共查询到20条相似文献,搜索用时 951 毫秒
1.
对激光的特性及对人体组织损伤进行了描述,特别是对眼睛,皮肤,皮下组织及内部器官的危害及防护办法作了介绍。 相似文献
2.
3.
王立杰 《中国个体防护装备》1999,(1)
随着激光技术在国民经济各领域的广泛应用,由激光引起的致盲、白内障、视网膜受损伤等疾病逐年增多,并给各种光电传感器造成了很大威胁。 为对其实施有效的激光防护,免受激光辐射而致盲,多年来,长春光机学院开展了防激光特种光学塑料的系列研究。特别是在“八五”期间,研制出防激光性能好、能见度高、并兼有抵御碎弹片冲击的多功能防激光特种光学塑料。该成果达到了国际九十年代先进水平,荣获一九九八年兵器工业科学技 相似文献
4.
5.
6.
激光技术从六十年代初问世以来,在不少工业领域内已被广泛使用,主要用作激光切割、划线、打孔、焊接和激光全息术等。在日常生产、科研和教学中,激光也显示出实用价值。因此,了解激光对人的影响及其安全防护知识,非常必要。 一、激光对人的危 害 激光对人体损伤的机理,目前较为一致的看法有热效应、光压效应和光化学效应三种。热效应是指激光在人体某点聚焦时,功率密度达到10 9瓦/厘米2,照射区的压力可达40克/厘米2,使光能转变为热能,在瞬间产生的热量,使组织细胞发生膨胀,受照区压强可达几十至几百大气压,组织细胞即遭到严重挤压或撕裂。光… 相似文献
7.
商景林 《中国个体防护装备》2015,(1):50
ISO/TC94/SC6/WG4是国际标准化组织个体防护装备眼面部防护分技术委员会职业防护工作组的简称,该工作组主要负责职业眼面防护具标准的制修订,如防冲击眼护具、焊接眼护具、激光眼护具、强光源防护具等。ISO/TC94/SC6/WG4会议于2014年12月3日在美国克利尔沃特举行。由于此次会议讨论的新ISO标准(ISO/PWI 16321 Occupational 相似文献
8.
为评估并提高锂电池在使用、储存和运输过程中的安全,本文归纳总结了国内外锂电池安全检测的相关标准,对标准中测试项目异同作了重点分析和对比,并讨论了锂电池的安全风险及风险分级情况。同时,鉴于锂电池检测过程中可能出现的起火、爆炸等危险,探讨了电池检测过程的安全防护技术,并从样品区和试验区两方面提出了安全防护要求和建议。 相似文献
9.
10.
李晓东韩鸿 《铁路节能环保与安全卫生》2016,(4):210-212
本文分析了传统的冲床、剪机、折弯机等设备安全防护装置的弊端,列举了激光自动测距装置的优越性。为冲床等类设备的安全防护提供了全新的思路和手段,值得同行业推广使用。 相似文献
11.
基于Petri网的铁路车站安全防护系统建模及可靠性分析 总被引:2,自引:2,他引:0
郑伟 《中国安全科学学报》2009,19(9)
采用单一的随机Petri网对车站线路结构、列车运行过程及车站防护系统建模,基于欧洲电工标准委员会定义的安全目标,确定车站安全防护系统的可靠性需求。对无防护系统的列车入站进行建模和分析,然后基于防护系统功能及可靠性特性,结合列车入站动态特性,对防护系统的功能和可靠性进行建模,并根据安全目标与车站事故率之间的数学关系进行系统的安全分析和可用性分析。其结果表明,车站防护系统的可靠性与乘客的个人风险存在着定量的关系,从而可以依据个人风险的标准来确定防护系统可靠性需求。 相似文献
12.
13.
徐超 《中国安全科学学报》1994,(4)
探讨了劳动保护法规的特性、作用和现状,并就劳动保护法规建设提出了建议。力图引起劳动保护立法界人士和工作者的注意,推动劳动保护法规建设与市场经济同步发展。 相似文献
14.
我国消防标准体系分析 总被引:6,自引:2,他引:4
为明确我国消防标准体系发展的方向和重点,分别从消防标准的数量、标龄、类型、属性和采标情况等5个方面对我国消防标准体系进行分析,并与国际标准化组织、欧盟标准化委员会和美国的消防标准体系进行了比较。研究结果表明:我国消防标准体系整体适用性在不断增强;需制定周期性标准复审计划;消防基础试验类和管理类标准应成为下一步消防标准制修订的重点;消防强制性标准所占比例有待进一步下调;需建立国际标准动态跟踪机制,同时应注重将我国先进的消防标准转化为国际标准。 相似文献
15.
16.
Since the inception of the process industries, there have been a great number of process incidents causing significant loss of life and property damage. Even the establishment and implementation of a series of rigorous regulations has not prevented the occurrence of process incidents. In order to protect people, property and the environment a more robust safety program is needed and the safety performance of process industries must continue to improve. In this work, the common ground and the unique characteristics of process safety engineering (PSE) and fire protection engineering (FPE) is reviewed to demonstrate the potential benefits of unifying the two fields or improving the coordination between them to create a more robust safety program, thereby enhancing the safety performance of process industries. Recommendations are made to facilitate and encourage continued discussion and efforts toward the integration of process safety engineering and fire protection engineering. 相似文献
17.
18.
结合工程实践,简要阐述了原料场水雾降尘设计中应注意的问题、方法,以及洒水喷枪的工作原理、性能要求以解决环境保护问题。 相似文献
19.
古建筑火灾会造成重大财产和文化损失,一直是我国消防工作中的重点和难点问题。我国古建筑消防相关法规与技术体系建设起步较晚,发展速度较慢。近年来我国文物保护部门与消防部门加强对古建筑消防法规与技术体系建设,颁布了一系列法规与规范,为我国古建筑消防事业发展提供了法律和技术依据。本文对我国古建筑火灾特点进行分析,阐述了我国古建筑消防法规与技术规范发展历程,并对其中存在制度单一,灵活性差;发展滞后,内容不完善;体系封闭,社会参与不足等问题进行了分析与探讨,为进一步研究提供了一定的参考价值。 相似文献
20.
Behavior of dust/air mixtures is very complex and difficult to predict since it depends on material properties as well as boundary conditions. Without other influences airborne particles deposit due to gravity but the time it takes for total deposition as well as easiness of resurrection depends very much on the specific dust sample and the boundary conditions. It still lacks a complete understanding of all interacting reasons and one approach is using experimentally determined characteristics, one is named dustiness.Dustiness is the tendency of dust to form clouds and to stay airborne. Dustiness is determined with two basic principles, which are light attenuation and ratio of filled-in and measured mass. Assessment of dustiness of industrial powders has been done for a long time regarding work place safety. Dustiness is used there to determine inhalable fraction and to evaluate health risks. Lately it became interesting in dust explosion protection as well. Dustiness could be used to optimize determination of zones, adaption of venting area and/or for positioning of suppression systems.Dustiness can be useful in many ways but is not a physical property of dusts, therefore it depends on material properties such as density, particle size distribution, shape and water content as well as boundary conditions or determination method. This makes it very difficult to compare dustiness for different techniques and apparatuses and determination method as well as results should be considered carefully. This work gives an overview of existing standards, recent research and suggests improvements to the new dustiness as proposed for dust explosion protection. 相似文献