交联阳离子淀粉的合成及其对重金属离子的吸附

通过正交实验合成了取代度为0．568的交联阳离子淀粉。考察了溶液pH、螯合剂用量、重金属离子初始浓度对交联阳离子淀粉去除重金属离子效果的影响。当重金属离子初始质量浓度为50mg／L、螯合剂投加量为0．5g／U时,Pb^2 ,Cu^2 ,Cr^3 在溶液pH为6时的去除率达到最高,分别为97．94％,99．46％,84．30％,而Cd^ 在溶液pH为7时的去除率达到最高,为99．36％。实验结果表明,交联阳离子淀粉是一种有效去除废水中重金属的处理剂。     

Accumulation and fate of selected heavy metals in a biological wastewater treatment system

The aim of this research was to study the accumulation and removal of heavy metals (Cd, Cu, Pb, Zn) by a biological wastewater treatment system. Heavy metal contents in the influent and effluent wastewater were compared. Also, the heavy metal contents in the sludge before and after anaerobic digestion were compared. The results showed: (1) more pronounced variations in the contents of Cu and Zn than that of Cd and Pb, which showed that at 0.02 for Cd and 0.05 mg/l for Pb, the reduction in their contents was insignificant; (2) that removal of heavy metals was directly proportional to their initial contents in the influent wastewater. Corresponding to the influent contents, in increasing order, the reduction in heavy metal contents was: Cd相似文献   

含重金属的硫酸废水的治理

介绍了“石灰中和－精密微孔过滤”技术治理含重金属的硫酸废水的工艺流程和处理效果,着重介绍了高分子精密微孔过滤技术的特点,操作方法和运行数据。     

Heavy metal and nutrient changes during vermicomposting animal manure spiked with mushroom residues

A pilot-scale trial of four months was conducted to investigate the responses of heavy metal and nutrient to composting animal manure spiked with mushroom residues with and without earthworms. Results showed that earthworm activities accelerated organic matter mineralization (e.g. reduction in C/N ratio, increase in total concentrations of N, P, K) and humification (e.g. increase in humic acid concentration, humification ratio and humification index). Despite composting increased total heavy metal (i.e. As, Pb, Cu, Zn) concentrations irrespective of earthworm, the availability of heavy metals extracted by DTPA significantly (P < 0.05) decreased particularly in treatments with earthworms introduced. The shift from available to unavailable fractions of heavy metals was either due to earthworm bioaccumulation, as indicated by total heavy metal concentrations being higher in earthworm tissues, or due to the formation of stable metal-humus complexes as indicated by the promotion of humification. Our results suggest that vermicomposting process could magnify the nutrient quality but relieve the heavy metals risk of agricultural organic wastes.     

含重金属离子废水治理技术的研究进展

介绍了治理含重金属离子废水的物理法、物理化学法、普通化学法、生化法及电化学法等技术的研究进展；论述了电-生物耦合法处理该类废水的最新趋势；指出将不同治理技术加以耦合，充分发挥不同技术的优点、取长补短，并尽量避免它们之问的相互抑制作用，将是该类废水治理技术的发展方向。     

Heavy metal release from different ashes during serial batch tests using water and acid

Most ashes contain a significant amount of heavy metals and when released from disposed or used ash materials, they can form a major environmental concern for underground waters. The use of water extracts to assess the easily mobilisable content of heavy metals may not provide an appropriate measure. This study describes the patterns of heavy metal release from ash materials in context with results from the German standard extraction method DIN-S4 (DIN 38 414 S4). Samples of four different ashes (municipal solid waste incineration ash, wood ash, brown coal ash and hard coal ash) were subjected to a number of serial batch tests with liquid renewal, some of which involved the addition of acid to neutralize carbonates and oxides. Release of heavy metals showed different patterns depending on the element, the type of material, the method of extraction and the type of the extractant used. Only a small fraction of the total heavy metal contents occurred as water soluble salts; of special significance was the amount of Cr released from the wood ash. The reaction time (1, 24 or 72 h between each extraction step with water) had only a small effect on the release of heavy metals. However, the release of most of the heavy metals was governed by the dissolution processes following proton inputs, indicating that pH-dependent tests such as CEN TC 292 or others are required to estimate long-term effects of heavy metal releases from ashes. Based on the chemical characteristics of ash materials in terms of their form and solubility of heavy metals, recommendations were made on the disposal or use of the four ash materials.     

A Critical Review on Natural Fibers Modifications by Graft Copolymerization for Wastewater Treatment

Graft copolymerization is a distinctive approach to modify the inherently cheap natural fibers (NFs) using different initiators to incorporate synthetic polymer side chains allowing development of novel types of hybrid materials. This method has been widely applied to develop a variety of NFs based adsorbents for decontamination of toxic pollutants from the aqueous environment. However, the development of high-performance adsorbents from NFs is steady challenged by the need to preserve the sustainability during graft modifications and applications. This article critically reviews the progress on modifications of NFs by graft copolymerization of polar monomers on NFs using various initiating methods and their applications in wastewater treatment. Particularly, the applications of the grafted NFs in removal of heavy metal ions, synthetic dyes, oil spills and extraction of precious metals from wastewater are elaborated. The critical challenges to the viability and sustainability of NFs-based adsorbents with respect to functionalization by graft copolymerization and environmental impacts are discussed and the future research directions are also outlined.

     

微电解技术在工业废水处理中的应用进展

概述了近年来传统铁碳微电解法在难降解工业废水预处理、污泥处理和重金属去除、低浓度废水处理等领域的研究进展,介绍了通过在铁碳微电解体系中投加其他金属以催化反应的改性微电解法的废水处理效果,以及微电解与电场强化、微波强化、Fenton氧化、生物处理、物化法等其他工艺联合技术在废水处理中的应用现状,探讨了相关微电解技术存在的问题及未来的发展方向。     

Heavy metal content in rubbish bags used for separate collection of biowaste

The heavy metal content of several rubbish bags used to collect the organic fraction of municipal solid waste (OFMSW) is shown in this paper. Nowadays, several public awareness campaigns carried out by municipalities have promoted rubbish bags based mainly on their appearance, without concern for their heavy metal content. A high amount of heavy metals was detected in some polyethylene bags promoted in different campaigns for OFMSW source-sorted collection, while compostable bags presented low quantities of heavy metals. Some other rubbish bags, as well as commercial bags, were also analysed for comparison. These results should be taken into account before promoting the use of one or other type of bag. Moreover, the rubbish bag manufacturers should reduce the heavy metal content in order to avoid heavy metal scattering in the environment, and also to reduce the consumption of raw materials.     

Heavy metal speciation in various types of fly ash from municipal solid waste incinerator

Fly ash (FA) from municipal solid waste incinerators has been known as hazardous waste, which is mostly because of the high content of heavy metal and dioxins. Besides the content, the form of the heavy metals in fly ash is also very important, because it is tightly related with the leaching behavior of fly ash in diverse circumstances. To evaluate the environment potential risk of fly ash, the Tessier chemical extraction method was adopted. In this study, four kinds of fly ash were examined, one sample from China (CFA) and the other three from Japan (RFA, CaFA and NaFA). Five metal elements were detected and they were Ni, Cr, Cd, Pb, and Cu. The result of total heavy metals’ concentration showed CFA has the lowest content. As to the Tessier chemical extraction experiments, the results show that Cd, Pb, and Cu have higher leaching risk in the environment than other heavy metals. The result of leaching test experiment showed that the more exchangeable speciation of Cd, Cr and Pb in FA, the more it could leach out in natural environment.     

Heavy Metals Removal by Biosorption and Flotation

The removal of a mixture of heavy (toxic) metal cations (copper, nickeland zinc) from liquid effluents was investigated in this study at pilotscale, using counter-current contact mode. The innovative processinvolved the abstraction of metal ions onto fungal biosorbents, followedby the application of flotation for the subsequent solid/liquid separationof biomass particles. The ability of microorganisms to remove metal ionsfrom aqueous solutions is a well-known phenomenon. Nevertheless,engineering considerations are very important in decisions, concerningthe commercial future of biosorption and practical solutions are neededfor certain problems, such as the efficient post-separation ofmetal-loaded biomass. The two processes (flotation and biosorption) caneffectively operate in combination, in what it was termed biosorptiveflotation process. The sorbents may be recycled, after appropriate elutionof metals, as well as the treated (clean) water.     

Neutralization of an extremely acidic sludge and stabilization of heavy metals in flyash aggregates

An extremely acidic, heavy metal-rich sludge (pH=-1.2) was scrubbed with a Class-F fly ash in order to simultaneously neutralize the acidity and stabilize the heavy metals contained in both wastes. This paper outlines the leaching behavior of the aggregate material generated by scrubbing. For proper fly ash/sludge ratios, the fly ash acted as an outstanding neutralizer for the acidic waste. Leaching of heavy metals from the aggregate samples was below the environmental limits within a pH range between 3 and 9. Subsequent washing of the leached aggregate with acidic CALWET solutions did not result in an additional release of heavy metals. It is proposed that coordinative bonding of the metal cations onto neutral surface sites and electrostatic adsorption led to stabilization of the heavy metals within the aggregate structure below hydrolysis pHs.     

膜电解技术处理含氯及重金属的废酸

采用离子交换膜电解技术处理铜冶炼过程产生的含氯及重金属的废酸。考察了废酸处理工艺、电解温度、电解时间、电流密度和催化剂的添加等条件对处理效果的影响。实验结果表明：采用先沉淀重金属后脱氯的废酸处理工艺，氯离子和铜离子的去除效果均较好;当以钛盐为催化剂时，在电解温度为40 ℃、电解时间为2.0 h、电流密度为825 A/m²的最佳工艺条件下，处理后废酸中的氯离子质量浓度为0.22 g/L，氯离子去除率为98.59%，铜离子质量浓度为0.45 g/L，铜离子去除率为95.08%，其他重金属大部分也得到有效去除。净化后的废酸可回用至铜冶炼的生产过程中。     

Case study: Using soil washing/leaching for the removal of heavy metal at the twin cities army ammunition plant

COGNIS TERRAMET® soil leaching and Bescorp soil washing systems have been successfully combined to remediate an ammunition test burn area at the Twin Cities Army Ammunition Plant (TCAAP), New Brighton, Minnesota. This cleanup is the first in the country to successfully combine these two technologies, and it offers a permanent solution to heavy metal remediation. Over 20,000 tons of soil were treated in the project. The cleaned soil remained on-site, and the heavy metal contaminants were removed, recovered, and recycled. Eight heavy metals were removed from the contaminated soil achieving the very stringent cleanup criteria of <175 ppm for residual lead and achieving background concentrations for seven other project metals (antimony, cadmium, chromium, copper, mercury, nickel, and silver). Initial contaminant levels were measured as high as 86,000 ppm lead and 100,000 ppm copper, with average concentrations over 1,600 ppm each. In addition, both live and spent ordnance were removed in the soil treatment plant to meet the cleanup criteria. By combining soil washing and leaching, COGNIS and Bescorp were able to assemble a process which effectively treats all the soil fractions so that all soil material can be returned on-site, no wastewater is generated, and the heavy metals are recovered and recycled. No hazardous waste requiring landfill disposal was generated during the entire remedial operation.     

Heavy metal removal from contaminated sludge for land application: a review

In recent years, various methods for heavy metal removal from sewage sludge have been extensively studied in order to minimize the prospective health risks of sludge during land application. In this paper, a comparative review and critical analysis of the application of chemical extraction, bioleaching, electroreclamation, and supercritical fluid extraction (SFE), in removing heavy metals from contaminated sludges is presented. Moreover, speciation studies, which can indicate ease of leachability of the different forms of heavy metals in sludge, are also presented. Experimental studies revealed a broad range in metal extraction efficiencies of the different extraction technologies. Acid treatment seemed to effectively remove Cd, attaining as much as 100% removal for some studies, as compared to bioleaching. SFE also gave higher removal efficiency than bioleaching. Cr, Pb and Ni seemed to be also effectively removed by the acid treatment. For the removal of Cu, Mn and Zn, the bioleaching process seemed to be appropriate with maximum removal efficiencies of 91%, 93% and 96% for the three metals, respectively, and as high as 64% minimum removal efficiency for Zn. The SFE process also gave good results for Cu, Mn and Zn removal. Electroreclamation exhibited better removal efficiency for Mn, but is still inferior to acid treatment and bioleaching processes. For chemical extraction, because of the adverse impacts that can result from the use of inorganic acids and complexing agents, interest can be directed more toward utilizing organic acids as extracting agents because of their biodegradability and capability to remove metals at mildly acidic condition, hence requiring less acid. The bioleaching process, although it seems to give a higher yield of metal extraction with lower chemical cost than chemical extraction, may be limited by the inability of the system to cope with the natural environmental conditions, requires strict monitoring of aeration rate and temperature and has applicability to only low sludge solids concentration. A full-scale study would be useful to better assess the efficiency of the process. The electroreclamation technology is limited by its relatively higher energy consumption and limited applicability to sludge. The SFE method, on the other hand, is limited by the complexity of the process and the cost of ligands suitable for effective metal extraction. Both of these technologies are still in their early stage of application and hence there is a need for further basic and applied studies. Finally, the common advantage for almost all treatment technologies studied is that the extraction efficiencies for some metals are high enough to remove metals from sludge to levels suitable for land application.     

Heavy metal content of combustible municipal solid waste in Denmark.

Data on the heavy metal composition of outlets from Danish incinerators was used to estimate the concentration of Zn, Cu, Pb, Cr, Ni, Cd, As and Hg in combustible waste (wet as received) at 14 Danish incinerators, representing about 80% of the waste incinerated in Denmark. Zn (1020 mg kg(-1)), Cu (620 mg kg(-1)) and Pb (370 mg kg(-1)) showed the highest concentration, whereas Hg (0.6 mg kg(-1)) showed the lowest concentration. The variation among the incinerators was in most cases within a factor of two to three, except for Cr that in two cases showed unexplained high concentrations. The fact that the data represent many incinerators and, in several cases, observations from a period of 4 to 5 years provides a good statistical basis for evaluating the content of heavy metals in combustible Danish waste. Such data may be used for identifying incinerators receiving waste with high concentrations of heavy metals suggesting the introduction of source control, or, if repeated in time, the data must also be used for monitoring the impacts of national regulation controlling heavy metals. It is recommended that future investigations consider the use of sample digestion methods that ensure complete digestion in order to use the data for determining the total heavy metal content of waste.     

The use of volcanic soil as mineral landfill liner--III. Heavy metals retention capacity.

The volcanic soil of Southern Chile was tested for its heavy metal retention capacity. The maximum uptakes for CrO4(2-) (CrVI), Cu(2+), Zn(2+) and Pb(2+) were determined to be 2.74, 5.32, 5.86 and 7.44 mg g(-1), respectively. At a slightly alkaline pH value (7.5), it seems that a precipitation-adsorption process was responsible for the Cu(2+) and Zn(2+) uptake onto volcanic soil. All the determined values are of the same order of magnitude as natural zeolites heavy metals adsorption capacities. In addition, the heavy metals diffusion model through a 1 m volcanic soil mineral liner shows breakthrough times of 21.6, 10.2 and 8.9 years, for Pb(2+), Zn(2+) and Cu(2+), respectively, confirming the trend obtained in the adsorption isotherms. The natural volcanic soil of Southern Chile is an interesting material for possible use as landfill mineral basal sealing. It has an appropriate sealing potential (average Kf value of 5.85 x 10(-9) m s(-1)) and a heavy metals retention capacity comparable with natural zeolites. About two-thirds of the agricultural land in Chile (approximately 0.4 million km2) is derived from volcanic ash, suggesting an important soil volume for future landfill projects, that could be obtained in sufficient quantities from urban building activities.     

壳聚糖吸附重金属离子的研究进展

综述了,我国近几年来壳聚糖处理含重金属离子废水的研究进展。壳聚糖及其改性产品的吸附性能主要体现在对各种金属离子的吸附上,为了有选择性地吸附某种或某些金属离子,人们通过修饰、交联、接枝等方法对壳聚糖进行了各种改性研究。     

我国石煤提钒废水的处理现状与展望

石煤提钒废水中含有大量的重金属、氨氮和盐类。介绍了石煤提钒中重金属废水、氨氮废水、高盐废水的处理技术,总结了各种废水处理技术在石煤提钒废水治理中的应用现状,并对石煤提钒废水的治理进行了展望。化学法应用广泛,但易造成二次污染;物理法具有广阔的应用前景,但处理效率低;生物法具有效率高、选择性强、废水处理成本低等优点,是一种极具发展潜力的废水治理方法,应加大在石煤提钒废水治理方面的研究。     

Evaluation of chemical stability of heavy metals in industrial waste slag by infrared spectroscopy

Our aim was to clarify the chemical bonding type and stability of heavy metals in industrial waste slag (IWS) by using Fourier transform infrared (FT-IR) spectroscopy. The chemical composition of the IWS sample used in this study was an Al/Si ratio of 0.50 with Fe, Pb, and other minor heavy metals present. The IR peak position of the Si-OSi( M) band (M: Al, Pb, or Fe) was lower for IWS (971 cm⁻¹) than for synthetic Si-Al glass with an Al/Si ratio of 0.5 (1029 cm⁻¹). This implies the formation of covalent Si-O-Pb and Si-O-Fe bonds in the IWS, which caused a shift in the peak position toward a lower wavenumber. FT-IR spectra of synthetic Si-Al-Pb and Si-Al-Fe glasses with various Pb/Si and Fe/Si ratios with a constant Al/Si ratio of 0.5 showed that the peak position of the Si-O-Si(M) band continuously shifted toward lower wavenumbers with increasing Pb/Si and Fe/Si ratios. This suggests that covalent Si-O-Pb and Si-O-Fe bonds are formed in IWS. The comparison of peak positions of the Si-O-Si(M) band between IWS and Si-Al-Fe glass indicated that not only Pb but also other minor heavy metals such as Cu and Cr were included by covalent bonds into the structure of IWS. Therefore, we concluded that most of the heavy metals in IWS formed covalent Si-O-M bodings and were chemically stable.