Photodegradation of an azo dye of the textile industry

An advanced oxidation treatment, UV/H2O2, was applied to an azo dye, Hispamin Black CA, widely used in the Peruvian textile industry. Rates of color removal and degradation of the dye have been evaluated. A strongly absorbing solution was completely decolorized after 35 min of treatment, and after 60 min an 82% reduction of the total organic carbon (TOC) was obtained. It has been found that the degradation rate increased until an optimum value, beyond which the reagent exerted an inhibitory effect. The degradation rate was also function of pH.     

A Comparison of Various Sources of Automotive Emissions

Chlorinated phenolic hydrocarbons are used as intermediate chemicals in the manufacture of 2,4-D (2,4-Dichlorophenoxy-acetic Acid) and related herbicides. These chemicals have an unusual odor with an extremely low threshold level of detection and consequently the manufacture and handling of these compounds poses a difficult odor control problem. Chipman Chemical Company at its Portland, Oregon plant has developed a system of fume collection and caustic soda solution scrubbing capable of removing phenolic compounds in the plant exhaust air to an acceptable level from an odor release standpoint. This article describes the development, present status, and projected future improvements of this odor control system.     

The prediction of the numbers of violations of standards and the frequency of air pollution episodes using extreme value theory

Extreme value theory is discussed in a manner suitable for scientists working in the air pollution area. The method of application of the theory is described by means of an example analysis on an ozone data set and the theory is applied to several data sets collected in Brisbane, Queensland, Australia. The theory is used to predict the number of violations of WHO and U.S. standards expected in the year following data collection. Comparison of these predictions with the relevant observations shows that the theory does quite well. Ways of using extreme value theory as an air quality management tool are suggested.     

Comparative study of microbial dechlorination of chlorinated ethenes in an aquifer and a clayey aquitard

In order to determine whether natural attenuation of chlorinated ethenes by microbial activity occurs in aquitards, sediments at a site contaminated with tetrachloroethene were vertically studied by drilling. The distribution of microbes (Dehalococcoides group and anaerobic hydrogen producers) and the ability of the sediments to sustain microbial dechlorination were determined in an aquitard as well as in an aquifer. Close-spaced sampling revealed the existence of large populations of Dehalococcoides and H(2)-producing bacteria, especially in the organic-rich clayey aquitard rather than in the aquifer. The vinyl chloride reductase gene was also detected in the clay layer. Furthermore, incubation experiments indicated that the clay sediment could sustain transformations of tetrachloroethene at least to vinyl chloride. In contrast, no significant transformation was observed in the aquifer sand. Our results indicate that dechlorination of tetrachloroethene by bacteria can take place in an organic-rich clayey aquitard, and that organic-rich clay may also be important in the natural attenuation in an adjacent aquifer, possibly supplying a carbon source or an electron donor.     

An in situ study of the effect of nitrate on the reduction of trichloroethylene by granular iron

The effect of nitrate on the reduction of TCE by commercial granular iron was investigated in column experiments designed to allow for the in situ monitoring of the iron surface film with Raman spectroscopy. Three column experiments were conducted; one with an influent solution of 100 mg/l nitrate+1.5 mg/l TCE, and two control columns, one saturated directly with 100 mg/l nitrate solution, the other pre-treated with Millipore water prior to the introduction of a 100 mg/l nitrate solution. In the presence of nitrate, TCE adsorbed onto the iron, but there was little TCE reduction to end-products ethene and ethane. The iron used (Connelly, GPM, Chicago) is a product typical of those used in permeable granular iron walls. The material is covered by an air-formed high-temperature oxidation film, consisting of an inner layer of Fe(3)O(4), and an outer, passive layer of Fe(2)O(3). In the control column pre-treated with Millipore water, the passive Fe(2)O(3) layer was removed upon contact with the water in a manner consistent with an autoreduction reaction. In the TCE+nitrate column and the direct nitrate saturation column, nitrate interfered with the removal of the passive layer and maintained conditions such that high valency protective corrosion species, including Fe(2)O(3) and FeOOH, were stable at the iron surface. The lack of TCE reduction is explained by the presence of these species, as they inhibit both mechanisms proposed for TCE reduction by iron, including catalytic hydrogenation, and direct electron transfer.     

The Application of the Karl Fischer Oven for the Determination of Water in Consumer Products

Abstract

The direct Karl Fischer (KF) titration method has known interferences for measuring water content. In addition, in analyzing some paints, KF can fail to produce an accurate analysis. The California Air Resources Board (GARB) staff has developed a KF procedure that can be used to determine the water content of consumer products. The procedure uses an oven accessory to the titration system, and is based on a distillation method developed by the California Polytechnical University at San Luis Obispo (Cal Poly). Samples are diluted in l-methoxy-2-propanol (MPA), and an aliquot is injected into an enclosed oven system, where the MPA/water azeotrope is swept directly into the KF titration vessel. The technique is accurate and precise and, thus far, proves to be a fast and reliable method for analysis.     

Characterization of emissions during the heating of tyre contaminated scrap

In order to characterize the compounds (type and quantities) emitted during melting of organic contaminated scrap and to investigate the mechanism of their formation, an experimental set-up has been designed and built to study precisely the influence of temperature and gas atmosphere in the conditions of an electric arc furnace. These experiments lead to the determination of mass balances (C, H, O, S) and to the quantification of unburnt compounds (tars, carbon monoxide, volatile organic compounds (VOCs), benzene, toluene, ethylbenzene and xylenes (BTEX), polyaromatic compounds (PAHs)). Degradation conditions (gas atmosphere and temperature) corresponding to different areas in the electric furnace have also been investigated. Such experiments lead to a better understanding of degradation mechanisms; this interpretation is not possible from investigations performed in an industrial furnace since there are many uncontrolled parameters (large dispersion of the results).     

Application of photocatalysis as a post treatment method of a heterotrophic-autotrophic denitrification reactor effluent

The aim of this study is the application of photocatalysis as an effective post treatment scheme for the removal of the organic matter and bacteria released by an innovative biological denitrification process referred to as heterotrophic-autotrophic denitrification, which combines heterotrophic and autotrophic denitrification processes. Photocatalytic treatment was applied using TiO2 as a photocatalyst in the loading range of 0.25-2.00 g l(-1) for irradiation periods up to 60 min using a black light fluorescent lamp with an intensity of I(0)=1309 microW cm(-2). The photocatalytic inactivation data were modelled to pseudo first order kinetics as well as by the areal rates to evaluate the photocatalyst loading effect. Chlorination was used as a final disinfection step to attain an overall inactivation of total coliforms as well as to the formation of very low level of trihalomethanes.     

Removal of low concentrations of ammonium and humic acid from simulated groundwater by Vermiculite/Palygorskite mixture

Contaminants in water are classified into different types based on their physical and chemical properties. Thus, more than one type of sorbents may be needed for their removal. In this article, a combination of vermiculite with palygorskite was studied for their simultaneous removal of ammonium and humic acid from simulated groundwater. Batch results showed that the Langmuir model described ammonium adsorption well with an adsorption capacity of 22 mg/g while the humic acid adsorption data fitted to the linear adsorption better, suggesting different removal mechanisms of these two types of contaminants. Kinetic studies showed an instantaneous removal of ammonium and humic acid. A column packed with mixture of equal volumes of vermiculite and palygorskite could treat 100 pore volumes for ammonium removal at an initial concentration of 10 mg/L and 500 pore volumes for humic acid removal at an initial concentration of 20 mg/L before the effluent concentrations exceeded the standard.     

An integrated test strategy for the assessment of anaerobic biodegradability of wastewaters

The anaerobic biodegradability of wastewaters from different chemical plants was determined by an integrated test strategy consisting of an anaerobic toxicity test, a static anaerobic biodegradation test and a continuously operated fixed bed reactor test. This integrated procedure offered a useful tool for screening wastewaters for anaerobic biodegradability. Four different wastewaters were tested for anaerobic toxicity and biodegradability. One wastewater was used in subsequent testing in a fixed bed reactor which aimed to illustrate a potential design of an anaerobic treatment plant.     

Influence of plant growth stage and season on the release of root phenolics by mulberry as related to development of phytoremediation technology

The phenolics released by red mulberry (Morus rubra L.) roots at different growth stages within a season were quantified and the makeup of phenols analyzed by reverse-phase high performance liquid chromatography (RP-HPLC). The data show that total phenols released into the soil solution increased continuously from an early vegetative stage to leaf senescence, indicating their accumulation in the rhizosphere. From the RP-HPLC analysis of the butanol-extractable phenolics at various growth stages, there appears to be a massive release of an assortment of less polar phenolics into the rhizosphere at the end of the season accompanying leaf senescence. The rhizosphere phenolics may create an environment suitable for the biodegradation of recalcitrant environmental pollutants, by selectively fostering the growth of some, while inhibiting the growth of other microbes.     

Engineering risk assessment for emergency disposal projects of sudden water pollution incidents

Without an engineering risk assessment for emergency disposal in response to sudden water pollution incidents, responders are prone to be challenged during emergency decision making. To address this gap, the concept and framework of emergency disposal engineering risks are reported in this paper. The proposed risk index system covers three stages consistent with the progress of an emergency disposal project. Fuzzy fault tree analysis (FFTA), a logical and diagrammatic method, was developed to evaluate the potential failure during the process of emergency disposal. The probability of basic events and their combination, which caused the failure of an emergency disposal project, were calculated based on the case of an emergency disposal project of an aniline pollution incident in the Zhuozhang River, Changzhi, China, in 2014. The critical events that can cause the occurrence of a top event (TE) were identified according to their contribution. Finally, advices on how to take measures using limited resources to prevent the failure of a TE are given according to the quantified results of risk magnitude. The proposed approach could be a potential useful safeguard for the implementation of an emergency disposal project during the process of emergency response.

     

Dynamic Calibration of an Acid Aerosol Analyzer

A method is described for dynamic calibration of an acid aerosol analyzer based on a commercial modification of the Thomas Autometer and manufactured by the Instrument Development Company. This automated instrument removes acid aerosol from an air stream by sonic impaction, and the sulfuric acid collected is determined conductometrically. An all-glass aerosol generator based on the reaction of water vapor with sulfur trioxide vapor released from fuming sulfuric acid was built for the calibration. Air samples were withdrawn for instrument calibration before and after the concentration of the acid aerosol was determined by titration. The apparent particle size as determined by an Andersen sampler ranged from 2.0 microns to less than 0.68 micron and exhibited a sharp peak with mass median diameter at 1.3 microns in the distribution curve. The size of the aerosol, within certain limits, could be controlled by humidity. Data indicated a linear response with an aerosol collection efficiency of 80 percent in the important respirable size range.     

Investigation of the Contamination of Fractured Formations by Non-Newtonian Oil Pollutants

In many practical applications, non-aqueous phase liquid (NAPL) pollutants exhibiting a clearly non-Newtonian rheological behavior (e.g. crude oil, suspensions of engine oils, asphalt, creosote, etc.) may migrate through fractured formations and contaminate aquifers. The present work is the first step toward the development of non-Darcian models concerning the non-linear NAPL flow in single fractures, and detemiination of the coupled effects of non-Newtonian NAPL rheology and flow rate on the transient immiscible displacement of an aqueous phase by a NAPL. Initially, a protocol is developed for the preparation and rheological characterization of synthetic non-Newtonian NAPLs, which are based on waxy oils. Then, an artificial transparent glass-etched single fracture of controlled morphology is fabricated and used for the measurement of the non-linear pressure gradient--superficial velocity relationship for the flow of NAPL of varying rheology. Pore network simulations and effective medium approximation (EMA) are used for the interpretation of the experimental results and derivation of an analytic non-Darcian one-phase flow model. Visualization experiments of the immiscible displacement of an aqueous phase by Newtonian and non-Newtonian NAPLs are performed on the artificial fracture under controlled values of the viscosity ratio and capillary number (ratio of viscous to capillary forces). Comparative study of the Newtonian and non-Newtonian NAPL flow patterns allows us to evaluate the interactive effects of NAPL rheology, flow rates and fracture morphology on the spatial and temporal distribution of such liquid pollutants within single fractures     

Light scattering characteristics of aerosols as a function of relative humidity: Part I--A comparison of measured scattering and aerosol concentrations using the theoretical models

The Southeastern Aerosol and Visibility Study (SEAVS) was undertaken to characterize the size-dependent composition, thermodynamic properties, and optical characteristics of the ambient atmospheric particles in the southeastern United States. The field portion of the study was carried out from July 15 to August 25, 1995. As part of the study a relative humidity controlled inlet was built to raise or lower the relative humidity to predetermined levels before the aerosol was passed into an integrating nephelometer or particle-sizing device. Five other integrating nephelometers were operated in various configurations, two of which were fitted with a 2.5 microns inlet. Fine particle (< 2.5 microns) samplers were operated to measure concentrations of sulfate, nitrate, and ammonium ions, organic and elemental carbon, and fine soil. Mass size distributions were measured with an eight-stage, single orifice cascade impactor. Four different strategies for estimating scattering were used. First, an externally mixed model with constant specific scattering coefficients, sulfate ion mass interpreted as ammonium bisulfate, and ammonium bisulfate growth as a function of relative humidity, is assumed. Second, an externally mixed aerosol model, assuming constant dry specific scattering but with sulfate ammoniation and associated composition-dependent hygroscopicity explicitly accounted for, is used. Third, an externally mixed aerosol model, but with sulfate ammoniation, associated growth as a function of relative humidity, and sulfate size distributions, is applied. Fourth, an internally mixed aerosol model with measured sulfur size distributions and estimated size distributions for other species is used with the growth characteristics of the mixture being estimated using the Zdanovskii-Stokes-Robinson (ZSR) assumptions. Only ionic species were considered to be hygroscopic. The second, third, and fourth approaches yield similar results with reconstructed scattering comparing quite favorably with measured scattering. Accounting for sulfate ammoniation and associated water uptake was the most important detail in achieving closure between measurements and modeled scattering. In general, differences between estimated scattering, assuming internally or externally mixed models, was small. These same models were used to estimate wet to dry scattering ratios. The R2 for an ordinary least-squares regression between measured and predicted ratios was high (0.71-0.92), and in most cases the scattering ratio was insensitive to modeling assumptions. However, during some sample periods differences between predicted scattering ratios for the different modeling assumptions were as high as 30%.     

Assessment of instream foam formation and quantification of foam in effluents

Although the foam formation on surface waters nowadays is not comparable with the foam “mountains” in the 1970s, it still is an issue of water quality concern. A drawback in the discussion is the lack of methods to assess instream foam formation and foam emitted by point sources. Foam formation on a transboundary river in Austria led to an intensive study resulting in two parameters to quantify instream and emitted foam. Foam potential is introduced as emission parameter that is defined as flow rate of river water, which can foam due to an effluent’s discharge. The foam index (FI) represents a parameter to assess the foam on the river and allows a semi-quantitative differentiation between the varying foaming conditions. This publication will present the developed methods and show some results to prove their accuracy and applicability.     

A model of oscillatory transport in granular soils, with application to barometric pumping and earth tides

A simple algebraic model is proposed to estimate the transport of a volatile or soluble chemical caused by oscillatory flow of fluid in a porous medium. The model is applied to the barometric pumping of vapors in the vadose zone, and to the transport of dissolved species by earth tides in an aquifer. In the model, the fluid moves sinusoidally with time in the porosity of the soil. The chemical concentration in the mobile fluid is considered to equilibrate with the concentration in the surrounding matrix according to a characteristic time governed by diffusion, sorption, or other rate processes. The model provides a closed form solution, to which barometric pressure data are applied in an example of pore gas motion in the vadose zone. The model predicts that the additional diffusivity due barometric pumping in an unfractured vadose zone would be comparable to the diffusivity in stagnant pore gas if the equilibration time is 1 day or longer. Water motion due to the M2 lunar tide is examined as an example of oscillatory transport in an aquifer. It is shown that the tidal motion of the water in an aquifer might significantly increase the vertical diffusivity of dissolved species when compared to diffusion in an absolutely stagnant aquifer, but the hydrodynamic dispersivity due to tidal motion or gravitational flow would probably exceed the diffusivity due to oscillatory advection.     

Spatial variations of ground level ozone concentrations in areas of different scales

The spatial variation of ground level ozone concentrations was investigated for areas of three different scales: (1) an air quality management district (a region about 100×70 km²) in northern Taiwan, (2) the neighborhood (about 2 km in radius) of an air quality monitoring station, and (3) an open field (about 400×600 m²) surrounded by 3- and 4-story buildings in an elementary school. Analysis of data on hourly ozone concentration, obtained at 13 m above the ground at 21 monitoring stations in the air quality management district, showed that the stations downwind of the urban center in the district had significantly higher ozone concentrations. Measurements for 8-h average ozone concentrations at 1.5 m above the ground by passive samplers showed that, in a flat area about 2 km in radius, the ratios of the ozone concentration at open areas to that at the monitoring station (0.86–0.93) were significantly higher than those obtained at areas with higher traffic flow and density of buildings (0.60–0.68). For the open field in an elementary school, the 8-h average ozone concentrations at 1.5 m above the ground at sites less than 10 m from the nearest building were considerably lower than those at sites farther away from buildings. The results indicated that, in areas of small scales, the spatial distributions of ozone concentration were highly non-uniform and there were appreciable day-to-day variability in spatial distribution. Such variability should be taken into account in determining the extent to which an individual is exposed to ozone.     

Use and environmental implications of pulp-mill sludge as an organic fertilizer

Pulp-mill sludge is an industrial by-product with a high level of organic matter, which is eventually biodegradable. Since there are few alternatives for its practical use, its utilization as an agricultural fertilizer is proposed. An experiment was carried out during 2 years, with yellow lupin plants (Lupinus luteus L.), in order to define the critical application levels of this material. Biodegradability of the sludge in the soil was also evaluated, as well as its pollutant effects. Results obtained in the first year of the experiment showed that an application rate larger than 50 t ha(-1) of pulp-mill sludge, has a depressive effect on yield. Yet, this effect is completely dissipated in the second year. Finally, it is concluded that, if the use of this organic waste as an agricultural fertilizer is adequately monitored, soil pollution problems should not occur.     

Waterborne agrichemicals compromise the anti-predatory behavior of zebrafish

Environmental Science and Pollution Research - Due to human activities, there is an increasing presence of agrochemicals residues in water bodies, which could be attributed to an increased use of...