County‐Scale Rainwater Harvesting Feasibility in the United States: Climate,Collection Area,Density, and Reuse Considerations

Roof rainwater harvesting (RWH) has the potential to augment water supplies for urban and suburban uses throughout the United States (U.S.). Studies of the performance of RWH at the building and city scales in the U.S. are available, but a countrywide overview of the potential performance of RWH at the county scale has not been done before. Three approaches were taken: (1) assess the viability of RWH in terms of the rainfall that could be captured in relation to the water demand in each county (excluding agriculture), (2) evaluate the performance of a “typical” domestic RWH system across all counties with metrics related to its ability to supply the potable and nonpotable demand, and (3) evaluate the effect of adding a 50% rainwater reuse component to the analysis. We find RWH could be a viable supplemental water source in the U.S., particularly in counties of the Pacific Northwest, Central, and Eastern regions (percent demand covered >50%). Low population density counties have the potential to meet their annual water needs with RWH, while high‐density counties could only source a small portion (~20%) of their annual demand with RWH. Typical RWH systems in counties in the Central and Eastern U.S. performed better than in Western counties. Adding a reuse component can be a key factor in making RWH attractive in many areas of the country. This work can inform future water infrastructure investment and planning in the U.S.     

A City Wide Assessment of the Financial Benefits of Rainwater Harvesting in Mexico City

We assess the potential financial benefits of rooftop rainwater harvesting (RWH) in Mexico City from the perspective of property owners and entrepreneurs. A bottom‐up approach was followed by evaluating RWH at individual buildings and aggregating the results to a borough/city level. We consider sector‐specific water demands, potable and nonpotable uses, and user‐specific water tariffs. We find that RWH is economically most beneficial for nondomestic users rather than for small domestic users, who are often the target of RWH interventions. Based on a net present value analysis, a potable RWH system is not favored for most domestic users under the current subsidized municipal water tariff structure. Our analysis only considers capital and maintenance expenses, and not other benefits related to increased access to water and reliability, or social benefits from a switch to a RWH system. If the initial capital expense for RWH is partly financed by transferring the water subsidy to an entrepreneur, then RWH becomes financially attractive for a wide range of domestic users. To improve water access in Mexico City, RWH is attractive in the most marginalized boroughs where water use is currently lower and precipitation is higher. For domestic users relying on trucked water, RWH can have great financial benefits. Our approach provides quantitative data with high spatial specificity, highlighting the places and types of users that would benefit most from RWH.     

Rainwater harvesting planning using geospatial techniques and multicriteria decision analysis

Growing water scarcity and global climate change call for more efficient alternatives of water conservation; rainwater harvesting (RWH) is the most promising alternative among others. However, the assessment of RWH potential and the selection of suitable sites for RWH structures are very challenging for the water managers, especially on larger scales. This study addresses this challenge by presenting a fairly robust methodology for evaluating RWH potential and identifying sites/zones for different RWH structures using geospatial and multicriteria decision analysis (MCDA) techniques. The proposed methodology is demonstrated using a case study. The remote sensing data and conventional field data were used to prepare desired thematic layers using ArcGIS© software. Distributed Curve Number method was used to calculate event-based runoffs, based on which annual runoff potential and runoff coefficient maps were generated in the GIS (geographic information system) environment. Thematic layers such as slope, drainage density, and runoff coefficient and their features were assigned suitable weights and then they were integrated in a GIS to generate a RWH potential map of the study area. Zones suitable for different RWH structures were also identified, together with suitable sites for constructing recharge structures (check dams and percolation tanks along the streams). It was found that the study area can be classified into three RWH potential zones: (a) ‘good’ (241 km²), (b) ‘moderate’ (476 km²), and (c) ‘poor’ (287 km²). About 3% of the study area (30 km²) is suitable for constructing farm ponds, while percolation tanks (on the ground) can be constructed in about 2.7% of the area (27 km²). Of the 83 sites identified for the recharge structures, 32 recharge sites are specially suited to the inhabitants because of their proximity. It is concluded that the integrated geospatial and MCDA techniques offer a useful and powerful tool for the planning of rainwater harvesting at a basin or sub-basin scale.     

Cost-efficiency of rainwater harvesting strategies in dense Mediterranean neighbourhoods

Rainwater harvesting (RWH) presents many benefits for urban sustainability and it is emerging as a key strategy in order to cope with water scarcity in cities. However, there is still a lack of knowledge regarding the most adequate scale in financial terms for RWH infrastructures particularly in dense areas. The aim of this research is to answer this question by analysing the cost-efficiency of several RWH strategies in urban environments. The research is based on a case study consisting of a neighbourhood of dense social housing (600 inhabitants/ha) with multi-storey buildings. The neighbourhood is located in the city of Granollers (Spain), which has a Mediterranean climate (average rainfall 650 mm/year). Four strategies are defined according to the spatial scale of implementation and the moment of RWH infrastructure construction (building/neighbourhood scale and retrofit action vs. new construction). Two scenarios of water prices have been considered (current water prices and future increased water prices under the EU Water Framework Directive). In order to evaluate the cost-efficiency of these strategies, the necessary rainwater conveyance, storage and distribution systems have been designed and assessed in economic terms through the Net Present Value within a Life Cycle Costing approach. The pipe water price that makes RWH cost-efficient for each strategy has been obtained, ranging from 1.86 to 6.42€/m³. The results indicate that RWH strategies in dense urban areas under Mediterranean conditions appear to be economically advantageous only if carried out at the appropriate scale in order to enable economies of scale, and considering the expected evolution of water prices. However, not all strategies are considered cost-efficient. Thus, it is necessary to choose the appropriate scale for rainwater infrastructures in order to make them economically feasible.     

Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia

Rainwater tanks for larger roof areas need optimisation of tank size, which is often not carried out before installation of these tanks. This paper presents a case study of rainwater tank evaluation and design for large roof areas, located in Melbourne, Australia, based on observed daily rainfall data representing three different climatic regimes (i.e. dry average, and wet years). With the aim of developing a comprehensive Decision Support Tool for the performance analysis and design of rainwater tanks, a simple spreadsheet based daily water balance model is developed using daily rainfall data, contributing roof area, rainfall loss factor, available storage volume, tank overflow and irrigation water demand. In this case study, two (185 m³ and 110 m³) underground rainwater tanks are considered. Using the developed model, effectiveness of each tank under different climatic scenarios are assessed. The analysis shows that both the tanks are quite effective in wet and average years, however less effective in dry years. A payback period analysis of the tanks is preformed which reveals that the total construction cost of the tanks can be recovered within 15-21 years time depending on tank size, climatic conditions and future water price increase rates. For the tanks, a relationship between water price increase rates and payback periods is developed. The study highlights the need for detailed optimisation and financial analysis for large rainwater tanks to maximise the benefits.     

Water Supply and Stormwater Management Benefits of Residential Rainwater Harvesting in U.S. Cities

This article presents an analysis of the projected performance of urban residential rainwater harvesting systems in the United States (U.S.). The objectives are to quantify for 23 cities in seven climatic regions (1) water supply provided from rainwater harvested at a residential parcel and (2) stormwater runoff reduction from a residential drainage catchment. Water‐saving efficiency is determined using a water‐balance approach applied at a daily time step for a range of rainwater cistern sizes. The results show that performance is a function of cistern size and climatic pattern. A single rain barrel (190 l [50 gal]) installed at a residential parcel is able to provide approximately 50% water‐saving efficiency for the nonpotable indoor water demand scenario in cities of the East Coast, Southeast, Midwest, and Pacific Northwest, but <30% water‐saving efficiency in cities of the Mountain West, Southwest, and most of California. Stormwater management benefits are quantified using the U.S. Environmental Protection Agency Storm Water Management Model. The results indicate that rainwater harvesting can reduce stormwater runoff volume up to 20% in semiarid regions, and less in regions receiving greater rainfall amounts for a long‐term simulation. Overall, the results suggest that U.S. cities and individual residents can benefit from implementing rainwater harvesting as a stormwater control measure and as an alternative source of water.     

Rainfall conditions and rainwater harvesting potential in the urban area of Khartoum

Runoff water management is among the inherent challenges which face the sustainability of the development of arid urban centers. These areas are particularly at risk from flooding due to rainfall concentration in few heavy showers. On the other hand, they are susceptible to drought. The capital of Sudan (Khartoum) stands as exemplary for these issues. Hence, this research study aims at investigating the potential of applying rainwater harvesting (RWH) in Khartoum City Center as a potential urban runoff management tool. Rapid urbanization coupled with the extension of impervious surfaces has intensified the heat island in Khartoum. Consequently, increased frequency of heat waves and dust storms during the dry summer and streets flooding during the rainy season have led to environmental, economical, and health problems. The study starts with exposing the rainfall behavior in Khartoum by investigating rainfall variability, number of raindays, distribution of rain over the season, probability of daily rainfall, maximum daily rainfall and deficit/surplus of rain through time. The daily rainfall data show that very strong falls of >30 mm occur almost once every wet season. Decreased intra- and inter-annual rainfall surpluses as well as increased rainfall concentration in the month of August have been taking place. The 30-year rainfall variability is calculated at decade interval since 1941. Increasing variability is revealed with 1981–2010 having coefficients of variation of 66.6% for the annual values and 108.8–118.0% for the wettest months (July–September). Under the aforementioned rainfall conditions, this paper then explores the potential of RWH in Khartoum City Center as an option for storm water management since the drainage system covers only 40% of the study area. The potential runoff from the 6.5 km² center area is computed using the United States Natural Resources Conservation Services method (US-NRCS), where a weighted Curve Number (CN) of 94% is found, confirming dominant imperviousness. Rainfall threshold for runoff generation is found to be 3.3 mm. A 24,000 m³ runoff generated from a 13.1 mm rainfall (with 80% probability and one year return period) equals the drainage system capacity. An extreme rainfall of 30 mm produces a runoff equivalent to fourfold the drainage capacity. It is suggested that the former and latter volumes mentioned above could be harvested by applying the rational method from 18% and 80% rooftops of the commercial and business district area, respectively. Based on the above results, six potential sites can be chosen for RWH with a total roof catchment area of 39,558 m² and potential rooftop RWH per unit area of 0.033 m³. These results reflect the RWH potential for effective urban runoff management and better water resources utilization. RWH would provide an alternative source of water to tackle the drought phenomenon.     

Assessment of residential rainwater harvesting efficiency for meeting non-potable water demands in three climate conditions

Global demand for clean water supplies is on the rise due to population growth. This is also true in most cities of Iran. Non-conventional water resources must be developed to partially offset the increasing demand. In this study, the applicability and performance of rainwater harvesting (RWH) systems to supply daily non-potable water were assessed. Storage of rain falling on the roofs of residential buildings and directed into installed tanks was simulated in three cities of varying climatic conditions, namely Tabriz (Mediterranean climate), Rasht (humid climate), and Kerman (arid climate). Daily rainfall statistics for a period of 53 years as well as the information on the contributing roof area, available tank volumes and non-potable water demand were collected in each city. Typical residential buildings with roof areas of 60, 120, 180 and 240 m² with an average of four residents in each house were considered for the study. According to the results in humid climate, it is possible to supply at least 75% of non-potable water demand by storing rainwater from larger roof areas for a maximum duration of 70% of the times. For roofs with small surface area, the supply meets 75% of non-potable water demand for a maximum duration of 45% of the times. Moreover, for Mediterranean climate, it is possible to supply at least 75% of non-potable water demand in buildings with larger roof areas for a maximum duration of 40% of the times. It is also found that in arid climate, similar duration is only 23% of the times.     

Characterizing Rainwater Harvesting Performance and Demonstrating Stormwater Management Benefits in the Humid Southeast USA

Rainwater harvesting (RWH) has traditionally been implemented in areas with (semi) arid climates or limited access to potable water supplies; however, recent droughts in the humid southeastern United States have led to increased implementation of RWH systems. The objectives of this study were twofold: (1) present usage characteristics and performance results for four RWH systems installed in humid North Carolina (NC) as compared with systems located in arid/semiarid regions and (2) identify system benefits and modifications that could help improve the performance of RWH systems installed in humid regions of the world. For this study four RWH systems were installed in NC. Their usage was monitored for at least one year and compared with similar studies. Results revealed that dedicated water uses and usage characteristics for RWH systems in NC differed from those previously reported in the literature. Two of the systems studied met 100 and 61% of the potable water demand with designated uses of animal kennel flushing and greenhouse irrigation, respectively. The designated uses yielding the greatest potable water replacement were often seasonal or periodic, thus necessitating the need for identifying and implementing secondary objectives for these systems, namely, stormwater management. Otherwise, the expense and effort required to implement RWH systems in humid areas will most likely preclude their use.     

Experience with Rainwater Catchment Systems in Kenya and Botswana

Rainwater catchment is a valuable but frequently neglected alternative a domestic water supply in the developing world. In the arid and semi-arid areas of Kenya and Botswana a number of water supply programmes which depend wholly or in part on rainwater catchment are currently being implemented. This paper discusses this experience and describes the various construction techniques being used. It has been found that rainwater catchments has a number of very unique advantages and relatively few disadvantages. It is argued that more consideration should be given to the inclusion of rainwater catchment systems, especially in rural water supply programmes.     

The role of personal experience in frequency of rainwater tank maintenance and policy implications

Domestic rainwater tanks have a long history in Australia, although more recently they have been common only in remote and rural areas. However, in some urban areas, recent drought conditions have led to the promotion of rainwater tanks to supplement domestic water supplies. Evidence suggests that water tank maintenance may be insufficient in many cases, leading to problems with water quality and the potential spread of vector-borne disease. Drawing on research into the impact of personal experience (i.e. procedural knowledge) relating to pro-environmental behaviour, a survey of urban residents with mandated rainwater tanks (N?=?746) was conducted. The study assessed whether past personal history of living with a tank influenced the frequency of tank maintenance behaviours. Analyses indicated that both childhood and prior adult experience with rainwater tanks were important in predicting adequate tank maintenance behaviour, particularly among males. The results also showed that attitudinal perceptions of water culture did not influence maintenance behaviour, whereas direct past experiences did, suggesting an important role for procedural knowledge. These results are discussed with reference to the promotion of tank maintenance and other pro-environmental behaviours through the development of future environmental policies designed to foster the development of pro-environmental skills to empower citizens.     

Simulation based programming for optimization of large-scale rainwater harvesting system: Malaysia case study

Large scale rainwater harvesting (LSRWH) is a promising alternative to address security and flood issues in urban areas. The development and planning of a LSRWH for an eco-community involves comprehensive site-planning, systems planning and design, which includes the rainwater source collection (roof) to the storage tank, the distribution and allocation system. This paper describes a new technique for designing a LSRWH for a community of 200 houses with an average of 4 persons per house and an average total daily water demand of 160 m³. It was found that the optimal size storage tank for a 20,000 m² roof area is 160 m³ with a 60% reliability. The application of this model to the case study revealed a significant water saving up to 58% .The total cost for this system is 443,861 USD over a life-span of 25 years.     

Sustainable Rainwater Catchment Systems for Micronesian Atoll Communities

Atoll island communities rely on rainwater catchment systems (RWCS) as a primary method of storing freshwater. However, stored freshwater can be depleted during times of drought, requiring importation of water to sustain community living. To maintain adequate water supply under future climatic conditions, the functioning of RWCS for atoll communities must be analyzed and optimal designs must be adopted. In this study, a quantitative analysis of stored daily water volumes is provided for atoll islands within the Federated States of Micronesia (FSM), with Nikahlap Island, Pakein Atoll, and a generic island in western FSM used as representative cases. Using a daily water balance model for the RWCS, baseline conditions are simulated for the 1997‐1999 time period, during which an intense El Niño‐induced drought occurred, and a sensitivity analysis is performed to quantify the influence of RWCS features on water system outputs, whereupon an optimal RWCS design using existing infrastructure is analyzed. Results indicate the strong influence of catchment area, system efficiency, and storage capacity on water volumes and the depletion of water during dry seasons and drought periods using current RWCS infrastructure. Adequate storage can be maintained during a major drought if unused RWCS features are employed and if minimal rationing is adopted. Study results provide water resource managers and government officials with valuable data for consideration in water security measures.     

Participatory Model Calibration for Improving Resource Management Systems: Case Study of Rainwater Harvesting in an Indian Village

While planning resource management systems in rural areas, it is important to consider criteria that are specific to the local social conditions. Such criteria might change from one region to another and are hence best identified using a participatory approach. In this work, we propose a participatory framework to identify such criteria and derive their weights. These identified criteria and their weights are used as parameters to develop a quantitative model for evaluating efficiency of each system. Such a model can serve as a support tool for stakeholders to simulate and analyze “what‐if” scenarios, evaluate alternatives, and select one which best satisfies their requirements. We use existing systems to test the model by comparing efficiencies evaluated by the model to efficiencies perceived by the stakeholders. The model is calibrated by repeating the process until statistically significant correlation is achieved between evaluated and perceived efficiencies. The novelty of the proposed framework lies in treating efficiencies perceived by the stakeholders as the ground truth since they know these systems well and are their ultimate users. The framework is successfully demonstrated using case study of rainwater harvesting (RWH) systems in an Indian village. The resulting calibrated model can be used to plan new RWH systems in this region and similar regions elsewhere. The framework can be used to plan other resource management systems in various regions.     

Turbidity and nitrate transfer in karstic aquifers in rural areas: the Brionne Basin case-study

The degradation of water quality in many groundwaters of Europe is a major source of concern. Rises in turbidity and nitrate concentrations represent present or potential threats for the quality of drinking water in rural areas. They are for the most part a consequence of agricultural intensification which has considerably affected land cover and land use in recent decades. In our case-study (a karstic catchment) the mechanisms which explain changes in water quality, as far as turbidity and nitrate are concerned, result from a strong continuity between surface and underground waters. The karstic system of the Brionne Basin can be considered as both the focus of rapid horizontal flows (runoff, a rapid process in which rainwater reaches the spring directly through sinkholes) and slow vertical flows (leaching, in which rainwater filters through the soil to the spring). A hierarchical approach to the water pollution problem of the basin suggests that turbidity or nitrate concentrations peak during heavy rain episodes and are short-term events. In terms of management, this implies that the solution to water pollution caused by such events is also short-term and can therefore be addressed at a local scale. The rise of nitrate concentrations during the past twenty years is the main concern. The solution can only be found at a global scale (all the catchment area must be taken in account: land plots and their spatial configuration), and by taking a long-term approach.     

Applying exergy analysis to rainwater harvesting systems to assess resource efficiency

In our continued effort in reducing resource consumption, greener technologies such as rainwater harvesting could be very useful in diminishing our dependence on desalinated or treated water and the associated energy requirements. This paper applies exergy analysis and exergetic efficiency to evaluate the performance of eight different scenarios of urban rainwater harvesting systems in the Mediterranean-climate Metropolitan Area of Barcelona where water is a scarce resource. A life cycle approach is taken, where the production, use, and end-of-life stages of these rainwater harvesting systems are quantified in terms of energy and material requirements in order to produce 1 m³ of rainwater per year for laundry purposes. The results show that the highest exergy input is associated with the energy uses, namely the transport of the materials to construct the rainwater harvesting systems. The scenario with the highest exergetic efficiency considers a 24 household building with a 21 m³ rainwater storage tank installed below roof. Exergy requirements could be minimized by material substitution, minimizing weight or distance traveled.     

Nutrient removal in a pilot and full scale constructed wetland, Putrajaya city, Malaysia

Putrajaya Wetlands in Malaysia, a 200ha constructed wetland system consisting of 24 cells, was created in 1997-1998 to treat surface runoff caused by development and agricultural activities from an upstream catchment before entering Putrajaya Lake (400ha). It was designed for stormwater treatment, flood control and amenity use. The water quality improvement performance of a section of the wetland cells is described. The nutrient removal performance was 82.11% for total nitrogen, 70.73% for nitrate-nitrogen and 84.32% for phosphate, respectively, along six wetland cells from Upper North UN6 to UN1 from April to December 2004. Nutrient removal in pilot scale tank systems, simulating a constructed wetland and planted with examples of common species at Putrajaya, the Common Reed Phragmites karka and Tube Sedge Lepironia articulata, and the capacity of these species to retain nutrients in above and below-ground plant biomass and substrate is reported. The uptake of nutrients by the Common Reed and Tube Sedge from the pilot tank system was 42.1% TKN; 28.9% P and 17.4% TKN; 26.1% P, respectively. The nutrient uptake efficiency of the Common Reed was higher in above-ground than in below-ground tissue. The results have implications for plant species selection in the design of constructed wetlands in Malaysia and for optimizing the performance of these systems.     

CASA DEL AGUA: WATER CONSERVATION DEMONSTRATION HOUSE 1986 THROUGH 19981

ABSTRACT: Casa del Agua (Casa) in suburban Tucson, Arizona, was designed as a residential water conservation facility for applied research, demonstration of operational results, and transfer of technology to the general public. Starting in 1983, an existing residence was located, modified and retrofitted to acquire operational data on residential water use. Modifications included retrofitting existing landscapes and enlarging the rooftop to collect and harvest rainwater; separating blackwater and graywater lines; installing meters, low‐water‐use appliances and fixtures, and underground storage tanks for rainwater and graywater; and creating a public information center. Over the 13‐plus years of actual operation, both the interior and exterior water use research results indicate large reductions in water use can be effected using water‐saving devices andlor harvesting and reusing rainwater and graywater. Casa achieved over a 24 percent reduction in total water use and a 47 percent reduction in municipal water used compared to the typical Tucson residence. Overall water used was comprised of harvested rainwater (10 percent), recycled graywater (20 percent), and municipal water (70 percent). Casa's Information Center was visited by approximately 13,000 people from September 1985 through April 1999 and the research has been featured in local, national, and international media.     

炼油企业初期雨水收集和处理

炼油企业初期雨水流经装置设备和场地路面时受到污染,未经处理排放后,将会对水体造成污染,由于设计和管理原因,实际操作中初期雨水并没有妥善处理。文章提出了相关的初期雨水量的计算方法、并提出了一种可靠的初期雨水收集处理系统,以实现初期雨水的规范处理。     

Potential for rainwater use in high-rise buildings in Australian cities

Rainwater is a traditional but underutilized water resource that has today had a resurgence due to the worldwide water crisis. This paper demonstrates the outcomes of research on the feasibility of rainwater use in high-rise residential envelopes for four Australian cities of Melbourne, Sydney, Perth and Darwin. Different climate patterns and various levels of water demand management were established for determination of storage dimensions; annual tank water use; reduction in both imported water flow and stormwater disposal; and water spillage from tanks. High level water demand management was a profoundly effective tool for reducing potable water supply, especially in combination with rainwater use. The economic feasibility of rainwater use systems were estimated; with Sydney having the shortest payback period compared to other cities either both with 3A rated appliances (8.6 years) or 5A ones installed (10.4 years). That was due to the higher and more consistent rainfall in Sydney. An outcome of this study was that Sydney was likely most suited to rainwater use, followed by Perth, Darwin, and then Melbourne. The objective of this study was to fill in the gap in estimating feasibility of rainwater use in various Australian cities. This investigation endeavors to provide assistance to water authorities and urban planners of Australian cities with the consideration of the potential of rainwater harvesting.