport of mercury in the natural environment. We hereby provide the first study on the photochemistry of Hg²⁺ with selected alkanethiols (R-SH) as model compounds to represent thiols and thiol-type binding sites on humic substances in natural waters because of the common sulfhydryl functional group (-SH). Kinetic studies were performed using cold vapor atomic fluorescence spectroscopy (CVAFS), the formation of Hg²⁺-thiol complexes (Hg(SR)₂) were confirmed by UV-visible spectrometry and Atmospheric Pressure Chemical Ionization-Mass Spectrometry (APCI-MS), and the reaction products were analyzed using Electron Impact-Mass Spectrometry (EI-MS) and Solid Phase Microextraction coupled with Gas Chromatography-Mass Spectrometry (SPME/GC-MS). Our results indicated that the photoreduction of Hg²⁺ by selected alkanethiols may be mediated by Hg²⁺-thiol complexes to produce Hg⁰. Under our experimental conditions, the apparent first order rate constants obtained for 1-propanethiol, 1-butanethiol, and 1-pentanethiol were (2.0 ± 0.2) × 10⁻⁷ s⁻¹, (1.4 ± 0.1) × 10⁻⁷ s⁻¹, (8.3 ± 0.5) × 10⁻⁸ s⁻¹, respectively. The effects of ionic strength, dissolved oxygen or chloride ion on reaction rates were found to be minimal under our experimental conditions. The identified products of the reaction between oxidized mercury species with selected alkanethiols (C₃-C₅) were Hg⁰ and disulfides (RS-SR). The potential environmental implications are herein discussed.     

Removal of Rhodamine B under visible irradiation in the presence of Fe⁰, H₂O₂, citrate and aeration at circumneutral pH

A new Vis-Fe⁰-H₂O₂-citrate-O₂ system comprising zero-valent iron, hydrogen peroxide, citrate anion and aeration at circumneutral pH under visible irradiation was studied. 21 μmol L⁻¹ of Rhodamine B (RhB) was chosen as the substrate to be tested. Experiments were conducted under conditions of 2.9 mmol L⁻¹ of H₂O₂, 12.6 g of Fe⁰ and 1.0 mmol L⁻¹ of citrate at pH 7.5. Results showed that, in 1 h reaction, 54% of RhB was removed with corresponding 26% of COD reduced. Meanwhile, the amount of released dissolved irons from Fe⁰ surface was found to be at a very low level as <5.4 μmol L⁻¹. Extinguishing tests with isopropanol suggested that RhB oxidation by hydroxyl radicals was the main process taken place in Vis-Fe⁰-H₂O₂-citrate-O₂ system, which accounted for 75% of substrate removal in 3 h reaction. Control and factor influencing experiments showed that the prohibitive extents of individual factor importance on RhB removal followed a decreasing order of Fe⁰ > H₂O₂ > citrate > Vis > O₂. This study showed an excellent system that could remove refractory organic compounds from water in laboratory researches, and also provided a good idea to reduce secondary contamination by dissolved irons in future investigations.     

Euglena gracilis as a model for the study of Cu and Zn toxicity and accumulation in eukaryotic cells

We have observed the effect of copper and zinc on the biology of Euglena gracilis. The cells displayed different sensitivities to these metals, as the apparent LC₅₀ for Cu²⁺ was 0.22 mM, and for Zn²⁺ it was 0.88 mM. While Zn²⁺ was able to increase cell proliferation even at 0.1 mM, the minimal CuCl₂ concentration tested (0.02 mM) was sufficient to impair cell division. Higher concentrations of these metals not only inhibited cell division in a concentration-dependent manner, but also interfered with the metabolism of E. gracilis. A higher accumulation of proteins and lipids per cell was observed at the DI₅₀ concentration for metal-treated cells. These results suggest that the test concentration of both metals leads to a failure in completing cell division. Ultrastructural analysis indicated a chloroplast disorganization in copper-treated cells, as well as the presence of electron dense granules with different shapes and sizes inside vacuoles. Microanalysis of these granules indicated an accumulation of copper, thus suggesting a detoxification role played by the vacuoles. These results indicate that E. gracilis is an efficient biological model for the study of metal poisoning in eukaryotic cells. They also indicate that copper and zinc (copper being more poisonous) had an overall toxic effect on E. gracilis and that part of the effect can be ascribed to defects in the structure of chloroplast membranes.     

Effect of different nitrogen forms on the toxicity of Zn in wheat seedling root: a modeling analysis

Heavy metal stress in culture media is always rhizotoxic. Our study aims to investigate the role of negative potential (ψ ₀) at root cell membrane surface (CMs) on modeling Zn²⁺ toxicity to wheat seedling roots and to examine the effects of different nitrogen forms (NH₄ ⁺ and NO₃ ^?) on ψ ₀ and Zn rhizotoxicity. Solution culture experiments were conducted to measure the root elongation and Zn accumulation under Zn²⁺ exposure. The role of two nitrogen forms in affecting Zn²⁺ toxicity was compared, giving particular consideration to ψ ₀ and Zn²⁺ activities at CMs ({Zn²⁺}₀). Results showed that NH₄ ⁺ alleviates Zn²⁺ rhizotoxicity and NO₃ ^? increases Zn²⁺ rhizotoxicity. In modeling the rhizotoxicity, root length correlated better with {Zn²⁺}₀ than {Zn²⁺}_b, and the predictive accuracy (r ²) of NH₄ ⁺ treatment increased from 0.748 to 0.917 when incorporation of {Zn²⁺}₀ and {Ca²⁺}₀ into analysis. Oppositely, ψ ₀ played a limited role in modeling Zn²⁺ rhizotoxicity and bioavailability in NO₃ ^? treated medium (r ² = 0.609). Moreover, higher concentration of Zn in roots was found in NO₃ ^? treatment, compared with the NH₄ ⁺ treatment. ψ ₀ rather than the rhizotoxicity data correlated better with Zn accumulation especially in the NO₃ ^? treatment (r ² > 0.7), which meant the electrical driving force at CMs playing a dominant role in modeling the metal accumulation. In conclusion, the alleviatory role of NH₄ ⁺ on Zn toxicity and uptake was well explained and modeled by electrostatic effects at CMs. Though our data do not explore mechanisms for the NO₃ ^?-Zn²⁺ interactions, we propose that ψ ₀ worked better in affecting the driving force for root Zn uptake, than influencing metal bioavailability at CMs.     

Methyl-triclosan binding to human serum albumin: Multi-spectroscopic study and visualized molecular simulation

Methyl-triclosan (MTCS), a transformation product and metabolite of triclosan, has been widely spread in environment through the daily use of triclosan which is a commonly used anti-bacterial and anti-fungal substance in consumer products. Once entering human body, MTCS could affect the conformation of human serum albumin (HSA) by forming MTCS–HSA complex and alter function of protein and endocrine in human body. To evaluate the potential toxicity of MTCS, the binding mechanism of HSA with MTCS was investigated by UV–vis absorption, circular dichroism and Fourier transform infrared spectroscopy. Binding constants, thermodynamic parameters, the binding forces and the specific binding site were studied in detail. Binding constant at room tempreture (T = 298 K) is 6.32 × 10³ L mol⁻¹; ΔH⁰, ΔS⁰ and ΔG⁰ were 22.48 kJ mol⁻¹, 148.16 J mol⁻¹ K⁻¹ and −21.68 kJ mol⁻¹, respectively. The results showed that the interactions between MTCS and HSA are mainly hydrophobic forces. The effects of MTCS on HSA conformation were also discussed. The binding distance (r = 1.2 nm) for MTCS–HSA system was calculated by the efficiency of fluorescence resonance energy transfer. The visualized binding details were also exhibited by molecular modeling method and the results could agree well with that from the experimental study.     

Toxicity of nanoparticulate and bulk ZnO, Al2O3 and TiO2 to the nematode Caenorhabditis elegans

Limited information is available on the environmental behavior and associated potential risk of manufactured oxide nanoparticles (NPs). In this research, toxicity of nanoparticulate and bulk ZnO, Al₂O₃ and TiO₂ were examined to the nematode Caenorhabditis elegans with Escherichia coli as a food source. Parallel experiments with dissolved metal ions from NPs were also conducted. The 24-h median lethal concentration (LC₅₀) and sublethal endpoints were assessed. Both NPs and their bulk counterparts were toxic, inhibiting growth and especially the reproductive capability of the nematode. The 24-h LC₅₀ for ZnO NPs (2.3 mg L⁻¹) and bulk ZnO was not significantly different, but significantly different between Al₂O₃ NPs (82 mg L⁻¹) and bulk Al₂O₃ (153 mg L⁻¹), and between TiO₂ NPs (80 mg L⁻¹) and bulk TiO₂ (136 mg L⁻¹). Oxide solubility influenced the toxicity of ZnO and Al₂O₃ NPs, but nanoparticle-dependent toxicity was indeed observed for the investigated NPs.     

Oxidation of bisphenol F (BPF) by manganese dioxide

Bisphenol F (BPF), an environmental estrogen, is used as a monomer in plastic industry and its environmental fate and decontamination are emerging concern. This study focused on the kinetics, influencing factors and pathways of its oxidation by MnO₂. At pH 5.5, about 90% of BPF was oxidized in 20 min in a solution containing 100 μM MnO₂ and 4.4 μM BPF. The reaction was pH-dependent, following an order of pH 4.5 > pH 5.5 > pH 8.6 > pH 7.5 > pH 6.5 > pH 9.6. Humic acids inhibited the reaction at low (≤pH 5.5) and high pH (≥pH 8.6) at high concentrations. In addition, metal ions and anions also suppressed the reaction, following the order Mn²⁺ > Ca²⁺ > Mg²⁺ > Na⁺ and HPO₄²⁻ > Cl⁻ > NO₃⁻ ≈ SO₄²⁻, respectively. A total of 5 products were identified, from which a tentative pathway was proposed.     

满江红干体对锌离子的生物吸附

以满江红干体为生物吸附剂，研究了不同条件下对废水中Zn²⁺的净化作用。结果表明，满江红干体对Zn²⁺的吸附是一个快速的过程，前5 min的吸附量达到最大吸附量的62.9%，30 min达到吸附平衡；初始pH值对Zn²⁺的吸附有显著的影响，最适pH值为6；随着干体量的增加，吸附率逐渐提高而吸附量则降低；随着Zn²⁺初始浓度的增加，吸附率逐渐降低而吸附量则提高。满江红干体对Zn²⁺的吸附符合Langmuir吸附等温线方程，最大吸附容量达57.5 mg/g。5次吸附解吸循环实验数据表明，重复次数和再生处理对满江红干体的吸附能力没有产生显著影响。因此，满江红干体在处理含Zn²⁺废水中的重复使用是可行的。     

Enhanced resistance of yeast mutants deficient in low-affinity iron and zinc transporters to stannous-induced toxicity

Tin or stannous (Sn²⁺) compounds are used as catalysts, stabilizers in plastic industries, wood preservatives, agricultural biocides and nuclear medicine. In order to verify the Sn²⁺ up-take and toxicity in yeast cells we utilized a multi-elemental analysis known as particle-induced X-ray emission (PIXE) along with cell survival assays and quantitative real-time PCR. The detection of Sn²⁺ by PIXE was possible only in yeast cells in stationary phase of growth (STAT cells) that survive at 25 mM Sn²⁺ concentration. Yeast cells in exponential phase of growth (LOG cells) tolerate only micro-molar Sn²⁺ concentrations that result in intracellular concentration below of the method detection limit. Our PIXE analysis showed that STAT XV185-14c yeast cells demonstrate a significant loss of intracellular elements such as Mg, Zn, S, Fe and an increase in P levels after 1 h exposure to SnCl₂. The survival assay showed enhanced tolerance of LOG yeast cells lacking the low-affinity iron and zinc transporters to stannous treatment, suggesting the possible involvement in Sn²⁺ uptake. Moreover, our qRT-PCR data showed that Sn²⁺ treatment could generate reactive oxygen species as it induces activation of many stress-response genes, including SOD1, YAP1, and APN1.     

US/Zn~0体系降解水中的对硝基苯甲酸

为高效去除水体中的对硝基苯甲酸、开发新型水处理技术,提出以超声与单质锌联用降解水中的对硝基苯甲酸。考察了锌投加量、溶液初始pH、声功率及溶液初始浓度对拟一级反应速率常数(k0US/Zn)的影响,比较了US、Zn0和US/Zn03体系下的降解常数,并对US/Zn0体系的降解机理进行了初探。结果表明,以上4种因素对k0US/Zn均有很大影响,k0US/Zn分别在溶液初始pH为5、声功率为120 W、溶液初始浓度为0.04 mmol/L时达到最大值,且随着锌投加量的增加而增加。超声与单质锌在降解对硝基苯甲酸的过程中存在很好的协同作用,在最优条件下,k0US/Zn=0.052 min-1,分别是单独超声降解及单独锌降解的21.5倍和2.53倍。在联用体系中,主要是依靠OH·氧化及单质锌还原的相互加强来去除对硝基苯甲酸。     

Photo-dissociation of dimethylamine by KrBr excilamp

A study of dimethylamine photo-dissociation in the gas phase has been conducted using UV radiation delivered from a KrBr^* excilamp, driven by a sinusoidal electronic control gear with maximum emission at wavelength of 207 nm. The electrical input power and radiant power of the lamp were measured to determine their effects on the degradation. The influence of flow velocity and initial concentration of dimethylamine were also examined. In order to evaluate the photo-dissociation process comprehensively, several parameters were investigated, including removal efficiency, energy yield, carbon balance and CO₂ selectivity. It is shown that the removal efficiency increases with enhanced input power and decreased gas flow rate. A high removal efficiency of 68% is achieved for lamp power 102 W and flow velocity 15 m³ h⁻¹. The optimum dimethylamine initial concentration is around 3520 mg m⁻³, for which the energy yield reaches up to 442 g kW h⁻¹ when the input power is 65 W. In addition, two chain compounds (1,3-bis-dimethylamino-2-propanol; 3-penten-2-one, 4-amino) and three ring organic matters (1-azetidinecarboxaldehyde, 2,2,4,4-tetramethyl; N-m-tolyl-succinamic acid; p-acetoacetanisidide), were identified by GC–MS as secondary products, in order to demonstrate the pathways of the dimethylamine degradation.