浅析某厂化学镀镍线的主要污染物及处理措施

某厂化学镀镍线产生的主要污染物为大气污染、水污染和固体废物污染。其中大气污染物主要为硫酸雾。水污染物为总镍、总铜、化学需氧量、悬浮物、总磷、氨氮等。固废废弃物均为危险废物,包括废包装材料、酸性废液、含镍废液。该文分析了化学镀镍线产生的废气、废水和固体废物的主要来源,并提出了防止污染的对策。     

Present status of recycling waste mobile phones in China: a review

A large number of waste mobile phones have already been generated and are being generated. Various countries around the world have all been positively exploring the way of recycling and reuse when facing such a large amount of waste mobile phones. In some countries, processing waste mobile phones has been forming a complete industrial chain, which can not only recycle waste mobile phones to reduce their negative influence on the environment but also turn waste into treasure to acquire economic benefits dramatically. However, the situation of recycling waste mobile phones in China is not going well. Waste mobile phones are not formally covered by existing regulations and policies for the waste electric and electronic equipment in China. In order to explore an appropriate system to recover waste mobile phones, the mobile phone production and the amount of waste mobile phones are introduced in this paper, and status of waste mobile phones recycling is described; then, the disposal technology of electronic waste that would be most likely to be used for processing of electronic waste in industrial applications in the near future is reviewed. Finally, rationalization proposals are put forward based on the current recovery status of waste mobile phones for the purpose of promoting the development of recycling waste mobile phones in developing countries with a special emphasis on China.     

超声破解污泥影响因素分析

超声破解是促进污泥快速厌氧消化的一项新技术,不仅超声波参数直接影响污泥破解效果,而且污泥性质和辅助条件也影响污泥破解效果.以污泥溶解性化学需氧量增加值(SCOD )和污泥破解度(DDSCOD)为评价参数,通过超声破解不同性质污泥试验,得出污泥的初始温度、pH值和污泥浓度等参数对污泥破解效果起重要作用.增加搅拌和曝气辅助条件破解污泥的试验,得出间歇搅拌和曝气能增强污泥超声破解效果.     

城市固体废物管理源头政策调控系统动力学模型

把城市居民固体废弃物源头调控政策、居民的废弃物分类行为与固体废弃物处置管理系统看成动态演化的反馈系统.在固体废弃物从量收费政策和法规政策影响下,采用系统动力学模型分析居民参与废弃物管理的行为对整个废弃物管理系统的动态影响.用开发的昆明城市同体废弃物系统动力学模型对3种设定的政策情景进行了仿真.结果表明:要实现同体废弃物处置与管理的可持续发展,必须在源头上通过收费和法规等政策促使居民参加到废弃物管理系统中,注重提高资源化和无害化能力的同时,要加强源头减量和回收的力度,减少废弃物的非法处置.     

Stabilization and Solidification of Metal-Laden Wastes by Compaction and Magnesium Phosphate-Based Binder

ABSTRACT

Bench-scale and full-scale investigations of waste stabilization and volume reduction were conducted using spiked soil and ash wastes containing heavy metals such as Cd, Cr, Pb, Ni, and Hg. The waste streams were stabilized and solidified using chemically bonded phosphate ceramic (CBPC) binder, and then compacted by either uniaxial or harmonic press for volume reduction. The physical properties of the final waste forms were determined by measuring volume reduction, density, porosity, and compressive strength. The leachability of heavy metals in the final waste forms was determined by a toxicity characteristic leaching procedure (TCLP) test and a 90-day immersion test (ANS 16.1). The structural composition and nature of waste forms were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively.

CBPC binder and compaction can achieve 80-wt % waste loading and 39-47% reduction in waste volume. Compressive strength of final waste forms ranged from 1500 to 2000 psi. TCLP testing of waste forms showed that all heavy metals except Hg passed the TCLP limits using the phosphate-based binder. When Na₂S was added to the binder, the waste forms also passed TCLP limits for Hg. Long-term leachability resistance of the final waste forms was achieved for all metals in both soil and ash wastes, and the leachability index was ~14. XRD patterns of waste forms indicated vermiculite in the ash waste was chemically incorporated into the CBPC matrix. SEM showed that waste forms are layered when compacted by uniaxial press and are homogeneous when compacted by harmonic press.     

Stabilization and solidification of metal-laden wastes by compaction and magnesium phosphate-based binder

Bench-scale and full-scale investigations of waste stabilization and volume reduction were conducted using spiked soil and ash wastes containing heavy metals such as Cd, Cr, Pb, Ni, and Hg. The waste streams were stabilized and solidified using chemically bonded phosphate ceramic (CBPC) binder, and then compacted by either uniaxial or harmonic press for volume reduction. The physical properties of the final waste forms were determined by measuring volume reduction, density, porosity, and compressive strength. The leachability of heavy metals in the final waste forms was determined by a toxicity characteristic leaching procedure (TCLP) test and a 90-day immersion test (ANS 16.1). The structural composition and nature of waste forms were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. CBPC binder and compaction can achieve 80-wt% waste loading and 39-47% reduction in waste volume. Compressive strength of final waste forms ranged from 1500 to 2000 psi. TCLP testing of waste forms showed that all heavy metals except Hg passed the TCLP limits using the phosphate-based binder. When Na2S was added to the binder, the waste forms also passed TCLP limits for Hg. Long-term leachability resistance of the final waste forms was achieved for all metals in both soil and ash wastes, and the leachability index was approximately 14. XRD patterns of waste forms indicated vermiculite in the ash waste was chemically incorporated into the CBPC matrix. SEM showed that waste forms are layered when compacted by uniaxial press and are homogeneous when compacted by harmonic press.     

Evaluation of Continuous Performance Monitoring Techniques for Hazardous Waste Incinerators

This paper discusses monitoring the waste destruction efficiency of hazardous waste incinerators. The particular problem is to ensure that incinerators do not release, without detection, significant quantities of waste as a result of operating fluctuations or equipment degradation. To detect these conditions, continuous, automated, and real-time source monitoring is required. Detection of degraded performance by monitoring and measuring waste compounds directly is not presently possible on a continuous basis. An alternative is to use commercially available continuous monitors to measure combustion intermediates (e.g., CO or hydrocarbons) and thereby infer waste destruction efficiency. Required, however, is a correlation between the emission of intermediates and the emission of waste. In this paper, the response of a number of these continuous monitors is compared with waste destruction efficiency measurements from a laboratory scale, liquid-spray incinerator operated on fuel oil doped with model waste compounds: benzene, chlorobenzene, acrylonitrile, and chloroform. Total hydrocarbon and CH₄ measurements are found to vary with waste emission in a nearly linear manner; however, a substantial increase in CO emission occurs before a significant amount of waste is released. These results suggest that CO may serve as an indicator of the approach of waste release, while total hydrocarbons may provide an indicator of immediate waste release.     

Public Policy impacts on the Generation and Disposal of Hazardous Waste in New York State

A number of policies adopted by the federal government and the states have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects.

Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to “higher” waste handling technologies in response to several policy interventions.     

Characteristics and management modes of domestic waste in rural areas of developing countries: a case study of China

A huge accumulation of domestic waste has caused serious environmental contamination in rural areas of developing countries (RADIC). The characteristics and management of domestic waste are carefully discussed, based on field surveys and a literature review. The results indicate that the generation in most of RADIC is less than the median of 0.521 kg day⁻¹ per capita in China, and much smaller than in rural areas of developed countries (RADEC). Organic waste and inert waste with an accumulative mass percentage of 72.31% are dominant components of domestic waste in the rural areas of China. There are trends of increasing amounts of kitchen waste, paper/cardboard, and plastic/rubber and a decreasing trend of ash waste. The RADIC composition of domestic waste had a high content of organic waste and a low content of recyclable waste compared to the RADEC. Domestic waste has good compressibility and a light bulk density ranging from 40 to 650 kg m⁻³. The moisture, ash, combustible, and calorific values of domestic waste were 53.31%, 18.03%, 28.67%, and 5368 kJ kg⁻¹, respectively. The domestic waste has an abundance of nutrients including organic matter (39.05%), nitrogen (1.02%), phosphorus (0.50%), and potassium (1.42%). In RADIC, domestic waste can be used as an agricultural manure only after it has been collected and sorted for the potential risk of heavy metal accumulation. Based on these characteristics of domestic waste and the different situations of rural areas, four waste management modes including centralized treatment, decentralized treatment, group treatment, and mobile treatment are designed and discussed.

     

固体废物相关概念的基本特点

固体废物法对废物的一些概念进行了定义,在固体废物环境管理当中,对这些概念缺乏深入认识,导致在实际管理中对固体废物和危险废物的调查、认定、统计、管理、预测、设施建设等一系列与废物相关的行动出现偏差甚至不准确。对固体废物、危险废物以及废物利用、处置、贮存、排放等概念包含的内容进行了研究,提出了一些新的认识观点。     

Public policy impacts on the generation and disposal of hazardous waste in New York State

A number of policies adopted by the federal government and the state have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects. Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to "higher" waste handling technologies in response to several policy interventions.     

Hazardous wastes and economic risk reduction: case study, Poland

A concise summary balance of industrial and hazardous waste is given, reflecting the situation in Poland. Nearly 130 million tonnes of waste were generated annually in the past in more than 1300 larger industrial plants. Approximately 1800 million tonnes of industrial waste is already stockpiled. The amount of hazardous waste generated per year was 0.3 and 1.0 million tonnes of the first and second class of toxicity, respectively. Seventeen existing on-site incinerators cannot treat the whole amount of solid and hazardous waste generated. Therefore, landfilling is still the most widely used method of waste disposal. Decontamination of the abandoned areas left by the Soviet Army, and reclamation of some hundreds of storage sites filled with outdated pesticides are now added to the national plan of waste management. Its implementation, including introduction of the best available and best managed technologies of hazardous waste treatment and disposal, will take at least 20 to 30 years.     

Concept of sustainable waste management in the city of Zagreb: Towards the implementation of circular economy approach

Improvement of the current waste management is one of the main challenges for most municipalities in Croatia, mainly due to legal obligations set in different European Union (EU) directives regarding waste management, such as reduction of waste generation and landfilling, or increase of separately collected waste and recycling rates. This paper highlights the current waste management in the city of Zagreb by analyzing the waste generation, collection, and disposal scenario along with the regulatory and institutional framework. Since the present waste management system mainly depends upon landfilling, with the rate of separate waste collection and recycling far from being adequate, it is necessary to introduce a new system that will take into account the current situation in the city as well as the obligations imposed by the EU. Namely, in the coming years, the Waste Framework and Landfill Directives of the European Union will be a significant driver of change in waste management practices and governance of the city of Zagreb. At present, the yearly separate waste collection makes somewhat less than 5 kg per capita of various waste fractions, i.e., far below the average value for the (28) capital cities of the EU, which is 108 kg per capita. This is possible to achieve only by better and sustainable planning of future activities and facilities, taking into account of environmental, economic, and social aspects of waste management. This means that the city of Zagreb not only will have to invest in new infrastructure to meet the targets, but also will have to enhance public awareness in diverting this waste at the household level. The solution for the new waste management proposed in this paper will certainly be a way of implementing circular economy approach to current waste management practice in the city of Zagreb.

Implications: Municipal waste management in the developing countries in the EU (new eastern EU members) is often characterized by its limited utilization of recycling activities, inadequate management of nonindustrial hazardous waste, and inadequate landfill disposal. Many cities in Eastern Europe and Zagreb as well are facing serious problems in managing municipal wastes due to the existing solid waste management system that is found to be highly inefficient. The proposed scenario for city of Zagreb in the paper is an innovative upgrading of municipal waste management based on the waste management hierarchy and circular economy approach.     

Food waste collection and recycling for value-added products: potential applications and challenges in Hong Kong

About 3600 tonnes food waste are discarded in the landfills in Hong Kong daily. It is expected that the three strategic landfills in Hong Kong will be exhausted by 2020. In consideration of the food waste management environment and community needs in Hong Kong, as well as with reference to the food waste management systems in cities such as Linköping in Sweden and Oslo in Norway, a framework of food waste separation, collection, and recycling for food waste valorization is proposed in this paper. Food waste can be packed in an optic bag (i.e., a bag in green color), while the residual municipal solid waste (MSW) can be packed in a common plastic bag. All the wastes are then sent to the refuse transfer stations, in which food waste is separated from the residual MSW using an optic sensor. On the one hand, the sorted food waste can be converted into valuable materials (e.g., compost, swine feed, fish feed). On the other hand, the sorted food waste can be sent to the proposed Organic Waste Treatment Facilities and sewage treatment works for producing biogas. The biogas can be recovered to produce electricity and city gas (i.e., heating fuel for cooking purpose). Due to the challenges faced by the value-added products in Hong Kong, the biogas is recommended to be upgraded as a biogas fuel for vehicle use. Hopefully, the proposed framework will provide a simple and effective approach to food waste separation at source and promote sustainable use of waste to resource in Hong Kong.     

Hazardous Waste Minimization: Part VI Waste Minimization in the Foundry Industry

The foundry industry is a major consumer of waste materials (scrap). Unfortunately, the recycling of these waste materials can result in the generation of hazardous wastes that must be properly managed at a significant cost. This article focuses on two waste streams in the foundry industry; calcium carbide desulfurization slag and melt emission control residuals. The author presents an overview of how foundries have evaluated different waste management options with the ultimate goal of minimizing the generation of hazardous waste.     

洗像废液的分质处理

对洗像过程中产生的洗像废液按照成分的不同进行分质处理。其中 ,有机废液采用高温焚烧的方法进行处理 ;无机废液根据主要成分的化学性质分别采用中和、氧化等方法进行处理。通过室内试验 ,确定了处理工艺的主要参数 ,并根据试验结果 ,利用废液处理站设施处理了 1.6 4t洗像废液。处理后排放的废水、废气均达到了国家有关排放标准     

Estimating historical landfill quantities to predict methane emissions

There are no observations for methane emissions from landfill waste in Ireland. Methane emissions are imputed from waste data. There are intermittent data on waste sent to landfill. We compare two alternative ways to impute the missing waste “data” and evaluate the impact on methane emissions. We estimate Irish historical landfill quantities from 1960–2008 and Irish methane emissions from 1968–2006. A model is constructed in which waste generation is a function of income, price of waste disposal and, household economies of scale. A transformation ratio of waste to methane is also included in the methane emissions model. Our results contrast significantly with the Irish Environmental Protection Agency’s (EPA) figures due to the differences in the underlying assumptions. The EPA’s waste generation and methane emission figures are larger than our estimates from the early 1990s onwards. Projections of the distance to target show that the EPA overestimates the required policy effort.     

Characterization of municipal waste in Kampala,Uganda

In Kampala, Uganda, about 28,000 tons of waste is collected and delivered to a landfill every month. Kampala Capital City Authority (KCCA) records show that this represents approximately 40% of the waste generated in the city. The remaining uncollected waste is normally dumped in unauthorized sites, causing health and environmental problems. However, the organic fraction of domestic waste can provide an opportunity to improve livelihoods and incomes through fertilizer and energy production. This study characterized the municipal waste generated in Kampala and delivered to Kiteezi landfill between July 2011 and June 2012, that is, covering the dry and wet months. On each sampling day, waste was randomly selected from five trucks, sorted and weighed into different physical fractions. Samples of the organic waste from each truck were analyzed for total solids, major nutrients, and energy content. During the wet months, the waste consisted of 88.5% organics, 3.8% soft plastics, 2.8% hard plastics, 2.2% paper, 0.9% glass, 0.7% textiles and leather, 0.2% metals, and 1.0% others. During the dry months, the waste consisted of 94.8% organics, 2.4% soft plastics, 1.0% hard plastics, 0.7% papers, 0.3% glass, 0.3% textile and leather, 0.1% metals, and 0.3% others. The organic waste on average had a moisture content of 71.1% and contained 1.89% nitrogen, 0.27% phosphorus, and 1.95% potassium. The waste had an average gross energy content of 17.3 MJ/kg. It was concluded that the organic waste generated can be a suitable source of some plant nutrients that are useful especially in urban agriculture.

Implications:?The result of the waste characterization in Kampala was found to be significantly different from that obtained for other Sub-Saharan African (SSA) cities, showing that studies assuming average values for the waste fractions are likely to result in erroneous results. Furthermore, no reduction in organic fraction of the waste was noticed when compared with a study done two decades ago in spite of greatly improved economic status of Kampala city, a finding that is not in agreement with several other similar studies done for other SSA cities.     

Antimony in municipal waste.

Antimony content in municipal waste was studied. Sampled municipal waste was dried, crushed and analyzed. Antimony determinations were performed by Kjeldahl decomposition--batch hydride generation spectrometry and neutron activation analysis. Overall content of antimony in waste was 40-50 g/t raw waste. It was estimated than 20% of the annual production of antimony was discarded as municipal waste in Japan. Leaching of antimony from antimony-added materials may occur, because "small tips" involved considerable amounts of antimony.     

Hazardous Waste Minimization: Part II Waste Minimization in the Electronics Products Industries

An overview is provided of the production processes, waste generation, and waste management of the electronics products industries. Chosen product areas include electron tubes, semiconductors, capacitors/resistors, and printed circuit/wiring boards. Examples are given of specific processes and associated waste streams. Waste minimization activities are identified, and specific examples of successful applications provided. While faced with a wide variety of waste streams, many opportunities for waste minimization exist and await only application.