Influence of industrial heavy metal pollution on soil free-living nematode population

The effect of distance from a heavy metal pollution source on the soil nematode community (trophic structure, sex structure, and taxa composition) was investigated along a 15-km transect originating at the Almalyk Industrial Complex, Uzbekistan (pollution source). The soil nematode community was exposed to heavy metal influence both directly and through soil properties changes. Pollution effect on the density and biomass of soil free-living nematodes was found to be highest at pollution source, with fungivores and plant parasites dominating at the upper and deeper soil layers next to the pollution source. These groups decreased along the transect, yielding domination to bacteria- and fungi-feeders. The sex ratio of nematode communities was found to be dependent on heavy metal pollution levels, with the juveniles being the most sensitive nematode group. The Maturity and modified Maturity Indices, reflecting the degree of disturbance of the soil ecosystem, were found to be the most sensitive indices.     

Microbial indicators of heavy metal contamination in urban and rural soils

Urban soils and especially their microbiology have been a neglected area of study. In this paper, we report on microbial properties of urban soils compared to rural soils of similar lithogenic origin in the vicinity of Aberdeen city. Significant differences in basal respiration rates, microbial biomass and ecophysiological parameters were found in urban soils compared to rural soils. Analysis of community level physiological profiles (CLPP) of micro-organisms showed they consumed C sources faster in urban soils to maintain the same level activity as those in rural soils. Cu, Pb, Zn and Ni were the principal elements that had accumulated in urban soils compared with their rural counterparts with Pb being the most significant metal to distinguish urban soils from rural soils. Sequential extraction showed the final residue after extraction was normally the highest proportion except for Pb, for which the hydroxylamine-hydrochloride extractable Pb was the largest part. Acetic acid extractable fraction of Cd, Cu, Ni, Pb and Zn were higher in urban soils and aqua regia extractable fraction were lower suggesting an elevated availability of heavy metals in urban soils. Correlation analyses between different microbial indicators (basal respiration, biomass-C, and sole C source tests) and heavy metal fractions indicated that basal respiration was negatively correlated with soil Cd, Cu, Ni and Zn inputs while soil microbial biomass was only significantly correlated with Pb. However, both exchangeable and iron- and manganese-bound Ni fractions were mostly responsible for shift of the soil microbial community level physiological profiles (sole C source tests). These data suggest soil microbial indicators can be useful indicators of pollutant heavy metal stress on the health of urban soils.     

Response of microbial activities to heavy metals in a neutral loamy soil treated with biosolid

Application of biosolid on land has been widespread in numerous countries for last several decades. This study performed incubation experiments by mixing a neutral loamy soil and biosolid enriched in Cu, Pb and Zn to explore how heavy metal affects soil mineralization and microbial biomass. The experimental results indicated that large nutrient, microorganism and C sources from biosolid were beneficial to microbial respiration. However, compared to the biosolid alone treatment, the supplemented Cu, Pb and Zn in biosolid reduced the mineralized C by roughly 36%. This phenomenon was probably caused by a portion of the Cu, Pb and Zn being complexed with organic matter to prevent decomposition of organic carbon by microorganisms. Equally, soil treated with biosolid increased the quantity of mineralized N by approximately five-fold and accelerated the rate of N mineralization by about one-fold compared to untreated soil. Notably, addition of heavy metals impaired the mineralization process, particularly when Pb reached about 64%. The reduced N mineralization occurred for similar reasons to the microbial respiration. The addition of biosolid in soil considerably increased the amount of mineralizable N; however, the increase was lower in biosolid-treated soil spiked by heavy metals. The addition of heavy metals in the soil-biosolid mixture clearly reduced the microbial biomasses C (MBC) and N (MBN), indicating that the microbial activities had been disrupted by the heavy metals. The microbial biomass C/N ratio had changed initially from 8 to 13 at the end of incubation period, owing to various groups of microbes expressing different mechanisms of metabolism, indicating that the microbial population had changed from bacteria to fungi, which had higher metal tolerance.     

Effects of lead and cadmium nitrate on biomass and substrate utilization pattern of soil microbial communities

A study was conducted to evaluate the effects of different concentrations of lead (Pb) and cadmium (Cd) applied as their nitrates on soil microbial biomass carbon (C(mic)) and nitrogen (N(mic)), and substrate utilization pattern of soil microbial communities. The C(mic) and N(mic) contents were determined at 0, 14, 28, 42 and 56 days after heavy metal application (DAA). The results showed a significant decline in the C(mic) for all Pb and Cd amended soils from the start to 28 DAA. From 28 to 56 DAA, C(mic) contents changed non-significantly for all other treatments except for 600 mgkg(-1) Pb and 100 mgkg(-1) Cd in which it declined significantly from 42 to 56 DAA. The N(mic) contents also decreased significantly from start to 28 DAA for all other Pb and Cd treatments except for 200 mgkg(-1) Pb which did not show significant difference from the control. Control and 200 mgkg(-1) Pb had significantly lower soil microbial biomass C:N ratio as compared with other Pb treatments from 14 to 42 DAA, however at 56 DAA, only 1000 mgkg(-1) Pb showed significantly higher C:N ratio compared with other treatments. No significant difference in C:N ratio for all Cd treated soils was seen from start to 28 DAA, however from 42 to 56 DAA, 100 mgkg(-1) Pb showed significantly higher C:N ratio compared with other treatments. On 56 DAA, substrate utilization pattern of soil microbial communities was determined by inoculating Biolog ECO plates. The results indicated that Pb and Cd addition inhibited the functional activity of soil microbial communities as indicated by the intensity of average well color development (AWCD) during 168 h of incubation. Multivariate analysis of sole carbon source utilization pattern demonstrated that higher levels of heavy metal application had significantly affected soil microbial community structure.     

Effects of sulfonamide and tetracycline antibiotics on soil microbial activity and microbial biomass

Increasingly often soil residual concentrations of pharmaceutical antibiotics are detected, while their ecotoxic relevance is scarcely known. Thus, dose related effects of two antibiotics, sulfapyridine and oxytetracycline, on microorganisms of two different topsoils were investigated. The fumigation-extracted microbial C (E(C)) and ergosterol were determined to indicate soil microbial and fungal biomass, respectively. Microbial activity was tested as basal respiration (BR), dehydrogenase activity (DHA), substrate-induced respiration (SIR), and Fe(III) reduction. The BR and DHA were uninfluenced even at antibiotic concentrations of 1000 microg g(-1). This revealed that an activation of microbial growth through nutrient substrate addition is required to test possible effects of the bacteriostatic antibiotics. In addition, the effects of both antibiotics were time dependent, showing that short-term tests were not suitable. Clear dose-response relations were determined with SIR when the short-term incubation of 4h was extended into the growth phase of the microorganisms (24 and 48 h). The Fe(III) reduction test, with a 7-d incubation, was also found to be suitable for toxicity testing of antibiotics in soils. Effective doses inhibiting the microbial activity by 10% (ED(10)) ranged from total antibiotic concentrations of 0.003-7.35 microg g(-1), depending on the antibiotic compound and its soil adsorption. Effective solution concentrations (EC(10)), calculated from distribution coefficients, ranged from 0.2 to 160 ng g(-1). The antibiotics significantly (p<0.05) reduced numbers of soil bacteria, resulting in dose related shifts in the fungal:bacterial ratio, which increased during 14 d, as determined from analysis of ergosterol and E(C). It was concluded that pharmaceutical antibiotics can exert a temporary selective pressure on soil microorganisms even at environmentally relevant concentrations.     

Bioindication of air pollution effects near a copper smelter in Brazil using mango trees and soil microbiological properties

A field study near the copper smelter of a large industrial complex examined air pollution effects on vegetation and soil parameters in Cama?ari (northeast Brazil). Close to the smelter, soil pH-value was lower and total acidity as well as organic carbon contents were higher compared with a site far from the source and two reference sites. The acidification of top soil particularly and the drastically enhanced plant-available copper concentrations were caused by atmospheric deposition. High sulphur and copper deposition significantly reduced microbial biomass and altered functional diversity of soil microorganisms (arylsulphatase and xylanase). Large accumulations of sulphur, arsenic and copper were detected in mango leaves (Mangifera indica) growing downwind from the smelter suggesting potential food chain-mediated risk.     

Effect of tetraconazole application on the soil microbial community

Tetraconazole is one of the most commonly used triazole fungicides in agricultural practice, and its continuous application poses a potential risk for non-target soil microorganisms. Therefore, the objective of this study was to evaluate the effect of tetraconazole at the field rate (T1, 0.33 mgkg^?1 of soil), three times the field rate (T3, 1.00 mgkg^?1 of soil) and 10 times the field rate (T10, 3.33 mgkg^?1 of soil) on the soil microorganisms. To ascertain this effect, the tetraconazole concentration and the microbial properties with potential as bioindicators of soil health (i.e. microbial biomass C, basal respiration, substrate-induced respiration, structure diversity and functional community profiling) were determined. The results showed that the degradation half-lives of tetraconazole varied from 69 to 87 days, depending on the three application concentrations. The microbial biomass C, basal respiration and substrate-induced respiration were inhibited, but they tended to recover at the end of the incubation when tetraconazole was applied at the recommended field rate. The ratios of the gram-negative to gram-positive (GN to GP) bacteria decreased, and the fungi to bacteria ratio increased after a temporal decrease on the seventh day. A principal component analysis of the PLFAs showed that tetraconazole application significantly shifted the microbial community structure on day 7. Different functional community profiles were observed, depending on the tetraconazole application rates. It was concluded that tetraconazole application decreases the soil microbial biomass and activity and changes the structures of the soil microbial community.     

Direct and indirect effects of metal contamination on soil biota in a Zn-Pb post-mining and smelting area (S Poland)

Effects of metal contamination on soil biota activity were investigated at 43 sites in 5 different habitats (defined by substratum and vegetation type) in a post-mining area. Sites were characterised in terms of soil pH and texture, nutrient status, total and exchangeable metal concentrations, as well as plant species richness and cover, abundances of enchytraeids, nematodes and tardigrades, and microbial respiration and biomass. The concentrations of total trace metals were highest in soils developed on mining waste (metal-rich dolomite), but these habitats were more attractive than sandy sites for plants and soil biota because of their higher content of organic matter, clay and nutrients. Soil mesofauna and microbes were strongly dependent on natural habitat properties. Pollution (exchangeable Zn and Cd) negatively affected only enchytraeid density; due to a positive relationship between enchytraeids and microbes it indirectly reduced microbial activity.     

Comparison of microbial indicators under two water regimes in a soil amended with combined paper mill sludge and decomposed cow manure

An incubation study was conducted under laboratory conditions to compare the effects of soil amendment of combined paper mill sludge (PS) and decomposed cow manure (DCM) on selected microbial indicators. A lateritic soil (Typic Haplustalf) was amended with 0 (control), 20 or 80tha(-1) (wet weight) of PS or DCM. The amended soils were then adjusted to 60% water holding capacity (WHC) or submerged conditions, and incubated at 27 degrees C in dark for up to 120days (d). The microbial biomass C (MBC), the basal soil respiration and the enzyme activities of the beta-glucosidase, acid phosphatase and sulphatase were analyzed at day 15, 30, 45, 60 and 120. Compared to the unamended soil (control), the MBC, the basal soil respiration and the enzyme activities increased with the rate of PS and DCM. At similar rate, the DCM treatment increased significantly the MBC, the soil respiration and the enzyme activities compared to the PS treatment. Also, the water regimes affected the microbial activities. At 60% WHC, the MBC and soil respiration increased during the first 30d and decreased thereafter. The enzyme activities showed similar trends, where they increased for the first 60d, and decreased thereafter. In contrast, under submerged condition, the MBC and enzymes activities declined during 120d, whereas the soil respiration increased. Compared to the control, the used of PS and DCM had no negative impact of the soil microbial parameters, even at the highest application rate. Long-term field experiments are required to confirm these laboratory results.     

In situ fixation of metals in soils using bauxite residue: biological effects

Soils polluted with heavy metals can cause phytotoxicity and exhibit impared microbial activities. In this paper we evaluate the responses of different biological endpoints to in situ remediation processes. Three soil amendments (red mud, beringite and lime) were applied to two soils polluted by heavy metals. Oilseed rape, wheat, pea and lettuce were grown successively in pots on the untreated and amended soils and their yield and metal uptake were determined. A suite of microbial tests (lux-marked biosensors, Biolog and soil microbial biomass) were performed to determine the effect of the soil amendments on the functionality and size of the soil microbial community. In both soils all three amendments reduced phytotoxicity of heavy metals, enhanced plant yields and decreased the metal concentrations in plants. The red mud treatment also increased soil microbial biomass significantly. The microbial biosensors responded positively to the remediation treatments in the industrially-contaminated soil used in the experiment. Red mud applied at 2% of soil weight was as effective as beringite applied at 5%. The results also showed that since the biological systems tested respond differently to the alleviation of metal toxicity, a suite of biological assays should be used to assess soil remediation processes.     

Influence of root-exudates concentration on pyrene degradation and soil microbial characteristics in pyrene contaminated soil

The effect of ryegrass (Lolium perenne L.) root-exudates concentration on pyrene degradation and the microbial ecological characteristics in the pyrene contaminated soil was investigated by simulating a gradually reducing concentration of root exudates with the distance away from root surface in the rhizosphere. Results showed that, after the root-exudates were added 15 d, the pyrene residue in contaminated soil responded nonlinearly in the soils with the same pyrene contaminated level as the added root-exudates concentration increased, which decreased first and increased latter with the increase of the added root-exudates concentration. The lowest pyrene concentration appeared when the root exudates concentration of 32.75 mg kg(-1) total organic carbon (TOC) was added. At the same time, changes of microbial biomass carbon (MBC, C(mic)) and microbial quotient (C(mic)/C(org)) were opposite to the trend of pyrene degradation as the added root-exudates concentration increased. Phospholipid fatty acid (PLFA) analysis revealed that bacteria was the dominating microbial community in pyrene contaminated soil, and the changing trends of pyrene degradation and bacteria number were the same. The changing trend of endoenzyme-dehydrogenase activity was in accordance with that of soil microbe, indicating which could reflect the quantitative characteristic of detoxification to pyrene by soil microbe. The changes in the soils microbial community and corresponding microbial biochemistry characteristics were the ecological mechanism influencing pyrene degradation with increasing concentration of the added root-exudates in the pyrene contaminated soil.     

Heavy metal contamination in the vicinity of an industrial area near Bucharest

Background, aim, and scope

Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children’s health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town—Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized.

Materials and methods

Water, soil, and atmospheric deposition samples were collected from different locations within 3 km from the industrial area. For comparison, samples were also taken from Bucharest. Water samples were filtered (<0.45 μm), extracted by salpetric acid, and quantified by ICP-OES and ICP-MS. Soil samples were dried, sieved (<2 mm), extracted by aqua regia and analyzed by AAS. In order to quantify the atmospheric deposition, three kinds of permanently open collecting pots were used on nine different sites between August and November 2006.

Results

At most sampling locations, the heavy metal concentrations in soil decrease with increasing distance to the presumably major source of pollution. Highest heavy metal concentrations were found in 10–20 cm soil depths. There were also decreasing heavy metal concentrations for atmospheric deposition with increasing distance to the industrial site. In surface and groundwater samples, traces of zinc, copper and lead were detected.

Discussion

The heavy metal concentrations in soil were increased in the study area, mostly under legal action limits in low-concern areas (e.g., 1,000 mg Pb/kg dry soil), but often above action limits for high-concern areas (100 mg Pb/kg dry soil) such as populated areas. The soluble lead concentrations in water samples indicate a need for monitoring and assessing water quality in more detail. The results for atmospheric deposition showed increased dust precipitation and heavy metal loads in the study area compared to Bucharest. However, based on mass flow balance calculations, the actual atmospheric deposition of heavy metals must be much lower than it was in the past decades.

Conclusions

It was shown that highest lead values in water, soil and atmospheric deposition are rather to be found near the investigated industrial site than at the control sites in Bucharest. Our results correspond very well with results that show that children from Pantelimon have significantly increased lead concentrations in their blood compared to children in Bucharest. The increased lead contamination around the investigated industrial area is likely to have caused the increased exposure for children living in Pantelimon.

Recommendations and perspectives

In high-concern areas, such as found in populated areas, further measures have to be taken to avoid health risks for people living in these areas. The measures already taken to reduce emissions from the industrial site will help to avoid further increases in heavy metal concentrations. In areas with exceeded action limits, measures have to be taken as required by law. Detailed risk assessments could help to take necessary actions to protect public health in this area. The public should be informed about the potential hazards of eating plants grown in that area. Educational programs for schools, informing children about the contamination, should lead to a better understanding of environmental problems and a more sustainable behavior in the future.

     

Heavy metals in soils from a typical industrial area in Sichuan,China: spatial distribution,source identification,and ecological risk assessment

Anthropogenic activities could result in increasing concentrations of heavy metals in soil and deteriorating in soil environmental quality. Topsoil samples from a typical industrial area, Shiting River Valley, Sichuan, Southwest China, were collected and determined for the concentrations of Cu, Zn, Cr, Cd, As, and Hg. The mean concentrations of these metals were lower than the national threshold values, but were slightly higher than their corresponding background values, indicating enrichment of these metals in soils in the valley, especially for Cu, Zn, and Hg. The topsoils in this area demonstrated moderate pollution and low potential ecological risk. Principal component analysis coupled with cluster analysis was applied to analyze the data and identified possible sources of these heavy metals; the results showed that soil Cd, Hg, As, Cu, and Zn were predominantly controlled by human activities, whereas Cr was mainly from the parent material. The spatial distribution of the heavy metals varied distinctly and was closely correlated to local anthropogenic activities. Furthermore, the concentrations of heavy metals in the industrial land demonstrated relatively higher levels than those of other land use patterns. Soil metal concentrations decreased with the distance increase from the traffic highway (0–1.0 km) and water system (0–2.0 km). Additionally, soil properties, especially pH and soil organic matter, were found to be important factors in the distribution and composition of metals.     

Influence of lead acetate on soil microbial biomass and community structure in two different soils with the growth of Chinese cabbage (Brassica chinensis)

A greenhouse pot experiment was conducted to evaluate the impact of different concentrations of lead acetate on soil microbial biomass and community structure during growth of Chinese cabbage (Brassica chinensis) in two different soils. The field soils were used for a small pot, short-term 60-day growth chamber study. The soils were amended with different Pb concentrations, ranging from 0 to 900mgkg(-1) soil. The experimental design was a 2 soilx2 vegetation/non-vegetationx6 treatments (Pb)x3 replicate factorial experiment. At 60 days the study was terminated and soils were analyzed for microbial parameters, namely, microbial biomass, basal respiration and PLFAs. The results indicated that the application of Pb at lower concentrations (100 and 300mgkg(-1)) as lead acetate resulted in a slight increase in soil microbial biomass, whereas Pb concentrations >500mgkg(-1) caused an immediate gradual significant decline in biomass. However, the degree of impact on soil microbial biomass and basal respiration by Pb was related to management (plant vegetation) or the contents of clay and organic matter in soils. The profiles of 21 phospholipid fatty acids (PLFAs) were used to assess whether observed changes in functional microbial parameters were accompanied by changes in the composition of the microbial communities after Pb application at 0, 300 and 900mg Pbkg(-1) soil. The results of principal component analyses (PCA) indicated that there were significant increases in fungi biomarkers of 18:3omega6c, 18:1omega9c and a decrease in cy17:0, which is an indicator of gram-negative bacteria for the high levels of Pb treatments In a word, soil microbial biomass and community structure, therefore, may be sensitive indicators reflecting environmental stress in soil-Pb-plant system. However, further studies will be needed to better understand how these changes in microbial community structure might actually impact soil microbial community function.     

Effects of lead contamination on soil microbial activity and rice physiological indices in soil-Pb-rice (Oryza sativa L.) system

The effect of lead (Pb) treatment on the soil microbial activities (soil microbial biomass and soil basal respiration) and rice physiological indices were studied by greenhouse pot experiment. Pb was applied as lead acetate at six different levels in two different paddy soils, namely 0 (control), 100, 300, 500, 700, 900 mg kg-1 soil. The results showed that the application of Pb at lower level (<300 mg kg-1) as lead acetate resulted in a slight increase in soil microbial activities compared with the control, and had an inhibitory influence at high concentration (>500 mg Pb kg-1 soil), which might be the critical concentration of Pb causing a significant decline in the soil microbial activities. However, the degree of influence on soil microbial activities by Pb was related to the clay and organic matter contents of the soils. On the other hand, when the level of Pb treatments increased to 500 mg kg-1, there was ecological risk for both soil microbial activities and plants. The results also revealed that there was a consistent trend that the chlorophyll contents increased initially, and then decreased gradually with increase in Pb concentration. Pb was effective in inducing proline accumulation and its toxicity causes oxidative stress in rice plants. In a word, soil microbial activities and rice physiological indices, therefore, may be sensitive indicators reflecting environmental stress in soil-Pb-rice system.     

Effects of 2,4-dichlorophenol,pentachlorophenol and vegetation on microbial characteristics in a heavy metal polluted soil

The aim of this study was to evaluate the soil microbial characteristics in historically heavy-metal polluted soil, which was also affected by organic co-contaminants, 2,4-dichlorophenol or pentachlorophenol, which often occur due to the conventional use of pesticides. It was observed that the normalized microbial biomass (microbial biomass per unit soil organic C) of the contaminated soil was very low, less than 1% in both non-planted and ryegrass planted soil, and showed a decreasing trend with the treatment of organic co-contaminants. The microbial biomass and substrate-induced respiration (SIR) in the ryegrass planted soil were much larger, as compared with the non-planted soil with or without organic pollutants. The different resistant bacterial community and its physiological diversity in the rhizosphere further suggested that the effect of vegetation on microbial activity was not just a general increase in the mass or activity of pre-existing microorganisms, but rather acted selectively on microbial growth so that the relative abundance of different microbial groups in soil was changed. In sum, high concentrations of organic co-contaminants, especially pentachlorophenol (PCP), could strengthen the deterioration of microbial ecology. The adverse effect of heavy metal-organic pollutants on the soil microbial biomass and activity might be the reason for the slow degradation of PCP that has high chlorinated and high toxicity. Vegetation might be the efficient way to assist in improving and restoring the utilization of agricultural ecosystems. The beneficial microbial effect of vegetation could cause the rapid dissipation of 2,4-dichlorophenol (2,4-DCP) that has less chlorinated and less toxicity in the planted soils.     

Decomposition of heavy metal contaminated nettles (Urtica dioica L.) in soils subjected to heavy metal pollution by river sediments

Two incubation experiments were conducted to evaluate differences in the microbial use of non-contaminated and heavy metal contaminated nettle (Urtica dioica L.) shoot residues in three soils subjected to heavy metal pollution (Zn, Pb, Cu, and Cd) by river sediments. The microbial use of shoot residues was monitored by changes in microbial biomass C, biomass N, biomass P, ergosterol, N mineralisation, CO(2) production and O(2) consumption rates. Microbial biomass C, N, and P were estimated by fumigation extraction. In the non-amended soils, the mean microbial biomass C to soil organic C ratio decreased from 2.3% in the low metal soil to 1.1% in the high metal soils. In the 42-d incubation experiment, the addition of 2% nettle residues resulted in markedly increased contents of microbial biomass P (+240%), biomass C (+270%), biomass N (+310%), and ergosterol (+360%). The relative increase in the four microbial properties was similar for the three soils and did not show any clear heavy metal effect. The contents of microbial biomass C, N and P and ergosterol contents declined approximately by 30% during the incubation as in the non-amended soils. The ratios microbial biomass C to N, microbial biomass C to P, and ergosterol to microbial biomass C remained constant at 5.2, 26, and 0.5%, respectively. In the 6-d incubation experiment, the respiratory quotient CO(2)/O(2) increased from 0.74 in the low metal soil to 1.58 in the high metal soil in the non-amended soils. In the treatments amended with 4% nettle residues, the respiratory quotient was constant at 1.13, without any effects of the three soils or the two nettle treatments. Contaminated nettle residues led generally to significantly lower N mineralisation, CO(2) production and O(2) consumption rates than non-contaminated nettle residues. However, the absolute differences were small.     

Effects of 2,4-dichlorophenol, pentachlorophenol and vegetation on microbial characteristics in a heavy metal polluted soil

The aim of this study was to evaluate the soil microbial characteristics in historically heavy-metal polluted soil, which was also affected by organic co-contaminants, 2,4-dichlorophenol or pentachlorophenol, which often occur due to the conventional use of pesticides. It was observed that the normalized microbial biomass (microbial biomass per unit soil organic C) of the contaminated soil was very low, less than 1% in both non-planted and ryegrass planted soil, and showed a decreasing trend with the treatment of organic co-contaminants. The microbial biomass and substrate-induced respiration (SIR) in the ryegrass planted soil were much larger, as compared with the non-planted soil with or without organic pollutants. The different resistant bacterial community and its physiological diversity in the rhizosphere further suggested that the effect of vegetation on microbial activity was not just a general increase in the mass or activity of pre-existing microorganisms, but rather acted selectively on microbial growth so that the relative abundance of different microbial groups in soil was changed. In sum, high concentrations of organic co-contaminants, especially pentachlorophenol (PCP), could strengthen the deterioration of microbial ecology. The adverse effect of heavy metal-organic pollutants on the soil microbial biomass and activity might be the reason for the slow degradation of PCP that has high chlorinated and high toxicity. Vegetation might be the efficient way to assist in improving and restoring the utilization of agricultural ecosystems. The beneficial microbial effect of vegetation could cause the rapid dissipation of 2,4-dichlorophenol (2,4-DCP) that has less chlorinated and less toxicity in the planted soils.     

Changes in soil microbial biomass and Zn extractability over time following zn addition to a paddy soil

A laboratory incubation study was conducted using a paddy soil spiked with two quantities of Zn as soluble Zn(NO3)2 and unamended controls. Three single extractants (1 M ammonium acetate (pH 7.0), 0.43 M acetic acid and 0.05 M EDTA) were used to assess the bioavailability of Zn. Biological community assessments were made microbial biomass (chloroform fumigation), soil basal respiration and dehydrogenase activity. During the 84-day period of the experiment, addition of Zn at both 500 and 1,000 mg kg(-1) had little detectable effect on soil pH. The concentration of NH4OAc-extractable Zn decreased rapidly within the initial six weeks. The concentration of HOAc-extractable Zn showed no decrease during 84 days incubation. EDTA-extractable Zn was greater than NH4OAc- and HOAc-extractable fractions, and showed a similar trend to NH4OAc-extractable after incubation. Microbial biomass, soil basal respiration and dehydrogenase activity all decreased over time during 84 days incubation. Addition of Zn resulted in a significant increase in specific respiration (qCO2). Microbial biomass and dehydrogenase activity did not appear to be influenced by added Zn, probably due to the strong buffering capacity of the soil. The Zn extracted by EDTA, HOAc and NH4OAc showed close relationships with each other (p < 0.001). Zinc extracted by 0.05 M EDTA and NH4OAc were highly correlated with soil basal respiration and specific respiration rate (p < 0.01). The results suggest that NH4OAc-extractable Zn combined with soil specific respiration could be used as parameters for risk assessment.     

Heavy metals in urban soils of East St. Louis, IL, Part I: Total concentration of heavy metals in soils

The city of East St. Louis, IL, has a history of abundant industrial activities including smelters of ferrous and non-ferrous metals, a coal-fired power plant, companies that produce organic and inorganic chemicals, and petroleum refineries. A protocol for soil analysis was developed to produce sufficient information on the extent of heavy metal contamination in East St. Louis soils. Soil cores representing every borough of East St. Louis were analyzed for heavy metals--As, Cd, Cu, Cr, Hg, Ni, Pb, Sb, Sn, and Zn. The topsoil contained heavy metal concentrations as high as 12.5 ppm Cd, 14,400 ppm Cu, ppm quantities of Hg, 1860 ppm Pb, 40 ppm Sb, 1130 ppm Sn, and 10,360 ppm Zn. Concentrations of Sb, Cu, and Cd were well correlated with Zn concentrations, suggesting a similar primary industrial source. In a sandy loam soil from a vacated rail depot near the bank of the Mississippi River, the metals were evenly distributed down to a 38-cm depth. The clay soils within a half-mile downwind of the Zn smelter and Cu products company contained elevated Cd (81 ppm), Cu (340 ppm), Pb (700 ppm), and Zn (6000 ppm) and displayed a systematic drop in concentration of these metals with depth. This study demonstrates the often high concentration of heavy metals heterogeneously distributed in the soil and provides baseline data for continuing studies of heavy metal soil leachability.