Safe management of hazardous waste

The size and the health significance of the hazardous waste problem are reviewed. Proper engineering and management practice are discussed, including the elimination, if possible, reduction, changing processes and product lines, treatment and reuuse, and disposal by landfill and incineration. Exports should be drasti cally reduced, also using complex administrative measures. International organizations concerned should encourage good national and international management practices. A siting for collection, treatment and disposal, remote from human habitation, and established under an international agreement, would release countries from managing a difficult problem within their own national borders.     

Web‐based automated remediation performance monitoring and visualization of contaminant mass flux and discharge

Environmental monitoring, data processing, and reporting methods are expensive, labor‐ and resource‐intensive, time‐consuming, and often inaccurate. An innovative project management platform was developed for integrating environmental monitoring sensors, telemetry, geographical information systems, models, and geostatistical algorithms for automatically generating contour maps and time‐stamped renderings of sensor attributes and multivariate analyses. More specifically, algorithms converting sensor‐derived head and solute concentration values allow for automated monitoring of mass flux and discharge to evaluate groundwater remediation system performance and contaminant discharges from aquifers to surface‐water receptors. Life‐cycle costs and carbon footprints were reduced due to the elimination of energy and labor expenditures associated with transportation, data collection, laboratory efforts, report generation, and information dissemination. A brief summary of two demonstrations of this sensor‐based water resources management application is presented. © 2011 Wiley Periodicals, Inc.     

Recent Sediment of Lake Bled (NW Slovenia): Sedimentological and Geochemical Properties

Sediment cores collected in eutrophic subalpine Lake Bled (NW Slovenia) were analyzed sedimentologically in terms of grain size, mineralogy and sedimentation rates, and geochemically in terms of metals and nutrients. Surficial sediment is composed of dark gyttya type clayey silt with 5%–10% of organic matter. The sediment below is fine laminated and composed of homogenous silt and clayey silt: Mineralogically, low-Mg calcite prevails, followed by dolomite, quartz, partially of diatomaceous origin, and feldspar. Clay minerals are composed of muscovite/illite and chlorite. Authigenic minerals are pyrite and ‘lake chalk’ (low-Mg calcite). Lake sediment is especially polluted by Pb, Zn and P. Higher contents were found in the northwestern and eastern parts due to the particle input by local inflows. Increasing eutrophication and pollution, indicated by Cd, Cu, V, Cr, Co and total N and P enrichment in the top layers of the cores, started almost 100 years B.P., and especially 50 years ago.     

《循环经济促进法》施行效果评估分析

《循环经济促进法》正式施行以来,循环经济法规制度体系逐渐完善,循环经济发展模式日趋成熟,循环经济试点工作进展显著,催生了一批符合循环经济要求的新技术和工艺。但是也存在着循环经济发展地区间尚不平衡,配套法规规章和规范性文件尚不健全,支撑体系尚较薄弱,激励措施和相关政策有待完善等问题。为此,要抓紧制定完善配套法规、规章和标准,进一步理顺体制机制,加快出台循环经济发展规划和经济激励政策,强化关键技术研发,全面推广循环经济发展典型模式,积极培育循环经济服务产业,加快相关支撑体系建设。     

Sugarcane vinasse: Environmental implications of its use

The inadequate and indiscriminate disposal of sugarcane vinasse in soils and water bodies has received much attention since decades ago, due to environmental problems associated to this practice. Vinasse is the final by-product of the biomass distillation, mainly for the production of ethanol, from sugar crops (beet and sugarcane), starch crops (corn, wheat, rice, and cassava), or cellulosic material (harvesting crop residues, sugarcane bagasse, and wood). Because of the large quantities of vinasse produced, alternative treatments and uses have been developed, such as recycling of vinasse in fermentation, fertirrigation, concentration by evaporation, and yeast and energy production. This review was aimed at examining the available data on the subject as a contribution to update the information on sugarcane vinasse, from its characteristics and chemical composition to alternatives uses in Brazil: fertirrigation, concentration by evaporation, energy production; the effects on soil physical, chemical and biological properties; its influence on seed germination, its use as biostimulant and environmental contaminant. The low pH, electric conductivity, and chemical elements present in sugarcane vinasse may cause changes in the chemical and physical–chemical properties of soils, rivers, and lakes with frequent discharges over a long period of time, and also have adverse effects on agricultural soils and biota in general. Thus, new studies and green methods need to be developed aiming at sugarcane vinasse recycling and disposal.     

How shell cleaned up a 400,000-gallon oil spill

On April 23, 1988, approximately 9,500 barrels (400,000 gallons) of San Joaquin Valley crude oil leaked from an aboveground storage tank at Shell Oil Company's Martinez Manufacturing Complex in Martinez, California and entered Suisun Bay, an important recreation area. This article describes the remediation techniques Shell used to protect and clean up the Bay's oiled marshes, sloughs, rocky shores, marinas, and sandy beaches, and discusses the main methods of oil spill response, site-specific factors that must be considered in choosing remediation techniques, the interaction between Shell and government agencies, and the costs associated with the spill. The cleanup's total cost was approximately $8.3 million, which did not include private claims and claims handling costs; Shell also signed a separate consent decree for $19.75 million with the state of California and the federal government. This spill and its aftermath emphasize the need for preparation that facilitates response actions, improves the chances for cooperation between responsible parties and government agencies, minimizes the time needed for remediation, lowers cleanup costs, and limits natural resource damage claims and penalties.     

Aging properties of extruded high-amylose starch

The structural and mechanical properties of extruded high-amylose and normal cornstarch were studied as a function of time and humidity to determine the suitability of high-amylose cornstarch for use in biodegradable plastic materials. After extrusion at 170°C and 20–30% moisture, high-amylose starch was mostly amorphous, with small amounts of V- and A-type crystal structures. Tensile strengths for the extruded high-amylose starch ribbons were rather stable with time (65, 50, and 35 MPa at 20, 50, and 80% RH) and were higher than those for normal cornstarch (25, 40, and 15 MPa after 84 days at 20, 50, and 80% RH). Elongations at break declined gradually with time for high-amylose starch (6, 11, and 11% after 84 days at 20, 50, and 80% RH), while rapid declines were seen for normal cornstarch at higher humidities (3, 9, and 3% after 84 days at 20, 50, and 80% RH). Differential scanning calorimetry revealed that normal cornstarch aged at a high humidity had much larger sub-T _g endotherms than high-amylose cornstarch. These endotherms reflect decreases in enthalpy and free volume which occur in amorphous polymers due to structural relaxation. It appears, therefore, that plastic materials prepared from gelatinized or melted high-amylose cornstarch should have greater strength and flexibility and slower physical aging than those prepared from gelatinized normal cornstarch.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Product names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Recycling plastics from automotive shredder residues: a review

Automotive shredder residue (ASR) is an inevitable by-product of car recycling, i.e. removal of all liquids and hazardous or valuable components from the car and shredding of the hulk, followed by the recovery of steel, iron, and non-ferrous scrap. The European Union (EU) ELV Directive requires attaining higher recovery and recycling rates, resulting in a reduction of the amount of ASR going to landfill. The most plausible methods to achieve a considerable reduction of ASR are as follows: either recycling of separated materials and dismantled bulky parts, such as bumpers, dashboards, cushions, and front and rear windows, or else systematic sorting of the commingled and size-reduced materials, resulting from shredding. After a brief comparison of the actual situation in the EU, the USA, and Japan, the characteristics of actual ASR are reviewed, as well as some of the most prominent efforts made to separate and recycle specific fractions, such as polyolefins, ABS, or polyurethane. Attention is paid to some major players in the EU and to some of the pitfalls that besiege these ventures.     

Medical waste management in Ibadan, Nigeria: obstacles and prospects

Quantification and characterization of medical waste generated in healthcare facilities (HCFs) in a developing African nation has been conducted to provide insights into existing waste collection and disposal approaches, so as to provide sustainable avenues for institutional policy improvement. The study, in Ibadan city, Nigeria, entailed a representative classification of nearly 400 healthcare facilities, from 11 local government areas (LGA) of Ibadan, into tertiary, secondary, primary, and diagnostic HCFs, of which, 52 HCFs were strategically selected. Primary data sources included field measurements, waste sampling and analysis and a questionnaire, while secondary information sources included public and private records from hospitals and government ministries. Results indicate secondary HCFs generate the greatest amounts of medical waste (mean of 10,238 kg/day per facility) followed by tertiary, primary and diagnostic HCFs, respectively. Characterised waste revealed that only approximately 3% was deemed infectious and highlights opportunities for composting, reuse and recycling. Furthermore, the management practices in most facilities expose patients, staff, waste handlers and the populace to unnecessary health risks. This study proffers recommendations to include (i) a need for sustained cooperation among all key actors (government, hospitals and waste managers) in implementing a safe and reliable medical waste management strategy, not only in legislation and policy formation but also particularly in its monitoring and enforcement and (ii) an obligation for each HCF to ensure a safe and hygienic system of medical waste handling, segregation, collection, storage, transportation, treatment and disposal, with minimal risk to handlers, public health and the environment.     

Integrating the Social Dimension in Remediation Decision‐Making: State of the Practice and Way Forward

Sustainable remediation guidance, frameworks, and case studies have been published at an international level illustrating established sustainability assessment methodologies and successful implementation. Though the terminology and indicators evaluated may differ, one common theme among international organizations and regulatory bodies is more comprehensive and transparent methods are needed to evaluate the social sphere of sustainable remediation. Based on a literature review and stakeholder input, this paper focused on three main areas: (1) status quo of how the social element of sustainable remediation is assessed among various countries and organizations; (2) methodologies to quantitatively and qualitatively evaluate societal impacts; and (3) findings from this research, including challenges, obstacles, and a path forward. In conclusion, several existing social impact assessment techniques are readily available for use by the remediation community, including rating and scoring system evaluations, enhanced cost benefit analysis, surveys/interviews, social network analysis, and multicriteria decision analysis. In addition, a list of 10 main social indicator categories were developed: health and safety, economic stimulation, stakeholder collaboration, benefits community at large, alleviate undesirable community impacts, equality issues, value of ecosystem services and natural resources, risk‐based land management and remedial solutions, regional and global societal impacts, and contributions to other policies. Evaluation of the social element of remedial activities is not without challenges and knowledge gaps. Identification of obstacles and gaps during the project planning process is essential to defining sustainability objectives and choosing the appropriate tool and methodology to conduct an assessment. Challenges identified include meaningful stakeholder engagement, risk perception of stakeholders, and trade‐offs among the various triple bottom line dimensions. ©2015 Wiley Periodicals, Inc.     

Integrated solid waste management based on the 3R approach

Integrated solid waste management (ISWM) based on the 3R approach (reduce, reuse, and recycle) is aimed at optimizing the management of solid waste from all the waste-generating sectors (municipal, construction and demolition, industrial, urban agriculture, and healthcare facilities) and involving all the stakeholders (waste generators, service providers, regulators, government, and community/neighborhoods). This article discusses the concept of solid waste management (SWM). Initially, SWM was aimed at reducing the risks to public health, and later the environmental aspect also became an important focus of SWM. Recently, another dimension is becoming a critical factor for SWM, i.e., resource conservation and resource recovery. Hence, the 3R approach is becoming a guiding factor for SWM. On the one hand, 3R helps to minimize the amount of waste from generation to disposal, thus managing the waste more effectively and minimizing the public health and environmental risks associated with it. On the other hand, resource recovery is maximized at all stages of SWM. Lately, the new concept of ISWM has been introduced to streamline all the stages of waste management, i.e., source separation, collection and transportation, transfer stations and material recovery, treatment and resource recovery, and final disposal. It was originally targeted at municipal solid waste management (MSWM), but now the United Nations Environment Programme (UNEP) is promoting this concept to cover all waste generating sectors to optimize the level of material and resource recovery for recycling as well as to improve the efficiency of waste management services. The ISWM concept is being transformed into ISWM systems to replace conventional SWM systems. This article further discusses the implementation process for ISWM. The process includes a baseline study on the characterization and quantification of waste for all waste generating sectors within a city, assessment of current waste management systems and practices, target setting for ISWM, identification of issues of concern and suggestions from stakeholders, development of a draft ISWM plan, preparation of an implementation strategy, and establishment of a monitoring and feedback system. UNEP is assisting member countries and their cities to develop an ISWM plan covering all the waste generating sectors within a specific geographical or administrative area such as a city or municipality. This umbrella approach is useful to generate sufficient volumes of recycling materials required to make recycling industries feasible. This is also helpful for efficient reallocation of resources for SWM such as collection vehicles, transfer stations, treatment plants, and disposal sites. UNEP is assisting cities to develop and implement ISWM based on the 3R approach. These experiences could be useful for other countries to develop and implement ISWM to achieve improved public health, better environmental protection, and resource conservation and resource recovery.     

我国报废汽车回收拆解企业发展的关键问题研究

报废汽车回收拆解具有巨大的经济、环境和社会效益。我国报废汽车回收拆解企业正面临极佳的发展环境,但目前存在着诸多问题,需要进行转型升级。提出报废汽车回收拆解企业转型升级过程中存在的若干关键问题,即回收阶段中的报废汽车量预测、回收模式选择、报废汽车回收网络构建;拆解阶段中的拆解工艺选择、拆解设备选择;产品销售阶段中的产品分类及市场分析、销售模式确定及销售网络构建、产品定价等问题,并对这些问题进行分析,提供解决方法和措施。     

含砷废料资源化利用与无害化处置现状

砷及其砷化物有剧毒,若处置不当,通过土壤、大气和水介质等各种途径进入环境,严重影响人类的生存环境。因此对含砷废料资源化利用和无害化处理一直是环保工作重要研究课题。针对含砷废料来源、稳定性评价方法和资源化综合利用技术进行分析,在此基础上提出含砷废料资源化利用和无害化处置建议。要从根本上建立健全相应的法律法规、标准体系,建立管理网络,培育市场运行体系,强化技术支撑体系,大力推广减量化、资源化、无害化的高新实用技术。     

Agrochemical characterisation of the solid by-products and residues from the winery and distillery industry

The winery and distillery industry produces a great quantity of residues, whose management and disposal are environmental problems due to their seasonal character and some polluting characteristics. The main solid by-products and residues generated are grape stalk, grape pomace or marc, wine lee, exhausted grape marc and winery sludge. In this study, 87 samples of winery and distillery residues were collected from different Spanish wineries and distilleries. Electrical conductivity, pH, total organic matter, organic carbon, polyphenols and contents of plant nutrients and heavy metals were determined. The purpose of this research was to study the composition of these wastes and to find relationships in order to use easily analysable parameters to estimate their composition. In general, the winery and distillery residues showed low pH (mean values ranged from 3.8 to 6.8) and electrical conductivity values (1.62-6.15 dS m(-1)) and high organic matter (669-920 g kg(-1)) and macronutrient contents, especially in K (11.9-72.8 g kg(-1)). However, a notable polyphenol concentration (1.2-19.0 g kg(-1)) and low micronutrient and heavy metal contents were also observed, some of these properties being incompatible with agricultural requirements. Therefore, conditioning treatments are necessary prior to possible use of these wastes. In all wastes, significant correlations were found between easily determined parameters, such as pH, electrical conductivity and total organic matter, and most of the parameters studied. The regression models obtained are also discussed.     

Functional Properties of Extruded Starch Acetate Blends

Starch acetate, with degree of substitution of 2, was blended with 0, 7.5 and 15% polylactic acid (PLA), Eastar Bio Copolyester 14766 (EBC) or Mater-Bi ZF03U (MBI) and 10%, 13%, or 16% (d.b.) ethanol and twin-screw extruded at 160°C barrel temperature. Physical characteristics of the extrudates, such as radial expansion ratio, unit and bulk densities, and of the mechanical properties, including unit spring index and bulk spring index, were measured. Type of polymer, polymer content, and ethanol content significantly affected the physical characteristics and mechanical properties. The sample extruded with 7.5% PLA and 13% ethanol had the highest expansion ratio and bulk spring index. The sample with 15% MBI and 16% ethanol had the lowest unit density, while the sample with 7.5% PLA and 16% ethanol had lowest bulk denisty. The highest unit spring index was expressed in the sample containing 7.5% PLA and 10% ethanol.     

An Ecological Multidisciplinary Approach to Protecting Society,Human Health,and the Environment at Nuclear Facilities

As the United States and other countries move toward a greater reliance on nuclear energy, it becomes increasingly important to characterize the environment around such facilities to protect society, human health, and the environment. This article presents an ecological, multidisciplinary approach to gathering the information needed to establish baselines, site new nuclear facilities, protect existing nuclear facilities and nuclear wastes, improve the basis for emergency planning, devise suitable monitoring schemes to ensure continued protection, provide data to track local and regional response changes, and provide for mitigation, remediation, and decommissioning planning. We suggest that there are five categories of information or data needs: (1) geophysical, sources, fate and transport; (2) biological systems; (3) human health; (4) stakeholder and environmental justice; and (5) societal, economic, and political. All of these categories are influenced by temporal and spatial patterns, vulnerabilities, and global changes. These informational needs are more expansive than the traditional site characterization but encompass a suite of physical, biological, and societal needs to protect all aspects of human health and the environment, not just physical health. We suggest that technical teams be established for each of the major informational categories, with appropriate representation among teams and with a broad involvement of a range of governmental personnel, natural and social scientists, Native Americans, environmental justice communities, and other stakeholders. Although designed for nuclear facilities, the templates and information teams can be adapted for other hazardous facilities. © 2013 Wiley Periodicals, Inc.     

Comparative management of offshore posidonia residues: composting vs. energy recovery

Residues of the marine plant posidonia (Posidonia oceanica, PO) beached in tourist zones represent a great environmental, economical, social and hygienic problem in the Mediterranean Basin, in general, and in the Apulia Region in particular, because of the great disturb to the bathers and population, and the high costs that the administrations have to bear for their removal and disposal.In the present paper, Authors determined the heating values of leaves and fibres of PO, the main offshore residues found on beaches, and, meantime, composted those residues with mowing and olive pruning wood. The final composts were characterized for pH, electrical conductivity, elemental composition, dynamic respiration index, phytotoxicity, fluorescence and infrared spectroscopic fingerprints.The aim of the paper was to investigate the composting and energy recovery of PO leaves and fibres in order to suggest alternative solutions to the landfill when offshore residues have to be removed from recreational beaches.The fibrous portion of PO residues showed heating values close to those of other biofuels, thus suggesting a possible utilization as source of energy.At the same time, compost obtained from both PO wastes showed high quality features on condition that the electrical conductivity and Na content are lowered by a correct management of wetting during the composting.     

Capillary electrophoretic study of dibasic acids of different structures: Relation to separation of oxidative intermediates in remediation

Dicarboxylic acids are important in environmental chemistry because they are intermediates in oxidative processes involved in natural remediation and waste management processes such as oxidative detoxification and advanced oxidation. Capillary electrophoresis (CE), a promising technique for separating and analyzing these intermediates, has been used to examine a series of dibasic acids of different structures and conformations. This series includes malonic acid, succinic acid, glutaric acid, adipic acid, pimelic acid, maleic acid, fumaric acid, phthalic acid, and trans, trans-muconic acid. The CE parameters as well as structural variations (molecular structure and molecular isomers, buffer composition, pH, applied voltage, injection mode, current, temperature, and detection wavelength) that affect the separations and analytical results have been examined in this study. Those factors that affect the separation have been delineated. Among these parameters, the pH has been found to be the most important, which affects the double-layer of the capillary wall, the electro-osmotic flow and analyte mobility. The optimum pH for separating these dibasic acids, as well as the other parameters are discussed in detail and related to the development of methods for analyzing oxidation intermediates in oxidative waste management procedures.     

Risk communication as a key component of a successful remediation project

Decisions made during the course of investigating and remediating a contaminated site, as well as the technology used, are most often driven exclusively by physical, technical, and health-based concerns. Additionally, in both determining and managing the potential risks posed by a remediation project, the focus tends to be placed primarily on health risks. However, a contaminated site and its remediation are neither static over time nor do they exist in a vacuum. Other elements of risk associated with the site and remedial activities include continuing regulatory oversight and compliance, public and agency relations, remedial technology costs, current and future land-use issues, and future technological/regulatory risks. Agencies, consultants, contractors, and facility management must consider these other non-health-related elements of risk. Additionally, efforts made to communicate a project's decisions, technologies, and risks are often made in a defensive or reactive posture, resulting in ineffective communication and an alienated, angry, or distrustful public. Proactive risk communication, as well as public involvement in the remedial process, are critical to the success of any remedial activity.     

Ambient levels of PFOS and PFOA in multiple environmental media

Making remediation and risk management decisions for widely‐distributed chemicals is a challenging aspect of contaminated site management. The objective of this study is to present an initial evaluation of the ubiquitous, ambient environmental distribution of poly‐ and perfluoroalkyl substances (PFAS) within the context of environmental decision‐making at contaminated sites. PFAS are anthropogenic contaminants of emerging concern with a wide variety of consumer and industrial sources and uses that result in multiple exposure routes for humans. The combination of widespread prevalence and low screening levels introduces considerable uncertainty and potential costs in the environmental management of PFAS. PFAS are not naturally‐occurring, but are frequently detected in environmental media independent of site‐specific (i.e., point source) contamination. Information was collected on background and ambient levels of two predominant PFAS, perfluorooctane sulfonate and perfluorooctanoate, in North America in both abiotic media (soil, sediment, surface water, and public drinking water supplies) and selected biotic media (human tissues, fish, and shellfish). The background or ambient information was compiled from multiple published sources, organized by medium and concentration ranges, and evaluated for geographical trends and, when available, also compared to health‐based screening levels. Data coverage and quality varied from wide‐ranging and well‐documented for soil, surface water, and serum data to more localized and less well‐documented for sediment and fish and shellfish tissues and some uncertainties in the data were noted. Widespread ambient soil and sediment concentrations were noted but were well below human health‐protective thresholds for direct contact exposures. Surface water, drinking water supply waters (representing a combination of groundwater and surface water), fish and shellfish tissue, and human serum levels ranged from less than to greater than available health‐based threshold values. This evaluation highlights the need for incorporating literature‐based or site‐specific background into PFAS site evaluation and decision‐making, so that source identification, risk management, and remediation goals are properly focused and to also inform general policy development for PFAS management.