The Politics of Waste Incineration in Beijing: The Limits of a Top-Down Approach?

The siting of waste incinerators is often a highly contentious issue. Although most studies have focused on Western countries, municipal solid waste management has become an extremely pressing issue in China. Incineration is being strongly promoted by government officials, yet this has resulted in strong societal opposition. Through documentary analysis and in-depth stakeholder interviews, this article analyses three anti-incineration campaigns in Beijing, focusing on outcomes and campaigner strategies. Anti-incineration campaigns have partly undermined the government's top-down, non-consultative approach to waste management. In developing an ‘expert strategy’, campaigners have exploited government weakness whilst depoliticizing the issue. Yet rather than lead to a more open and consultative incineration policy, it is more likely that officials will circumvent unrest through increasing opacity and by choosing sites in locations where opposition is less likely to emerge.     

Modes of governing Canadian waste management: a case study of Metro Vancouver’s energy-from-waste controversy

Managing municipal solid waste is a pressing environmental and political concern for Canadian municipalities who bear the primary responsibility for waste management (WM). In 2015, Metro Vancouver’s (MV’s) plans to expand their capacity to expand their WM capacity with energy-from-waste technology was abandoned, despite shrinking landfill space and persistent public opposition to new landfills. Using Bulkeley et al.’s [(2005). Governing municipal waste: towards a new analytical framework. Journal of Environmental Policy and Planning, 7(1), 1–23. doi:10.1080/15239080500251700] ‘modes of governing framework’, we analyse MV’s failed attempt to expand their energy-from-waste capacity to better understand the challenges associated with governing WM in Canada. We argue that a history of downloading responsibility for WM to municipalities, regional districts, and industry has fragmented WM governance, posing a challenge for developing new waste infrastructure. We find that this localization of responsibility is incompatible with contemporary WM challenges. The scalar mismatch between waste’s material impacts and the scale at which waste is managed has resulted in co-dependence and conflict between putatively independent municipalities, regional districts, and private companies. This inhibits higher-level WM coordination while the autonomy of individual municipalities is simultaneously undermined.     

Barriers and enablers of local adaptive measures: a case study of Bengaluru’s informal settlement dwellers

ABSTRACT

Cities, with their increasing populations, are host to a range of issues including non-climatic factors due to the prevailing development paradigm, discriminatory urbanisation patterns, and weak governance structures. Climate change poses an additional challenge and exacerbates existing vulnerabilities affecting cities and its people, especially the urban poor. This paper highlights the barriers and enablers to climate change-related adaptation experienced in some of Bengaluru’s informal settlements. The barriers described in the paper include economic, social, governance and information related issues that impede local actions and increase vulnerabilities. Enabling factors such as improving social and human capital, gaining formal recognition and most importantly support from agencies (e.g. local government, civil societies, and community leaders), help overcome some of the barriers or challenges. Hence, local level adaptation measures mainstreamed with local developmental agendas help address some of the structural causes of vulnerability. Contextual policies and interventions can facilitate successful local level adaptation measures.     

Cloning and expression of α-amylase in E. coli: genesis of a superior biocatalyst for substrate-specific MFC

One of the most practical approaches for establishing a successful microbial fuel cell (MFC) is to fasten the oxidation rate of the substrate by the microorganisms to get quick paced electron transfer between microbes and electrode. A genetically modified Escherichiacoli, overexpressing α-amylase, is constructed and applied as biocatalyst in MFC using starch as substrate. The results are compared with nonrecombinant, native E.coli. The results show better performance for the MFC containing the recombinant strain demonstrated by higher power density (PD), lower resistance, and significant electrochemical activity. Maximum PD has been recorded as 279.04 mW m^?2 compared to 120.33 Mw m^?2 for the MFC operated with nonrecombinant E.coli. The impedance results also suggest the effectiveness of the recombinant strain by lowering the internal resistance by more than half order as compared to the nonrecombinant one. These results affirm that the engineered strain can be used as a superior biocatalyst in contrast to the native strain and by using the technique of genetic alteration; gene of interest can be inserted based on the substrate to be treated. So, this work gives a useful insight for accomplishing successful MFC operation with the use of bacterial stains engineered at the molecular level.     

Avança Brasil: Environmental and Social Consequences of Brazil's Planned Infrastructure in Amazonia

“Avança Brasil” (Forward Brazil) is a package of 338 projects throughout Brazil; the portion of the plan to be carried out in Brazil's Legal Amazon region totals US$43 billion over 8 years, US$20 billion of which would be for infrastructure causing environmental damage. Brazil's environmental impact assessment system is not yet capable of coping with the challenge presented by Avança Brasil. Generic problems with the licensing process include stimulation of a lobby in favor of construction before decisions are made on the advisability of the projects, the “dragging effect” of third parties, whereby economic activity is attracted to the infrastructure but escapes the environmental impact assessment system, a tendency for consulting firms to produce favorable reports, a bureaucratic emphasis on the existence of steps without regard to the content of what is said, and the inability to take account of the chain of events unleashed when a given project is undertaken.The environmental and social costs of forest loss are high; among them is loss of opportunities for sustainable use of the forest, including loss of environmental services such as biodiversity maintenance, water cycling, and carbon storage. The benefits of export infrastructure are meager, especially from the point of view of generating employment. Much of the transportation infrastructure is for soybeans, while the hydroelectric dams contribute to processing aluminum. The example of Avança Brasil makes clear the need to rethink how major development decisions are made and to reconsider a number of the plan's component projects.     

Collective Action in the Management of a Tropical Dry Forest Ecosystem: Effects of Mexico’s Property Rights Regime

Dilemmas of natural resources governance have been a central concern for scholars, policy makers, and users. Major debates occur over the implications of property rights for common resources management. After the Mexican Revolution (1910–1917), land was distributed mainly as ejidos conceived as a hereditary but unalienable collective form of property. In 1992, a new Agrarian Law was decreed that allows individual ownership by removing various restrictions over the transfer of land. Scholars have examined the reform mainly focusing on land-tenure changes and environmental fragmentation. This study examines how the new ownership regime is affecting collective decision-making in ejidos located in a tropical dry forest (TDF) ecosystem. Information on decision-making processes before and after the 1992 reform was gathered through 52 interviews conducted in four ejidos selected along a gradient including agricultural, cattle-raising, and TDF use. The new individualized land property system reduced collective action in ejidos but did not trigger it. Collective action responses to the 1992 reform were buffered by self-organization each ejido already had. Heterogeneous users who shared a short history and showed little understanding of TDF and low dependence on its resources seemed to explain why ejidos have not been able to share a sense of community that would shape the construction of institutions for the collective management of forest resources. However, when a resource is scarce and highly valuable such as water the same users showed capacities for undertaking costly co-operative activities.     

Evaluating the efficacy of adaptive management approaches: Is there a formula for success?

Within the field of natural-resources management, the application of adaptive management is appropriate for complex problems high in uncertainty. Adaptive management is becoming an increasingly popular management-decision tool within the scientific community and has developed into two primary schools of thought: the Resilience-Experimentalist School (with high emphasis on stakeholder involvement, resilience, and highly complex models) and the Decision-Theoretic School (which results in relatively simple models through emphasizing stakeholder involvement for identifying management objectives). Because of these differences, adaptive management plans implemented under each of these schools may yield varying levels of success. We evaluated peer-reviewed literature focused on incorporation of adaptive management to identify components of successful adaptive management plans. Our evaluation included adaptive management elements such as stakeholder involvement, definitions of management objectives and actions, use and complexity of predictive models, and the sequence in which these elements were applied. We also defined a scale of degrees of success to make comparisons between the two adaptive management schools of thought. Our results include the relationship between the adaptive management process documented in the reviewed literature and our defined continuum of successful outcomes. Our data suggest an increase in the number of published articles with substantive discussion of adaptive management from 2000 to 2009 at a mean rate of annual change of 0.92 (r2 = 0.56). Additionally, our examination of data for temporal patterns related to each school resulted in an increase in acknowledgement of the Decision-Theoretic School of thought at a mean annual rate of change of 0.02 (r2 = 0.6679) and a stable acknowledgement for the Resilience-Experimentalist School of thought (r2 = 0.0042; slope = 0.0013). Identifying the elements of successful adaptive management will be advantageous to natural-resources managers considering adaptive management as a decision tool.     

Is the convenience yield a good indicator of a commodity's supply risk?

A strong increase in the demand for some commodities over the last decade will have a major impact on their future supply situation. Of increasing importance, therefore, is an assessment of a commodity's criticality, and especially its supply risk, by appropriate indicators. The literature has proposed numerous indicators of the supply risk. Here, we use the convenience yield of commodity futures as a supply risk indicator to address some of the major shortcomings of existing indicators, especially regarding their predictive power. This paper aims to test the applicability of the convenience yield as an indicator of a commodity's future supply risk. Therefore, we calculate historical convenience yields for 3-, 15-, and 27-month futures contracts for five major industrial metals (aluminum, copper, lead, nickel, and zinc) during the period 1999 to 2011. We compare the convenience yields at the beginning of the contract period to known indicators at maturity to find that the convenience yield has generally predictive power for the static stock lifetime (i.e., inventory volume/turnover) and future spot prices. Furthermore, we find that, with some restrictions, the convenience yield is an applicable indicator of a commodity's supply risk.     

Possible Input of Nitrogen of Visitors’ Origin on a Protected Peatland

The Ozegahara peatland, in the Nikko-Oze National Park in Japan, is ecologically significant because of its oligotrophic environment; it is one of the most strictly preserved areas in the country. The isotope ratio of nitrogen (¹⁵N/¹⁴N) and carbon (¹³C/¹²C) and C/N ratio of peat moss (Sphagnum spp.) and sundew (Drosera rotundifolia) in the peatland were analyzed. The correlation of the isotope ratio with some parameters (sundew population density, number of trapped insects, water level, bog myrtle coverage, and visitor density) was investigated. The nitrogen isotope ratio of sundew showed the most significant covariation with visitor density, where sundew from lunch areas or along busy walkways showed a higher nitrogen isotope ratio. The nitrogen isotope ratio of peat moss covaried, not only with route traffic frequency but also with water level, bog myrtle coverage, and number of trapped insects by sundew, indicating that factors other than the visitor level influence the local nitrogen cycle. This study suggests that the nitrogen imported into the peatland by visitors is a principal factor to be monitored for the maintenance of the natural environment.     

Policy context as a factor of bias in the valuation of environmental goods – a dual-process theories perspective

When ecosystem services value estimates are applied in the economic assessment of environmental policies, high accuracy of these estimates is required. One of the directions in the scientific discussion on biases in stated preference (SP) valuation surveys builds on dual-process theories of judgment. The paper contributes to this literature by presenting an experiment where two types of judgment were induced via separate versus joint valuation of environmental goods. The results demonstrated that policy relevance of environmental issues, e.g. the need for conservation measures increases emotional response, causing a larger bias in the separate design as it involves ‘valuation by feeling.’ This finding suggests that the context of a specific policy, which is often the reason for conducting SP surveys, influences the answers, thereby making the results less reliable for use in cost–benefit analysis.     

Calibrating a model to 30 years of data to capture the accumulation of chloride from winter deicers in a shallow aquifer

Winter deicers are a major source of chloride contamination to shallow aquifers in northern latitudes. In the greater Chicago area of northeast Illinois, chloride has been accumulating for decades and in many places now exceeds the United States Environmental Protection Agency secondary standard of 250 mg/L. MODFLOW-NWT and MT3D-USGS were used to simulate the accumulation of chloride with 30 years of data in the shallow aquifer of Will County in northeast Illinois. This aquifer is composed of unconsolidated sediments, largely from glacial deposits, overlying a fractured dolomite bedrock. To calibrate to observed heads and chloride, the model needed refined geologic features, higher chloride concentrations on cells representing commercial or industrial lands, lower chloride concentrations on cells representing roads, and point source areas to speed chloride's emergence in the aquifer. These point sources are locally significant and could represent different anthropogenic or geologic features, such as municipal stormwater infrastructure. Future simulations indicate that chloride is not at steady state in the shallow aquifer and wells are at risk of exceeding the secondary standard if winter deicing applications are not reduced. It may take decades for the full impacts of reduced deicing rates to be observed in wells, owing to the long residence time of water in the aquifer. This transient model calibration was possible because of the 30-year dataset collected by communities and government agencies.     

Abatement cost curves: a viable management tool for enabling the achievement of win-win waste reduction strategies?

Environmental regulation of industrial activity is generally believed to have a negative impact on the industry. Recent literature has suggested, however, that reducing industrial waste outputs can, in some circumstances, result in a 'win-win', or at least 'win-draw', scenario for industry and the environment. The viability of using the abatement cost curve method as a management tool to enable the achievement of a 'win-win' state is investigated here. Copper pollution in the Humber Estuary is used as a case-study, and the abatement cost curve methodology proves to be a valuable tool in identifying barriers to achieving the win-win state, and also in providing future direction for the waste management strategy. Abatement cost curves are concluded to be powerful management tools which greatly improve the transparency of waste reduction information.     

Use of artificial roughness for performance enhancement of solar air heaters—a review

The performance characteristics of a solar air heater can effectively be improved by providing artificial roughness in the form of protrusions and dimples of various shapes, sizes, and orientations on the underside of heated surface. An extensive literature review on artificial roughness elements has been carried and the correlations developed for heat transfer and friction factor for roughened solar air collector have been discussed and presented in this paper. The performance parameter has also been computed and compared with various kinds and shapes of roughness geometries using correlations developed by various investigators. The optimum values of the roughness parameters obtained by several investigators have also been discussed.     

“Alternative futures”: a methodology for integrated sustainability considerations,the case of Nuremberg West,Germany

In the context of the desire to steer urban transformation towards sustainability transition, the development of proposals for alternative futures assists policy-makers and practitioners in focusing on impact by organising the various drivers, particularly spatial ones that cause an interactive urban system to transit. This paper presents the methodology that has been developed by the Chair for Urban Development, Munich University of Technology (TUM) as it was working within an inter-disciplinary research team on a project commissioned by the municipality of Nuremberg. The objective of this project was to develop ideas for regenerating the formerly industrial area of Nuremberg West (NW) under the guiding theme of sustainable urban development. This methodology focuses on the development of proposals of positive and possible transformations of NW in the year 2050 based on the analysis of economy, housing and space at various scales and a systematic assessment of trends. These alternative futures became framing and guiding narratives to internalise and anchor the debate in-between the various disciplines involved in this project.     

A multi-criteria decision analysis of solid waste treatment options in Pakistan: Lahore City—a case in point

Population of the world is increasing day by day, resulting in enormous amount of waste production. In the modern age of great technological advancements, there needs to be a systematic method to keep the environment clean. The waste management activities, i.e., collection, transport and disposal, pose a great challenge to the waste managers as they have to factor in various eclectic factors such as land availability, facilities available, budget, time required and the impact it would have on the environment, while tackling this problem. Lahore, despite being the most developed city of Pakistan, does not have a suitable solid waste management system. An increasing population leads to more waste generation, and in Lahore the situation is no different. Several waste management companies are working in the city, but as of yet they have not been able to make significant inroads to completely eradicate the problem. The aim of this paper is to suggest a suitable way for dealing with the waste. To accomplish this aim, a hierarchy-based model is used, considering six criteria and five alternatives. We used multi-criteria decision analysis to decide among different waste management alternatives. Forecasting has been used to find the population and waste produced over the years. Analytical hierarchy process (AHP) and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) are used to rank the feasible alternative. The results show that the population and waste were increasing drastically. Aerobic digestion was ranked as the best alternative for waste management according to AHP and TOPSIS, but there is great variation among the rank of other alternatives.     

(Why) did Desertec fail? An interim analysis of a large-scale renewable energy infrastructure project from a Social Studies of Technology perspective

ABSTRACT

In 2009 the Desertec Industrial Initiative (DII) was founded by several, predominant German enterprises. The objective of DII was to organise the conditions for the realisation of the Desertec idea, which aimed to both (a) supply Europe, in a large-scale manner, with electricity produced in solar power plants in North Africa and the Arabic peninsula and (b) contribute to the self-supply of the Middle East North Africa region (MENA). Protagonists of the desert energy idea saw this megatechnic project as a starting point for a new trans-Mediterranean EU-MENA union, critics in contrast as a neo-colonial project. Disputes over the adequate interpretation and implementation of the Desertec idea broke out from the beginning. In 2014/2015, the media talked of the failure of DII and of the Desertec concept. The majority of the members left DII at the end of 2014. On the other hand, in some MENA countries renewables are playing a crucial role in securing the future of the energy sector. This paper analyses the development of DII and the Desertec idea by using concepts from Social Studies in Technology, and especially by the multi-level perspective approach in Transition Studies. It shows how the interplay of different factors, such as technological developments, entrepreneurial performances and political processes, lead to internal conflicts and the non-realisation – up to now – of related large-scale energy projects. As an important aspect of the paper, different understandings of the future of our energy supply and of North–South relations are presented in detail.     

Impact of unconfined sulphur-mine waste on a semi-arid environment (Almería, SE Spain)

Thirty-five soil samples were taken from unconfined mine waste, stream sediments, and surfaces unoccupied by mining and presumably unaffected by it, in a sulphur-mining zone surrounded by carbonate material and characterized by a semi-arid climate with short torrential storms. These samples were analysed and the results compared to estimate the spread of pollution in the landscape and to assess potential environmental risk. The mean concentrations of S, Zn, Cd, Pb, and As in mine waste were between 3.5-fold (As) and 50-fold (S) greater than unaffected soils. Oxidation of S led to a sharp drop in pH, strong weathering of minerals, and solubilisation of the constituent elements, forming a toxic acidic mine drainage with highly concentrated pollutants that were discharged into the drainage channels. Successive acid mine drainage into the soil on the valley floor spreads acidification and pollution downstream. The high carbonate content in surrounding soils played an important role in the increase of the pH and precipitation of S, Pb, and Al of the affected soils. Meanwhile, high mobility of Zn, Cd and As under basic conditions and a low Fe concentration explain the broad spread of these elements, as high concentrations were detected in soil more than 2000 m from the source. Only the soil solutions from near the waste dump (first 500 m) were highly phytotoxic, and moderately phytotoxic from 500 to 1500 m away. The concentration of pollutants in the leachates was clearly higher than in soil solutions, even in the soils located over 2000 m from the source, implying that the size of the polluted area will increase with time.     

Can ISO 14063 be a tool to plan the environmental communication strategy of a territorial area?

Over the past two decades, communication on environmental values, actions and performance has become an essential activity of organisations, because of the increased public concern and legislation related to the environment.

Stakeholders put pressure on companies to take environmental responsibility. In this framework, an effective environmental communication can generate value-added on companies' environmental work, and consequently, their competitiveness and profitability can benefit from communicating their environmental responsibility.

In 2006, the International Organization for Standardization (ISO) launched a standard for environmental communication, ISO 14063. ISO 14063 should not be used for third-party certification purposes. Instead, it is intended to be used as a guideline and support companies to ensure successful environmental communication. The aim of this paper is to prompt a discussion about the applicability of the standard ISO 14063 not only to single organisations but as a tool to plan the environmental communication strategy of a whole territorial area. This is achieved by performing a case study relating to the Interreg IVC-funded project “Progresland”. The project involved three Italian and one Spanish natural areas and demonstrated that ISO 14063 could be a valid support to define and implement an environmental communication plan for a territorial area.     

The Design of a New Energy-conservation Type Solar-powered Lighting System Using a High‐pressure Sodium Lamp

This study designs and applies a new energy-conservation type solar-powered lighting system using a high-pressure sodium lamp to areas not having any utility company's electricity. The proposed system uses a zero-voltage-switching (ZVS) DC/DC converter in the batteries’ charge circuit to reduce the switching loss for a higher charging efficiency. Said system also adopts the maximum power point tracking (MPPT) technique to maximize the solar panels’ photovoltaic conversion capability. When dark, the batteries in the proposed system will discharge, with a raised voltage, through a push-pull DC/DC converter; said voltage, as the input voltage of the series-parallel resonant inverter, will be regulated to dim the lamp. To enable the efficient usage of the batteries’ stored energy capacity, this control scheme of the proposed system may adjust the night-time discharge time lengths, according to season difference, and compute the usable capacity for the load, according to the batteries’ charged voltage, so as to select a suitable pre-scheduled light-dimming curve for the lamp to achieve energy conservation for the batteries and continuity in lighting when dark.