某高密度街区大气颗粒物质量浓度分布特征实测研究

为研究城市高密度街区大气颗粒物浓度分布特征,2019年秋季对上海市某高密度街区道路大气颗粒物浓度、空气温度、相对湿度、地理位置、车辆与道路图像视频信息进行了同步移动在线监测,并结合街区内固定站数据和后向轨迹模拟结果,总结了影响街区大气颗粒物浓度变化的主要因素。结果表明:城市大气颗粒物背景拟合值处于较低水平时,街区内的大气颗粒物浓度变化和影响因素易被识别;机动车污染源对大气颗粒物浓度贡献大,其中大型机动车的影响明显;户外施工和道路清扫会引起大气颗粒物浓度上升,其中PM₁₀上升更明显;交通密度大的十字路口大气颗粒物浓度通常较高;城市高架的盖状结构会阻碍大气颗粒物在垂直方向上的扩散,引起局部大气颗粒物浓度上升;街区内高大浓密的乔木对近地面的大气颗粒物屏蔽效果不理想,甚至有助于颗粒物累积;早晚高峰时段大气颗粒物浓度较非高峰时段高。     

某高密度街区大气颗粒物质量浓度分布特征实测研究

为研究城市高密度街区大气颗粒物浓度分布特征,2019年秋季对上海市某高密度街区道路大气颗粒物浓度、空气温度、相对湿度、地理位置、车辆与道路图像视频信息进行了同步移动在线监测,并结合街区内固定站数据和后向轨迹模拟结果,总结了影响街区大气颗粒物浓度变化的主要因素。结果表明:城市大气颗粒物背景拟合值处于较低水平时,街区内的大气颗粒物浓度变化和影响因素易被识别;机动车污染源对大气颗粒物浓度贡献大,其中大型机动车的影响明显;户外施工和道路清扫会引起大气颗粒物浓度上升,其中PM₁₀上升更明显;交通密度大的十字路口大气颗粒物浓度通常较高;城市高架的盖状结构会阻碍大气颗粒物在垂直方向上的扩散,引起局部大气颗粒物浓度上升;街区内高大浓密的乔木对近地面的大气颗粒物屏蔽效果不理想,甚至有助于颗粒物累积;早晚高峰时段大气颗粒物浓度较非高峰时段高。     

冬季沈阳市典型源排放PM_(10)浓度分布模拟分析

选取沈阳市7个典型的大气污染源2006年12月~2007年2月的PM10排放浓度资料,利用CALPUFF对PM10浓度月平均分布做模拟分析。模拟结果分析表明:冬季月平均PM10浓度分布的范围与风场、地形有直接的关系。地势平坦、风速大时,污染物扩散范围大,污染物浓度小;地势不平、风速小时,污染物扩散范围小,污染物浓度大。1月份是沈阳市冬季月平均大气污染最严重的月份,污染物分布主要集中在市区的北部、东部和南部地区,东部地区大气污染最为严重。     

冬季沈阳市典型源排放PM10浓度分布模拟分析

选取沈阳市7个典型的大气污染源2006年12月～2007年2月的PM10排放浓度资料，利用CALPUFF对PM10浓度月平均分布做模拟分析。模拟结果分析表明：冬季月平均PM10浓度分布的范围与风场、地形有直接的关系。地势平坦、风速大时，污染物扩散范围大，污染物浓度小；地势不平、风速小时，污染物扩散范围小，污染物浓度大。1月份是沈阳市冬季月平均大气污染最严重的月份，污染物分布主要集中在市区的北部、东部和南部地区，东部地区大气污染最为严重。     

长春市净月区和朝阳区采暖期与非采暖期大气颗粒物的分布特征及来源分析

分别在采暖期和非采暖期采集了长春市净月区与朝阳区的大气颗粒物,研究其污染特征的差异,并进行了形貌分析。结果表明:(1)净月区采暖期与非采暖期PM_(2.5)平均质量浓度分别为144.86、87.10μg/m~3,PM_(10)平均质量浓度分别为149.07、138.72μg/m~3;朝阳区采暖期与非采暖期PM_(2.5)平均质量浓度分别为234.48、110.01μg/m~3,PM_(10)平均质量浓度分别为275.07、147.50μg/m~3。整体上,非采暖期大气颗粒物浓度低于采暖期。(2)无论是采暖期还是非采暖期,净月区PM_(2.5)与PM_(10)浓度均明显低于朝阳区。(3)净月区采暖期大气颗粒物来源主要是柴油尾气、燃煤源与生物质燃烧;非采暖期,机动车尾气、建筑扬尘、土壤扬尘与某些工业排放对大气颗粒物贡献较大。朝阳区大气颗粒物来源较净月区复杂,这与两个区不同的地理位置和不同功能有直接的联系,建筑扬尘对于朝阳区大气颗粒物的含量有较大的影响。     

采用数值风洞模型对热电厂烟塔合一大气污染扩散的研究

随着城市的快速建设,城市建筑的高度和体量不断增加,同时大气污染源的排放方式和排放状态也与从前发生了很大的变化,特别是热电厂采用烟塔合一排放方式的出现,对常规应用的稳态远距离以统计学为基础理论的高斯大气预测方法提出了挑战。目前国内外广泛使用的大气污染物预测模式——德国模式在烟塔合一排放方式的预测上存在着许多关键性问题,如大风下洗条件下,冷却塔附近空腔区的大小和范围、空腔区污染物最高地面浓度等无法给出准确的预测结果。为准确预测烟塔合一排放方式的大气污染物扩散情况,采用一种新的大气污染物扩散的预测模式——数值风洞模型进行模拟预测研究,预测结果表明,在烟塔合一排放方式下,大气污染物最高地面浓度随风速增加而增加,同时在冷却塔下风向存在负压区,污染物在该区域高浓度聚集。且在夏季6.0m/s风速下,冷却塔下风向最高地面浓度出现峰值,属于最不利的气象条件。数值风洞模型可利用图形化手段实现对空腔区产生、变化、破碎至再生成的全过程描述,从而建立了一种大气污染预测的重要手段。     

海岸地区基于AERMOD的热力内边界层对大气污染物扩散影响的模拟研究

海岸地区热力内边界层(TIBL)对大气污染物扩散具有重要影响。选取杭州湾地区某区域为模拟区,采用一个TIBL高度的简单计算模式模拟模拟区的TIBL高度,将其耦合到空气质量模式AERMOD中,并对AERMOD的相关模块和参数进行了相应的修改,再分别利用原AERMOD和改进后的AERMOD,模拟了不同污染源情景下的大气污染物地面浓度分布。结果表明,在多数情况下,由于TIBL对于大气污染物扩散空间的限制,大气污染物的地面最大浓度有所升高,地面浓度的高值区范围也有所增加,具体影响特征取决于污染源与TIBL的相对高度以及污染源距离海岸的相对位置。     

杭州市冬春季大气细颗粒物中多环芳烃的粒径分布特征及细胞毒性研究

为了解杭州市大气细颗粒物中多环芳烃(PAHs)的粒径分布特征和主要来源,于2015年12月至2016年5月在杭州市某商住区采集了不同粒径的大气细颗粒物样品,利用气相色谱质谱联用仪对其中的PAHs进行分析,并进行了细胞毒性试验。结果表明,不同粒径大气细颗粒物中PAHs的总浓度冬季均明显高于春季。冬春两季的PAHs环数粒径分布基本呈现出4环5环3环6环2环。通过特征比值法判定,杭州市大气细颗粒物中的PAHs主要来源于燃烧源和机动车尾气排放。细胞毒性试验结果表明,粒径越小的大气细颗粒物对细胞的毒性作用越强,对细胞膜损伤程度越大。     

浙东沿海城市大气颗粒物污染特征及来源解析研究

对2009年夏季浙东沿海地区环境空气质量进行监测,监测大气颗粒物(TSP、PM10、PM2.5、PM1.0)浓度,分析颗粒物污染特征、水溶性离子及无机元素组成,运用化学质量平衡受体模型(CMB模型)对浙东沿海地区大气TSP来源进行解析.结果表明,浙东沿海地区的大气颗粒物主要以细颗粒物为主,颗粒物中主要的水溶性离子为SO2-4、NH+4、Ca2+,土壤尘是该地区大气TSP的主要来源,北仑、乐清和奉化TSP中土壤尘的分担率分别达到55.49%、42.52%、40.70%,各监测点TSP来源具有一定的地域特征.     

重庆主城区大气重污染形势的激光雷达探测与分析

2013年1月12日-26日，利用大气超级站ALS300型激光雷达对重庆主城区大气进行了连续探测，分析了重污染形势期间的大气扩散条件及大气颗粒物时空分布等探测结果。分析表明，大气层结持续稳定，扩散条件差使得大气颗粒物浓度居高不下，大气能见度持续恶化；大气重污染期间PBL高度较低，平均为320～350m；大气颗粒物污染带处于100～400m高度范围；全国范围内异常的大气环流形势和重庆主城区独特的地形、气候特征是造成持续大气重污染形势的原因。     

Characterization of ultrafine particle number concentration and size distribution during a summer campaign in southwest Detroit

This paper presents results from a study conducted in southwest Detroit from July 20 to July 30, 2002, to characterize ambient ultrafine particles (dP < 0.1 microm), and to examine the effect of local sources and meteorological parameters on the ultrafine number concentration and size distribution. The number concentrations of ambient particles in the size range of 0.01-0.43 microm were obtained from a scanning mobility particle sizer (SMPS). Meteorological parameters including ambient temperature, relative humidity, wind speed, wind direction, rainfall, and solar radiation flux were also monitored concurrently atop a 10-m tower. On average, ultrafine particles ranged from 1.4 x 10(4) to 2.5 x 10(4) cm(-3), with significant diurnal and daily variations, and accounted for approximately 89% of the total number concentration (0.01 < dP < 0.43 microm). Time-series plots of the 5-min number concentrations revealed that peak concentrations often occurred during morning rush hour and/or around solar noon when photochemical activity was at a maximum. The morning traffic-related peak coincided with the NOx peak, whereas the photochemical-related peak correlated with solar radiation flux. On some days, the noon peak concentration was many times higher than the morning peak concentration. Although the number size distribution varied considerably over the course of the study, it typically exhibited one to three modes, with diameters around 0.01, 0.05, and 0.09 microm. Analysis of the influence of wind direction indicated that stationary sources could be one of the contributors to elevated ultrafine particle concentration. Overall, the data indicated that fossil fuel combustion and atmospheric gas-to-particle conversion of precursor gases are the major sources of ultrafine particles in the southwest Detroit area during the summer.     

Relationships between size segregated mass concentration data and ultrafine particle number concentrations in urban areas

Mass concentration data derived from samples collected with a micro-orifice uniform deposit impactor (MOUDI) in six Australian urban centers during periods of significant particle loading have been used to investigate the relationships between TSP, PM10, PM2.5, PM1 and ultrafine particles. While PM10 and PM2.5 display a clear relationship, the lack of correlation between PM10 and the coarse fraction of PM10 (PM10–PM2.5) suggests that variation in PM10 is dominated by variance in PM2.5. Given that particles of less than 2.5 μm are suspected to have adverse health effects, increasing the extent of PM2.5 monitoring may improve detection of relationships between air pollution and human health. A lack of correlation between both PM10 and PM2.5 with ultrafine mass concentrations indicates that PM10 and PM2.5 cannot be used as a surrogate for ultrafine mass concentration. Similarly, ultrafine number concentrations cannot be inferred from mass concentration information determined by the MOUDI.     

Predominance of soot-mode ultrafine particles in Santiago de Chile: Possible sources

A monitoring campaign was performed in Santiago de Chile during a winter month of 2003 and 2006 (July) using several instruments to measure the size distribution of particulate material. For the first time, the size distribution of ultrafine particles was measured in Santiago, and an estimation of its sources was done by analyzing its temporal variation. The study was performed in three sites; one of them is located in the eastern part of Santiago, a sector with low particle concentration and about 100 m from a busy street. The other site is located in the western part, which is the sector that has the highest concentration of fine and coarse particle matter during winter, also located far from a street. The third site is located within 5 m from the busiest street in Santiago. In all stations traffic is the dominating source for fine and ultrafine particles and the size distribution is peaked towards 60–100 nm (soot mode). Only in the site near the street, it is possible to see a clear peak towards smaller sizes (10–30 nm). The size distribution measurements presented here indicate that aerosol dynamics play a more important role for the Santiago case as compared to cleaner cities in Europe. Changes in the particle size during different hours of the day reflect both variations in meteorological mixing conditions as well as effects of aerosol dynamic processes such as coagulation, condensation and dry deposition. A relative increase in the number of the larger ultrafine particles (d ≥ 70 nm), as compared to the number of smaller particles (d < 70 nm) correlated with wind speed is an indication of pollution transport with aged particles from other parts of the city.     

Combustion aerosols: factors governing their size and composition and implications to human health

Particulate matter (PM) emissions from stationary combustion sources burning coal, fuel oil, biomass, and waste, and PM from internal combustion (IC) engines burning gasoline and diesel, are a significant source of primary particles smaller than 2.5 microns (PM2.5) in urban areas. Combustion-generated particles are generally smaller than geologically produced dust and have unique chemical composition and morphology. The fundamental processes affecting formation of combustion PM and the emission characteristics of important applications are reviewed. Particles containing transition metals, ultrafine particles, and soot are emphasized because these types of particles have been studied extensively, and their emissions are controlled by the fuel composition and the oxidant-temperature-mixing history from the flame to the stack. There is a need for better integration of the combustion, air pollution control, atmospheric chemistry, and inhalation health research communities. Epidemiology has demonstrated that susceptible individuals are being harmed by ambient PM. Particle surface area, number of ultrafine particles, bioavailable transition metals, polycyclic aromatic hydrocarbons (PAH), and other particle-bound organic compounds are suspected to be more important than particle mass in determining the effects of air pollution. Time- and size-resolved PM measurements are needed for testing mechanistic toxicological hypotheses, for characterizing the relationship between combustion operating conditions and transient emissions, and for source apportionment studies to develop air quality plans. Citations are provided to more specialized reviews, and the concluding comments make suggestions for further research.     

Combustion Aerosols: Factors Governing Their Size and Composition and Implications to Human Health

ABSTRACT

Particulate matter (PM) emissions from stationary combustion sources burning coal, fuel oil, biomass, and waste, and PM from internal combustion (IC) engines burning gasoline and diesel, are a significant source of primary particles smaller than 2.5 μm (PM_2.5) in urban areas. Combustion-generated particles are generally smaller than geologically produced dust and have unique chemical composition and morphology. The fundamental processes affecting formation of combustion PM and the emission characteristics of important applications are reviewed. Particles containing transition metals, ultrafine particles, and soot are emphasized because these types of particles have been studied extensively, and their emissions are controlled by the fuel composition and the oxidant-tem-perature-mixing history from the flame to the stack. There is a need for better integration of the combustion, air pollution control, atmospheric chemistry, and inhalation health research communities. Epidemiology has demonstrated that susceptible individuals are being harmed by ambient PM. Particle surface area, number of ultrafine particles, bioavailable transition metals, polycyclic aromatic hydrocarbons (PAH), and other particle-bound organic compounds are suspected to be more important than particle mass in determining the effects of air pollution. Time- and size-resolved PM measurements are needed for testing mechanistic toxicological hypotheses, for characterizing the relationship between combustion operating conditions and transient emissions, and for source apportionment studies to develop air quality plans. Citations are provided to more specialized reviews, and the concluding comments make suggestions for further research.     

Elk River Completes Second Year With Zero Bag Failures Reported

Abstract

This paper presents results from a study conducted in two urban areas of southern California, Downey and Riverside, to examine the effect of different sources and formation mechanisms on the size distribution and temporal trends of ultrafine particles. Near-continuous data were collected for 5 months at each location. Our data clearly identified Downey as a source site, primarily affected by vehicular emissions from nearby freeways, and Riverside as a receptor site, where photochemical secondary reactions form a substantial fraction of particles, along with local vehicular emissions. In Downey, the diurnal trends of total particle number concentration and elemental carbon (EC) appear to be almost identical throughout the day and irrespective of season, thereby corroborating the role of primary emissions in the formation of these particles. This agreement between EC and particle number was not observed in Riverside during the warmer months of the year, while very similar trends to Downey were observed during the winter months in that area. Similarly, the size distribution of ultrafine particles in Downey was generally unimodal with a mode diameter of 30–40 nm and without significant monthly variations. The number-based particle size distributions obtained in Riverside were bimodal, with a significant increase in accumulation mode as the season progressed from winter to summer. During the warmer months, there was also an increase in sub-100-nm particles in the afternoon hours, between 2:00 p.m. and 4:00 p.m., that also increased with the temperature. The differences observed in the ultrafine particle distribution and temporal trends clearly demonstrated that mechanisms other than direct emissions play an important role in the formation of ultrafine particles in receptor sites of the Los Angeles Basin.     

Size distribution and diurnal and seasonal trends of ultrafine particles in source and receptor sites of the Los Angeles basin

This paper presents results from a study conducted in two urban areas of southern California, Downey and Riverside, to examine the effect of different sources and formation mechanisms on the size distribution and temporal trends of ultrafine particles. Near-continuous data were collected for 5 months at each location. Our data clearly identified Downey as a source site, primarily affected by vehicular emissions from nearby freeways, and Riverside as a receptor site, where photochemical secondary reactions form a substantial fraction of particles, along with local vehicular emissions. In Downey, the diurnal trends of total particle number concentration and elemental carbon (EC) appear to be almost identical throughout the day and irrespective of season, thereby corroborating the role of primary emissions in the formation of these particles. This agreement between EC and particle number was not observed in Riverside during the warmer months of the year, while very similar trends to Downey were observed during the winter months in that area. Similarly, the size distribution of ultrafine particles in Downey was generally unimodal with a mode diameter of 30-40 nm and without significant monthly variations. The number-based particle size distributions obtained in Riverside were bimodal, with a significant increase in accumulation mode as the season progressed from winter to summer. During the warmer months, there was also an increase in sub-100-nm particles in the afternoon hours, between 2:00 p.m. and 4:00 p.m., that also increased with the temperature. The differences observed in the ultrafine particle distribution and temporal trends clearly demonstrated that mechanisms other than direct emissions play an important role in the formation of ultrafine particles in receptor sites of the Los Angeles Basin.     

Pronounced decrease of ambient particle number emissions from diesel traffic in Denmark after reduction of the sulphur content in diesel fuel

Measurements of particle number concentration and size distributions in a Copenhagen street canyon in January–March 1999, and one year later in 2000, have revealed that the number of particles in the ultrafine size range below 100 nm decreased significantly in the period between the two campaigns. The decrease was especially large in the size range below 30 nm. By two common factors, we found high co-variance between ultrafine particles, nitrogen oxides, and carbon monoxide. The co-variation can be used to assess the contributions and size distributions of particles from the two main sources, petrol traffic and diesel traffic. Here, we show that the drop in particle concentrations can be consistently explained by a 56% fall in the average particle emission from the diesel vehicles in the street. In the same period, we found no change in the particle emission from petrol cars. The change is probably due to the reduction of the sulphur content in diesel fuel from approximately 0.05% to less than 0.005%, implemented in all parts of Denmark in July 1999.     

Concentrations of ultrafine,fine and PM2.5 particles in three European cities

Total number concentrations, number concentrations of ultrafine (0.01–0.1 μm) and accumulation (0.1–0.5 μm) particles, as well as mass concentration of PM_2.5 particles and blackness of PM_2.5 filters, which is related to Black Smoke were simultaneously monitored in three European cities during the winter period for three and a half months. The purpose of the study was to describe the differences in concentration levels and daily and diurnal variations in particle number and mass concentrations between European cities. The results show statistically significant differences in the concentrations of PM_2.5 and the blackness of the PM_2.5 filters between the cities, but not in the concentrations of ultrafine particles. Daily PM_2.5 levels were found to be poorly correlated with the daily total and ultrafine number concentrations but better correlated with the number concentration of accumulation particles. According to the principal component analysis airborne particulate pollutants seem to be divided into two major source categories, one identified with particle number concentrations and the other related to mass-based information. The present results underline the importance of using both particle number and mass concentrations to evaluate urban air quality.     

Measurements of ultrafine particles and other vehicular pollutants inside a mobile exposure system on Los Angeles freeways

A mobile exposure and air pollution measurement system was developed and used for on-freeway ultrafine particle health effects studies. A nine-passenger van was modified with a high-efficiency particulate air (HEPA) filtration system that can deliver filtered or unfiltered air to an exposure chamber inside the van. State-of-the-art instruments were used to measure concentration and size distribution of fine and ultrafine particles and the concentration of carbon monoxide (CO), black carbon (BC), particle-bound polycyclic aromatic hydrocarbons (PAHs), fine particulate matter (PM2.5) mass, and oxides of nitrogen (NOx) inside the exposure chamber. This paper presents the construction and technical details of the van and air pollutant concentrations collected in 32 2-hr runs on two major Los Angeles freeways, Interstate 405 (1-405; mostly gasoline traffic) and Interstate 710 (1-710; large proportion of heavy-duty diesel traffic). More than 97% of particles were removed when the flow through the filter box was switched from bypass mode to filter mode while the vehicle was driving on both freeways. The filtration system thus provides a great particulate matter exposure contrast while keeping gas-phase pollutant concentrations the same. Under bypass mode, average total particle number concentration observed inside the exposure chamber was around 8.4 x 10(4) and 1.3 x 10(5) particles cm(-3) on the I-405 and the I-710 freeways, respectively. Bimodal size distributions were consistent and similar for both freeways with the first mode around 16-20 nm and the second mode around 50-55 nm. BC and particle-bound PAH concentrations were more than two times greater on the I-710 than on the I-405 freeway. Very weak correlations were observed between total particle number concentrations and other vehicular pollutants on the freeways.