Air Quality Management in Izmir Region of Turkey as Required by Clean Air Plans

As a first step to work out an abatement plan against air pollution, a local emission inventory with 1 hr temporal and 1 km spatial resolution in the city of Izmir and its surroundings was prepared. The study area consisted of a 200 × 170 km² rectangle having the city of Izmir at the centre. The studied pollutants were total particulate matter (PM), sulfur oxides (SO_x), nitrogen oxides (NO_x), volatile organic compounds (VOC) and carbon monoxide (CO). Emissions of these pollutants were determined by estimation methods making use of suitable emission factors. Emission sources were evaluated in three categories; point, area and line sources. For year 2000 total emissions in the study area on an average day were estimated as 173 tons PM, 299 tons SOx, 136 tons NOx, 68 tons VOC and 320 tons CO. At the second part of the study, calculated emissions were transformed into air quality predictions in the area by using the Industrial Source Complex – Short Term (ISCST3) dispersion model. Model results were tested with monitoring data from urban air quality stations obtained during the year 2000. Results of the past, present and future air quality estimates in the region were discussed. In order to do so, future scenarios including various control technology applications were formulated and tested to see their effect on the future air quality.     

Modelling Seasonal Dynamics from Temporal Variation in Agricultural Practices in the UK Ammonia Emission Inventory

Most ammonia (NH₃) emission inventories have been calculated on an annual basis and do not take into account the seasonal variability of emissions that occur as a consequence of climate and agricultural practices that change throughout the year. When used as input to atmospheric transport models to simulate concentration fields, these models therefore fail to capture seasonal variations in ammonia concentration and dry and wet deposition. In this study, seasonal NH₃ emissions from agriculture were modelled on a monthly basis for the year 2000, by incorporating temporal aspects of farming practice. These monthly emissions were then spatially distributed using the AENEID model (Atmospheric Emissions for National Environmental Impacts Determination). The monthly model took the temporal variation in the magnitude of the ammonia emissions, as well as the fine scale (1-km) spatial variation of those temporal changes into account to provide improved outputs at 5-km resolution. The resulting NH₃ emission maps showed a strong seasonal emission pattern, with the highest emissions during springtime (March and April) and the lowest emissions during summer (May to July). This emission pattern was mainly influenced by whether cattle were outside grazing or housed and by the application of manures and fertilizers to the land. When the modelled emissions were compared with measured NH₃ concentrations, the comparison suggested that the modelled emission trend corresponds fairly well with the seasonal trend in the measurements. The remaining discrepancies point to the need to develop functional parametrisations of the interactions with climatic seasonal variation.     

Evaluation of methane emissions from Palermo municipal landfill: Comparison between field measurements and models

Methane (CH₄) diffuse emissions from Municipal Solid Waste (MSW) landfills represent one of the most important anthropogenic sources of greenhouse gas. CH₄ is produced by anaerobic biodegradation of organic matter in landfilled MSW and constitutes a major component of landfill gas (LFG). Gas recovery is a suitable method to effectively control CH₄ emissions from landfill sites and the quantification of CH₄ emissions represents a good tool to evaluate the effectiveness of a gas recovery system in reducing LFG emissions. In particular, LFG emissions can indirectly be evaluated from mass balance equations between LFG production, recovery and oxidation in the landfill, as well as by a direct approach based on LFG emission measurements from the landfill surface. However, up to now few direct measurements of landfill CH₄ diffuse emissions have been reported in the technical literature. In the present study, both modeling and direct emission measuring methodologies have been applied to the case study of Bellolampo landfill located in Palermo, Italy. The main aim of the present study was to evaluate CH₄ diffuse emissions, based on direct measurements carried out with the flux accumulation chamber (static, non-stationary) method, as well as to obtain the CH₄ contoured flux map of the landfill. Such emissions were compared with the estimate achieved by means of CH₄ mass balance equations. The results showed that the emissions obtained by applying the flux chamber method are in good agreement with the ones derived by the application of the mass balance equation, and that the evaluated contoured flux maps represent a reliable tool to locate areas with abnormal emissions in order to optimize the gas recovery system efficiency.     

Modelling of Air Quality with CAMx: A Case Study in Switzerland

The three-dimensional Eulerian model CAMx (Comprehensive Air QualityModel with Extensions) was applied for the first time to simulate bothgaseous and particulate photochemical air pollution in Switzerland during July 28–30, 1993. The meteorological input data were prepared using the Systems Applications International Mesoscale Model (SAIMM). The CAMx model results were compared with the measurements carried out at ground level andfrom airborne measuring platforms within the frame of the Swiss POLLUMET research programme. In general, the CAMx performance for gaseous species wasfound to be better than that of the previously used Urban Airshed Model (UAM)and the Variable Grid Urban Airshed Model (UAM-V). The most significant improvement for the gaseous species is in the prediction of HNO₃ concentrations, due to the inclusion of aerosol chemistry. Aerosol species such as NO₃ ^-, NH₄ ⁺, SO₄ ^2-, and secondary organic aerosols were calculated in one particle size range (0.04–2.5 m) and compared with a few measurements available. Although July 29 was reasonably well simulated, overestimated wind speeds by SAIMM for July 30 caused a too fast transport of pollutants. Similarly to measurements, significant spatial correlation of the secondarily formed aerosols with ozone and formaldehyde is found in the afternoon.     

Incineration of healthcare wastes: management of atmospheric emissions through waste segregation

The amount of atmospheric pollutants emitted through the incineration of healthcare wastes can be estimated using emission factors. Emission factors have been published without including sufficient information about the types of wastes incinerated. This paper reports the first emission factors estimated for the incineration of wastes segregated into different types according to the Portuguese legislation. One controlled-air incinerator without air pollution control devices was used in the research. The main objectives of the study were: (i) to estimate the emission factors for particulate matter, dioxins, heavy metals and gaseous pollutants, according to the type of waste incinerated; (ii) to evaluate the quality of atmospheric emissions; and (iii) to define a methodology for the management of atmospheric emissions, evaluating the influence of type of waste incinerated and of the segregation method used on the emitted amounts. It was concluded that: (i) when emission factors are not associated with the type of incinerated mixture, the utility of the emission factors is highly doubtful; (ii) without appropriate equipment to control atmospheric pollution, incineration emissions exceed legal limits, neglecting the protection of human health (the legal limit for pollutant concentrations could only be met for NO(x), all other concentrations were higher than the maximum allowed: dioxins, 93-710 times; Hg, 1.3-226 times; CO, 11-24 times; SO(2), 2-5 times; and HCl, 9-200 times); (iii) rigorous segregation methodologies must be used to minimize atmospheric emissions, and incinerate only those wastes that should be incinerated according to the law. A rigorous segregation program can result in a reduction of the amount of waste that should be incinerated by 80%. A reduction in the quantity of waste incinerated results in a reduction on the amounts of pollutants emitted: particulate matter, 98%; dioxins, 99.5%; As, Cd, Cr, Mn and Ni, respectively, 90%, 92%, 84%, 77% and 92%; Hg and Pb, practically eliminated; SO(2) and NO(x), 93%; and CO and HCl, more than 99%.     

Long Term NH3 Flux Measurements above Grasslands in The Netherlands

Ammonia concentration gradients were measuredabove a grassland in an agricultural region fromJuly 1998 to July 2000 at the locationSchagerbrug in the Netherlands. They were used tocalculate the surface-atmosphere exchange ofammonia by means of the aerodynamic gradienttechnique. Measurements of the ammonia exchangewere also performed at a grass field that is partof a major wetland reserve in the centre of theNetherlands (Oostvaardersplassen), during theperiod June 1994–September 1995. At Schagerbrug,low net emissions or small depositions weremeasured during the winter months, and a netemission up to 5 kg NH₃ ha^-1 month^-1 in summer. The net annual emission was 26 kgN ha^-1, with manure application contributingabout 50% of this emission. AtOostvaardersplassen mainly deposition occurred,but large emissions were measured in autumn. Themeasured exchange fluxes are compared to modelevaluations that incorporate plant physiologicaldata, such as apoplastic NH₄ ⁺concentrations and pH. Results show a goodagreement between field observations and modelsimulations, although some improvements arenecessary during nighttime periods. Themeasurements are conducted within the GRAMINAEproject, a second tranche project of EC TERI.     

Particulate and gaseous emissions during fluidized bed combustion of semi-dried sewage sludge: Effect of bed ash accumulation on NOx formation

Combustion of two semi-dried sewage sludges in a 110 mm has been characterized in terms of particulate and gaseous emissions. Sludges differed in that they had been conditioned – at the flocculation stage of wastewater treatment – either with Ca-based inorganics or with polyelectrolytes. Combustion was efficient for both sewage sludges under all the operating conditions tested. Significant differences have instead been observed between the two types of sewage sludges as regards particulate and macro-pollutant gaseous emissions (SO₂, NO_x). NO_x formation is significantly influenced by ash accumulation inside the bed only when sewage sludge conditioned with Ca-based inorganics is fired. The time-resolved profiles of NO_x concentration and the mass flow rate of the elutriated fines have been worked out to evaluate the fuel nitrogen yield to NO_x as a function of ash accumulated inside the bed divided by the air mass feed rate. Experimental results have been compared with data present in literature.     

Tracer method to measure landfill gas emissions from leachate collection systems

This paper describes a method developed for quantification of gas emissions from the leachate collection system at landfills and present emission data measured at two Danish landfills with no landfill gas collection systems in place: Fakse landfill and AV Miljø. Landfill top covers are often designed to prevent infiltration of water and thus are made from low permeable materials. At such sites a large part of the gas will often emit through other pathways such as the leachate collection system. These point releases of gaseous constituents from these locations cannot be measured using traditional flux chambers, which are often used to measure gas emissions from landfills. Comparing tracer measurements of methane (CH₄) emissions from leachate systems at Fakse landfill and AV Miljø to measurements of total CH₄ emissions, it was found that approximately 47% (351 kg CH₄ d^?1) and 27% (211 kg CH₄ d^?1), respectively, of the CH₄ emitting from the sites occurred from the leachate collection systems. Emission rates observed from individual leachate collection wells at the two landfills ranged from 0.1 to 76 kg CH₄ d^?1. A strong influence on emission rates caused by rise and fall in atmospheric pressure was observed when continuously measuring emission from a leachate well over a week. Emission of CH₄ was one to two orders of magnitude higher during periods of decreasing pressure compared to periods of increasing pressure.     

Measurements of particulate matter concentrations at a landfill site (Crete,Greece)

Large amounts of solid waste are disposed in landfills and the potential of particulate matter (PM) emissions into the atmosphere is significant. Particulate matter emissions in landfills are the result of resuspension from the disposed waste and other activities such as mechanical recycling and composting, waste unloading and sorting, the process of coating residues and waste transport by trucks. Measurements of ambient levels of inhalable particulate matter (PM₁₀) were performed in a landfill site located at Chania (Crete, Greece). Elevated PM₁₀ concentrations were measured in the landfill site during several landfill operations. It was observed that the meteorological conditions (mainly wind velocity and temperature) influence considerably the PM₁₀ concentrations. Comparison between the PM₁₀ concentrations at the landfill and at a PM₁₀ background site indicates the influence of the landfill activities on local concentrations at the landfill. No correlation was observed between the measurements at the landfill and the background sites. Finally, specific preventing measures are proposed to control the PM concentrations in landfills.     

Carbon accounting for Japanese petrochemicals

This paper discusses two bottom-up models for the estimation of carbon storage and CO₂ emissions related to the nonenergy use of fossil energy carriers. The models show how material flow accounting can be applied to policy making. The nonenergy use emission accounting tables model is a static model, while the chemical industry environmental strategy assessment program (CHEAP) model is a dynamic model of the flows of synthetic organic materials. Both models provide detailed and more accurate estimates of carbon storage in materials than the accounting method that is currently used in the framework of the Intergovernmental Panel on Climatic Change (IPCC) guidelines. The results for both models suggest that carbon storage in synthetic organic materials has been overestimated, and consequently CO₂ emissions have been underestimated. Japanese CO₂ emissions in 1996 were at least 1.9% higher than reported previously. The CHEAP model results indicate that the net carbon storage (storage − emissions in waste incineration) will decrease during the next few decades. This decrease is mainly driven by changing waste management practice. Received: December 8, 2000 / Accepted: August 15, 2001     

Management of municipal solid waste incineration residues

The management of residues from thermal waste treatment is an integral part of waste management systems. The primary goal of managing incineration residues is to prevent any impact on our health or environment caused by unacceptable particulate, gaseous and/or solute emissions. This paper provides insight into the most important measures for putting this requirement into practice. It also offers an overview of the factors and processes affecting these mitigating measures as well as the short- and long-term behavior of residues from thermal waste treatment under different scenarios. General conditions affecting the emission rate of salts and metals are shown as well as factors relevant to mitigating measures or sources of gaseous emissions.     

Uncontrolled methane emissions from a MSW landfill surface: Influence of landfill features and side slopes

Sanitary landfills for Municipal Solid Waste (MSW) disposal have been identified as one of the most important anthropogenic sources of methane (CH₄) emissions; in order to minimize its negative effects on the environment, landfill gas (LFG) recovery is a suitable tool to control CH₄ emissions from a landfill site; further, the measurement of CH₄ emissions can represent a good way to evaluate the effectiveness of LFG recovering systems. In general, LFG will escape through any faults in the landfill capping or in the LFG collection system. Indeed, some areas of the capping can be more permeable than others (e.g. portions of a side slope), especially when considering a temporarily capped zone (covered area that is not expected to receive any further waste for a period of at least 3 months, but for engineering reasons does not have a permanent cap yet). These areas, which are characterized by abnormal emissions, are usually defined as “features”: in particular, a feature is a small, discrete area or an installation where CH₄ emissions significantly differ from the surrounding zones. In the present study, the influence that specific features have on CH₄ emissions has been investigated, based on direct measurements carried out in different seasons by means of a flux chamber to the case study of Palermo (IT) landfill (Bellolampo). The results showed that the flux chamber method is reliable and easy to perform, and the contoured flux maps, obtained by processing the measured data were found to be a suitable tool for identifying areas with abnormal (high) emissions. Further, it was found that a relationship between methane emission rates and landfill side slope can be established. Concerning the influence of the temporary HDPE cover system on CH₄ recovery efficiency, it contributed to a significant decrease of the free surface area available for uncontrolled emissions; this aspect, coupled to the increase of the CH₄ volumes collected by the LFG recovery system, led to a significant increase of the recovery efficiency.     

Mathematical modeling of MSW combustion and SNCR in a full-scale municipal incinerator and effects of grate speed and oxygen-enriched atmospheres on operating conditions

The rising popularity of incineration of municipal solid waste (MSW) calls for detailed mathematical modeling and accurate prediction of pollutant emissions. In this paper, mathematical modeling methods for both solid and gaseous phases were employed to simulate the operation of a 450 t/d MSW-burning incinerator to obtain detailed information on the flow and combustion characteristics in the furnace and to predict the amount of pollutant emissions. The predicted data were compared to on-site measurements of gas temperature, gas composition and SNCR de-NO_X system. The major operating conditions considered in this paper were grate speed and oxygen concentration. A suitable grate speed ensures complete waste combustion. The predictions are as follows: volatile release increases with increasing grate speed, and the maximal value is within the range of 700–800 kg/m² h; slow grate speeds result in incomplete combustion of fixed carbon; the gas temperature at slow grate speeds is higher due to adequate oxygenation for fixed carbon combustion, and the deviation reaches 200 K; NO_X emission decreases, but CO emission and O₂ concentrations increase, and the deviation is 63%, 34% and 35%, respectively. Oxygen-enriched atmospheres promote the destruction of most pollutants due to the high oxygen partial pressure and temperature. The furnace temperature, NO production and CO emission increase as the oxygen concentration increases, and the deviation of furnace exit temperature, NO and CO concentration is 38.26%, 58.43% and 86.67%, respectively. Finally, oxygen concentration is limited to below 35% to prevent excessive CO and NO_X emission without compromising plant performance. The current work greatly helps to understand the operating characteristics of large-scale MSW-burning plants.     

Controlling Air Toxics Emissions From Remediation by Monitoring of Surrogate Parameters

Particulate matter (dust) from remediation and demolition sites may pose a potential risk to the nearby public due to the presence of various contaminants. Unfortunately, there are no good options for real‐time monitoring of metals, polychlorinated biphenyls, etc. in wind‐blown dust. A three‐tiered approach involving a combination of real‐time monitoring and off‐site analysis that has proved successful is described in this article. PM₁₀ is used as a surrogate parameter for metals and other nonvolatile pollutants, and real‐time monitoring is used to guide dust control measures. If dust emissions are controlled, air emissions of metals and other nonvolatile pollutants also are controlled. © 2014 Wiley Periodicals, Inc.     

Identification of PM10 Sources in a Mediterranean Island

Due to the dry Mediterranean climate in Cyprus, particulate matter is resuspended from soils and other surfaces. From November 2002 to August 2003, gravimetric PM₁₀ measurements were carried out at three characteristic sites (traffic, residential and rural). A significant seasonal trend with high winter concentrations was observed at the traffic site. Special events, e.g. long-range transport of Sahara dust storms, were recorded over traffic, residential and rural areas in the order of six to eight events per year, with a major frequency in summer and spring periods. This contributes to the increase of 24-h EU limit value exceedances for PM₁₀ at the three investigated sites. The origin of the PM₁₀ load was determined by enrichment factors based on analyses of the local soil deposition at the investigated sites. Furthermore, positive matrix factorisation modelling was applied to find the sources of PM₁₀. Results indicate that the major emission sources affecting the PM₁₀ load were mineral soil, sea salt, road dust, oil combustion, secondary pollutants and gasoline vehicles. The natural contribution (local mineral soil and sea salt) at the three sites was in the range of 7–9 μg m^?3 in PM₁₀. Besides the Sahara dust storms and natural background concentrations, the vehicular pollution was found as the largest contributor (12–14 μg m^?3) to PM₁₀ load at the traffic site.     

Quantification of methane emissions from full-scale open windrow composting of biowaste using an inverse dispersion technique

An inverse dispersion technique in conjunction with Open-Path Tunable-Diode-Laser-Spectroscopy (OP-TDLS) and meteorological measurements was applied to characterise methane (CH₄) emissions from an Austrian open-windrow composting plant treating source-separated biowaste. Within the measurement campaigns from July to September 2012 different operating conditions (e.g. before, during and after turning and/or sieving events) were considered to reflect the plant-specific process efficiency. In addition, the tracer technique using acetylene (C₂H₂) was applied during the measurement campaigns as a comparison to the dispersion model. Plant-specific methane emissions varied between 1.7 and 14.3 g CH₄/m³d (1.3–10.7 kg CH₄/h) under real-life management assuming a rotting volume of 18,000 m³. In addition, emission measurements indicated that the turning frequency of the open windrows appears to be a crucial factor controlling CH₄ emissions when composting biowaste. The lowest CH₄ emission was measured at a passive state of the windrows without any turning event (“standstill” and “sieving of matured compost”). Not surprisingly, higher CH₄ emissions occurred during turning events, which can be mainly attributed to the instant release of trapped CH₄. Besides the operation mode, the meteorological conditions (e.g. wind speed, atmospheric stability) may be further factors that likely affect the release of CH₄ emissions at an open windrow system. However, the maximum daily CH₄ emissions of 1 m³ rotting material of the composting plant are only 0.7–6.5% of the potential daily methane emissions released from 1 m³ of mechanically–biologically treated (MBT) waste being landfilled according to the required limit values given in the Austrian landfill ordinance.     

Influence of Traffic Emissions Estimation Variability on Urban Air Quality Modelling

The main objective of this work is to analyse how uncertainties in emission data of nitrogen oxides (NO_x) and volatile organic compounds (VOC), originated from road traffic, influence the model prediction of ozone (O₃) concentration fields. Different methods to estimate emissions were applied and results were compared in order to obtain their variability. Based on these data, different emission scenarios were compiled for each pollutant considering the minimum and the maximum values of the estimated emission range. These scenarios were used as input to the MAR-IV mesoscale modelling system. Simulations have been performed for a summer day in the Northern Region of Portugal. The different approaches to estimate NO_x and VOC traffic emissions show a significant variability of absolute values and of their spatial distribution. Comparison of modelling results obtained from the two scenarios presents a dissimilarity of 37% for ozone concentration fields as a response of the system to a variation in the input emission data of 63% for NO_x and 59% for VOC. Far beyond all difficulties and approximations, the developed methodology to build up an emission data base shows to be consistent and an useful tool in order to turn applicable an air quality model. Nevertheless, the sensitivity of the model to input data should be considered when it is used as a decision support tool.     

Characterizing emissions from open burning of military food waste and ration packaging compositions

Emissions from open burning of military food waste and ration packaging compositions were characterized in response to health concerns from open burning disposal of waste, such as at military forward operating bases. Emissions from current and prototype Meals, Ready-to-Eat (MREs), and material options for their associated fiberboard packaging were quantified to assess contributions of the individual components. MREs account for 67–100% of the particulate matter (PM), volatile organic compounds (VOCs), polycyclic aromatic hydrocarbons (PAHs), and polychlorinated dibenzo-p-dioxins and -furans (PCDDs/PCDFs) emissions when burned in unison with the current fiberboard container and liner. The majority of the particles emitted from these burns are of median diameter 2.5 µm (PM_2.5). Metal emission factors were similar regardless of waste composition. Measurements of VOCs and PAHs indicate that targeted replacement of MRE components may be more effective in reducing emissions than variation of fiberboard-packaging types. Despite MRE composition variation, equivalent emission factors for PM, PAH, VOC, and PCDD/PCDF were seen. Similarly, for fiberboard packaging, composition variations exhibited essentially equivalent PM, PAH, VOC, and PCDD/PCDF emission factors amongst themselves. This study demonstrated a composition-specific analysis of waste burn emissions, assessing the impact of waste component substitution using military rations.     

A Global Outlook to the Carbon Dioxide Emissions in the World and Emission Factors of the Thermal Power Plants in Turkey

World primary energy demand increases with increases in population and economic development. Within the last 25 yr, the total energy consumption has almost doubled. For the purpose of meeting this demand, fossil energy sources are used and various pollutants are generated. CO₂ is also one of these gases, which cannot be removed like other pollutants, and it causes greenhouse effect and climate change. Reducing the CO₂ emission is very important because of the environmental concerns and regulations, especially the Kyoto Protocol. This paper reviews the estimated world carbon emissions, Turkey's situation in electrical energy production, emission amounts estimated until the year 2020 and emission factors for dust, SO₂, NO_x and CO₂. The estimated results show that CO₂ emissions from thermal power plants in Turkey will make about 0.66 % of the global CO₂ emissions in 2020.     

新型旋流除尘器在100万吨/年乙烯装置尾气除尘中的应用

为了去除石化行业乙烯装置裂解炉烧焦尾气中的颗粒污染物,对传统用于气体除尘的旋风分离器进行改进,设计了一种新型旋流除尘器,并将其应用于乙烯装置裂解炉清焦过程中。经新型旋流除尘器处理后,出口气中焦粉颗粒质量浓度基本控制在15 mg/m³以下,符合GB 31570—2016《石油炼制工业污染物排放标准》的排放要求（≤20 mg/m³）,平均分离效率达到92.8%,粒径在10 μm以上的焦粉颗粒得到大幅度去除。