Use of Co speciation and soil properties to explain variation in Co toxicity to root growth of barley (Hordeum vulgare L.) in different soils

The influence of soil properties on the bioavailability and toxicity of Co to barley (Hordeum vulgare L.) root elongation was investigated. Ten soils varying widely in soil properties were amended with seven doses of CoCl₂. Soil properties greatly influenced the expression of Co toxicity. The effective concentration of added Co causing 50% inhibition (EC₅₀) ranged from 45 to 863 mg kg⁻¹, representing almost 20-fold variation among soils. Furthermore, we investigated Co toxicity in relation to Co concentrations and free Co²⁺ activity in soil solution. The EC₅₀ values showed variation among soils of 17- and 29-fold, based on the Co concentration in soil solution and free Co²⁺ activity, respectively. Single regressions were carried out between Co toxicity threshold values and selected soil properties. Models obtained showed that soil effective cation exchange capacity (eCEC) and exchangeable calcium were the most consistent single predictors of the EC₅₀ values based on soil added Co.     

Toxicity of three halogenated flame retardants to nitrifying bacteria, red clover (Trifolium pratense), and a soil invertebrate (Enchytraeus crypticus)

Halogenated flame retardants have a high sorption affinity to particles, making soils and sediments important sinks. Here, three of the most commonly used flame retardants have been tested for sub-lethal toxicity towards soil nitrifying bacteria, a terrestrial plant (seed emergence and growth of the red clover, Trifolium pratense), and a soil invertebrate (survival and reproduction of Enchytraeus crypticus). Tetrabromobisphenol A (TBBPA) was quite toxic to enchytraeids, with significant effects on reproduction detected already at the 10 mgkg(-1) exposure level (EC(10)=2.7 mgkg(-1)). In contrast, decabromodiphenyl ether (DeBDE) was not toxic at all, and short-chain chloroparaffins (CP(10-13)) only affected soil nitrifying bacteria at the highest test concentration (EC(10)=570 mgkg(-1)). Exposure concentrations were verified by chemical analysis for TBBPA and DeBDE, but not for CP(10-13), as a reliable method was not available. Based on the generated data, a PNEC for soil organisms can be estimated at 0.3 mgkg(-1) for TBBPA and 57 mgkg(-1) for short-chain chloroparaffins. No PNEC could be estimated for DeBDE. Measurements of TBBPA in soil are not available, but measured concentrations in Swedish sludge are all lower than the estimated threshold value for biological effects in soil.     

Effects of phenanthrene on the mortality, growth, and anti-oxidant system of earthworms (Eisenia fetida) under laboratory conditions

To assess the toxic effects of phenanthrene on earthworms, we exposed Eisenia fetida to artificial soils supplemented with different concentrations (0.5, 2.5, 12.5, mgkg(-1) soil) of phenanthrene. The residual phenanthrene in the soil, the bioaccumulation of phenanthrene in earthworms, and the subsequent effects of phenanthrene on growth, anti-oxidant enzyme activities, and lipid peroxidation (LPO) were determined. The degradation rate of low concentrations of phenanthrene was faster than it was for higher concentrations, and the degradation half-life was 7.3d (0.5 mgkg(-1)). Bioaccumulation of phenanthrene in the earthworms decreased the phenanthrene concentration in soils, and phenanthrene content in the earthworms significantly increased with increasing initial soil concentrations. Phenanthrene had a significant effect on E. fetida growth, and the 14-d LC(50) was calculated as 40.67 mgkg(-1). Statistical analysis of the growth inhibition rate showed that the concentration and duration of exposure had significant effects on growth inhibition (p<0.001). Superoxide dismutase (SOD) activity increased at the beginning (2 and 7d) and decreased in the end (14 and 28 d). Catalase (CAT) activity in all treatments was inhibited from 1 to 14 d of exposure. However, no significant perturbations in malondialdehyde (MDA) content were noted between control and phenanthrene-treated earthworms except after 2d of exposure. These results revealed that bioaccumulation of phenanthrene in E. fetida caused concentration-dependent, sub-lethal toxicity. Growth and superoxide dismutase activity can be regarded as sensitive parameters for evaluating the toxicity of phenanthrene to earthworms.     

Development of a biotic ligand model (BLM) predicting nickel toxicity to barley (Hordeum vulgare)

A biotic ligand model (BLM) was developed to predict nickel toxicity, affecting root growth of barley (Hordeum vulgare), in nutrient solutions. The extent to which Ca(2+), Mg(2+), Na(+), K(+) ions and pH each influenced nickel toxicity was determined. Higher activities of Mg(2+) linearly increased the 4d EC50 Ni (2+) , while Ca(2+), Na(+), K(+) and H(+) activities did not significantly influence Ni(2+) toxicity. Stability constants for the binding of Ni(2+) and Mg(2+) to the biotic ligand were obtained: logK(NiBL)=5.27 and logK(MgBL)=3.47. Further, it was calculated that on average 57% of the biotic ligand sites needed to be occupied by nickel to induce 50% root growth inhibition. Auto-validation of the BLM indicated that predicted EC50s differed from the observed EC50s by a factor of less than 2, indicating that the BLM concept may also be used to predict metal toxicity to terrestrial plants.     

Predicting molybdenum toxicity to higher plants: Estimation of toxicity threshold values

Four plant species (oilseed rape, Brassica napus L.; red clover, Trifolium pratense L.; ryegrass, Lolium perenne L.; and tomato, Lycopersicon esculentum L.) were tested on ten soils varying widely in soil properties to assess molybdenum (Mo) toxicity. A larger range (66-fold-609-fold) of added Mo concentrations resulting in 50% inhibition of yield (ED₅₀) was found among soils than among plant species (2-fold-38-fold), which illustrated that the soils differed widely in the expression of Mo toxicity. Toxicity thresholds based on soil solution Mo narrowed the variation among soils compared to thresholds based on added Mo concentrations. We conclude that plant bioavailability of Mo in soil depends on Mo solubility, but this alone did not decrease the variability in observed toxicity enough to be used in risk assessment and that other soil properties influencing Mo toxicity to plants need to be considered.     

Development and validation of a terrestrial biotic ligand model predicting the effect of cobalt on root growth of barley (Hordeum vulgare)

A Biotic Ligand Model was developed predicting the effect of cobalt on root growth of barley (Hordeum vulgare) in nutrient solutions. The extent to which Ca(2+), Mg(2+), Na(+), K(+) ions and pH independently affect cobalt toxicity to barley was studied. With increasing activities of Mg(2+), and to a lesser extent also K(+), the 4-d EC50(Co2+) increased linearly, while Ca(2+), Na(+) and H(+) activities did not affect Co(2+) toxicity. Stability constants for the binding of Co(2+), Mg(2+) and K(+) to the biotic ligand were obtained: logK(CoBL)=5.14, logK(MgBL)=3.86 and logK(KBL)=2.50. Limited validation of the model with one standard artificial soil and one standard field soil showed that the 4-d EC50(Co2+) could only be predicted within a factor of four from the observed values, indicating further refinement of the BLM is needed.     

Effect of DDT on plant mineral nutrition

DDT added to soil at a concentration of 50 microg g(-1) had no inhibitory effects on germination and plant growth of barley, mung and rice, but considerably inhibited the oilseed species tested in the laboratory. The uptake of one or other ions was affected in varying degrees, with plants grown in DDT-treated soils. Detailed field studies of a peanut crop further confirmed the inhibition of ion uptake with DDT, especially Ca(2+) and K(+). Reduced uptake of (86)Rb by germinated peanut seeds in the presence of DDT further supported the observations made with K(+). Cell number and length in plants were reduced in plants grown in DDT-treated soil and the role of calcium is discussed. It appears that growth inhibition in oil seed plants may arise from the low levels of Ca(2+) and K(+) in plants grown in DDT-treated soils.     

Toxicological response of a bioluminescent microbial assay to Zn, Pb and Cu in an artificial soil solution: relationship with total metal concentrations and free ion activities.

The relationship between toxicological response and both total concentrations and free ion activities of Pb, Cu and Zn in an artificial soil solution has been investigated using lux-marked Escherichia coli HB101 (pUCD607) as a bioassay. SO4(2-) (as K2SO4) was added as an inorganic complexing agent up to 0.01 M representing the range of ionic strengths found in soil solutions and giving a wide range of free metal ion activities. EC50 values expressed in terms of concentration, varied significantly with K2SO4 molarity for all metals. However, when EC50 values were expressed in terms of free ion activity they were not significantly different for Pb and Zn, supporting the free ion activity model. Conversely, EC50 values expressed as free Cu activity did vary significantly with K2SO4 molarity, possibly due to a greater degree of adsorption of Cu onto inactive sites on the cell surfaces than for Zn and Pb. Linear regression analysis of bioluminescence on free ion activity revealed significant correlations for each metal above the toxicity threshold. In conclusion, lux-marked E. coli is suitable for investigating the toxicity of metal ions and complexes in non saline systems although cell surface adsorption effects could be important for some metals, e.g. Cu.     

Phytotoxicity of nitroaromatic energetic compounds freshly amended or weathered and aged in sandy loam soil

The toxicities of 2,4,6-trinitrotoluene (TNT), 1,3,5-trinitrobenzene (TNB), 2,4-dinitrotoluene (2,4-DNT), and 2,6-dinitrotoluene (2,6-DNT) to terrestrial plants alfalfa (Medicago sativa L.), Japanese millet (Echinochloa crusgalli L.), and perennial ryegrass (Lolium perenne L.) were determined in Sassafras sandy loam soil using seedling emergence, fresh shoot, and dry mass measurement endpoints. A 13-week weathering and aging of energetic materials in soils, which included wetting and drying cycles, and exposure to sunlight of individual soil treatments, was incorporated into the study design to better reflect the soil exposure conditions in the field than toxicity determinations in freshly amended soils. Definitive toxicity tests showed that dinitrotoluenes were more phytotoxic for all plant species in freshly amended treatments based on EC20 values for dry shoot ranging from 3 to 24mgkg(-1) compared with values for TNB or TNT ranging from 43 to 62mgkg(-1). Weathering and aging of energetic materials (EMs) in soil significantly decreased the toxicity of TNT, TNB or 2,6-DNT to Japanese millet or ryegrass based on seedling emergence, but significantly increased the toxicity of all four EMs to all three plant species based on shoot growth. Exposure of the three plant species to relatively low concentrations of the four compounds initially stimulated plant growth before the onset of inhibition at greater concentrations (hormesis).     

Terrestrial ecotoxicity and effect factors of metals in life cycle assessment (LCA)

Life cycle impact assessment aims to translate the amounts of substance emitted during the life cycle of a product into a potential impact on the environment, which includes terrestrial ecosystems. This work suggests some possible improvements in assessing the toxicity of metals on soil ecosystems in life cycle assessment (LCA). The current available data on soil ecotoxicity allow one to calculate the chronic terrestrial HC50(EC50) (hazardous concentration affecting 50% of the species at their EC50 level, i.e. the level where 50% of the individuals of the species are affected) of nine metals and metalloids (As(III) or (V), Be(II), Cr(III) or (VI), Sb(III) or (V), Pb(II), Cu(II), Zn(II) and Ni(II)). Contrarily to what is generally advised in LCIA, the terrestrial HC50 of metals shall not be extrapolated from the aquatic HC50, using the Equilibrium Partitioning method since the partition coefficient (K(d)) of metals is highly variable. The experimental ecotoxicology generally uses metallic salts to contaminate artificial soils but the comparison of the EC50 or NOEC obtained for the same metal with different salts reveals that the kind of salt used insignificantly influences these values. In contrast, depending on the metallic fraction of concern, the EC50 may vary, as for cadmium: the EC50 of Folsomia candida, expressed as free Cd in pore water is almost 2.5 orders of magnitude lower than that expressed as total metal. A similar result is obtained with Eisenia fetida, confirming the importance of metals speciation in assessing their impact on soils. By ranking the metals according to the difference between their terrestrial and aquatic HC50 values, two groups are distinguished, which match the hard soft acids and bases (HSAB) concept. This allows to estimate their affinity for soil components and potential toxicity according to their chemical characteristics.     

The influence of time on lead toxicity and bioaccumulation determined by the OECD earthworm toxicity test

Internationally agreed standard protocols for assessing chemical toxicity of contaminants in soil to worms assume that the test soil does not need to equilibrate with the chemical to be tested prior to the addition of the test organisms and that the chemical will exert any toxic effect upon the test organism within 28 days. Three experiments were carried out to investigate these assumptions. The first experiment was a standard toxicity test where lead nitrate was added to a soil in solution to give a range of concentrations. The mortality of the worms and the concentration of lead in the survivors were determined. The LC50s for 14 and 28 days were 5311 and 5395 microgPb g(-1)soil respectively. The second experiment was a timed lead accumulation study with worms cultivated in soil containing either 3000 or 5000 microgPb g(-1)soil. The concentration of lead in the worms was determined at various sampling times. Uptake at both concentrations was linear with time. Worms in the 5000 microg g(-1) soil accumulated lead at a faster rate (3.16 microg Pb g(-1)tissue day(-1)) than those in the 3000 microg g(-1) soil (2.21 microg Pb g(-1)tissue day(-1)). The third experiment was a timed experiment with worms cultivated in soil containing 7000 microgPb g(-1)soil. Soil and lead nitrate solution were mixed and stored at 20 degrees C. Worms were added at various times over a 35-day period. The time to death increased from 23 h, when worms were added directly after the lead was added to the soil, to 67 h when worms were added after the soil had equilibrated with the lead for 35 days. In artificially Pb-amended soils the worms accumulate Pb over the duration of their exposure to the Pb. Thus time limited toxicity tests may be terminated before worm body load has reached a toxic level. This could result in under-estimates of the toxicity of Pb to worms. As the equilibration time of artificially amended Pb-bearing soils increases the bioavailability of Pb decreases. Thus addition of worms shortly after addition of Pb to soils may result in the over-estimate of Pb toxicity to worms. The current OECD acute worm toxicity test fails to take these two phenomena into account thereby reducing the environmental relevance of the contaminant toxicities it is used to calculate.     

Does monensin in chicken manure from poultry farms pose a threat to soil invertebrates?

Monensin is a carboxylic polyether ionophore used in the poultry industry as a coccidiostat. It enters the environment via manure from broiler farms. In spite of its potential presence in the environment, information concerning monensin residues in manure and soil and its toxicity to soil organisms are insufficient. In the present study, two beneficial soil invertebrate species, earthworms (Eisenia andrei) and woodlice (Porcellio scaber), were used to assess the toxicity of monensin. Animals were exposed to a range of monensin concentrations via soil or food. Earthworm reproduction was found to be the most susceptible endpoint (NOEC=3.5 mg kg(-1) dry soil; EC(50)=12.7 mg kg(-1) dry soil), while no adverse effects were recorded in isopods (NOEC?849mgkg(-1) dry soil, NOEC?357mgkg(-1) dry food). The obtained toxicity data were compared with potential concentrations of monensin in soil. In view of this, manure from broiler chickens treated with monensin at a poultry farm was sampled. According to monensin and nitrogen concentrations in the chicken manure and the degradation time of monensin, the predicted environmental concentration (PEC) was calculated. PEC of monensin is around 0.013 mg kg(-1) soil if manure is used after 3 months of composting and 0.05 mg kg(-1) soil if used without storage. Data for earthworm reproduction was used to estimate the predicted no-effect concentration (PNEC). If fresh chicken manure is applied to terrestrial ecosystems, the risk quotient (PEC/PNEC ratio) is above 1, which indicates that monensin might pose an environmental risk under certain conditions. To prevent this, it is strongly recommended to compost chicken manure for several months before using it as fertiliser.     

Toxicity of eight polycyclic aromatic compounds to red clover (Trifolium pratense), ryegrass (Lolium perenne), and mustard (Sinapsis alba)

The effect of eight polycyclic aromatic compounds (PACs) on the seed emergence and early life-stage growth of three terrestrial plants (Sinapsis alba, Trifolium pratense and Lolium perenne) were studied in a greenhouse, using a Danish agricultural soil with an organic carbon content of 1.6%. After three weeks of exposure, seed emergence and seedling weight (fresh weight and dry weight) were determined. Exposure concentrations were verified with chemical analysis. The substances tested were four polycyclic aromatic hydrocarbons (fluoranthene, pyrene, phenanthrene and fluorene), the N-, S-, and O-substituted analogues of fluorene (carbazole, dibenzothiophene and dibenzofuran, respectively), and the quinoline representative acridine. Seedling growth was a far more sensitive endpoint than seed emergence for all substances. Concentrations estimated to give a 20% reduction of seedling fresh weight (EC20-values) ranged from 36 to 290 mgkg(-1) for carbazole, 43 to 93 mgkg(-1) for dibenzofuran, 37 to 110 mgkg(-1) for dibenzothiophene, 140 to 650 mgkg(-1) for fluoranthene, 55 to 380 mgkg(-1) for fluorene, 37 to 300 mgkg(-1) for phenanthrene, and 49 to 1300 mgkg(-1) for pyrene. For acridine, no toxicity was observed within the concentration range tested (1-1000 mgkg(-1)). As illustrated by the EC20-values, there was a rather large difference in sensitivity between the species, and T. pratense was the most sensitive of the species tested.     

Investigations of chemical fraction of Co and Ni in industrial fly ash and mobility of metals in environmental conditions

The quantitative evaluation of chemical fraction of Co and Ni in the industrial fly ash by methods of five step sequential extraction was carried out in order to characterize metal mobility in environmental conditions. The research involved (i) water-soluble (pH=7), (ii) acid-soluble (pH=5), (iii) oxide, (iv) sulfide and (v) residue metal fractions. It was discovered, that the total extraction of the studied metals from fly ash to solutions take place in the following quantities Co - 35.5 and Ni - 153.0mgkg(-1). The investigations of chemical fractions proved that the subject metals occur mainly in fly ash as: oxide (Co - 7.0, Ni - 28.5mgkg(-1)) and residue (Co - 11.5, Ni - 42.5mgkg(-1)) as well as sulfide (Co - 8.5, Ni - 46.5mgkg(-1)). Low concentrations of metals for water-soluble fraction (Co - 0.7, Ni - 1.2mgkg(-1)) and acid-soluble fraction (Co - 4.5, Ni - 23.5mgkg(-1)) were observed. The fractions of Co and Ni leachable from the ash in environmental conditions contain: 24.0% (Co) and 23.3% (Ni) of metal total amount in the industrial fly ash. The obtained mobility parameter of Co and Ni can be applied to estimate the concentration increase of mobile and hardly mobile forms of these metals in soil polluted with the ash.     

Genotypic and environmental variation in chromium, cadmium and lead concentrations in rice

Genotypic and environmental variation in Cr, Cd and Pb concentrations of rice grains and the interaction between these metals were investigated by using 138 rice genotypes grown in three contaminated soils. There were significant genotypic differences in the three heavy metal concentrations of rice grains, with the absolute difference among 138 genotypes in grain Cr, Cd and Pb concentrations being 24.5-, 9.1- and 23.8-folds, respectively, under the slightly contaminated soil (containing 4.61mgkg(-1) Cr, 1.09mgkg(-1) Cd and Pb 28.28mgkg(-1), respectively). A highly significant interaction occurred between genotype and environment (soil type) in the heavy metal concentrations of rice grains. Cr concentration in rice grains was not correlated with Cd and Pb concentration. However, there was a significant correlation between Cd and Pb in slightly and highly contaminated soils. The results suggest the possibility to develop the rice cultivars with low Cd and Pb concentrations in grain.     

Improving ecological risk assessment by including bioavailability into species sensitivity distributions: an example for plants exposed to nickel in soil

The variability of species sensitivity distribution (SSD) due to contaminant bioavailability in soil was explored by using nickel as metal of concern. SSDs of toxicity test results of Avena sativa L. originating from different soils and expressed as total content and available (0.01 M CaCl2) extractable concentration were compared to SSDs for terrestrial plants derived from literature toxicity data. Also the 'free' nickel (Ni2+) concentration was calculated and compared. The results demonstrated that SSDs based on total nickel content highly depend on the experimental conditions set up for toxicity testing (i.e. selected soil and pH value) and thus on metal bioavailability in soil, resulting in an unacceptable uncertainty for ecological risk estimation. The use in SSDs of plant toxicity data expressed as 0.01 M CaCl2 extractable metal strongly reduced the uncertainty in the SSD curve and thus can improve the ERA procedure remarkably by taking bioavailability into account.     

The influence of organic amendment and nickel pollution on tomato fruit yield and quality

The effects of organic fertilization (sludge application) and/or different levels of Ni pollution on tomato fruit yield, quality, nutrition, and Ni accumulation were investigated. The mass loading of sewage sludge solids used in this study for the amendment of a calcareous soil with low organic matter content was 2% (w/w). A control with no sewage sludge amendment was also included (S). Nickel was added to the sludge amended soil at 0, 60, 120 and 240 mg kg-1 concentrations. Sewage sludge addition to the calcareous soil significantly increased fruit yield but did not adversely affect the quality and nutritional status of the tomato fruit. The results demonstrated that sewage sludge could be successfully used as a horticultural fertilizer. Only the highest addition rate of Ni (240 mg kg-1) to an organic amended calcareous soil had negative effects on fruit yield and quality, and caused a Ni accumulation in fruit that could be considered as a hazard for human health. Thus, no toxic problems will be encountered in tomato fruit due to Ni pollution provided the total Ni (soil Ni plus Ni incorporated with sludge amendment) concentration is kept below the maximum concentration of Ni allowed for agricultural alkaline soils in Spain (112 mg Ni kg-1).     

Use of a general toxicity test to predict heavy metal concentrations in residential soils

Significant clusters of developmental delay and mental retardation (DD/MR) were identified in children born in South Carolina. Although it is difficult to identify one factor that causes DD/MR, environmental insult including exposure of pregnant women to heavy metals can induce DD/MR in their children. Because it is expensive to measure the concentrations of individual metals in large numbers of environmental samples, the general Microtox toxicity test was used to identify highly toxic soil samples. Approximately 100 soil samples were collected from residential areas and analyzed to determine an effective concentration (EC(50)) of soil required to inhibit 50% light emission of the luminescent bacterial test organism (Vibrio fischeri). The EC(50) values were then transformed to relative toxicity units (RTU). A subset of 56 high and low toxicity soil samples was then analyzed by inductively coupled plasma-atomic emission spectrometry (EPA method 6010) for arsenic, lead, and chromium, which are known neurotoxins. The highest measured arsenic concentration was 30 times higher than the South Carolina residential soil limit. Significant correlations were found between the RTU and soil arsenic and chromium concentrations. Microtox also identified some low arsenic and chromium samples as toxic, presumably because additional unidentified toxicants were present in the soil. In general, however, the Microtox test was effective in identifying soils with elevated concentrations of arsenic and chromium, even in residential neighborhoods where limited soil toxicity was expected.     

Ecotoxicity of nickel to Eisenia fetida, Enchytraeus albidus and Folsomia candida

Despite growing concern about the potential adverse effects of elevated nickel concentrations in the environment, only a few toxicity data are available for terrestrial invertebrates. Therefore, chronic toxicity of nickel was assessed for Eisenia fetida, Enchytraeus albidus and Folsomia candida, the three invertebrates for which standard test protocols are available. The 21 d EC50 for the cocoon production of E. fetida was 362 (241-508) mg Ni/kg dry wt. For the reproduction of E. albidus, a 42 d EC50 of 275 (217-346) mg Ni/kg dry wt was observed. The 28 d EC50 for the reproduction of F. candida was 476 (347-671) mg Ni/kg dry wt. The obtained toxicity data were very similar to those of related species reported in literature. Although the presented data can be considered as a step forward in the assessment of the potential risks of nickel in terrestrial environments, further research is needed to evaluate the influence of soil parameters on the toxicity of nickel and to quantify the effect of ageing on bioavailability.     

Is the OECD acute worm toxicity test environmentally relevant? The effect of mineral form on calculated lead toxicity

In a series of experiments the toxicity of lead to worms in soil was determined following the draft OECD earthworm reproduction toxicity protocol except that lead was added as solid lead nitrate, carbonate and sulphide rather than as lead nitrate solution as would normally be the case. The compounds were added to the test soil to give lead concentrations of 625-12 500 microg Pb g(-1) of soil. Calculated toxicities of the lead decreased in the order nitrate> carbonate> sulphide, the same order as the decrease in the solubility of the metal compounds used. The 7-day LC50 (lethal concentration when 50% of the population is killed) for the nitrate was 5321+/-275 microg Pb g(-1) of soil and this did not change with time. The LC50 values for carbonate and sulphide could not be determined at the concentration ranges used. The only parameter sensitive enough to distinguish the toxicities of the three compounds was cocoon (egg) production. The EC50s for cocoon production (the concentration to produce a 50% reduction in cocoon production) were 993, 8604 and 10246 pg Pb g(-1) of soil for lead nitrate, carbonate and sulphide, respectively. Standard toxicity tests need to take into account the form in which the contaminant is present in the soil to be of environmental relevance.